I could connect to the samba server, say, there are 3 dirs, and when I clicked any one of those dir, errors come to me, the process for the smb:// protocol died unexpectedly...
I updated Samba to 3.5.1 as shown in: Fixing "Authorization Dialog" bug in Samba for 11.2 - openSUSE ForumsWhen I copy files between two copies of Samba in two openSUSE 11.2 PC's with the new update, I get Samba Process Unexpectedly Died (in Dolphin). This happens going from Computer 1 to 2 or 2 to 1, it does not matter and the error is the same.
After reverting back to Samba version 3.4.2 in both PC's, all files copied between PC's work fine again. Though the "Authorization Dialog" bug is gone, not all seems right with the newest update version.
Installed from the 9.1 iso got everything set up all tickety boo. using it as a local development server. have been ignoring the update manager, but today for some reason I thought ok, do your thing fatal on restarting it gets as far as the splash screen then dies " * could not access PID file for nmbd" hit esc to get the grub thing up and tried recovery mode same deal so stuck really.
I can hit 'e' and get a basic emacs thing wit a few lines of commands, but not sure what to do there!
I'm not a big terminal user. I can do stuff I need to and leave it at that. Do I have to flatten this machine and re-install anything. Loathe to do that as I spent quite a while getting all the webby bits installed and working as I want to, adn don't really want to have to set all that up again.
If I run Fedora as the latest kernel which was updated. My nVidia driver will not load. I log into Gnome or KDE or XFCE all come back with a white screen. Now I have a feeling I need to recompile the nVidia driver for the newly updated kernel. Am I right? If yes how does one do so. If I'm wrong any other ideas.
Just as a note if I boot up into an earlier kernel. My card loads and compiz works and everything is fine.
I tempted those computer gods the other day by saying Fedora 11 was perfect and I was starting to feel at home with it like I used to in Ubuntu. Now I have incurred there wrath.
I've been using Fedora 15 since its release (it was a fresh install) and have run the built-in updater three times; the third time being just earlier. In running it, about 113 updates were found, and afterwards, I rebooted. Unfortunately, GNOME 3 somehow broke as a result of that update (I didn't do anything else system-wise in the meantime), though I'm not sure what could have caused it.
After logging in, I see nothing except my desktop wallpaper. The top bar doesn't exist, and there are no workable elements... a wallpaper and nothing but. Thinking it might have been a user issue, I created a new user under Xfce and then logged into it, and I had the same thing. Default wallpaper but nothing else.
I am actually in the process of reviewing Fedora 15 (and GNOME 3) and was nearly done writing what I needed to before this happened, so I'd love to figure out a way to fix it rather than reinstall the entire OS since I have things set up to my liking and would hate to have everything undone.
If it helps, I did a yum groupremove of "GNOME Desktop Environment" and then a groupinstall of it again, but that didn't help it either. It did ironically remove both KDE and Xfce I had installed, however.
I installed a routine update through the update manager this morning and when the next time I turned my laptop on neither my graphics driver or my wirless driver were working. When I turned my laptop on I got an error saying:
Ubuntu is running in low graphics mode. The following error was encountered. You may need to update your configuration to solve this. (EE) NVIDIA: Failed to load the NVIDIA Kernel module. Please check your systems Kernel log for additional error messages. (EE) Failed to load module "nvidia" (module-specific error, 0) (EE) No drivers available
After clicking ok to this message I get another with a series of options about how to resolve this ranging from troubleshoot to restart to run in low graphics just once. Once I open the session my wireless won't load up, but I can still connect to ethernet. I'm using a 3 year old HP pavilion laptop running Lucid Lynx. I'm not sure if this problem is related to the update, but it's the only thing that happened out of the ordinary before I ran into this problem. Unfortunately I cannot remember what was included in the update.
I just recently setup a OpenSUSE 11.3 server with Xrdp which I got from the 11.1 tutorial. Everything had been working great until yesterday I let the system run a update and now whenever I try to login I get login failed. When I look in xrdp-sesman.log file it says X server died. I've searched around for this problem and it seems there is some talk about it from a few years back but nothing as of recent and nothing that has worked so far. I'm kinda at a loss with this and really would like to get it up and running again.
i'm still relatively new in using linux and is quite enjoying using fedora, however, upon restarting my computer I get this message on almost anything related to browsing my files..."The process for the file protocol died unexpectedly."the programs i'm talking about include dolphin, amarok, ktorrent and ksnapshot (well those are the ones i've checked, i thing there are more apps having this problem...)sample screenshot: the weird thing is, when i do "kdesu dolphin" for example, the problem doesn't occur.sample screenshot:My desktop folder is also experiencing the same problem.
It was no surprise that I needed to reinstall the nvidia driver after a 2.6.32-5-686 kernel update a couple days ago, but I was surprised that it didn't work. I've had to drop back to a kernel I compiled a few weeks ago, which is basically the stock 2.6.32-5-686 from that time, with a timer frequency of 1000 and desktop preemption. Vid card is GeForce PCX 5750 Using NVIDIA-Linux-x86-173.14.22-pkg1.run
This is the command I used: env CC=/usr/bin/gcc-4.3 sh NVIDIA-Linux-x86-173.14.22-pkg1.run (After it didn't work, I ran it with --uninstall and tried installing again. No luck with that.)
Here's the nvidia installer log (sorry about the encoding. I don't know what happened with that): [URL] rivafb, nvidiafb and rivatv are not loaded.
I don't see it in this one, but on a previous attempt, I saw an error message that said no nvidia graphics card was found. I've been suspicious that the card is slowly dying, based on problems like gray blocks on the screen or (in an older lenny install) persistence of the contents of a window appearing inside a terminal, when I switch desktops from the one where the browser is open to the one where the terminal is open. Scrolling the artifact off-screen and back, or window-shading the terminal and then un-shading it causes it to re-draw correctly.
For a diskfull node (the OS installed in a disk), I can use the 'insmod' command to insert a kernel module into the kernel. And after the reboot, the module is still in the kernel. I have a question here: how, when and which kernel module will be loaded in the boot up process for a diskfull node?And for the diskless node, can I use the chroot or some other ways to install the kernel modules into ramdisk, so that kernel module can work when the diskless node boot up? I think it needs certain mechanism to load the kernel like the boot up of diskfull node.
im dual booting ubuntu and win7 (i installed ubuntu using wubi)yesterday i ran the update manager and i noticed it installed a kernel update.since then, whenever i reboot i get the boot loader menu asking me to choose between win7 and ubuntu, but when i choose ubuntu, instead of the regular menu that asked me which kernel version i wanna use i get a command-prompt-like interface with the title:
I let the update manager complete the weekly update and after restarting, Skype will not load. I attempted to troubleshooting Skype found in the Ubuntu documentation, but it does not appear valid for Ubuntu 10.10 amd-64. [URL] fails to start
After an update firefox doesn't load anymore. Whenever I try to install anything apt-get fails and warns me about broken firefox packages. It is mentioning firefox branding and chrome something (the latter seems to have gone away after I removed firefox via synaptic) apt-get install -f fails also.
The computer I am using now for whatever reason, like picking a lottery number likes to either freeze or reboot for no reason that I can ascertain with any predictability.
I was in the middle of the Ubuntu install when my computer rebooted.
I have a 250GB HD and selected the 1st option side by side with XP. I slid the slider to give XP around 80GB and Ubuntu the rest.
The installation was going great (nice job on the installation program btw; I can tell lots of people worked very hard on this) and I was at the 85% mark when the computer decided to do its nasty little thing and rebooted.
Does anyone know from the OS internals during the installation process what is happening at the last 15% of the install? I have not shut my machine down or changed the BIOS from booting with the CD. So at this moment that I am writing this I am not sure what has happened. I am hoping that it did not clobber the MBR. If I can't get into XP any more that would be less than enchanting.
The machine came back up and booted off the CD and I proceeded to go through the installation process again to complete the installation process.
Now its trying to install another copy of itself because it senses that there is two Operating Systems on my hard drive. This is understandable. How would the installation program know that the machine died. Much of the OS had been written already so the installer "sees" two OS's.
Currently, I have a situation where I now have two smaller partitions; one used by XP and the other one that contains this incomplete installation (I am actually working within Ubuntu right now) and aother partition that is empty.
I have Jaunty 9.04 and I was sitting online yesterday and the update manager came up. I let it do its thing as usual, but it seemed to have an issue with some firefox related package (having to do with branding?) and then the little flipping-out icon showed up in my tray saying that a package broke. It did not, and the firefox launcher turned into a missing puzzle brick and clicking it causes a small window to come up with the following message:
XML Parsing Error: undefined entity Location: chrome://browser/content/browser.xul Line Number 31, Column 1:<window id="main-window" ^ So I might have tried to uninstall firefox from synaptic or something, but this just created more errors and I don't think it worked properly anyway. Inside Synaptic, there is one listed as a "broken" package in the broken filter. It is something to do with Firefox Branding AMD64 and all that goodness.
I just installed Lucid Lynx on my Dell Vostro 1000 laptop. The problem I'm having is that my wired network card has died on me prior to installation. I'm having the hardest time finding the required files to make my Broadcom BCM4311 wireless card work without being able to download any packages from the web. If anyone knows which files I need and which order I should use to install them that would be great.
Whenever someone copies a data Our system get very slow. Load average of system starts increasing. How would i find which process is causing the same. I have tried following top 10 CPU utilizing process command but it didn't help much.
Code:
ps -auxf | sort -nr -k 3 | head -10
My distribution detail.
Code:
# lsb_release -a LSB Version: :core-3.1-ia32:core-3.1-noarch:graphics-3.1-ia32:graphics-3.1-noarch Distributor ID: EnterpriseEnterpriseServer
There are around 173 zombie process on my client's server, my question is whether zombie process on the server will make server's load unstable like it goes to 20-26 suddenly and comes down and goes high suddenly,will zombie process consume system's resource?..
recently i setup new LAMP server , after some days faced a strange problem? suddenly the server load goes to 100 or 80 but there is no wearied process running? the normal lod is between 0.5 to 1.5? the server have 2 hdd on hardware raid 0
After 2 months away from Fedora i am using it again, and used yum update to update stuff, everything was running fine, downloaded stuff, but 2 of the 666 stuff to install got error, here is:
I'm new to the linux world and its been quit sometime since i've done any programming. However, I'm writing a program which simply calculates the load average of a process. In doing this I need to use the uptime command for linux in a java program. I've done a little bit of searching on the net and it mentions this is possiable by using java runtime command. Unfortunatly though I have yet to find a working example of this. I've tried just simply reading the /proc/uptime file but I have no clue how to format the 2 numbers in seconds to make it the same as if you just typed in uptime in the linux command prompt.
I have a server and i think that my server is under Ddos attack. i see that server is not having much load and only few process runs but my site opens very slow. i executed the following command on my ssh:
I'm trying to install Ubuntu (9.10) on my sisters computer. I have installed ubuntu 9.10, but when I try to boot it from hard drive, it would stop loading a bit after the logo appears. The screen would turn off while the system is still running. Live version of Ubuntu works after reports of errors. I tried to search for the problem all over the forum, and could not find a good lead to figure out the problem.
So far to figure out the problem, I verified if cd is corrupted. No issues there. Googled the problem, and seems like other users were able to install 7.04 (old posts). Its so weird though that live version works and the installed version does not.
Here are my specs:
I can post logs, but I'm not sure which one is useful as I'm relatively new to this process.
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
I have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,
$ /etc/init.d/httpd start then this $ /etc/init.d/httpd graceful
I allowed the UNR on my wife's Asus 1000H netbook to update to 10.04 and even updated since but the GRUB menu screen just keeps reloading itself if I select XP. We still need XP... at least for the time being. We can access the NTFS partitions still.
Now if I download UNR and do a clean install will that fix it?
Should I just remove the HDD and reformat it completely on another computer and reinstall both OSs?
Should I reinstall UNR 9.10? (I've heard there are power consumption problems with 10.04 anyway.)
I installed a load of recommended updates yesterday and shut down my system last night. Tried to start it again this morning and it won't load for me. The wallpaper appears, but no GUI (no top or bottom bars) and no cursor. The only thing I've managed to do is Ctrl+Alt+Del to open the hibernate/shut down/reboot options.
