Ubuntu Installation :: 9.10 Not Booting *INITRAMFS*?
Mar 17, 2010
I have one hard drive and one operating system on that one drive. No dual boot, no raid, no windows, no usb boot. Just 9.10 installed on one 40 gb drive. After trying the various techniques from this forum, I'm now stuck at Grub loading, error, grub rescue prompt. No menu list to choose from or edit (e).Here is the output of 'sudo fdisk -l'
Code:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 40.0 GB, 40000000000 bytes
[code]....
View 9 Replies
ADVERTISEMENT
Jan 22, 2011
Put together a PC using the following:
Foxconn M61PMP-K AM3 NVIDIA MCP61P Micro ATX AMD Motherboard
AMD Athlon II X2 240 Regor 2.8GHz Socket AM3 65W Dual-Core Processor ADX240OCGQBOX
Patriot 2GB 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model PSD32G13332
HITACHI Deskstar 7K1000.C HDS721010CLA332 (0F10383) 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
Plus an old case and PSU and an old 18gb IDE drive, and an old CD-RW drive
I put the CD in and boot the machine. The initial Ubuntu screen comes up ("Ubuntu" with the line of dots below it) for a few seconds, and then it disappears and I see this text:
(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: Input/output error
Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs
At that point it hangs and will proceed no further. I've tried this with the latest Mythbuntu Live CD and the latest Ubuntu Desktop Edition Live CD. Both were x64 versions.
View 1 Replies
View Related
Jun 4, 2015
Although I'm a linux user, I don't know much about the whole booting process myself. I normally have a friend that I can consult when things don't go the way I expected. But here's the thing: he updated my computer and went away. And of course I can't reach him and I really need it to work. And moreover, I want to be able to sole things myself.
The booting process stops halfway. The last thing it says is: can't access tty: job control turned off (initramfs) ...
View 14 Replies
View Related
May 1, 2009
After installing Ubuntu 8.4 on an old laptop. Double boot w/ XP. I was brought to the terminal with "initramfs". I installed it through the windows partition and assigned it to partition F: which I made sure was reformatted before installation. I tried doing some commands but it seems to bring me nowhere.
View 1 Replies
View Related
Dec 13, 2010
I upgrade to 10.10, and now I can't boot normally. The only way I can get X going is if I boot to the previous kernel's recovery mode and choose failsafeX.
In an attempt to fix this, I ran
Code:
dpkg-reconfigure -phigh -a
However, I get this,
Code:
update-initramfs: Generating /boot/initrd.img-2.6.35-23-generic
stop: Unknown instance:
dpkg-maintscript-helper: error: couldn't identify the package
View 1 Replies
View Related
May 11, 2011
When I upgraded my 64bit System76 machine to Natty, I received an error message that initramfs-tools had failed to be upgraded properly. Nonetheless, when I restarted everything seemed to work as it was supposed to.However, every time I do an update the problem with initramfs-tools recurs. I get the following error message:
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-2.6.38-8-generic
Syntax error at or above line 20 in file '/etc/lilo.conf'
[code].....
View 5 Replies
View Related
May 31, 2010
I'm trying to install ubuntu-10.04-server-i386 in Virtualbox on Windows XP Home (for use as a Drupal development server) using the instructions here [URL]... the Ubuntu server will not start properly. Instead it goes to an initramfs prompt as follows
[code]...
Another thread suggested typing 'exit' after a while but it just repeats the same output. It seems the root disk doesn't exist. I allowed the installer to set up partitions to its own recommendation (Guided?) although I'm not entirely sure what it did - I think there are two partitions but you guys will know that. The host disk is SATA. The CPU is a dualcore but I've only enabled one CPU on the guest within Virtualbox. Also, I had to enable PAE mode as without it Virtualbox crashed every time I started the guest. PAE wasn't mentioned in the instructions mentioned above. I've tried changing the various other disk parameters in Virtualbox (without fully understanding them) but no luck. I also ran run the boot info script from a desktop LiveCD and the results are given below.
[code]...
View 9 Replies
View Related
Aug 6, 2010
did an update from ubuntu 8 to 10.04, this has failed. At boot there is initramfs error with prior message saying.
Code:
alert /dev/disk/by-uuid/-the_uuid does not exist dropping to shell (initramfs) I boot to livecd and check disk uuid and compared it to the fstab and it is correct, is there anywhere else this uuid but have been corrupted or any issue that may cause this issue. note there was power cut during upgrade but this occurred when upgrade should have finished.
View 1 Replies
View Related
Dec 9, 2010
I used to have my ubuntu 10.04 running with a virtualbox for a windows xp. I remove that virtualbox and create another one, bigger, with 10gb. On the process, my computer freezes.. now I'm stuck on that initramfs screen.I really need to recover my linux (I have apache, mysql, samba, all up and running).I can reach "grub" booting with right shift pressed, but I really don't know where I have to begin.
View 3 Replies
View Related
Feb 13, 2010
I have downloaded the latest Ubuntu 9.10 and used 'U904p' a program I had for creating 9.04 live USB I had before. I had 9.04 on the USB pen but thought that 9.10 would be better to install right away rather than upgrading it. So I run through the CLI and make it bootable and all that. I come to put in my pretty old (Spare parts mashed together) Linux box. I get this about 1 minute after the Ubuntu logo and loading bar:
Top of page: WARNING: Couldn't open directory /lib/modules/2.6.31-14-generic: No such file or directory
Then lots of 'FATAL: Could not load /lib/modules/2.6.31-14generic/modules.dep No Such file or directory'
Then I am dumped in to Busybox in initramfs command line. I have been googling and look around the forums all last night and this morning. I find loads of stuff from 9.04 but not 9.10? I tried the old 'Pull USB pen when Ubuntu log shows' and 'Changed SATA settings' turned them off in end, using IDE. Could it be that I created it using the old U904p program. I will look in to the newer one. Seen it about on forums. Otherwise any ideas? I am wanting to build a FOG box for imaging all my PC's and trailing it for work.
View 2 Replies
View Related
Jun 17, 2011
I installed Umbuntu (MythBuntu 11.04 as backend system) and initially when starting it just went to a blank screen (no prompt, nothing). After going through safe mode I was able to get to a prompt and into the UI in low graphic mode.After updating the graphic drivers (nvidea) to the latest and changing some grub options (GRUB_CMDLINE_LINUX_DEFAULT="acpi=off splash") when I restarted it went to the busybox initramfs prompt. I typed "exit" and the UI started up normally.
The next time I restarted it went through to a blank screen. I typed "exit" again and enter and the UI started up normally again (even though I couldn't see what I was typing at the time).While I was going through the recovery mode I do remember some messages about disk not found/mounted, when I googled it I found stuff about entering rootdelay=90 in menu.lst which doesn't exist anymore. Is there a similar option I can enter somewhere in 11.04?Also I'm new to Ubuntu (in fact any Linux distro as an admin), where would I find any log files that may help with finding the problem.
View 2 Replies
View Related
Aug 14, 2010
I have Debian Squeeze with linux-2.6.32-5-amd64Ok, so what I did is first changed fstab ext3 to ext4, rebooted, everything looked good. Then I enabled extents and other ext4 features on my root and home partitions using commands
tune2fs -O extents,uninit_bg,dir_index /dev/sda3
tune2fs -O extents,uninit_bg,dir_index /dev/sda4
then I ran e2fsck -fDC0 /dev/sda3
[code]....
View 6 Replies
View Related
Mar 28, 2011
When I install/run a demo on my Laptop, it works perfectly fine. Though when I go into my desktop, it results in the following error: (initramfs) Unable to find a medium containing a live file system. It's autobooting off the same boot disk, I've md5'd the iso to check if it's correct but no joy.
View 5 Replies
View Related
Nov 1, 2010
I just removed a proprietary (fglrx ) driver which didnt work out well.Now all my updates hanging on: Setting up initramfs-tools (0.98.1ubuntu6) ...update-initramfs: deferring update (trigger activated)Setting up linux-image-2.6.36-020636-generic (2.6.36-020636.201010210905) ...Running depmod.update-initramfs: Generating /boot/initrd.img-2.6.36-020636-genericAnd I dont know how to solve it...besides a clean install.
View 9 Replies
View Related
Nov 2, 2010
So i insert the ubuntu 10.10 in the dvd and boot it. The menu comes up and i choose to install ubuntu. After that it shows some black screens and this error:
(initramfs)mount:mounting/dev/loop0 on//filesystem.squashfs failed: Input/output error cannot mount /dev/loop0(/cdrom/casper/filesystem.squashfs)on//filesystem.squashfs
The disc aint scratched. I tried installing from Windows but i got another error.
And for some odd reason Ic ant make a removable startup disk:
View 2 Replies
View Related
Jul 12, 2011
I have 2 Dell Inspirons 2200, I've installed F14 on in the past. Both laptops fail to initialize, I've verified media, and I'm able to boot the DVD on another system. The install fails at: Trying to unpack rootfs image as initramfs...
View 3 Replies
View Related
Jan 13, 2010
I am trying to install Ubuntu on a nvidia board which, based on the forums I have perused, is a FAKERaid chipset. Originally I tried to install according to https://help.ubuntu.com/community/FakeRaidHowto to no avail. I gave up and am resorting to breaking down my raid setup (thus losing my Windows XP installation) and using Linux's software raid (which seems to be the recommended method) with the Alternate CD install.
I went in to the bios and completely disabled my board's RAID function. I then followed the instructions here: https://help.ubuntu.com/community/In...n/SoftwareRAID , except it popped up with a window advising me "one or more serial ATA RAID configurations have been found. Do you wish to activate these RAID devices?" which that page didn't mention. I believe I selected "Yes". Setting up the partitions I made (from beginning of disk to end of disk) a RAID1 200MB /boot partition, a RAID0 / partition (90GB?), free space not set up in RAID (approx 20GB for each SATA drive to later install Windows on [if that's even possible]) & then the SWAP partition 2GB at the end of one of the disks (is it OK that this one wasn't in RAID?).
The installation completed, as far as I can tell, without a hitch. Except also of note: my network card doesn't work in the installer (gives an error message about unable to configure dhcp) so i'm not connected to the internet. Then I restart and the following appears: grub loading: error: biosdisk read error. Followed by what appears to be the Ubuntu loading splash (just a small white shape in the middle of the screen), and then:
[Code]....
View 9 Replies
View Related
Jun 24, 2010
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
View 9 Replies
View Related
May 28, 2010
I'm trying to compile and install new kernel 2.6.32.14 in my ubuntu karmic. After compiling source and executing the deb package for the kernel, I tried to run update-initramfs but got "No space on device" error. My /boot partition size is 100 MB and is currently having 37MB free. After I run the update-initramfs command I noticed that space in /boot got depleted and soon came to naught which led to no space error thrown by gzip. I believe the resultant gzipped archive is no more than 20MB...then why is the whole 37MB is being used up? Please correct me If I'm wrong here otherwise I might be left with no choice but to increase the size of /boot partition. Is there anyway I can make update-initramfs to use the temporary space from other drives(may be /tmp) when creating gzipped archive?
View 1 Replies
View Related
Aug 28, 2010
I am using Ubuntu 9.10 and am facing an issue while booting up. It goes into initfs command prompt on one of the 4 kernels that show up in the boot menu. I tried to look around for a likely solution and hence did the following:1. ran "chkdsk c: /f" in my windows partition.2. Added "rootdelay=90" in "/boot/grub/menu.lst" file.This is how my /boot/grub/menu.lst file looks and the problem is with the kernel 2.6.31-20-generic:
title Ubuntu 9.10, kernel 2.6.31-20-generic
uuid ceacd229-2b68-41bf-a967-8ee470085fd8
kernel /boot/vmlinuz-2.6.31-20-generic root=UUID=ceacd229-2b68-41bf-a967-8ee470085fd8 ro quiet
[code]....
View 9 Replies
View Related
Jun 20, 2010
I am trying to learn how to modify the initramfs in a way which is so Ubuntu-friendly as possible. I do not just want to unpack it, change it and re-pack it, as my changes won't be kept when I upgrade my kernel next time.
What I want to do is: Add curl to the binaries available in the initramfs Add a script which is run after networking is set up which calls curl In case there is no "after networking" I have to setup networking myself using DHCP. There is a tiny client inside BusyBox if I am not mistaken. I have googled a lot to get this information. As well as looked trough more than a few books.
View 2 Replies
View Related
Oct 26, 2010
After copying a filesystem to be used as an image on a PXE server, is it possible to update that image's initramfs on the PXE server?
On PXE server, I added several ethernet modules/drivers to the following file:
/nfsroot/etc/initramfs-tools/modules
Before the changes will take effect, I need to run:
Code:
$ sudo update-initramfs -u
View 1 Replies
View Related
Jan 24, 2011
I'm finding myself in a situation where I am locked out of my machine (because of a initramfs that doesn't allow me to log in). I think I know where the problem is, but I do not know how to go about rebuilding an initrd file from another machine (especially since my second machine is running on a lower kernel version).
I have tried booting from a LiveCD, but that does not allow me to make any changes to /etc/update-initramfs/. Currently do not have a USB drive handy. How would one go about this?
View 2 Replies
View Related
Mar 17, 2011
Can i add a c program file to initramfs such that it runs when kernel loads and before root file system getting busy...
View 3 Replies
View Related
Aug 6, 2011
I am having trouble accessing my computer after abruptly shutting it down because it was booting off of a live CD and I just wanted it to boot of the HDD. When I try to boot up from the normal HDD I used to get a lot of errors about /dev/sda being not found, and then it went to an (initramfs) prompt, from which I could do pretty much nothing. I booted into a live CD, and basically I didn't need any of my data so I wanted to just get rid of the problem partition and reinstall. I attempted to delete the partition, but that didn't work, saying something about /dev/sda being busy (even though I had booted from a live CD and had not mounted the partition).
Anyhow, now when I try to boot from the HDD I get:
"Error: no such partition. grub rescue>"
Basically what I'm trying to do is just get rid of this partition and reinstall, but I keep getting errors about it being busy and not being able to delete the partition. Is there someone with a way to allow me to just blast this partition and reinstall? I've got a windows 7 partition on the same HDD and I'd really like to leave that one alone, but the ext4 and swap partition can just go.
View 4 Replies
View Related
Jun 21, 2010
I'm working on a custom Ubuntu 10.04 live cd, and I've found updating the Plymouth splash uses up a lot more disk space. The culprit seems to be the command update-initramfs -u, which is needed to apply the new splash image. I'm guessing it's making a new intrd image or something.
View 3 Replies
View Related
May 1, 2011
I have been using 11.04 for about a day, I go to boot up and it goes into busybox initramfs instead of booting into Ubuntu. The options to my boot in grub, and the errors I get when booting into initramfs are in the pictures attached to this post.
View 2 Replies
View Related
May 22, 2011
I either installed Hardy heron or its predecessor by accident, but began running it exclusively. I did it way back when while trying to create a test drive disk, and I did not repartition the drive, because all my windoze NT stuff survived. I'm now 8.04. Yesterday I had a bunch of updates to do, did them, closed a ton of windows and then pulled up 3 open office files and each, when it came up said there wasn't enough space to save all needed information as they opened. I then closed them and one hung and froze the whole machine, leading me to do a reset. This is BEFORE rebooting from the updates.
Now when I boot into Ubuntu (I'm dual boot) I start to get the opening Ubuntu GUI screen but then get :
BusyBox V1.1.3 (Debian 1.1.1.3-5ubuntu12)built in shell (ash) line followed by:
initramfs)
I'm essentially a total noob, I've rarely used command line and not for a long time. I made a version 11.04 live disk, and it says that the file system is clean, but will not show me any of my old files, only the NT files and directories. I have a ton of unbacked up important data in Hardy Heron so I don't want to do an install from the 11.04 CD.
I've read several threads so far, and can't seem to find anything addressing this that I understand. The drive is a 160GB drive on an HP Pavilion dual core that has a 154GB NTFS boot partition, which is where I'm sure the Hardy Heron files are, and a 6GB FAT32 HP_RECOVERY partition that windoze lists ad drive D (the NTFS is C) The live disk says the FAT32 partition is /dev/sda1 and the NTFS is /dev/sda2
Where should I start? I've seen stuff about booting into recovery mode, but that isn't an option when I boot from the hard drive, and the only older ubuntu disk I have is for 7.something and generates "defective CD" type error messages.
View 7 Replies
View Related
Aug 21, 2010
I keep getting this error message when installing anything using the terminal or synaptic manager in ubuntu 10. I was installing pidgin when this message happened. The funny thing is pidgin did get installed and works fine. I am booting from a USB stick. I am using the perdition version which saves any changes i make to ubuntu on the USB stick.E: initramfs-tools: subprocess installed post-installation script returned error exit status 1E: bcmwl-kernel-source: subprocess installed post-installation script returned error exit status 1
View 4 Replies
View Related
Feb 1, 2011
When booting I am being dropped to initramfs/busy box heres the error: Gave up waiting for root device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/mapper/dev-root does not exist. Dropping to a shell!
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu7) built-in shell (ash)
View 1 Replies
View Related
