Ubuntu Installation :: Software Work For Kubuntu And Xbuntu?
Jun 23, 2010
So I wanna try out xbuntu and kubuntu but will software that says it will install on ubuntu will it install on the others too just as easy? On a side note are there any distros that will be more windows like? where i can install stuff using an exe? I'm horrible with this command line thing. It dont even have to install with exe just as long as it will install without me having to use the command line prompt thing.
View 7 Replies
ADVERTISEMENT
May 2, 2010
I was trying to install packages from the Kubuntu CD to get the Broadcom driver installed but when it tried to load any of the packages on the CD it said they couldn't be found. I ultimately ended up copying the packages from the CD and installing the packages and their dependencies by hand through the console.
View 2 Replies
View Related
Mar 29, 2010
I was trying to setup gogui to work on kubuntu, using instructions found on an ubuntu forum: [URL]. I did not even have Java installed yet, so I first tried installing some of the sun-java6 packages. Usually kpackage is good at picking dependent packages and installing them also, but apparently not this time. Next time I tried using kpackage, I was not able to do anything. It gave me a message saying I had broken dependencies, and should use synaptic or aptitude. I do not even have these installed! I think that un-installing the Java software and starting over should do the trick, but I'm not sure how to do this from the command line. Also the instructions in the link above never worked for me.
View 2 Replies
View Related
Jun 30, 2011
I have been experiencing this problem from when i switched to xubuntu desktop. The screen freezes each time I leave my system idle for an hour or so and hence I am forced to manual reboot each time this happens. This is annoying and I would love to know if I could do away with this trouble.
View 7 Replies
View Related
Mar 24, 2011
I am using Xubuntu 10.10 64bit . When I press the quit or logoff buttons on the desktop it takes me to the logon screen and then at the bottom right corner it allows me to shutdown or reboot. I would like to bypass this screen entirely,and just shutdown reboot from the desktop. Only I use this machine at home ,no none else needs to log on. Is there any way to do this?
View 3 Replies
View Related
Aug 12, 2010
In earlier versions of (K)ubuntu, I have used SCIM and the Yawerty input method to input Russian with a phonetic Latin keyboard.SCIM does not seem to work with Kubuntu 10.04, and UIM does not have (as far as I can tell from searching the repositories) Russian input.The Russian keyboard layout installable in Kubuntu is in the Russian version of the layout, rather than a phonetic Latin layout; I am not familiar with the normal Russian layout and I do not have stickers to stick on the keys to guide myself in using that layout.
View 2 Replies
View Related
Apr 4, 2011
i cant get minecraft to work on kubuntu i found a thread that helped install a different java but i am unable to complete the install because i can not press ok for some reason.
View 2 Replies
View Related
Feb 21, 2010
I'm using kubuntu-9.10-desktop-amd64.iso live (booted via grub2 loopback directly from iso on hd, in case that makes a difference). Processor is a E2180 which according to the Intel website supports the NX bit. I've enabled the option "Execute Bit Support" in the BIOS. /proc/cpuinfo shows both nx and pae in both flags lines. But dmesg says "Using x86 segment limits to approximate NX protection".
View 2 Replies
View Related
Jun 25, 2011
I have a problem with a new mouse that I just bought. I cannot get my new Cyborg R.A.T 3 mouse to run under kubuntu. I am able to control the cursor and click on items that appear in it's immediate window. Example: I can click K start icon, but I can't interact with the actual start menu once I've opened it.
View 1 Replies
View Related
Jun 8, 2010
On kubuntu 9.10 my sound was working fine. less than a week ago i upgraded to kubuntu 10.04.After the upgrade the sound did not work at all. i made sure that my volume was turned up and that my volume was not on mute. so far i have gotten no sound on 10.04
View 4 Replies
View Related
Jan 20, 2010
I have a fresh install of Kubuntu on an old Dell Dimension 2400 that seems to be working perfectly except for the network connection. I have a wired network connection to a linksys router connected to a cable modem. This connection works on other devices.
Code:
ifconfig
eth0
Link encap:Ethernet HWaddr 00:0b:db:b6:cf:09
[code]....
View 9 Replies
View Related
Feb 4, 2010
I recently installed Kubuntu 9.10 in Compaq CQ40 616tu laptop. To connect to internet, the only option i have is via wireless. But the wireless tab is found disabled in it. How to enable it and get it work?
View 3 Replies
View Related
Jun 28, 2010
I have detected some problems when I try to record sound in my Kubuntu 10.04 system.
The problem is that the "default" device for audio recording does not work but I have to select another device to do so. I always selected the "default" device for audio recoding but currently I have to select hw:0,2 device.
Another odd thing is that different programs show me different device. For example, Audacity shows me that I have the following audio recording devices:
- HDA Intel: ALC888 Digital (hw:0,1)
- HDA Intel: ALC888 Analog (hw:0,2)
- spdif
- default
The only one that works is hw:0,2.
But arecord shows me (when I execute "arecord -L") the following:
Finally, in KDE system preferences for audio I get that I have 2 different audio devices for audio recording:
- HDA Intel (ALC888 Analog): it is said that it will try first x-phonon (CARD=0, DEV=0) and, if the latter does not work, it will try plughw (CARD=0, DEV=0)
- HDA Intel (ALC888 Digital): it is said that it will try first x-phonon (CARD=0, DEV=1) and, if the latter does not work, it will try plughw (CARD=0, DEV=1)
Where is the hw:0,2? and how can I set the alsa system to use hw:0,2 as the default device for audio recording?
All of that would not be a problem but I also have an ubuntu 9.04 installed on a virtual machine (by using virtualbox) and audio recording doesn't work there. I suppose that it is becase of the virtual sound card is using default devices for playing and recording audio.
I must say that audio playback works fine in both host and guest systems. It is just audio recording.
View 6 Replies
View Related
Sep 15, 2010
I have two OS in my system. Windows& and Kubuntu. Both are in separate hard disks. I was using both. In between i have upgraded my system. now when i am giving priority to hard disk containing kubuntu, i can login to kubuntu, but cant get in to windows7. i have upgraded grub but not working. when i am giving priority to hard disk containig windows7 it enters and work properly. but not working in the previous.
View 1 Replies
View Related
Mar 31, 2010
XP Pro SP3
Ubuntu 9.10
Kubuntu 9.10
Tri-booting. They were installed in the order I listed above. I ran into a few bugs with Kubuntu, so I no longer want to use it. I want to use GParted on a LiveCD to format Kubuntu and expand my Ubuntu home partition to sit on top of Kubuntu's space right now. If I nuke Kubuntu, will Grub still exist with my Ubuntu/XP entries to boot?
View 4 Replies
View Related
May 20, 2010
Canon MX320, MX330, MX860 printer installation on Kubuntu Lucid 10.04 AMD64 bit. I am sure Ubuntu Lucid is similar. Once I upgraded to Lucid 10.04 AMD64 bit I found that getting a Canon Pixma MX printer installed was not going to be easy. So I thought it help others if I posted my experience here. To pull this off you will need both the Debian package, (.deb), and the source package from either
Canon Europe: [URL]... Or Canon Australia: [URL]... NOTE: The only reason to get the source is to access the ppd files. They are in the Debian package but it is a lot more work to walk newbies through unpacking the .deb. Since there are errors in the source code it makes impossible to compile a driver. Therefore, you will need to install the 32bit Debian package and force the architecture, then add the correct printer driver from the ppd file in the source package. While these instructions worked for me there are a few assumption I make which mat affect your outcome. My MX860 has a wireless network connection.
In other words I have no idea if this will or will not work on a USB attached printer. (If someone would be kind enough to post back if they get that configuration working that would be cool.) The other assumption is that the general reader is relatively new to Lunix and the command line interface. The commands were cut and pasted from my working kconsole, so they should work for anyone.Here we go:........
View 9 Replies
View Related
May 1, 2010
After the upgrade from 9.10 to 10.04 resulted in a black screen after reboot, I decided to don't waste more time, backed up my data and made a fresh installation.
First Issue [solved]: After I inserted the Kubuntu 10.04 Live-CD and started the system, I got to the CD's boot-mode selection menu. When I selected "Install Kubuntu", I got the Kubuntu bootscreen, but the system hang up then. I was able to solve this problem through pressing F6 in the boot-mode selection menu and setting "nomodeset". I also had to remove "quit splash" from the boot-entry line. Afterwards the installation process was fine.
Second Issue: I wanted to boot my new installated system, but, off course, got the blank screen again. So I edited the Grub-entry for recovery mode in the grubmenu (replaced "quit splash" with "nomodeset") and booted into recovery mode. I selected "netroot", and installed the proprietary nvidia-drivers with "apt-get install nvidia-current". Afterwards I ran "nvidia-xconfig" to generate the xorg.conf. To solve the blank screen issue, I edited the /boot/grub/grub.cfg the same way I described above and rebooted. Now I don't get a blank screen anymore, but I also don't get an XServer. The system boots now (off course without splash and "unquit"), but drops me into the tty1... When I type "sudo service kdm start", I get into KDM and can login, but I get many errors and crash-reports there. I also don't have any internet. I only have internet when booting in recovery mode and select "netroot".
I'm a bit surprised that Ubuntu released a LTS-Version that causes so much trouble (I've searched the forum and it seems that I'm not the only one with such big problems). Has Ubuntu droped support for NVidia-users?
View 9 Replies
View Related
Mar 7, 2011
I would like to apply KDE on my Kubuntu because the current one blew up. But each time I to sudo get-apt it seems to be fetching from the cloud. Is there a way I can make it to read from my local Kubuntu CD? I have both Ubuntu 10.04 LTS and Kubuntu Live CDs.
I believe the local disk read should be faster to translate than to bite the bytes across thousands of miles over the wire right?
View 1 Replies
View Related
Sep 1, 2011
I am coming from the Fedora world where everything is on one DVD and you just install it. I tried to install Kubuntu 11.04 using LVM, and I selected manual partitioning setup during the install, but there is no option for setting up LVM. Am I using the wrong version, i.e. it only works with the server edition? I saw somewhere that it may magically become available in expert mode...Is that true? Somewhere else it recommends using the alternate CD?Also, maybe I am attacking this the wrong way. I want to set up a server with KDE, so what is the best method:1) Install plain ubuntu, then add KDE + any server programs.2) Install Kubuntu, then add any server programs.
View 2 Replies
View Related
Sep 4, 2010
runlevels 2 -5 are identical in Ubuntu. /etc/init/rc-sysinit.conf is used instead of /etc/inittab for changing the runlevel. But there's no point doing that since the runlevels are identical. The default runlevel is 2, so I tried to find some service I could disable in /etc/rc2.d. I didn't find anything I could work with.
View 4 Replies
View Related
Jan 2, 2010
I just installed kubuntu on my fakeraid system and need help adding it to grub. I need to find the partition it is on. fdisk -l craps on me because of fake raid and i need to know what version of the kernel was installed. (in other words what version does the live cd install?)
View 2 Replies
View Related
Jan 19, 2010
is there any way to upgrade my install of Ubuntu 9.10 to Kubuntu 9.10 and keep my files and settings?
View 3 Replies
View Related
Feb 2, 2010
I'm trying to install Kubuntu from CD. On the 4-th step (Disk Setup) chose Manual. I have 4 partitions on my hd, but installer don't show me anything, except whole disk(sda)
View 2 Replies
View Related
Feb 4, 2010
Is there koffice 2.1.1 ppa for kubuntu 9.10?
View 1 Replies
View Related
Apr 26, 2010
I'm a Linux n00b and installed the 10.04 rc of Kubuntu on a second partition as a dual boot with XP.
Now I'm thinking I would rather have Ubuntu. What is the best way to switch over?
View 7 Replies
View Related
Jun 3, 2010
I have recently tried to migrate to kubuntu. I am reading manuals and studying the matter right now, trying to find help via googling and stuff, but for some (i suppose, trivial) matters i just cannot seem to get help and reading manuals leads me nowhere.I am sorry if my questions seem trivial or are answered in manpages or on this forum, i tried searching and didnt found...
1) how to correctly install something, for which a "Stable Source Release" is provided. Especially when options are to be set
2) how to get knowledge about what version of something (in this case, ntfs-3g) is installed in my system, and what kind of options were set when it was installed
3) what exactly happens when i type "make" withing a folder i just extracted my "stable source release" gzip to?
4) what exactly happens when i type "make install", how does it know where to put what files, make changes to my system etc...
5) how to undo what it (make install) has done (because i had already corrupted one installation of kubuntu by simply doing an unsuccessfull make install of an x-fi driver package and then an alsa package)
6) when i install something with "apt-get install <packagename>" does the downloading of "source stable" happens and "make install" is ran for me, or something else?
7) Do gui package managers just do the "apt-get install <package name> " for me when i check to install something or do they do something extra aside from that? Like synaptic?
8) when i install something with the same name, but different version, what happens? like if i do an "apt-get install XYZ" of version 2.0 when i already have XYZ of version 1.0 installed, will 1.0 get overwritten by 2.0 or will i have both installed in my system?
9) how do i know which "options" are used when i do apt-get install of a package? for example, if package says "build with this option to achieve this result" how do i know if this option is on or off or can i control it when i apt-get install this package?
10) if i installed something with "make install" - can i later uninstal if with apt-get uninstall package or i have to somehow manually remove files? what is the common procedure?
11) if i installed something with "make install" - can i later upgrade it with "apt-get"?
12) why i read in books, like for example here (http://rute.2038bug.com/index.html.gz), that i should partition my disk in multiple partitions:
- one for swap
- one for / file system
- one for /usr
- one for /tmp
- one for /var
- remaining space goes for /home
because then if one gets overflown, full or broken, it wont affect the others, and you can afford to loose some and it eases the recovery of system in case of a fault
but then, kubuntu installs itself just in two partitions, swap and the rest? Is multiple partitions scheme outdated or?
13) Why if i ctrl-alt-f1 out of my KDE and run kate (any gui program), it says "cannot connect to X server" while xserver is indeed running on my pc (otherwise how would kde work?)
14) what is under ctrl-alt-f12, f11 etc, it is a blank screen with a cursor in top-left
15) is there a way to set the vga mode for tty's that are accessible with ctrl+alt+f(1-6) to 80x50 (i prefer that over the 80x25 that is set by default there)
i've read that you could do that in lilo config files you just do vga=extended
but now kubuntu uses grub so... how do i do that?
16) i've read that "linux is good because you can shut down an app that hangs your pc by going to terminal and sending a kill signal, something you cannot do in windows because windows has no way to escape a frozen gui"
But when i had a way to test that in practice (today i tried some decoration scheme for my KDE and it froze my desktop) i found out i have a freaking lot of processes running (with ps -A) and.... well, what should i have done to unfreeze my desktop? And how do i know what exactly hangs my PC in order to terminate it? (like in windows - you very frequently have a nearly dead non-responding pc, but doing CtRL-ALT-DEL shows that "system idle" has about 3/4 of your processor time and there is no problem with memory consumtion either, yet system barely can respond to your input")
17) i've heard and read about "linux needs no reboot" but in practice, installing nvidia drivers requires reboot, for example. So, is it really true or there is a way to make those drivers go without rebooting, they just tell me to reboot because i'm considered a newbie who doesnt know that "linux does not need reboot"?
18) KDE is very annoyingly preventing me from doing anything in "LEAVE" menu without a 30second-confirmation box (shutting down in 30 s...)... and i dont seem to see any settings for that in the gui... same goes for asking me to close my tty's - can it do it by itself? what config file should i edit?
19) As i read, linux filesystem philosophy is that settings go into /etc and that everything is a file, so, in order to change anything in my system it boils down to editing a file. Now, why do the files are so scattered? For example, why does alsa config file live as a hidden file (starts with .) in my home, and a file to set up mounting behavior lies in /var/lib/polkit-1/localauthority/10-vendor.d/com.ubuntu.desktop.pkla or /usr/share/polkit-1/actions/org.freedesktop.udisks.policy.
Do only system apps like mount use /etc for their configs, and how do i generally know where to look if i want to change something (like in windows, i'd go look in the application path, in my user folder's corresponding folders - my documents, application data etc and in registry).
20) As i read, linux ideology is about program scattering istelf all over the file system. Countrary to windows where program occupies a folder in which it nests its own folder tree (like data, sound, themes), a linux is said to put binaries into /bin, configs into /etc and so on. What happens if programs are called the same or use same files? For example, if two people make a program with a same name or use same file (for example, alot of windows programs used to use settings.ini to store user settings, if that would be in a same folder...?) or make a same short name for their program (like a long program name abbreviated to three letters for simplicity, but what if two programs have same abbreviations?).
View 6 Replies
View Related
Jun 18, 2010
I am being told I need to upgrade from 8.04 to at least 9.10 on another linux forum. I like KDE 3.5 and I CANNOT STAND KDE 4 I tried it like 3 or 4 times and I cant stand it... I tried that TRITON or whatever it is with 10.04 with kde 3 but it kept messing up like I would go to install updates it would say 83 updates but it only installed 7 anyways I said no to that and went back to 8.04 and I got the /! icon blaring at me saying hey idiot upgrade to 9.10. I mean I am doing fine on 8.04 I mean I got the latest thunderbird and updated pidgin to 2.7 I mean everything is up to date so its like why give it up? I am scared to go to 9.10 cause 3.5 will be gone and I will be stuck with KDE 4.0 ( the 1st version ) and I dont want that I want 3.5.
View 2 Replies
View Related
Oct 17, 2010
Is Kubuntu 10.10 stable?? At the moment i'm using Kubuntu 10.04, should i upgrade to Kubuntu 10.10(Is it stable??)
View 4 Replies
View Related
Apr 11, 2011
I am trying to install Kubuntu but the computer won't start after installation is finished. I think it has something to do with the way Kubuntu names the hard drives which doesn't match the way Grub names them...being a noob I don't even know if that makes any sense, much less how to fix it. Here's what I know. I install Kubuntu to a 16MB SSD. That shows up as "sdc" during Kubuntu installation. I select "use whole disk". Installation goes thru, computer won't start
Now if I install Ubuntu to the same 16MB SSD, it shows up as "sda" during Ubuntu installation.Installation goes thru, Ubuntu boots perfectly.
View 2 Replies
View Related
Jan 29, 2010
want to ask how to install kde (not kubuntu-desktop) in ubuntu 9.10
View 6 Replies
View Related
