host hibernates while virtual machines are running on it.
In my case, my Ubuntu 10.04 host hibernates nicely, but when it resumes, virtual machines are reset and their state is lost.
Similar problems reported here: [URL]
I'm still having the problem described in this thread (F15 + VirtualBox + USB Extension doesn't work). Does anyone else have this problem, or solutions to it?
http://forums.fedoraforum.org/showthread.php?t=263400
I have a working Windows XP VM hosted by Fedora 15, except for the USB support. code...
I'm preparing a vitualization server (host) with VirtualBox. This machine, running Debian, is intended to run in HeadLess mode, without GUI.
I've got some guests VMs running. But I was wondering about the best way to start this guests VMs on startup and shut them down kindly when host is shutdwon.
Virtual Machines run under non-root user. I was thinking about making a script in /etc/init.d/ in order to start certain VMs and to stop every VM running when system is halted. Is this really the simplest and most secure approach?
Actually I couldn't find very much on this subject in user manual or googlin' around.
We got a new server with 2 network interface cards with 4 MAC addresses in total. We would like to run two virtual machines (vserver1 and vserver2); one should connect via eth1, the other via eth2, and the host (mainserver) via eth0. The content of /etc/network/interfaces is as follows:
[Code]....
A connection from mainserver to vserver1 or vserver2 is not possible; a ssh connection from mainserver to vserverx ends with a login to mainserver.
After updating to kernel-2.6.33.6-147.fc13.x86_64 (and updating all kmods) VirtualBox guests no longer boot.
I had a Windows guest (from now on refereed as Crapdows) that worked normally. After the update, I could get to the "Start Windows Normally" screen, but then Crapdows refused to boot. At first, I thought it was a crappy M$ bug, but after creating another VM (Doublecrap), and starting from scratch, I was able to get to the "Windows is loading files" screen, and then the guest hangs again.
This problem is generalized to all OS'es I've tried. In Ubuntu, I can get to the language selection screen before the installation freezes. The same applies for Fedora and SUSE guests.
Is it time to get my hammer?
I posted this over in the VirtualBox forums but was directed to the debian forums as it was the debian fork.VBoxManage and all virtualbox GUI elements are black with white text ("night mode" in other apps) with no borders or other useful Gui bits. Apparently the board image quota is reached (?) but you can see it here: URL...All the guests work, it's just this GUI issue.
Code: Select allii virtualbox 4.3.30-dfsg-1+deb8u1 amd64 x86 virtualization solution - base binaries
rc virtualbox-4.3 4.3.30-101610~Debian~wheezy amd64 Oracle VM VirtualBox
ii virtualbox-dkms 4.3.30-dfsg-1+deb8u1 all x86 virtualization solution - kernel module sources for dkms
ii virtualbox-qt 4.3.30-dfsg-1+deb8u1 amd64 x86 virtualization solution - Qt based user interface
vbox-install log on other board,I upgraded from Debian 7 stable to Debian 8 stable. I haven't used virtualbox in a long time, so maybe I somehow did this myself, but I'm not sure where that is if I did.
I couldn't find anything else in /var/log that would be useful. It's across all users. I checked the launch scripts /usr/bin/virtualbox, /usr/bin/ vbox manage, and /var/lib/virtualbox/*
I just installed (n this 11.2 system) vmware server (v 2.02), to have access to a few small systems. One of them is a 11.1 guest which I just upgraded to 11.3, successfully (almost).
I have a problem, though: from the host I can not ping/ssh the guest.
Guest to host works fine (including names).
Code:
The firewall is down on both sides. I don't see anything with iptraf in the guest. The IP addres of the guest is correct, unless I'm too tired to see.
Why?
Code:
I had Windows XP running fine on Virtualbox, but it's started crashing. This happens instantly when I try to startup the virtual machine. It doesn't get anywhere near booting up. Total crash, no ctrl-alt-del on host. I've tried reducing the RAM and number of processors but it doesn't help. I hadn't changed anything when the problem started.
Virtualbox Version 4.0.12
NAT network
Host kernel Linux 2.6.35-30-generic-pae(i686), distro Ubuntu 10.10
I have made a fresh install of Ubuntu 10.10 and installed Virtualbox from the repository Virtualbox runs ok.
BUT when i enable the nvidia drivers to support my dualscreen setup the xserver crahses with the start of virtualbox and i found out also qemu
this i found in the X log
[ 11360.774]
Backtrace:
[ 11360.774] 0: /usr/bin/X (xorg_backtrace+0x2 [0x4a0fa8]
[ 11360.775] 1: /usr/bin/X (0x400000+0x60fcd) [0x460fcd]
[ 11360.775] 2: /lib/libpthread.so.0 (0x7f0ccf3f0000+0xfb40) [0x7f0ccf3ffb40]
[ 11360.775] 3: /usr/bin/X (0x400000+0xbb22f) [0x4bb22f]
[Code].....
I used to have my ubuntu 10.04 running with a virtualbox for a windows xp. I remove that virtualbox and create another one, bigger, with 10gb. On the process, my computer freezes.. now I'm stuck on that initramfs screen.I really need to recover my linux (I have apache, mysql, samba, all up and running).I can reach "grub" booting with right shift pressed, but I really don't know where I have to begin.
View 3 Replies View RelatedQuote:
I'm working in php / mssql project and I'm working on php side. I try VirtualBox to access to mssql from linux. I'm using VirtualBox 3.2.8(Downloaded from VirtualBox website) Hosted On Ubuntu 10.04, and my Guest OS is Windows 7. I followed some tutorials on how to connect from host to guest, but all failed... how to connect from ubuntu (host) to windows 7 (guest)
I recently tried using iTunes inside a virtual box with Windows 7 to update my iPhone 3GS which involved handing control of this device to the guest OS.My question is whether it's possible to give that control back to my host system (Lucid).I've tried removing USB support from the virtual box device dropdown but that didn't work.Any thoughts? If all else fails I could likely restore using someone else's computer but I'd prefer not to.
View 7 Replies View RelatedI just installed 11.04 32 bit (downloaded today) in Virtualbox (4.0.6), with host 64 bit Win7. I'm trying to get Unity working. I've searched and found references to the fact that the Host graphics card must support 3D, which I believe mine does (nVidia GeForce 7900 GTX). Also found some references to try the following:
After the OS install, I did this:
sudo apt-get update
sudo apt-get install virtualbox-ose-guest-utils
Then rebooted and did this:
killall -9 gnome-settings-daemon && gnome-settings-daemon
I also installed the latest Guest Additions. In the VM settings I have the "3D" tick checked, and have 32M RAM allocated to video. But no Unity shows up, just normal desktop.
Any ideas?
Why does Ubuntu still have such a hard time hibernating? I've been running it since 7.04 and never have I had a system that consistently hibernates correctly. With 9.10 it starts to, does the big CPU use to store stuff, then all the sudden it just turns back on....
View 4 Replies View RelatedOn a Xp host I installed last version of VirtualBox and I created a 9.10 Ubuntu 'guest'.While I can surf the net, I cant 'sudo apt-get update' nor do a 'reload' from 'Synaptic Package Manager'.
PS Here are some facts:
<<
Host:
PC:
Thinkcenter 9640-7BG
Network adapters:
[Code]...
im new to virtualbox and i run linux arch as guest os. now my question is how it can be that the vm has the same ip as my host os.
this is suppose to be diffrent machine isnt it? and how to configure my guest vm to be completely unrelated to my host
A family member has got a windows PC (with a Pentium 4 w/o hardware virtualization support) that keeps winding up infected and crudding up. As I would like to minimize family IT support time, I figured the easiest thing to do was to wipe it, put Linux on it, install XP pro (they don't want a more recent one) in a VirtualBox virtual machine, and take a snapshot. I'd set up a shared drive on the host where they could store all their stuff, so that when it inevitably gets hosed, all I have to do is roll back to the snapshot.
This leaves me with the question - which host distro would be the best choice? I'm looking for three things - ease of maintenance on my part (updates, configuration, etc.; I have a background in slackware, but have some exposure to Ubuntu), minimalism (so that the bulk of the system's resources can be devoted to the VM), and virtualization-readiness (say, so I can have the computer automatically go from power up to virtual machine power up, thereby minimizing the user exposure to the host).
Obviously, I would like it if it has all of the standard tools that will allow me to do remote maintenance, also.
I've looked at Ubuntu server JeOS, and it seems enticing, but I can't seem to find out whether it can be used on a desktop system, i.e., with a GUI, etc.
Recently I've been unable to load web pages, hosted on my Ubuntu Guest in Apache, from my OSX Host. In fact, I can no longer even ping the Guest OS from the Host. In the past, when I did ifconfig on the Guest, I got an IP of 10.0.1.n. Now I'm getting 10.0.2.15--the default NAT Address. The thing is, I didn't change any settings recently. What I did do is run software update for OSX, Ubuntu, and updated VirtBox.
Current Versions:
VirtBox 4.0.8 r71778
Host: OSX 10.6.7
Guest: Ubuntu 11.04
why I can no longer access my Guest OS from my Host? I spent hours on this last night, to no avail. What would cause the Guest IP to change from 10.0.1.n to 10.0.2.15? As I say, I manually made no config changes.
I have VirtualBox v3.1.0 r55467 running on f12 2.6.31.6-162.fc12.i686. The guest is Windows XP SP3. I need to enable bridged mode for the virtual network interface on the guest. Everytime I enable bridge mode the following error occurs.
Quote:
Failed to start the virtual machine Windows XP. Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND). One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND). When I run '/etc/init.d/vboxdrv setup' i get the following compilation error:
Quote:
Stopping VirtualBox kernel module [ OK ]
Removing old VirtualBox netadp kernel module [ OK ]
Removing old VirtualBox netflt kernel module [ OK ]
[code]....
dmesg gives me nothing. I have scoured the web .. and even asked on #vbox and #fedora cant get.
I have tried a few times already the following procedures: start a new installation (each time, I create a new VBox VM) with the Fedora 12 DVD iso attached to the DVD drive of the VM. I select the default setting, like US english, US keyboard, local time (GMT +8), standard installation ... etc). The installation process had been smooth to the screen the system asking for a reboot after installing something like 1100+ packages. Then I click the reboot button offered. The VM restarted but each and every time, it came up with the following error message:
Booting from local disk...
FATAL: INT18: BOOT FAILURE
There was no other error message durint the installation process. It would be very much appreciated if some one can tell me what went wrong and how to solve it. I believe even I try again the same way, it will end up with same result. Is it a software or hardware problem? In case software problem, is it Fedora or VirtualBox?
I am trying to config linux box as router.
I have CentOS 5.5 client and host in VBox. I can't connect them (I am using bridge adapter mode) as I don't have router in between.
I just created DHCPD on host, and followed
[URL]
But that don't seem to work also. Host is 192.168.1.10 and client is 192.168.1.100 but when I ping host from client, it says Destination host unreachable.
pretty comfortable at the command line and in kde. found 2 'supplementary kernel drivers' for virtualbox at slackbuild (thank you heinz!). followed the how-to at slackbuild and built and installed both packages, but additions weren't working. (i thought they were standalone) noticed the 'supplemental' in their description, and so installed the guest additions for linux from vbox site. additions still not working. at this point i start restarting my slackware vm, and redoing everything in various sequences. finally, additions work! but i'm not sure why! critical pieces and sequence for getting guest additions working once i have slackware installed?
View 1 Replies View RelatedSetup:
1. Microsoft Windows 7 64-bit Professional HOST Operating System
2. Oracle VirtualBox 4.0.6r71416 on top of Windows 7
3. Ubuntu 10.04 Lucid Lynx 32-bit GUEST Operating System in VirtualBox
I successfully installed the above configuration on May 15, 2011. I had some difficulty getting the Host-Only VirtualBox Adapter to work. I was forced to make a subtle change to the Windows Registry in order to get the Adapter to work correctly. I was successful. I used the Debian Update Manager to update my installation of Ubuntu. Nothing changed on the Windows 7 side. Now, Windows 7 says that the Host-only adapter is enabled, but I don't have a connection to the Ubuntu OS. I can't use PuTTY or WinSCP. When I invoke ipconfig on the Windows side, 192.168.56.101 is the IPv4 address. When I invoke ifconfig on the Ubuntu side, there isn't anything.
I have a requirment where I have to store some data before the system goes to hibernate.
How the kernel intimates to the application when it goes to hibernate. Is there any event or a signal that kernel posts to all applications?
I used to be able to access the web server I had running on my guest OS in Virtual Box from my host OS. I also had it set to the network settings of "Host Only Adapter". Then I needed to access the internet directly on the gues OS, so I changed my settings on the guest OS to "NAT" (in virtual box), and in /etc/network/interfaces, I removed the loopback stuff and the static IP I'd put in. Now no matter what I do, I cannot get it back to being accessible from the host os! I even did a completely NEW install of Ubuntu guest OS in Virtual box Guest OS: Ubuntu 10.04 Desktop Host OS: OpenSUSE 11.3 VirtualBox: 3.2.6
View 5 Replies View RelatedWith VirtualBox you can share a directory on the host machine with the guest machine. Can you share a directory on the guest machine with the host machine? In my setup the host is Windows 7 and the guest is Ubuntu. Can I have a directory on the Ubuntu file system accesible from Windows?
View 1 Replies View RelatedOur company uses a customized vpnc (based on and almost the same as vpnc 0.5.3). I first tested it on a Windows host under Virtualbox everything works straight away. But when I want to use it on a Linux host directly it always ends in "No response from target". I have tested this on Fedora 12 and the latest Ubuntu.
I thought of firewall settings but iptables -L on Ubuntu returns an empty list even.
I have set up my guest OS in VirtualBox so that it has a static ip and is using a bridged adapter. As a result, I can see the webserver that's hosted in guest from my host OS's web browser. However, for some reason my current setup does not allow my guest to reach the internet. What settings do I need to enable both?
View 1 Replies View RelatedWhat is the best way to share files in virtualbox between host/machine I thought of trying usb but the devices are all greyed out. I know the fix for this but I have to search for it, permission problem I think? Or is there a more elegant way
View 4 Replies View RelatedI have a Win7 laptop with the latest version of VirtualBox installed. It's a dual core proc with ram to spare. So, I installed Slack64-13.1 and it rocks! I'm really impressed that Slack is running at what appears to be native speed, but in virtual machine. Hardware response is normal, WIFI and LAN are both working great for my normal tasks.So, I downloaded a few much needed patches, and new ISO image for one of my old desktop PCs. Now, my problem is I can't connect my USB cdwriter to my virtual slackware or share folders in the Win7 install with the virtual slackware. I read a few of tutorials on the Oracle VBox website, and several of the ones here on LQ, and none of them seem to solve my problems.
View 3 Replies View Related