Tried CUPS-PDF on Suse 11.3 86x64 (I used it since Suse 10.3 and there was no problem with appearing Virtual Printer in manager printer or YAST2 Printer) , but Virtual Printer does not appear in Printer Manager or YAST2 - Printer . Tried to configured it with YAST2 Printer unsuccessfully . CUPS-PDF or other idea for Virtual Printer .
View 9 RepliesI have PDF printer on laptop, but not on work machine. Both using 11.2.How to install it on work machine (desktop)?
View 2 Replies View RelatedI have a printer configured on my Ubuntu server using CUPS amd made it available to the local network. The printer is recognized on my other Ubuntu machine without any problems.
But on my Suse laptop, the printer is not recognized. Using the YaST printer Configuations, I choose the option "Recieve Printer Information from Remote CUPS servers. But no printer is found.But... when I choose Do All Yout Printing Directly via One Remote CUPS server and enter the correct IP address (192.168.1.100), the printer is found andI am sure the printer info is broadcasted because it shows up on my second Ubuntu PC. But why is it not recognized by default on my Suse machine
I just brought up a new server on RHEL4 to replace an existing older one. The server is using CUPS for printing. I copied the cupsd.conf, printers.conf, and lpoptions files over from the old server. I also copied the printer files in the /etc/cups/ppd directory over to the new server. But I can't get printing to work. And when I run system-config-printer-tui I don't see any of the printers in the dialog box. What other file(s) am I missing?
View 1 Replies View RelatedI have a Fedora 11 box with an HP Laserjet 1000 (connected by USB) a Windows XP machineBoth are on the same network. I am desperately trying to share the printer to the Windows XP box using IPP. The Windows XP machine recognizes the printer queue, configures correctly and then ... nothing. It simply does not print ! Printer sharing worked perfectly in Fedora 10, with CUPS 1.3, but something seems to have broken.I used the guide available at this adress and tried all mentionned possibilites
Code:
MaxLogSize 0
LogLevel info
[code]...
I'm having trouble installing 10.04, from a live dvd. The installation proceeds until 95% complete (running dpkg) then my computer shuts down. I can boot the system, but cannot download upgrades or get cups to work.
View 2 Replies View RelatedI can't access the web interface for cups to install a printer on Ubuntu server 10.4 tell me how to get it working right or i'll just throw the computer out the window and go with windows server, a much better, user-friendly product, like all Microsoft creations
View 1 Replies View RelatedI just upgraded to ubuntu 11.04 - now localhost:631 (CUPS) doesn't work anymore. However, I can still print. When I try to reload on localhost:631 I get: "Unable to connect - Firefox can't establish a connection to the server at localhost:631."
This is really really annoying. Please help. I've tried to google a lot, but I cannot see what's wrong. I've tried to completely re-install all cups-packages with synaptic, but that didn't work. Right now I think cups is running: $ status cups cups start/running, process 899 Worst thing is that previously today,
I am probably going to get blasted for this statement which is a result of four days of frustration.There are many people on here who are having problems getting their printers to work with Ubuntu. In my case it is version 10:04. I have been reading and trying fixes for four days. Nothing works.Surely this has got to the attention of the people who know what they are doing and design these programs. I sure don't know how to fix this, along with a lot of other users. We are not being lazy or arrogant. Nothing seems to work.Surely someone in the hierarchy can put in a patch that fixes this problem.The fact that Ubuntu won't print for so many people surely must be a priority inhe development of this software. So, please will one of the program developers fix this problem and send out a patch.
View 8 Replies View RelatedI know this is listed somewhere but I cannot seem to find it -
How to I add a root users to access the 127.0.0.1:631 interface for CUPS?
Running: Ubuntu 10.10
I'm in a bind and I don't know how to get what I want. Nmap shows ipp running cups on port 631. Great, simple enough I uninstall cups, along with its dependencies. A new portscan reveals that the port is closed SUCCESS, but... Ubuntu Update Manager nags me @ every restart about the "important security" updates. I can't lock the version of cups in Synaptic, because cups is not installed! So you see I'm in a bind. If I have cups installed I have an open port, and if I uninstall cups the update manager nags me. What do I do? I've tried:
- stopping the cups service and issuing the chkconfig cups off command... (doesn't close the port)
- uninstalling cups... (update manager nags)
- fuser -k 631/tcp (great, but @ reboot the port is still open)
Please teach me how to close this port / stop this service / tell update manager to shove cups.....
cups does not start with the server. When I try to start from the terminal I get the error message
cupsd: Unable to read configuration file '/etc/cups/cupsd.conf' - exiting!
cupsd: Child exited with status 1!
The log files show nothing. cupsd.conf exists. It is user - root and group - root with permissions set at 0644.
My interpretation of this is that the program is not launching from either boot or terminal for a fundamental reason. I do not quite see what that reason is .
I've been trying to figure this out for longer than I care to admit. We upgraded our print server (sysadmin) to 64 bit lucid and that moved our cups server from 1.3.7 to 1.4.3. We have a remote server that is still 1.3.7 (printhost1) but version difference doesn't seem to be relevant to the problem.
If I'm on console on sysadmin and do an lpr to a printer on printhost1, everything is copacetic. However, If I'm on a host that specifies "ServerName sysadmin" in its "/etc/cups/client.conf" access_log on sysadmin shows:
172.16.10.52 - - [22/Mar/2011:11:11:40 -0500] "POST /printers/103_hp4250 HTTP/1.1" 200 306 Create-Job client-error-not-authorized
and error_log shows:
E [22/Mar/2011:11:11:40 -0500] Returning IPP client-error-not-authorized for Create-Job (ipp://localhost:631/printers/103_hp4250) from 172.16.10.52
We've been using this method of sharing printers between locations for years and years so it not working now is a surprise.
cupsd.conf on sysadmin looks like this and is as open as I can imagine:
ServerName sysadmin
ServerAlias *
ServerAdmin webmaster
FileDevice Yes
SystemGroup staff
LogLevel info
code....
Additional symptoms are that only printers locally defined on sysadmin show up when the client uses System>Administration>Printing in gnome. Same thing when you browse printers in windows on our samba domain controller that backends on CUPS.
I just know that it's something simple that's going to make me facepalm but I'm at a loss.
I have installed Slackware 13 on one of the hard disks of my computer in order that I can get it working properly before changing over from 12.2.
My main problem is that I cannot get CUPS to change from 'Letter', which I presume is an American size, to A4, has anyone else had experience of this problem?
I cant print in firefox 3.6 by cups. Whe i go to file print i see the printers. The file is send to the wright printer. Printer crasch. I look on internet en found a solution. Firefox can only print to file. I had to add gtk-printer-backbands ="lpr,file" in /etc/gtk-2.0 in the file gtkr. and restart cups When i co to the printers i don't see the printers but only lpr. When i klik print the page wil print but only to the defualt printer. Is there a solution the fix this error. Ore how can i give the commando lpr -p printername. I try this on command line I make 2 printqueue's to the same printer and when i give echo "text" | lpr -p printername it works How can i change the gtkr file to have the posibility to slect the printers
View 2 Replies View Relatedopensuse v11.3
linux 2.6.34.7-0.5-desktop x86_64
I must have done something while wandering through the CUPS web interface but I cannot say what it was. Nevertheless, now I must enter a password every time I print a document.
1. Under openSUSE 11.2, I allowed printer sharing through CUPS by setting the Firewall to Allow Services of CUPS in the External Zone section. I don't see the CUPS option in the Allow Services of the Firewall under 11.4, any zone. Is my system missing something?2. If I turn off the Firewall, the client computer can see the printers, even get the broadcasted names. If I put port 631 in TCP of the Advanced setting of the External Zone, the client computer can see the printer too, but I know I read somewhere that putting 631 in the External Zone is basically allowing printer requests from the entire internet.
View 2 Replies View Relatedinstalled lenny and am trying to install brother dcp7010 again:
1) i can't start CUPS server with /etc/init.d/cups restart "file not found", there is a cups@ link in /etc/init.d.
2) when i install dcp7010 cupswrapper
dpkg -i cupswrapperDCP7010-2.0.1-2.i386.de
it ends with
" lpinfo: Verbindung zum Server nicht m�glich: Verbindungsaufbau abgelehnt
lpadmin: Verbindung zum Server nicht m�glich: Verbindungsaufbau abgelehnt"
(connection to server not possible, refused)
3)[URL] doesn't work.
4)foomatic-gui can't find the installed dcp7010 lpr-driver
brdcp7010lpr-2.0.1-1.i386.deb, (a couple of days ago it did)
This is frustrating because it worked in etch and worked for awhile in lenny. The dcp7010-scanner does work.
I have an HP J6480 "all in one" printer, suse 11.2, hplip, wireless network, the printer only prints when I start the printer que each session using the root user ... where do I find the instructions to setup the printer que in cups or is there a setting in hplip that does this?
View 1 Replies View RelatedWhere is the virtual PDF printer for cups? On debian it is called cups-pdf.
View 3 Replies View RelatedWhen I go to the kickoff menu and select the Cups Web Management, it just keeps openeing konqueror windows until I logout!
View 3 Replies View RelatedI've just installed 11.2 KDE 64bit and I'm having trouble getting CUPS setup. I have a hp5440 deskjet that is not listed but I have used another model in the past with another distro. But when I put in my username and password it doesn't take it. there is no other password. How do I set up CUPS? Can I used hplip instead?
View 3 Replies View Relatedi'm using a Lexmark Pro 905 printer , it's a local printer with Ethernet connection to the pc.I installed the driver and this used to work on 11.2, now with openSUSE 11.3 it's not working. THe yast test page comes out but nothing is printed from open office.I opened port 661 UDP in the firewall but still no result comes from open office.I then added the printer in cups but i still have an error and no print : ( cups-1.4.4-2.3.i586 )
Lexmark_Network_Backend_1
Lexmark Pro800-Pro900 Series
Local Printer Lexmark Pro800-Pro900 Series, 1.0
[code]....
Is there a setting to auto-resume stopped printers? I believe to remember that the CUPS configuration file had an option for setting a time interval to retry and restart printers, but I cannot find it any more, nor something similar in the [URL] dialogues. We have an old ink jet connected by USB to a laptop docking station, which is used by my wife and myself. Currently, we always have to go to the CUPS page after docking and resume the printer manually, whenever we "scheduled" a printing job while being undocked. (Yes, I do have a dedicated box that could also act as a convenient print server, allowing us printing over the local wireless network, but after rearranging our living spaces, I am not allowed to place the printer within an USB-cable's length next to that box. it's complicated.
View 4 Replies View RelatedI have a CUPS server with several end users. The problem is that the printer stops printing if someone trys to print in letter size. (You have to insert letter paper or abort the print job on the printer.)
No, I'm looking for a way to force printing jobs to A4 paper size.
how to do this? Maybe with custom cups filters, but I don't know how this is done.
Ok have setup my printer under suse 11.3 just fine and printing perfectly, and have added the printer to a windows 7 client, but had to get the disk to install the windows driver. Is there any way that i can put the windows driver on the linux machine so that when i go to a windows client and want to add the printer, i can just connect to the printer and the windows driver will be installed over the network like it does with windows servers?
View 4 Replies View RelatedI have installed the cups-pdf package from the opensue 11.2 site and found an second printer in the config page od cups. I tried to print to this PDF called printer, but the cups-pdf printer doesn't create any files or user dirs in the default spool directory /var/spool/cups-pdf. CUPS respoces that jobs finished without errors. I have no idea what I made wrong. code...
View 2 Replies View RelatedI have a Canon i560 printer, which is rather well supported by Gutenprint drivers. I have been using those for a while and they serve my regular printing needs. However, when I try to print a good quality photo on glossy photo paper, strange stuff happens.The colour doesn't come out nice, but somewhat faded. Worse, no matter how I specify that I want to make a print on 10x15 glossy paper, the actual print is always cut off, printed landscape when I specify portrait, etc. The printer is shared via CUPS and when my wife prints from her Windows XP machine, the printer works normally and the colours look brilliant so there's no problem with the machine itself, it has to be in the driver.
I googled this problem extensively and in my search, I found out that Canon does in fact have a Linux driver for this printer, though it can't be found through their website. It is on their ftp server, however: ftp://download.canon.jp/pub/driver/bj/linux/I installed the driver from there, following instructions that I found on the web and I have the printer working. But...the photo paper size that I want to print on (10x15 centimetres) isn't available in the ppd file. I can also not specify a custom paper size to print on in digikam or gwenview, since that option is greyed out...Since a ppd file is a text file, I decided to see if I could add a custom paper size. I googled some more and found this page: Adding Custom Paper Sizes to a Custom Printer File Using a Text EditorWith the help of that page, I thought I had it nailed. I added the following to my ppd file:
*PageSize photo/Photo 10x15: "<</CNPageSizeName(photo)/PageSize[283 424]ImagingBBox null>>setpagedevice"
*PageRegion photo/Photo 10x15: "<</CNPageSizeName(photo)/PageSize[283 424]ImagingBBox
[code]...
Updated to CUPS 1.4.3 from printing repository and was getting this while page test printing:
Code:
/usr/bin/lp: Unsupported format 'application/postscript'!
Downgraded to 1.3.11 and it was solved.
openSUSE 11.2 x86_64, KDE 4.4.3
With the printer I am using, the text always extends part of the way into the margins, resulting in it getting cut off. Is there any way to change the margins for a printer?
View 7 Replies View Related