I have acer aspire one netbook i'm using ubuntu 10.04 on my desktop but i wan't to install ubuntu on the netbook. i made usb installer ubuntu will run from the usb drive but when i try to install it gets stuck on step 3 of 7. wth? tried over and over again
View 2 RepliesI have installed opensuse 11.3 a couple of weeks ago in 2 computers and both suffer of the same problem.In my asus laptop, i have a german keyboard. It is correctly recogniced as german keyboard by ev-dev, i guess. (ev-dev managed). But i need to write some spanisch symbols too, like accents (á © í ³ ? ñ¬ ·hich in a normal linux, they do work. For some reason, after rebooting, or after some time of having it running, the keyboard layout resets to an invalid setup, here accents get not over the letter (?a ?e ?i ?o ?u), so i have to select my layout again in the gnome control center.
With my other computermore or less the same.Its a desktop PC with an spanisch keyboard. But i thinck i picked German keyboard during installation and now it starts always with german with some sort of 5 secs delay when setting it. I have to pick spanisch and i always delete the german layout, but after some time having it running, it resets to the previusly deleted german layout.
I'm trying to install Ubuntu 10.24 at a computer running Windows 7. Here are 2 scenearios, with the same result:
If I boot from the Ubuntu CD and try to install it, the wizard is freezed at the keyboard layout selection. I'm able to select my keyboard, but after I press Forward, the button is greyed out and nothing happens.
If I press cancel, I load the Live CD and retry the installation from there, selecting the shortcut "Install Ubuntu 10,04 LTS" from the desktop. Everything goes fine until the keyboard layout selection. Just in case, my keyboard is a USB Microsoft Natural Ergonomic Keyboard 4000 and it works perfectly fine in Windows 7 and in the Live CD.
I am trying to install ubuntu 9.10 to Dell Inspiron 14". It got stuck after first step. Configuration of my laptop is as follow intel core i3 processor, 4GB DDR3 RAMm (does it support for above config.?) i am having windows 7 ultimate as an operating System right now and i am new at ubuntu
View 3 Replies View RelatedHP Pavillion m9340f.
View 2 Replies View RelatedI get stuck on the screen right after language select where it tells me to plug in, connect to the internet, and have 2.5 gigs of mem for best results. Once I click the forward button on this page I get stuck.. I have let my laptop sit for hours, multiple times to see if I needed to wait and after waking up today to see that it was still loading I knew there must have been some sort of problem.I have installed Ubuntu twice before, w/ the same flash drive and the iso from the same computer. But now for some reason it will not work
View 2 Replies View Relatedi trying to recreate(after zero-superblock) raid 10 but get stuck with near=1, far=2 layout, how i can setup this layout using mdadm.
View 2 Replies View RelatedRunning Ubuntu Lucid Lynx, GNOME 2.3Keyboard Preferences utilityAdding any Spanish language keyboard layout makes my Alt_R not work in ANY layout! I see that it changes Alt_R to "Iso_L..." for all/both layouts, including USA layout. When I click "Reset to Defaults" it's fine again, USA layout shows Alt_R again. I've tried all the variants of the Latin American layout and the Spain layout and they all do the same thing.What is "ISO_L..." and what's going on?i DESPERATELY need my Alt_R to work!
View 2 Replies View Relatedhaving problems with my keyboard layout since upgrade from F11 to F12. When I reboot and login into gnome I have to switch back to my layout as it has been set to USA default layout.
View 3 Replies View RelatedI was wondering if anyone could provide resources on creating and installing keyboard layouts from scratch. I am a conlanger(I create languages), and I need to be able to map certain unicode characters to certain keys. I could do this via creating a font, however, It would be easier if I could just switch between layouts which is easier than switching between fonts. Especially, when I am using more than one program at once. I'm sorry because I have never used the Ubuntu forums before and I probably posted this in the wrong forum.
View 1 Replies View RelatedI have a UK keyboard, so I selected the United Kingdom layout on installation of OpenSUSE 11.3.However, something keeps automatically adding the USA layout, and switching to it ! How can I prevent this annoying and intrusive behaviour ? Deleting the USA layout is not enough, it seems. It just restores it again.
View 2 Replies View RelatedI have tried to install Ubuntu Lucid Lynx on my Aspire One netbook. I tried both the full version and the netbook remix and both installations stall at the keyboard layout stage. I select the layout and click forward but it stalls and doesn't go any further. Anyone else have this problem on any of their machines or do you think it could just be specific to the Aspire One? I just find it odd that it happened on both versions. They work fine in live mode so I don't know what could be causing this.
View 8 Replies View RelatedIf I switch using CTRL-ALT-F1 to the console, then I have other keyboard layout than under Gnome Desktop. Howto change console keyboard layout?
View 5 Replies View RelatedThe thing is that whenever I try to install Ubuntu (Xubuntu actually, but the problem seems to happen with any desktop environment) I fill the spaces, choose the partition where to install, set the mount points and everything, but when I get to choose the keyboard layout the installation freezes, it just stays there and it won't give me the chance to submit a username and a password for my Linux session.
View 4 Replies View Relatedstep by step procedure of how to install Free Adobe Flex SDK in Ubuntu 10.04.
View 1 Replies View RelatedI'm an absolute beginner trying to sue Linux. I just installed Ubuntu Linux Netbook Remix 10.04 LTS and everything's fine. I just wanted to have Java in my Ubuntu. I downloaded JDK from Sun website. There are 2 files
jdk-6u21-linux-i586.bin
jdk-6u21-linux-i586-rpm.bin
I searched the web for instructions on how to install but I just get confused. Can anyone provide me with step-by-step installation including registering environment variable ?
I was using a custom layout for my keyboard as I've a UK laptop but still use french accents sometimes. After the update from Wheezy to Jessie my configs disappeared so I have put them back:
- Defining my layout here: /usr/share/X11/xkb/symbols/gb
- Adding here: /usr/share/X11/xkb/rules/base.xml and here /usr/share/X11/xkb/rules/evdev.xml in the gb configItem
Code: Select all    <variant>
     <configItem>
      <name>accentsFR</name>
      <description>English (UK with french accents)</description>
     </configItem>
    </variant>
- Adding the declaration of the layout here /usr/share/X11/xkb/rules/base.lst and here /usr/share/X11/xkb/rules/evdev.lst
Code: Select all accentsFR    gb: English (UK with french accents)
So everything looks alright, if I go to System Tools -> Preferences -> Settings -> Keyboard -> Input Source my layout is well selected and I can even see the correct layout by clicking on the keyboard icon (cf my snapshot)
Here is the snapshot of the keyboard input source settings: [URL]....
I updated from 11.1 to 11.2. Before some intelligent person says, I should never update but do a new install: a new install isn't better, then I have other problems to tackle. And I really would like updates to work.Well, I have the following problems and I hope you don't mind me listing them all in one post *it's difficult for me to type on this keyboard layout):1. home isn't found or set up. I have modified fstab to mount /dev/sda6, which is home, but it won't mount it at startup, and also not when it's just using the disk/by-id line that had been put in.
2. the keyboard layout is american, while the system language is set to German (I'm German and would like also my keyboard to know that). I had no chance to change that, even a loadkeys de-latin1 doesn't help3. OpenOffice drives me crazy. It just doesn't start properly, or at all. It doesn't open a number of documents, but it doesn't also give any error message. Sometimes soffice.bin is in the list of processes, but OOo is nowhere seen. After killing the process (or terminating it), I can start it, but have only the opening screen and cannot really open a document.4. printing doesn't seem to work, either.Needless to say that everything worked fine before the update
I have a keyboard layout built in Korean language, and when i installed openSUSE 11.3 by network installation i keep keyboard layout to Korean. But after installation can't write Korean but still see Korean font in Firefox, cuz i added its font on firefox configuration settings. What shall i do? I want installed in English but still need to use Korean fonts to write something.
View 2 Replies View RelatedMy son's desktop has Fedora 12 and a wireless card. Everything worked for a long time until one fine day the network management just disappeared from both System/Preferences menu and the panel on top.I can run a Live CD with Fedora 12 on that machine and it immediately connects to our home wireless network. Booting from hard drive has no sign of NM. Trying to run 'yum install NetworkManager-gnome' does nothing because there is no connection. Running the same command as a LiveUser from CD does seem to install everything (but where to???), no errors reported, and still the is no network functionality upon reboot from the hard drive, even when plugging to LAN with a cable.It seems that I need NetworkManager in order to go online in order to install NetworkManager.I have other computers at home that work fine, I was able to download a couple of archives with NM, but I am new to Linux and have no idea what to do with those files.I could not find any step-by-step installation guides for NM, especially when the computer has no connection at all.
View 8 Replies View Relatedi've just built my own debian distro with simple-cdd, based on the latest release of lenny. everything is working fine, except for:
first, i couldn't set a default keyboard layout up in preseed file. i tried all these settings below, but none of them worked:
console-data console-data/keymap/qwerty/layout select US american
console-data console-data/keymap/family select qwerty
console-common console-data/keymap/family select qwerty
[Code].....
I used to have F9 on my HP pavilion dv8000. I have been trying to install F10 (and even CentOS 5.3) on it and, during the installation process, when I choose the keyboard layout (english) it doesn't go on. Weird because I am using the same disk I successfully used to install F10 on my desktop. What could it be? The same problem happens when I make the installation process in text mode...
View 1 Replies View RelatedI defined a variant to my keyboard layout (Italian) editing the file/usr/share/X11/xkb/symbols/it and adding this block:
Code:
partial alphanumeric_keys
xkb_symbols "itaro" {
[code]....
i had problem on installing my nvidia gforce 8600m gt driver on fc12,now i have installed fc13,could any one show me a step by step way to install the driver?i don't want to confront with that black screen one more time,as i understand if we download the driver from the nvidia website there would be a relationship between the kernel version and the driver,if so what is it?how should we understand which driver is for which kernel?my kernel is,2.6.33.3-85.fc13.i686.PAE[with 2 gb ram]which way is better?to get driver via repos and yum or the nvidia website?
View 6 Replies View RelatedI am trying to install Ubuntu 10.04 from a USB drive but every time I reach the option for changing the keyboard layout and press forward, it seems to get stuck. That is, the mouse icon shows that it is loading but nothing ever happening. I even went for a shower, came back and nothing.
View 1 Replies View RelatedI have problems with keyboard layout switcher. On Gnome everything works. But when I start to use other DE I can't switch keyboard layout by default. So I create xorg.conf, but anyway it doesn't work...
View 1 Replies View RelatedI'm a used Ubuntu user on a pc, and I like the french keyboard layout because it allows me to type accentued characters easily.I found a win-fr keyboard layout but it's much like windows and not so good.I found xmodmap.fr keyboard layout and I'd like to know if it was possible use it with my Mac SL 10.6.5, maybe I could do xmodmap xmodmap.fr or a way to convert to mac layout file.
View 1 Replies View RelatedRecently i have bought a Dell Inspiron n5010 laptop and installed ubuntu 10.10. I have a windows 7 installed as well. In windows Us English Table for IBM Arabic 238_L keyboard layout works for my pc. But, i can not find this layout in my ubuntu.
View 2 Replies View Relatedhow to install dns step by step
View 1 Replies View RelatedI'm an OpenSuse user wanting to try something different.Ubuntu Studios caught my attention. I had a brief play with an older version a while ago and liked whatI saw.Im having problems installing though.I've downloaded the 32bit version from the studio website link, and burnt the DVD.However the install always fails at the same stage: Select and install software.The error message is not specific, and no more information is given other than the step has failed.Any ideas what could be causing this? Ive tried to burn the DVD several times, on 2 different machines, but no luck so far.
View 8 Replies View Related