Programming :: Code - Blocks - Shared Object - Debugger ?
Jan 18, 2010
I have created an application that has a executable program that loads in a shared object
the shared object loads in another shared object
both of these shared object I have created
For debugging I have been printf'in data to determine what is going on
I now have some odd memory issue, and need a bit more control over debugging...
I have one workspace set up and under my exectuable(will call maintest from now on) I have two items in my link libraries under project build options being soA and soB (so A is the shared object that maintest uses, soB is the SO that soA uses) I also have linker options pthread and ldl
At the beginning of my maintest I do my dlsym and load in each function that I will be using
I always run my program using maintest, because when I have one of the SO as the startup project(turns bold) and try to run it gives me "You must select a host application to run a library"
I tried to set up this host library, i Go to Menu->Project->SetProgramArguments and change the Host Application to the debug version of my maintest
I then hit OK and try to run again but I get the same error: "You must select a host application to run a library"
If I get this part working - which I need help doing, is tehre other steps that need to be taken to debug the so's? or will this make it so when i hit f8 it will run.
View 1 Replies
ADVERTISEMENT
Oct 20, 2010
What flags do you have to pass to valac to compile code into a shared library (file extension .so)?
View 1 Replies
View Related
Jul 9, 2011
I am writing a C program which is contains Mysql header files and APIs but it can not compile it and its error is : Quote: undefined reference to
to all of Mysql APIs that I included their headers .In command line I compile my source like this with no problem: Quote: gcc test.c -Wall -o test -lz `mysql_config --cflags --include --libs`
I think code block does not have bold italic part of this command. How can I add this to code block to compile my project or those project that contains Mysql APIs (just my project not all of defined projects that has no relation to mysql APIs)with this gcc flags.
View 3 Replies
View Related
Jul 10, 2011
I am writing a C program which is contains Mysql header files and APIs but it can not compile it and its error is :
Quote:
undefined reference to
to all of Mysql APIs that I included their headers .In command line I compile my source like this with no problem:
Quote:
gcc test.c -Wall -o test -lz `mysql_config --cflags --include --libs`
I think code block does not have bold italic part of this command. How can I add this to code block to compile my project or those project that contains Mysql APIs (just my project not all of defined projects that has no relation to mysql APIs)with this gcc flags.
View 2 Replies
View Related
Oct 14, 2010
I've got an error with compiling a program: relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC /usr/lib/python2.5/config/libpython2.5.a: could not read symbols: Bad value collect2: ld a retourn 1 code dtat d'excution make[2]: *** [bindings/_yafqt.so] Erreur 1.
View 1 Replies
View Related
Mar 27, 2010
I wanted to know how can I change the default place of shared object files of a program in a system. let me explain it better for you : I have an embedded computer with Linux OS that its file system is read only and I can not add any file to /usr /lib and ..... and I can just mount a SD memory card to it and copy all of my programs to it and run them from there as you understand I have two choices to choose, first make one big binary file for each program that I am doing it now and it is not a suitable solution and the second is finding the way to change default place of shared object file of my program.
View 1 Replies
View Related
Apr 17, 2011
I want to build an object code for ARM at91rm9200 board from a Makefile using a crosscompiler.
View 4 Replies
View Related
Aug 25, 2010
Our application uses a dynamically loaded shared object library (codec library) to compress and decompress audio streams.
There happens to be several static and global variables in this shared object library. Hence it is not possible to process two interleaved unrelated media streams using this shared object codec library because each stream corrupts/changes the contents of these static/global variables.
Is there a way through which a context save (save contents of data segment of shared object) and a context load (load previously saved contents of data segment of shared object)operation can be performed on the shared object library. This way the context for each media stream can be saved and loaded before and after processing the "other" media stream respectively.
View 3 Replies
View Related
Mar 2, 2010
I have an application consisting of different processes and all these processes are linked to shared libraries. I start the application (spawn all the different processes) as say user1. Now with the application up, if I run a process p1, the process gets activated and works. However, if I start the same process p1 as a different user, say user2, which is completely different from user1 the process complains of
"error while loading shared libraries:...."
I set LD_RUN_PATH both in compile and runtime environment. LD_LIBRARY_PATH is set correctly in both places.
All the above works if I set the absolute path of the required shared libraries in /etc/ld.so.conf file and rebuild the /etc/ld.so.cache
View 1 Replies
View Related
Aug 16, 2010
Alright, just loaded a fresh copy of OpenSuSE 11.3 x64, went to update manager and let it update, came back and computer was shut down. After booting it back up, I cannot update any software, nor run any commands.
Here is my output:
Code: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory I've tried searching for this error, some people came back saying to run this:
Code:
But all that happens is this:
Code:
Nor ls work either so I'm stuck and thinking about a reinstall.
I don't understand how this system could be so messed up after a failed update.. Used to trust SuSE, not sure anymore after this incident..
View 4 Replies
View Related
Nov 9, 2010
Installed Skype but it wont launch. Running the latest Opensuse Gnome. Ive uninstalled it and reinstalled several times but always with the same error. When I try to run it from terminal I get this:
ig@linux-ljqk:~> skype
skype: error while loading shared libraries: libpng12.so.0: cannot open shared object file: No such file or directory
Ive just now uninstalled skype and tried reinstalling it again via yast, but now I get the following error [PK_TMP_DIR|dir:///var/tmp/TmpDir.xftzR0] Repository already exists.
View 9 Replies
View Related
May 5, 2010
just installed Ubuntu 10.04 and installed the flightgear package and the fgfs-base package. I ran fgfs from a terminal and got this error:
Code:
$ fgfs
fgfs: error while loading shared libraries: libOpenThreads.so.12: cannot open shared object file: No such file or directory
$
So then I did:
Code:
sudo apt-get install libopenthreads12
and it gave me these errors:
[Code]...
View 1 Replies
View Related
Aug 3, 2010
I'm trying to run Kega Fusion on my laptop, which can now FINALLY run Linux (ATI drivers finally work on it), and I can't get the emulator to work..
Code:
brandon@brandon-laptop:~/Desktop/Fusion$ ./Fusion
./Fusion: error while loading shared libraries: libGLU.so.1: cannot open shared object file: No such file or directory
brandon@brandon-laptop:~/Desktop/Fusion$ uname -a
Linux brandon-laptop 2.6.32-24-generic #38-Ubuntu SMP Mon Jul 5 09:20:59 UTC 2010 x86_64 GNU/Linux
brandon@brandon-laptop:~/Desktop/Fusion$
Help? I have the ATI proprietary drivers installed. I tried without them and it still wouldn't work. (And OpenGL is seemingly working as Compiz Fusion is running. I also tried with Compiz disabled but the same error pops up).
View 3 Replies
View Related
Aug 21, 2010
I'm running lucid 32-bit. I get this error when I try to run the installer for Unreal Tournament GOTY:
Code:
Verifying archive integrity... All good. Uncompressing Unreal Tournament 436-multilanguage.goty Installer. /home/computer/.setup1548: error while loading shared libraries: libgtk-1.2.so.0: cannot open shared object file: No such file or directory computer@computer-desktop:~/UnrealInstall$ I tried installing libgtk1.2 (as told by some people in other threads), but couldn't do that:
Code:
E: Couldn't find package libgtk1.2
However, I checked that I do have libgtk2.0
So what should I do?
View 2 Replies
View Related
Jan 26, 2011
After finally getting my wireless/graphics drivers working yesterday (thanks to this forum ) I startx to realize that not a single KDE/Qt application will launch, along with Firefox, or Chrome/Chromium. (I did a full install from the DVD, not deselecting anything, and when I upgraded to -current, I also did the same.)
Ark said:
Quote:
ark: error while loading shared libraries: liblzma.so.0: cannot open shared object file: No such file or directory
but I managed to fix that one by commenting out 'aaa_elflibs' in /etc/slackpkg/blacklist (on a recommendation from #slackware), and running slackpkg upgrade-all again, but that's the only one (afaik) that was fixed. Ark still doesn't work, but it doesn't show that error anymore. When I run it, a box pops up that says "Unable to find Ark's KPart component, please check your installation."
Kate still says:
Quote:
kate: error while loading shared libraries: libkemoticons.so.4: cannot open shared object file: No such file or directory
Now, konsole, firefox, and Chromium's errors are a little different.
Konsole:
Quote:
konsole: symbol lookup error: /usr/lib/libphonon.so.4: undefined symbol: _ZN9QMetaType15registerTypedefEPKci
Firefox and Chrome basically say the same thing
Quote:
/usr/lib/firefox-3.6.13/firefox-bin: symbol lookup error: /usr/lib/mozilla/plugins/skypebuttons.so: undefined symbol: _ZN9QListData11detach_growEPii
again, I am completely baffled here, as I had kate, konsole and ark running before I upgraded to -current.
View 5 Replies
View Related
Mar 16, 2010
I want to run blender in Ubuntu910,but get below
test@ubuntu:~$ blender
blender: error while loading shared libraries: libpython2.5.so.1.0: cannot open shared object file: No such file or directory
View 4 Replies
View Related
Aug 6, 2010
I am running after compiling a program and I find that I get the following. How best can I avoid this as i cannot run the program. I have tried removing the offending package, although I cannot find it. I have also tried re-installing. I have also tried changing FC and F90 flags to avoid the MPI version.
error while loading shared libraries: libmpi_f90.so.0: cannot open shared object file: No such file or directory
View 1 Replies
View Related
Apr 13, 2011
I am creating two shared libs that i intend to be dynamically linkable in C and C++, cross platform Linux/Windows/Mac. As a basic sketch, true for both libs, the lib code is in several .c/.cpp and .h files. For now, I'll talk about the part that I am actively working on, a lib named Discover, i.e. libdiscover.so.1.0. First, everything is in a namespace, RemKon_Discover.
The main Discover.cpp defines the methods for the Discover class (declared in Discover.h) and has extern "C' routines that can return pointers to my main c++ object. The call to GetLibraryMainPointer() creates a Discover class object, theMainObject (ok, I win a prize for dumb names) and returns the (non-mangled) pointer to the caller over in my test program. The Discover class itself is declared extern "c" and the tester program #includes "Discover.h".
In the test program, dlopen() correctly opens the lib and dlsym() gets the pointer to theMainObject. However, when I use that pointer in the tester program to access a method (aDiscoverObject->hello(), e.g.) I get compile time errors saying that Discover::hello() in an undefined reference. My makefile is attached.
[Code]....
View 10 Replies
View Related
May 13, 2010
Now that I've entered the realms of permanent beta software I'm completely lost.
I compile a program like this: icc main.c -L. -lxyz -L/usr/X11R6/lib -lX11 -lpthread -lm -std=c99
(But I have no concrete idea about what -L and -l mean. l is short for lib? Why? -L seems to specify the path for some library that follow directly afterwards?). Anyway, it works.
So I get an output file a.out (why a?), which I run by writing ./a.out .
Then I get this error message: error while loading shared libraries: lxyz.so: cannot open shared object file: No such file or directory
I have it in my directory but it won't find it? What's wrong?
View 2 Replies
View Related
May 14, 2010
I upgrade the system from 11.1 to 11.2 seems everything work fine, no error no warning, after a reboot the consol show : mount error while loading shared libraries: libvolume_id.so.1: Cannot open shared object file: No such file or directory. when I try to repair the system the repair tool cannot find the root partion,
View 1 Replies
View Related
Jan 15, 2010
how to install libxcb-xlib.so.0?When I start one software and it complains that
"error while loading shared libraries: libxcb-xlib.so.0: cannot open shared object file: No such file or directory"
I have lastest libxcb1 installed and searched in my system but didnot find a relevant result.
View 3 Replies
View Related
Jan 17, 2010
I installed the latest Gimp beta and it worked fine but then I couldn't open it. I removed it and I reinstalled but it didn't work, so I installed the latest stable version (no beta) and it still does not work, when I open it form Terminal, this is the response:gimp: error while loading shared libraries: libbabl-0.0.so.0: cannot open shared object file: No such file or directory
View 3 Replies
View Related
Feb 11, 2009
I am using Centos 5.2, and I installed all of the available gnome and gnome development libraries available via the "add software" menu item. Still, when running some programs, I get the following error message:
"error while loading shared libraries: libzvt.so.2: cannot open shared object file: No such file or directory"
If I understood it correctly, libzvt.so.2 is part of some gnome libs... where to find and how to install them?
View 5 Replies
View Related
Jan 24, 2010
I'm a newbie on Linux and currently in the process of installing it. I'm planning to install the latest version of Apache, MySql, and PHP on the machine with a debugger on it. I haven't decided which debugger is suitable for this environment since I don't have any experience on it.
View 5 Replies
View Related
Apr 3, 2011
i have installed ubuntu 10.10 marverick, and on it i have installed code: blocks 10.05 and i want to run a program using opencv 2.1.0 in code: blocks.. when i build the program it builds properly without any warning but when i run it it does not show any output....
View 1 Replies
View Related
Jan 24, 2010
I'm using ubuntu 9.10 and I would like to install code::blocks.
Here is what I did so far :
View 14 Replies
View Related
Mar 1, 2010
Only ones I can think of seem overly complex, and I'm sure there is a simple solution I am overlooking. I have a class, it has a member who is an object. This object needs to be able to represent an object of different types.
[code]...
Where "surface" could be several different types, which will be set during execution. Hope this is clear enough. I have tried using templates but am getting "data member cannot be a member template". Either I have incorrect syntax, or am not implementing it right. another solution would have one class containing definitions of all possible shapes, But this would take up extra memory. Other solutions I thought of seem too round-about, and seems there is a simpler solution that I have overlooked.
View 8 Replies
View Related
Jan 25, 2010
so I just installed code blocks after clear installing ubuntu 64 everything went fine but when I try to compile and run my .cpp files code::blocks wont do anything I dont get any messages on the build log so I dont understand whats happening I tried looking on the forums and checking other pages such as the one bellow but no luck at all. [URL]
View 1 Replies
View Related
Nov 30, 2010
I installed Code:Blocks (8.02 from ubuntu software center) and try to run sample program (at first I tried some program related to OpenCV and configure the project for it).
The Build went OK but I cant Run the program. So I tried the simplest progrma of hello World and still I get the same error even on a clean new project.
The Error: "error while loading shared libraries: cv.so can not open shared object file : No such file or directory"
View 1 Replies
View Related
Dec 13, 2010
I'd been using Code::Block IDE for quite a while, but now it won't open. When I try to run it, it says in the panel "Starting Code::Blocks IDE", but no window opens and it disappears from the panel a few seconds later. I've tried reinstalling a few times with no luck.
View 6 Replies
View Related
