I could connect to the samba server, say, there are 3 dirs, and when I clicked any one of those dir, errors come to me, the process for the smb:// protocol died unexpectedly...
View 4 Replies
i'm still relatively new in using linux and is quite enjoying using fedora, however, upon restarting my computer I get this message on almost anything related to browsing my files..."The process for the file protocol died unexpectedly."the programs i'm talking about include dolphin, amarok, ktorrent and ksnapshot (well those are the ones i've checked, i thing there are more apps having this problem...)sample screenshot: the weird thing is, when i do "kdesu dolphin" for example, the problem doesn't occur.sample screenshot:My desktop folder is also experiencing the same problem.
View 1 Replies View RelatedI updated Samba to 3.5.1 as shown in: Fixing "Authorization Dialog" bug in Samba for 11.2 - openSUSE ForumsWhen I copy files between two copies of Samba in two openSUSE 11.2 PC's with the new update, I get Samba Process Unexpectedly Died (in Dolphin). This happens going from Computer 1 to 2 or 2 to 1, it does not matter and the error is the same.
After reverting back to Samba version 3.4.2 in both PC's, all files copied between PC's work fine again. Though the "Authorization Dialog" bug is gone, not all seems right with the newest update version.
I started the update process in my new Ubuntu Studio install.
My understanding of the update process is:
1) Downloads all of the update files (in my case 214)
2) It performs the necessary installation of these files.
My machine locked up at the 70% done part during step 2.
Now, when I try to boot/load the OS it stalls at the splash screen.
I am not even sure I can get to the recover part from Grub yet, but if I can...
Is there a command that can start the update process without having to download the data again?
I installed slackware 12.1 from files i downloaded and converted to cd (images). There are six "disks" i downloaded from the slackware site and converted to images via a homemade .cmd in windows xp and then burned using imgburn.
I partitioned my hd (canibalized from an acquaintance's emachine and connected it to my desktop (1G ram, 2Ghz processor). Booted from disk 1 and fomatted the 80G HD for 2 partitions of linuxswapable at 2G apeice and 2 partitions of bootable linux. (Because i want to try another distro later). I ran the setup installing most everything and all seemed to go well. After i exited setup and restarted, it identifed the cd/hd as normal and then went into some sort of recovery mode with the emachine logo call pcangel, after which it tells me.
STOP: c0000021a (fatal system error) The session manager initialization system process terminated unexpectedly with a status of 0xc000003a (0x00000000 0x00000000). the system has been shut down. So, is this indeed an xp error message, and if so, why am i getting it after formatting everything?
I have installed slackware 64 current in my PC from an ISO CD I downloaded from one of the mirrors. Everything was all right exept I wanted to get the last upgrade doing : slackware update slackware upgrade-all When I tried to reboot I had a black screen after X server started. Then I decided to edit xorg.conf to it's default before I installed the NVIDIA driver. So I got my screen back. I reconfigure my desktop running NVIDIA setting to the resolution and font I prefer. But my keyboard layout is still querty when I configured it to azerty. When I run system settings and Regional & Languages I get an error :
Quote:
KDE keyboard Layout switcher closed inexpectedly....report this error....
How can I enter command key to change the keybord layout to French ?
I was just mucking about in xfce, trying out new window buttons in conjunction with the black theme - dusk?? - when POW! - X shut down. Rebooting didn't restore things. Error is along these lines:
xfce4-session: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0. xfwm4: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
[Code]....
Is there a config file I can edit to get away from the window button setting it dislikes, or is reinstalling xfce the only option?
I am on my Debian system right now because of issues after compiling Linux 2.6.35, I followed Alien Bob's tutotorial, but obviously I missed something. I added 2.6.35 to my lilo.conf file, I tried to boot to it, but dhcp wasn't working, then I tried a startx and KDE would not load. No problem right, I will just boot my original Slackware Linux kernel.
I booted to the original, DHCP worked great but when I do a startx, I just get a black screen. Here is some of the terminal output.
Code:
No protocol specified
waiting for X server to begin accepting connections.
No protocol specified
[code]....
It's hard to get some of the output because I am looking at the other screen and typing this.
I downloaded Slackware64-current to give it a try on my laptop and all went well as usual. However when trying to connect to another computer from Dolphin via sftp I was informed that sftp is an 'invalid protocol'. I can use ftp, though. Same thing happens with Konqueror. Using Konsole I can successfully start sftp, although that is not exactly what I want or need. For me, this is really a major problem as my office computer can only be accessed at home via secure shell. I need to be able to upload/download files and folders from there and from other machines. I wasn't really aware of how heavily I depend on this until now. Has anyone else run into this problem? If so, is there a fix or a workaround?
View 3 Replies View RelatedIt repeats 8 times in the kernel log.
Code:
BUG: Bad page map in process sshd pte:7e7f8080807e7f80 pmd:2be86067
addr:00007f2577800000 vm_flags:08000070 anon_vma:(null) mapping:ffff88007f55cd08 index:f4
vma->vm_ops->fault: filemap_fault+0x0/0x460
[code]....
During my startup I saw this line; Code: err, eth0: netlink: No such process My internet connection went down when I log on to my system.Any idea on this problem.I use realtek RTL8211CL network card,the built-in network card in my inspiron 1440.
View 3 Replies View RelatedI upgraded to current, and x won't start... I suspect it's probably an issue with the Nvidia drivers (I forgot to swith my xorg to the nv drivers; I knew I'd be getting a new kernel). Anyway, it leaves me with an unusable computer. Is there anyway I can get into a console before x tries to start. BTW, the ctrl-alt-f1 hotkey isn't working.
View 4 Replies View RelatedI have 2 Slackware installs at home, both tracking -current. When 13.37 is officially released I'm considering changing one of those to remain as "stable" for general family consumption. My question is...when the next release comes, how painless and/or successful is the upgrade process. Yes I know of the detailed upgrade instructions by Pat V, and I know I'd have no difficulty executing them.
View 5 Replies View RelatedI was wondering if anyone can tell me what file, etc is the equivalent of ARCH's /etc/rc.sysinit? I need to know this because I am having many problems making the new nfluxos iso's for ARCH because of how ARCH now mounts stuff at bootup
due to whatever changed in udev or udisks or something else in ARCH now, when I make the system into a livecd it doublemounts everything when booting for example; output of "mount" in nfluxos with 3.4squashfs udev 151
Code:
[root@nfluxos ~]# mount
rootfs on / type rootfs (rw)
aufs on / type aufs (rw,relatime,si=4ce08f22,nowarn_perm)
none on /proc type proc (rw,relatime)
none on /sys type sysfs (rw,relatime)
[Code]...
I am unable to complete the installation of Slack 13.0 on a new machine with Intel DH55HC motherboard and Intel Core i5 750 processor. The installation proceeds smoothly until the 3'rd CD and then hangs at the FONTCONFIG UPDATE stage. The hung process is apparently rescan-scsi-bus which reaches this stage
"Scanning host 6 channels 0 for SCSI target IDs ....
"Scanning for device 6 0 0 0...
"NEW:
It is not possible to kill this process even with "kill -9". I have to kill the parent process which is Slack setup, so the installation is incomplete. There is another recent thread on this issue [URL] but it did not resolve my problem. How to correct or bypass this difficulty (maybe another kernel? I use the default).
Slack is 32bit. Frequently, firefox becomes unresponsive. I can close the window, but the process is not terminated. I am not able to restart firefox without rebooting.
When this problems occurs the firefox processes are not terminated by the 'kill' command. Example
Code:
tim@bart:/home/http/run/baker/cron$ ps aux | grep firefox
tim 3780 0.0 0.0 3356 1640 ? S 15:59 0:00 /bin/sh /usr/bin/firefox
tim 3792 0.0 0.0 3404 1696 ? S 15:59 0:00 /bin/sh /usr/lib/firefox-3.5.2/run-mozilla.sh /usr/lib/firefox-3.5.2/firefox-bin
tim 3796 0.3 3.2 316560 95712 ? Sl 15:59 0:21 /usr/lib/firefox-3.5.2/firefox-bin
[Code]....
I'm excited to try the new 2.0.1 version of Guile. I'm running Slackware64 13.37 and the latest version of Guile distributed with it is 1.8.8. I see that this new version, as part of it's new capabilities, has a few new requirements. I have built and installed libffi, libunistring and libgc according to their install instructions, but Guile's configure script can't find them.
I have tried manually creating libffi.pc libunistring.pc and libgc.pc files, which has allowed configure to get past the first two, but I still can't determine the correct name for libgc. Further, I am now not confident that Guile will find these where it expects to find them in the end. I would like to ask for some clarification of the install process for this new version of Guile, but I'm not sure whom to ask.
this is not specifically a slackware related question, but since done on 2 slackware boxes... the situation is, i have one box for browsing and other desktop activities and another box acting as router/local server. what i want to achieve is that the router box would look on a nfs mounted folder for new *.torrent files (which i put there from the desktop box) and if there is a new file, it would start downloading it automatically. also a good thing would be if it would notify me when finished.so how would you go about itwhat torrent client would you use and so on? maybe someone has already done something like this?
View 4 Replies View RelatedEvery time I try to execute a .exe file it says
Code:
Failed to execute child process
but when I type wine and the file it says
Code:
bash-4.1# wine
bash: /usr/bin/wine: No such file or directory
When my system boots it hangs at
Code...
and hangs for another 120 seconds. In X11 I have no sound at all even after running alsaconf with no errors. My sound works perfectly in Ubuntu, so it's not a hardware problem. Are the two problems related or are they two separate things? Any help here would be hot.
I have a java process running in background. I have no java dependent program opened and even if I had, this program should be killed if I kill the Java process. top shows that Java causes almost 90% cpu usage.
[Code]...
The only way I can imagine is to restart, but this might happen again.
Where do I change the option to have samba start during the boot process? I've googled and I've found old posts that say it's a line in /etc/rc.d/rc.inet2 but in my semi-current box, I don't see the part about starting stopping the samba server.
View 5 Replies View RelatedHow do I delete all the .orig config files after I go throught the following process?
slackpkg update
slackpkg install-new
slackpkg upgrade-all
What is the best method for debugging the booting process? Is there a cheatcode (tried debug and failsafe). Slackware 13.1 with standard linux kernel 2.6.35.8. I having a problem with a dell server 2860 booting my build. It is hanging on
[Code]....
Booting my previous kernel 2.6.27.27(different disk with different initrd.gz) it loads the same as above but continues with
Code: loading iSCSI transport class v2.0-870 iscsi registered transport tcp I'm stumped it the problem is with the ata_piix module or the iSCSI transport module or some firmware I might be missing. I booted other pcs without issue.
If I run Fedora as the latest kernel which was updated. My nVidia driver will not load. I log into Gnome or KDE or XFCE all come back with a white screen. Now I have a feeling I need to recompile the nVidia driver for the newly updated kernel. Am I right? If yes how does one do so. If I'm wrong any other ideas.
Just as a note if I boot up into an earlier kernel. My card loads and compiz works and everything is fine.
I tempted those computer gods the other day by saying Fedora 11 was perfect and I was starting to feel at home with it like I used to in Ubuntu. Now I have incurred there wrath.
I've been using Fedora 15 since its release (it was a fresh install) and have run the built-in updater three times; the third time being just earlier. In running it, about 113 updates were found, and afterwards, I rebooted. Unfortunately, GNOME 3 somehow broke as a result of that update (I didn't do anything else system-wise in the meantime), though I'm not sure what could have caused it.
After logging in, I see nothing except my desktop wallpaper. The top bar doesn't exist, and there are no workable elements... a wallpaper and nothing but. Thinking it might have been a user issue, I created a new user under Xfce and then logged into it, and I had the same thing. Default wallpaper but nothing else.
I am actually in the process of reviewing Fedora 15 (and GNOME 3) and was nearly done writing what I needed to before this happened, so I'd love to figure out a way to fix it rather than reinstall the entire OS since I have things set up to my liking and would hate to have everything undone.
If it helps, I did a yum groupremove of "GNOME Desktop Environment" and then a groupinstall of it again, but that didn't help it either. It did ironically remove both KDE and Xfce I had installed, however.
My laptop Dell Inspiron 1420 running Ubuntu 10.10 has started logging itself out every 30-60 minutes or so. I am trying to figure out what is the problem. I am wondering if it is
1) a hardware problem. I have recently replaced the cooling fan which required disassembling the whole thing into small pieces. The computer has worked without a problem for one day after the repair.
or
2) a problem with a recent update. The computer started logging itself out after a recent update. This coincidence is suspicious, but I hasn't noticed anyone reporting a similar problem with Ubuntu 10.10.
Is there a way I can see what is happening through the system log? What would be the keyword I should look for in the log files?
Can I track the last updates I have applied and roll them back?
The only solution I see now is to reassemble the laptop to see if it helps.
I've been running Fedora 12 for a few weeks on a laptop, and was just starting to get things the way I like it ... and last night as I was trying to unlock the screen using the fingerprint reader (which had always previously worked) the system became unresponsive and there was nothing I could do but push the power button. Now it will not boot up, I get one cursor flash when it's at the grub stage and then the screen goes dark, there is no hard disk activity. He's dead jim.
I'm a bit gutted and would like to recover this system if I can, rather than install something else over the top. I booted using an ubuntu live cd and mounted the lvm, and got into the /var/log/messages. The last entries in there before it crashed and burned are as follows:
[Code]...
I just recently setup a OpenSUSE 11.3 server with Xrdp which I got from the 11.1 tutorial. Everything had been working great until yesterday I let the system run a update and now whenever I try to login I get login failed. When I look in xrdp-sesman.log file it says X server died. I've searched around for this problem and it seems there is some talk about it from a few years back but nothing as of recent and nothing that has worked so far. I'm kinda at a loss with this and really would like to get it up and running again.
View 3 Replies View RelatedInstalled from the 9.1 iso got everything set up all tickety boo. using it as a local development server. have been ignoring the update manager, but today for some reason I thought ok, do your thing fatal on restarting it gets as far as the splash screen then dies " * could not access PID file for nmbd" hit esc to get the grub thing up and tried recovery mode same deal so stuck really.
I can hit 'e' and get a basic emacs thing wit a few lines of commands, but not sure what to do there!
I'm not a big terminal user. I can do stuff I need to and leave it at that. Do I have to flatten this machine and re-install anything. Loathe to do that as I spent quite a while getting all the webby bits installed and working as I want to, adn don't really want to have to set all that up again.
