Debian Installation :: Black Screen Right After Startup Post Install
Feb 23, 2016
I have installed Debian Jessie 8.0.3 64-bit net install on a MSI CX620. Installation went fine but trying to boot it up the first time nothing but a black screen shows up. I've tried:
Holding shift on startup - Nothing
Press down all keys - Not much, only ctrl+alt+delete makes the screen turn off and then on again.
I'm thinking that I had secure boot on which I now after installation see could be a problem, but I didn't think it would be a problem as I could just go into bios and turn it off, but seeing now that I can't even go into bios it may be a problem.
View 2 Replies
ADVERTISEMENT
Mar 19, 2011
I have Windows XP & Fedora 14 on separate hard drives.seem to see POST upon startup. Same for Windows or Linux.
View 14 Replies
View Related
May 29, 2011
I run a live cd I downloaded, right? Everything goes fine - it installs with no real issues whatsoever, when all of a sudden after the install it boots to nothing but the famous black screen with a white, blinking dash.So, what do I do? It was installed on a Dell Inspiron 9300 laptop, and I ended up completely wiping the XP drive to do it
View 4 Replies
View Related
Aug 22, 2014
I thought I'd breathe some new life into my aging PowerMac G5 desktop computer by installing debian. I burned the CD and ran the installer and everything installed okay, but when I went to boot it up for the first time, the screen blacked out after a few seconds of scrolling text and shows no signs of life after that. The computer just stops sending video to the monitor, and the only thing I can do is shut it down by holding down the power key.
View 13 Replies
View Related
Mar 8, 2010
I've just put a fresh install of 64 bit Lenny on my new HP server. All went well so I thought to install KDE. On reboot, the screen just goes black.Could I have some helpful suggestions on how to start working out what the problem could be?
View 7 Replies
View Related
Jul 16, 2015
I got a Lenovo T430s and when I boot up the USB I am presented with different options like
install
install graphical
install 64
install 64 graphical
etc
When I pick one and hit Enter I am presented with a black screen.
View 6 Replies
View Related
Sep 12, 2010
After updating ubuntu 10.04 a few days back, I get a black screen at startup without a flashing cursor or anything. I'm kind of new to ubuntu but not completely.
System specs:
Processor: q6600
Graphicscard: xfx nvidia gforce 9800gtx+
Motherboard:asus p5ql pro
2 HD's 320gb and 250gb
I'm dual booting with windows 7.
View 3 Replies
View Related
May 14, 2015
I installed jessie amd64 lxde to a thumb drive to use with a laptop. Vanilla install using the amd64 lxde live cd. Upon booting the usb system, I am presented with a black screen with blinking cursor. No grub screen, no ability to type any commands and no ability to switch to another terminal. I tried booting into the live cd and I could get into the intro splash screen. Booting to the live system from there would also hang at a black screen.
However, using the kernel parameter "nomodeset" from the splash screen did allow the live system to boot to the desktop. I booted the live system, mounted the usb system and chrooted into it. I edited /etc/default/grub to include "nomodeset" in the GRUB_CMDLINE_LINUX_DEFAULT and GRUB_CMDLINE_LINUX variables and then ran update-grub.
Upon reboot to the usb system the problem still occurred. The video card in question is a amd firepro 5800m which has an lspci line of mobile radeon 5000 series. This card was supported in wheezy and apparently works with the live system.
View 5 Replies
View Related
Jan 3, 2011
I am using the actual "testing", Debian works in version 5 on my notebook (or at least starts), but I can't use it b/c I have too much new hardware what is already implemented in the testint Version. I already had debian 6 running but that wasn't the good way to do it.
I have an Alienware m17x R1, with a q9000, a nivida mobile 260gtx. I know that the Problem the basic Debian Driver for Nvidia cards is. It is enough if I can use at least the command line of Debian to install an actual Nvidida driver and get the system running. But that's not possible!
I solved it once, with plugging in an External Monitor to my Notebook, but I don't have one at home at the moment and honestly there must be a better way for. How to "let debian 6. use the Notebook Screen"?
View 4 Replies
View Related
Aug 29, 2014
I appear to have the exact problem that is currently listed in the 7.6 errata about EFI boot and black screen while trying to install ("Potential issues with UEFI booting on amd64"). The problem is that their workaround is not an option for me. This is a new rig and the motherboard doesn't appear to have any kind of ability to disable secure boot. I also don't know if my problem is exactly what they're thinking when it comes to that entry.
I'm able to get to the Grub install screen where you have the option to install Debian but when I select an option (any option) the screen turns off, back on but is black. All activity in the system stops after a few seconds (3-5 seconds) and that's it, she's done. I've tried all the options to try and disable secure boot but the options listed below are as close as I can get (and apparently should be sufficient).
The CD ISO used was the 7.6 netinst CD. I've also tried the Jessie ISO (Testing) that was downloaded about 2 hours ago. Same results. Unlike the errata which says "intermittent booting problems", my issue is consistently reproduced with no other result no matter what I do.
The rig:
-Asus H97-Plus running revision 2202
-Intel i5-4570
-32GB DDR3-1600
-128GB SSD Drive
-No external video card - using on board only but have tried both VGA and HDMI ports with the same result.
BIOS settings (is it still called BIOS or is it UEFI now?)
-Fast Boot: Disabled
-Launch CSM: Enabled
-Boot Device Control: "Legacy OPROM Only" or "UEFI and Legacy OPROM" (tried both)
-Secure Boot State: Enabled (it's grayed out and I'm unable to change this)
-OS Type: Other OS (supposedly makes it so you can boot non-Windows OS)
The Debian page with the errata: [URL] ...
Look for "Potential issues with UEFI booting on amd64"
The obvious suggestions I've tried:
-tried USB boot & CD boot - same result
-tried altering the grub script to add the ACPI options - no effect
View 1 Replies
View Related
Apr 29, 2011
After installing debian squeeze I tried installing a nvidia driver. I had to type: /etc/init.d/gdm3 stop The nvidia driver wouldn't install because the 'make' command was missing in a path or something. Now I cannot get the GUI anymore. startx gives me a blank screen rebooting the computer gives me a blank screen. I can only boot in recovery mode. but the nic doesnt work so no internet connection.
View 1 Replies
View Related
May 8, 2011
I am running ubuntu 10.4, windows 7, and I had ubuntu 10.10 on a single hard drive. I upgrade the 10.10 system to 11.4 and now my grub menu which is on the 10.4 system shows two windows and two 11.4 installations.
How can I clean this up? Also I have tried to start with the grub 1.99 on the 11.4 system and all I get is a black screen at startup. I am happy with grub on 10.4 except for the extra lines.
[Code]...
View 9 Replies
View Related
Oct 16, 2010
I just installed Kubuntu 10.10 x64. I copied de .conkyrc from my Ubuntu install, where it worked fine, to my Kubuntu install. But now, it's quite awfull. I've put a screen at the bottom of the post.[URL]
View 1 Replies
View Related
Apr 6, 2011
I installed a Raid 2+0 a couple of days ago with windows 7, and everything was working fine until today. I left my computer for a couple of hours and when i came back all i see is this black screen with a blinking cursor, then i tried everything on the bios but every time i tried to boot it kept stuck there, right after the bios POST.Then i tried changing the SATA ports, that was something that fixed similar problems on my old Mobo, but this is strange because this mobo has 1 week, and the HD's (2x seagate 500gb) have 2 days, so they should be fine.
Then i tried with my ubuntu lucid lynx live cd, it has saved my life many times, it always works flawlessly and i thought i could use it to restore the boot files, but i was very surprised when it failed as well, it pops a message saying something like "invalid user pwsuid "user: unknown"{0}". Tried it many times with no luck, only that same message...Now i managed to boot from a "slitaz" linux dist. thats about 30mb, it has many useful tools.I can see the partitions/HD's on the Gparted and mount applications, but i still i havent managed to mount the raid i had on my Windows 7 install, im a bit scared of losing data, and i dont even know how to do it.Is there any way to fix thisrom the slitaz live cd?Maybe i could mount the Raid and then restore the Boot files from the slitaz live cd? I have a windows image i could use on the Raid, and i could copy the image files to a partition, make it primary, active and bootable...I really dont know, maybe that wont help either because the ubuntu live cd couldnt boot, i really dont know what whats going on and what could be the cause of this... maybe a worm/virus
View 2 Replies
View Related
May 15, 2011
When restarting my dual boot system I wanted to start Win XP. Scrolling down the list I think I hit the left arrow key by mistake. I got what I think is the recovery menu. I chose #1, Continue Normal Boot (at least that's what I think it was). Then I was prompted for my login and password. The system accepted those and seemed happy but will go no further.
I've tried entering 'exit'. This simply causes the system to ask for login and pword again. see the attachment of my screen. I've searched the forum and haven't found a similar situation with a solution.I am reluctant to pull the power to shut down. Until this my system has been very stable and reliable.
View 3 Replies
View Related
Feb 22, 2011
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies
View Related
May 1, 2011
I used "Startup Disk Creator" to make a bootabel USB drive with 11.04. I followed the guide #2 from (I use 10.04). Everything went fine while making this. I re-booted and selected this USB and selected the "Try it" button. I looked at how 11.04 looks like for about 10 seconds and did not do anything and re-booted.Now there is onlyblack screen with absolutely no text and there is nothing I can do [URL]
View 1 Replies
View Related
May 22, 2011
Downloaded and copied to a usb pen drive the latest debian testing snapshot netinstall iso:
wget url
then
dd if=debian-testing-amd64-netinst.iso of=/dev/sdb
Everything went fine, even the install part.After the 1st boot, problems started. I've never seen so much errors after a first install and probably they are all reported.
1. ata_id[297]: HDIO_GET_IDENTITY failed for '/dev/sdb'
2. mkdir: cannot create directory `/run/udev/rules.d/': Read-only file system
3. startpar: service(s) returned failure: udev ... failed!
4. INIT: Id "co" respawning too fast: disabled for 5 minutes
5. eth0 doesn't automatically start; one has to start it via ifup eth0
After that, installed a minimal xserver-xorg-core, xserver-xorg-video-radeon and kde-plasma-desktop.
I'm unable to use the newly DE environment, the screen just freezes, I'm guessing because of the udev error.
I have to restart via Magic SysRQ key:
Alt+PrtScr+S > Alt+PrtScr+U > Alt+PrtScr+B
View 4 Replies
View Related
Jul 19, 2011
HP laptop with Intel graphicsunning Slackware current with a 2.6.38.7-smp kernel.Booting with the "nomodeset" kernel parm works but X gets stuck with a 1024x768 resolution. When booting without, the screen goes black after a few pages scroll by, just at the point where the console switches to a higher resolution. Changing to a different console didn't help, so I blindly log on and type startx, and the screen comes back to life with KDE running at the higher 1366x768 resolution, I try a few apps, the webcam, suspend to RAM, resume, and everything is now working flawlessly so it doesn't look like an X issue.At this point I can change to another console (or exit KDE altogether) and the screen is back on at the higher resolution. Looking at the X log and some dmesg output makes it seem that starting X possibly replaces, reloads or unloads a driver? If this is the case, how can I prevent the conflicting driver from loading in the first place?Quote:
dmesg |grep drm
[ 11.481967] [drm] Initialized drm 1.1.0 20060810
[ 11.637941] [drm] MTRR allocation failed. Graphics performance may suffer.
[code]...
View 4 Replies
View Related
Nov 30, 2010
Recently my laptop running Ubuntu 10.10 has had an abrupt power shutoff (actually several times -- my battery has some problems).
Now when Ubuntu boots, I get the startup screen, but after a few seconds, the screen goes black. I can still boot from the live CD and in fact I am using my computer from the CD to write this post.
A few more details: When I press the power button while my computer is in this "blank" state, I get hard drive activity. Also, if I press "power", and then "enter", the machine actually shuts down.power
View 3 Replies
View Related
Mar 7, 2011
I am just new in Linux. Last week I install Linux Fedora12 into my notebook. The problem is sometime it come black screen when we want to start after booting. It also blank screen when want to tab to other properties in system. It is due to graphic card or else which the system used ATI Radeon.
View 1 Replies
View Related
Feb 3, 2011
This is my first attempt at Debian. I am running Ubuntu right now and have run puppy linux in the past. I have an iBook G3 that I put Debian PowerPC on. The install went fine. However, on initial startup, when I believe it should boot into the true GUI, it simply gives me horizontal lines that start white and then turn blue. They move slightly. The computer did have a funky graphics chip prior to install, but I am not convinced that it decided to crap out right after the install, especially considering I can see the startup procedure fine.
View 13 Replies
View Related
Jun 30, 2015
I have problem with my Debian. Sometimes after reboot I can see only mouse cursor (moveable) and black screen with command prompt in top -left corner. I don't know how to fix it...
Code: Select allroot@debian:/home/rafal# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 8.1 (jessie)
Release: 8.1
Codename: jessie
[code]....àwwwwwwwwwwwwwwwwwwww~s
View 9 Replies
View Related
Dec 14, 2010
I've been running 5.05. Just in the last few weeks after I update the screen will go black after a few reboots. I believe it has something to do with the ATI Drivers. If I clean install and install the smxi drivers after a few reboots the screen goes black right before the log in screen. This also happens with Mepis and Dream Linux which are Debian Base.
View 6 Replies
View Related
Jan 8, 2011
after a couple of years using Debian derivatives, I decided to try debian 5. Seemed to install okay. Installed Mint afterwards (as debian didnt boot) and debian is visible in the boot menu. Upon selection of debian, I just get a black screen and the monitor gives the message "input not supported". I havent had any such problems with numerous distros over the 2 years.
View 10 Replies
View Related
Feb 27, 2011
I recently installed Debian squeeze on one of my older pcs. I have had this computer for a long time with windows so I know there is no hardware issue. About half an hour after being turned on in Debian the computer goes to a black screen and the num lock caps lock and scroll lock keys flash.
View 1 Replies
View Related
Aug 14, 2010
My KT4AV-based PC has burned up two GEForce 6200 cards, so I decided to try an AGP bus Radeon HD 3650.At the same time as the nVidia card went "black screen" (no video at all, not even text) my CMOS battery died.I put in a new CMOS battery and fixed up the CMOS settings as well as I can.I put in an old Trident TVGA96PCI cardnd got as far as terminal mode, but even with the xserver-xorg-video-tridentdriver already n the system, I couldn't get the display manager to run. I gave up on the Trident card becauseold and bought a new Radeon HD 3650 card and changed the display bus from PCI toAGP in the CMOS settings.
The Radeon card now also gets me only to terminal mode.tried coaxing the system by renaming xorg.conf, but that didn't help - rebooting still gets me nowhere,no new xorg.conf file. The renamed one is still configured for the nVidia card. The xserver-xorg-video-radeon driveris also present, as "sudo apt-get install xserver-xorg-video-radeon" tells me it's already the latest version.I'm presently stuck without direct network support, as the ethernet connection hangs the computer during rebootthe message, "ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready." If I unplug the ethernet cablefor starting successfully, when I plug it back in while I'm at the command prompt, I get a message to the effectthat eth0 up and running,"ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready" messageappears again and the sytem again freezes.I have successfully pinged this PC from another on the network, but not while it's hung up at the above-quotedmessage. In that case, it's "unavailable."How do I purge the system of the nVidia stuff and replace it with an approporiate Radeon driver ?
View 4 Replies
View Related
Nov 19, 2010
I'm having problems with the screen going black on startup in 10.10. It appears to go completely off (no backlight or anything). If I press ctri+alt+f1 I get a terminal, then I can ctrl+alt+f7 and the desktop appears. I have tried setting the mode to the correct resolution in xorg.conf and I tried using the vesa driver, but it still doesn't work. My graphics card shows as sis 661/741/760
View 5 Replies
View Related
Apr 18, 2011
I'm doing a dual boot Ubuntu 11.04 and Windows 7 on my Asus UL80v. When I restart and keep going into Ubuntu I'm fine, but I think if I go to Windows and then restart, the infinite start up happens, and I'm currently stuck in this. It'll go to the OEM screen, then a black screen with a cursor, then it goes black, and then back to the OEM screen and so on and so forth.
Luckily I have Ubuntu 10 on my flash drive, so I'm booting to that while I try to figure out this. Which reminds me, when I use the flash drive, there's an option to boot to local disk which also does not work, if that's worth anything. Before this happened, I ran check disk on windows because I ran into some partition troubles. There seemed to be no problems, and I can still access the drives from this flash Ubuntu.
View 1 Replies
View Related
Aug 4, 2011
I'm having a problem with a server I just got. The first thing I did when I got it was to format the drive and install ubuntu server, but on booting up I got a black screen and my monitor (samsung syncmaster914v) displayed a bouncing notification with the text "not optimum mode recommended mode: 1280 x 1024 60hz". However at one by using a combination of plugging in the monitor after booting, and pressing random keys on the keyboard I was albe to boot into the server, and was able to access the monitor meu, which told me it was running at 640x480, and 60 hertz. having access to the console I stupidly tried changing the resolution and then rebooted, getting the same black screen.
View 2 Replies
View Related
