Ubuntu Installation :: Unable To Install Data Display Debugger In 10.4?
Mar 13, 2011
I am trying to install DDD on ubuntu 10.4. Downloaded the tar.gz file and followed the instructions given on DDD web page.But I am not able to install DDD. While trying to do './configure && make' I get the following error. It says c++ is not working and is not able to create executables. I have g++ installed and I successfully create excutables from .cpp files. I've also checked the CXX variable and it is set to /usr/bin where g++ is expected to be placed.
root@tirth-laptop:/home/tirth/Downloads/ddd-3.2.1# ./configure && make
loading cache ./config.cache
checking host system type... i686-pc-linux-gnu
[code]...
View 1 Replies
ADVERTISEMENT
May 6, 2011
I just installed 11.04 and found that the debugger gui, kdbg, is no longer in the repositories. I have all repos enabled except backports. I also tried to find any information about the fate of kdbg, whether it is just not yet packaged for 11.04, or whether it is discontinued, but to no avail.
If it is being discontinued, I'll probably roll my own .deb package and post it somewhere - kdbg is too good to drop, I think. And while we are at it?
View 5 Replies
View Related
Jul 19, 2010
install immunity debugger on system and found it very diff?
View 2 Replies
View Related
Jan 26, 2011
I'm trying to install Ubuntu Netbook Edition 10.10 on my Eee PC 1015PE. but it appears that GParted which is used to partition the HDD is unable to successfully display partition table, it just shows that /dev/sda is all unallocated, and it offers just to create new partition table.
View 7 Replies
View Related
Jul 10, 2011
I used the zypper dup tool to upgrade my HP Pavilion dv6000 laptop and my display is now broken into columns and partially obscured. I can barely see anything on it. When I ran zypper it stopped about half way and locked up.I then ran it again to completion. At boot, GRUB gives me my startup options as before and is clearly readable with good resolution. When I select openSuse to start it, the screen goes blank for a few seconds and then comes back with the screen problems.
The problem continues all the way into KDE. I have approximately four columns displayed but I can barely see anything. Most of the lower half of what should be displayed is obscured so I cannot load any applications. If I right click, I can make out the dialog box and select the run command. From there I reran the zypper command using the 'zypper up rpm' option and it says "nothing to do" and the "highest update version is already installed."
The display problem also exists if I use the failsafe boot option. I remember having to download nVidia driver last year to get a better resolution, but 11.2 (64 bit) worked great until the repositories stopped working and I no longer was able to load software. Now I can't use the computer to download and burn a DVD version of 11.4. Again, I do seem to be able to use the terminal, so I could presumably fix something with it if I had the right commands and I do seem to have access to the repositories.
View 2 Replies
View Related
Aug 5, 2011
I need to recover some data of the 'home' directory after kernel panic.I was upgrading ubuntu 11.04, [COLOR=blue !important][COLOR=blue !important]installed[/COLOR][/COLOR] on usb.Failed to upgrade because the main partition had no more space. I moved one directory of about 100Mb to other partition, but it seemed that in the main partition didn't appear those 100Mb free. i restarted the computer expecting those 100Mb free. And kernel panic.
[ 0.789567] Kernel panic - not syncing: VFS: Unable to mount root fs on unknow-block(8,1)
[ 0.789646] Pid: 1, comm: swapper Not tainted 2.6.35-22-generic #33-Ubuntu
[ 0.789716] [<c05c6468>] ? printk+0x2d/0x35
View 2 Replies
View Related
Aug 8, 2010
When I am installing texlive package power gone suddenly. From that time onwards yum update command is not working. It is giving error as follows:
Loaded plugins: presto, refresh-packagekit, security [URL]: [Errno 14] HTTP Error 404 : [URL]
Trying other mirror.
Skipping security plugin, no data
Setting up Update Process
Resolving Dependencies
Skipping security plugin, no data
--> Running transaction check
--> Processing Dependency: libkpathsea.so.4 for package: evince-dvi-2.30.3-1.fc13.i686
---> Package texlive-kpathsea-doc.noarch 0:2010-8.svn19287.fc13 set to be updated
--> Finished Dependency Resolution
Error: Package: evince-dvi-2.30.3-1.fc13.i686 (@updates)
Requires: libkpathsea.so.4
Removing: kpathsea-2007-51.fc13.i686 (@updates)
Available: kpathsea-2007-49.fc13.i686 (fedora)
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
I already tried this commands but again I have problem:
yum-complete-transaction first
rpm -e texlive
yum install libkpathsea.so.4
View 2 Replies
View Related
Mar 8, 2010
How do i use the Debugger in Linux. I am using Vi editor and terminal.For C and C++ programs.2. Any great tutorials or link.3. Is there any C and C++ IDE similiar to VC++? Were I can set breakpoints etc?4. Is makefile the option to compile multiple files while using Terminal for compiling?I would be delighted if someone can point me a valuable guide or book.
View 4 Replies
View Related
Apr 14, 2011
I've been using Eclipse PDT with Zend Debugger to debug my PHP web scripts for a while, but after installing Ubuntu 10.04, I've been having issues setting up the development environment again.
I have installed Apache 2.2.16 and PHP 5.2.14 manually.
Eclipse was installed from the Synaptic Package Manager. I installed the Zend debugger and PDT for Eclipse under Eclipse's Help -> Install New Software.
Yet whenever I try to debug a web script it executes the script without stopping at any of my breakpoints. The debug window immediately shows the debug session terminated.
The end of my php.ini file located in /usr/local/lib says:
Code:
[Zend]
zend_extention=/home/nathan/ZendDebugger.so
zend_debugger.allow_hosts=127.0.0.1
zend_debugger.expose_remotely=always
[Code]....
View 1 Replies
View Related
Aug 15, 2010
I cannot install Kubuntu (or Unbuntu) 10.4 on my husband's computer. I have spent 5 hours on this and cannot get anywhere. I am deeply frustrated. The iso I burned to CD is good (works on 2 other computers). His computer will not boot from USB, no matter what I do to the drive order in BIOS. After loading the blue screen with the Kubuntu logo on it (and the blue-white dots), the screen changes to black and shows the following text:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) (initrafs) Unable to find a medium containing a live file system.
He really needs to get rid of WinXP. Kubuntu is what I have on my computer (and love it!). Here is some info about his computer:
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
[code]....
View 8 Replies
View Related
Jul 20, 2011
I have configured an instance in AWS EC2. I am trying to set the display back so I can run x apps. I login using ssh -xy -i...
export DISPLAY=XXX.XXX.X.XXX:0.0
echo $DISPLAY to verify
xhost +
xhost: unable to open display "XXX.XXX.X.XXX:0.0"
I have commented out nolisten tcp as suggested HERE I have modified /etc/gdm/custom.conf as suggested HERE Actually, the last suggested modifying /etc/gdm/gdm.conf, but that file didn't exist, so I added the line: DisallowTCP=false to /etc/gdm/custom.conf I rebooted, and still I get: xhost: unable to open display "XXX.XXX.X.XXX:0.0"
View 2 Replies
View Related
Jan 24, 2010
I'm a newbie on Linux and currently in the process of installing it. I'm planning to install the latest version of Apache, MySql, and PHP on the machine with a debugger on it. I haven't decided which debugger is suitable for this environment since I don't have any experience on it.
View 5 Replies
View Related
Mar 13, 2010
I am trying to do a clean install of UBUNTU 9,10 onto a machine that had been running 7.04 successfully for some time. It is a Pentium 2.8GHz processor with geForce 6200 video card.
I boot the system using the install disk, and get past the point where it asks for the language selection. At that time the display shows vertical bars that flash alternating colours. The screen does not recover from this state. I have also attempted to install 9.04 on the same machine, but the same thing happens.
I installed 9.10 on another machine with similar hardware configuration using same disk without problems (without a doubt the best operating system I've ever used!)
View 2 Replies
View Related
Jun 19, 2011
I am completely new to the world of all things linux. I have recently needed to build a linux server to host a Google box, so we decided to use old kit firstly a Dell 1400sc and a Dell poweredge 650. In both cases after the install we got a massage saying that it could not display output the lcd monitor.
I have searched on the web to resolve the issue, and some of the resolutions said to amend the something in the grub. However I have not been able to enter the Grub menu even after trying esc or shift.
View 2 Replies
View Related
Mar 1, 2011
Last week I installed Ubuntu 10.10 on my system in dual booting. I had installed succesfully both but unable to see data files from windows OS. Though I have excercised the options in various resources available on internet/blogs. System takes about 03 hrs during installation process. I am also unable to configure Thunderbird.
System hardware info is as -
System ManufacturerVIA Technologies, Inc.
System ModelKM266APro-835
System TypeX86-based PC
[code]....
View 8 Replies
View Related
Nov 4, 2010
I am writing a device driver and want to debug it using KGDB.Could anyone tell how to install and debug with KGDB on Linux 2.6.35 distribution?
View 2 Replies
View Related
Sep 14, 2010
openSUSE 11.1
KDevelop 3.5.5 using KDE 3.5.10 "release 21.12.1"
gdb 6.8.50.
Problem: When I attempt to debug my program with breakpoints set the debugger does not stop at breakpoint. Message in gdb window is:
/bin/sh -c libtool gdb .../C++/Graphyxs/debug/./src/graphyxs --interpreter=mi2 -quiet
(gdb) set print static-members off
(gdb) Process exited
Attempted fix: Some forum posts suggest KDevelop upgrade. Upgraded from 3.5.4 to 3.5.5; gdb upgrade not available in openSUSE.
Other posts recommend assurance that debugger options are properly set. KDevelop Project Options has Compiler Flags -O0 -g3 with "debug" configuration.
View 1 Replies
View Related
Apr 9, 2011
I'm almost a complete noob when it comes to Linux. All my computers 'til now have been Windows boxes (3.1 on up to XP). I do know a little, I've tried to switch to Linux since RedHat 7.2 but never got this far (I can connect to the Internet!). I currently have two issues I really need to get past this weekend, or I'll be forced to spend $110 on Windows 7 - which I REALLY don't want to do. I can't get the display right, and I can't get the wireless working.
My computer is an AMD Zacate on an ASUS motherboard with integrated graphics (ATI Raedon 6380, if I remember correctly from this afternoon). I'm using an Insignia 1080p TV as my sole monitor. The wireless card is a Zonet ZEW1642S which uses the Ralink RT3062 chipset. Today I finally got the monitor to display in 1920x1080. I updated the ATI drivers (HDMI sound started working after I installed them) and downloaded Catalyst. I've been trying to get through the xrandr instructions to get the screen to fit, as I can't see the top and bottom bars. Also, I think it's displaying in 1080i instead of 1080p. Text quality is atrocious compared to the 1024x768 resolution it had earlier. The screen refresh is terrible.
I opened terminal, inputted "xrandr" and got:
Code:
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 1920 x 1920
DFP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 698mm x 392mm
1920x1080 30.0*+ 30.0
1776x1000 30.0
1680x1050 30.0 30.0
[Code]...
View 9 Replies
View Related
Nov 4, 2010
'I am attempting to grab roughly 40 pieces of data that is a combination of 0 and 1 flags from mysql. based off of the 0 or 1... either pictA or pictB will be displayed. How to evaluate my code? I believe the logic is incorrect.
PHP Code:
$status = 'mysql -u username -ppassword -h x.x.x.x -e 'SELECT help FROM table' database';
declare -A ARRAY
for ((i=1; i=$status; i++));
do
echo ${ARRAY[$(i)]}
done
if [${ARRAY[]} = 1];
then echo "<img src='pictA.gif'>";
else [${ARRAY[]} = 0];
echo "<img src='pictB.gif'>";
fi
View 4 Replies
View Related
Oct 12, 2010
i want to open a txt file and then read line by line and display data with first line and label it 1 and then incremented by 1 for each additional line.
View 14 Replies
View Related
May 10, 2010
Lucid installed without any errors that I can see of off the main i386 installation CD, but after booting I get no display. Even in recovery mode. The monitor doesn't go into sleep mode and I can tell that the OS is actually running the background because I can do a Ctrl-Alt-Del and do a proper shutdown. I'm running an nvidia GT 9500. Everything is working fine on Karmic.
View 4 Replies
View Related
Oct 10, 2010
I have this problem where the 10.10 LiveCD 64-bit works (as in I get full resolution display and no video issues at all). But after install, the OS boots successfully but there's no display. I know it's successful because I was able to login in the dark (sound works).
Here's what I have:
HP m9340f (NVIDIA GeForce 9500M GS with HDMI)
46" Sharp connected via HDMI
Windows 7, works fine.
Here's what I tried with no luck:
1. CTRL-ALT-F1 still doesn't show anything on screen, no terminal
2. Connected via VGA
3. Connected another 17" monitor via VGA, rebooted
4. Added vga=789 in grub before booting
The weird thing is that I had 10.04 before and it was working for a while then it suddenly stopped working. I figured I'd wait until 10.10 but I now have the same issue. I haven't tried 32-bit... I can give that a shot in a bit.
View 5 Replies
View Related
Nov 30, 2010
I did a LiveCD to USB install, following the directions I found at [url] When I went to reboot to the USB stick, all I get is a black Screen (monitor is on and lit, just nothing on the display) No cursor or command prompt. I've tried holding shift to bring up the GRUB menu, changing splash quiet to nomodeset, or just adding nomodeset after the splash quiet thing. I've even tried xforcevesa instead of nomodeset still black screen. Looking at the logs nothing is current as of the last time I tried to boot the computer, it's strictly what was written when I installed it to the stick. Other things I've checked/tried, Pressing CTRL+Alt+F1 at GRUB to get TTY, all I get is that blank screen. I've Checked etc/default/grub to ensure the timeout was higher then 0. The Install CD seems to be OK but I have (as it did another install successfully) but I haven't done any throughal checking of it (there was no check this disk on the first screen of the LiveCD) The USB sticks also seem to be ok (in windows though). Using the disk utility on the live CD I did check the file system on the USB stick, the "/" partition came up clean. Anybody have any other thoughts on this install, any thing else I can check?
View 9 Replies
View Related
Jan 18, 2010
I have created an application that has a executable program that loads in a shared object
the shared object loads in another shared object
both of these shared object I have created
For debugging I have been printf'in data to determine what is going on
I now have some odd memory issue, and need a bit more control over debugging...
I have one workspace set up and under my exectuable(will call maintest from now on) I have two items in my link libraries under project build options being soA and soB (so A is the shared object that maintest uses, soB is the SO that soA uses) I also have linker options pthread and ldl
At the beginning of my maintest I do my dlsym and load in each function that I will be using
I always run my program using maintest, because when I have one of the SO as the startup project(turns bold) and try to run it gives me "You must select a host application to run a library"
I tried to set up this host library, i Go to Menu->Project->SetProgramArguments and change the Host Application to the debug version of my maintest
I then hit OK and try to run again but I get the same error: "You must select a host application to run a library"
If I get this part working - which I need help doing, is tehre other steps that need to be taken to debug the so's? or will this make it so when i hit f8 it will run.
View 1 Replies
View Related
Dec 23, 2008
is anyone familiar with MRTG? i have it up and running just fine, but i have a bunch of interfaces showing up with no data and i want to weed those out. how to specify which interfaces i want to receive and display data from?
View 1 Replies
View Related
Oct 11, 2010
I'm trying to install Ubuntu 10.10 in a desktop computer with three disks. SDA with NTFS in SDA1, where I have Windows XP, SDB where I had Ubuntu 10.04, and SDC where I have an NTFS partition. I want to install Ubuntu 10.10 in SDB without loosing the data in SDA and SDC. When I try to install it, when I choose specify manual partition, I only find this: Where is SDB abd SDC? What do I choose in Device for Boot Loader Installation?
View 2 Replies
View Related
Jun 14, 2010
My two doubts:
(i) In office i open many terminal windows when i start my day and in each terminal i keep on login as different users many times in a day to do some task, by the end of the day when i need to exit from all terminals in a safeway instead of directly closing it i need to execute exit command or CTRL+D many times to close a single terminal safely. Can anybody tell me a way to exit from each terminal in single go, is there any command to acheive this ? I wish if we had a command like exitall like in vi we have :qa command to close multiple files opened in single window. I hope friends you have got what i am asking for ?
(ii) I want a software for debugging shellscripts searched a lot but dint got it.
View 7 Replies
View Related
Apr 3, 2011
I know there's a command to display the live amounts of data being written and read to the disk.Like, it tells you how many blocks have been read/written so far to a device
View 1 Replies
View Related
Dec 26, 2009
Im trying to figure out how to display parts of a .db file created by the scorch2000 server to display a player name, games played, score and maybe more...
here is the text file format example:
playername1 password email #ofgames score setting1 setting2 setting3
playername2 password email #ofgames score setting1 setting2 setting3
playername3 password email #ofgames score setting1 setting2 setting3
playername4 password email #ofgames score setting1 setting2 setting3
playername5 password email #ofgames score setting1 setting2 setting3
I dont want to display everything, of course ^^, but how do i get the player name, the number of games he played and his score to display it in a webpage in this fasion:
Name Games Played Score
joe blow1 25 9876890
joe blow2 31 8989767
joe blow2 26 7989767
joe blow2 17 5989767
joe blow2 13 4989767
and by highest score because the log doesin't put them in in score order....
please help, i asked the maker because he has one runing already but no answer back, well the game is pretty old so i didn't really expect an answer anyways and tryed to figure it out but i dont know functions in php, this is to include in a php-nuke block (this i know how to do
here is an example of a working page at the developper website:url
View 14 Replies
View Related
Mar 12, 2010
I tried in November last year to install 11.2 on a machine with NSRock K8NF6P motherboard which has an onboard GEForce class 6 graphics card. Installation went ok until the very end. Then driver problem surfaced, display went blank and was then damaged and required repair.
The NVIDEA driver install appears to require the system is up and running before it is installed. As I did not get a running system how do I install the drivers before any damage is caused?
View 1 Replies
View Related
