runlevels 2 -5 are identical in Ubuntu. /etc/init/rc-sysinit.conf is used instead of /etc/inittab for changing the runlevel. But there's no point doing that since the runlevels are identical. The default runlevel is 2, so I tried to find some service I could disable in /etc/rc2.d. I didn't find anything I could work with.
View 4 RepliesI'm relatively new to Linux and to openSUSE. I've been using 11.3 as the OS on my home server for awhile using a GUI (Gnome). I recently created a new server which is much more powerful and would like to get serious about learning the ins and outs of the system. I've learned some basic bash and would like to install 11.4 on the new server. I have two questions about this. The first is: does it add any system overhead if I install KDE but set the default runlevel to 3? I know that running the GUI takes up system resources, but I'm new enough to the system that I'm not 100% comfortable yet not having a GUI backup. On the other hand, if having a GUI installed eats up resources (other than the HDD space for installing it) even if I'm only using the system in runlevel 3, then I think I'll forgo KDE and install it as text only and just bone up on bash.
My second question is: is there a file I can edit to customize the runlevel 3 console? I just installed 11.4 on my HP Mini using KDE but defaulting to runlevel 3, and I really like the background picture and little SUSE lizard at the top of my console. Is there a way to change the background picture and logo at the top? It's probably a little juvenile on my part to want to customize this but Linux is all about choice right?
I have fedora 13 set up on a HP6715S laptop. Runlevel 3 is a problem, because the capital letters are the size of full stops. Reading a little, I can try a grub vga setting, but I am not keen as my screen is 1200x800 and X cannot set it otherwise, so I doubt grub could. There's KMS for radeon cards, and the kernel can do what it likes. The biggest font supplied with fedora is sun12x22, which doesn't even have a euro sign. I gather I can go to a height of 32. Anyone know of larger consolefonts, or a wheeze to double the size of one of the others, e.g. lat9w-16? setfont-h32 increases height, but not zoom, so it's like a double spaced console.
View 3 Replies View Relatedi performed an upgrade from fedora 13 to 14 on my test fedora virtual machine (vmware player 3) and i have this incredible problem: I normally boot in runlevel 3 and i start X only when needed with the startx command.When I want to exit from the X environment I use the "log out <username>" command on the System menu (gnome is the desktop manager). After upgrading to fedora 14 and applying all the available upgrade, this won't work anymore! I'm able to start the X environment but when I try to logout the window/desktop manager got killed but X remain active, the background image is visible on the screen, no mouse or keyboard interaction is possible.
The system is stiil alive, i can login through ssh, but i was not able to do anything. manually switching the runlevel from 3 to 5 and viceversa with telinit doesn't solve the situation: switching to runlevel 5 cause the login screen to be visualized and i' can login in the gnome desktop environment but when i logout o when a try to switch to runlevel 3 I always obtain the same result: X remain active and unusable, it's impossible to go back to a text console. what can i do ? any of you has experienced a similar issue ?
I understand that the K (KDE) network manager is a KDE app but does it actually function in runlevel 3? By that I mean does it allow wireless connections to work? I've been trying to do this but can't. I have a need to while in KDE to sometime init 3 and while in runlevel 3 I need my wireless to work. I havent figured out if Knetwork manager still functions outside of KDE or if I need to just use ifup traditional.
I did search the forum for threads related to knetwork manager and did not see anything related to this so I hope someone can assist me. Also if I do need to use ifup traditional method, is there anything specail I need to do so that it works without issues such as, uninstall knetwork manager or something else? I ask this because my previous attempts at using ifup (by switching to it from YAST) end up making my wireless not work. I can scan and find my network but after entering my creds it doesnt do anything. I managed to get it to work once somehow but after a shutdown and reboot it no longer worked. Just incase you need to know, I'm running Suse11.4 KDE 4.6, my wireless module I believe is a iwlagn or something like that. My laptop which Suse is running on is a Toshiba A665-S6086 core i3, 4GB RAM, 500GB HDD.
I'm trying to init 3 .. but I can't change te runlevel...I was reading about upstart.. But I can't understand.. :-(ubuntu upstartWhy they don't want to use /etc/inittab..it is so easy...Always I have problems because someone change the way of do things in linux...
View 6 Replies View RelatedI am using suse 10.3 and my machine is giving this error.
inittab file is ok
no partition is 100% used.
reinstall sysvinit package
I have learned without a doubt what runlevels are...the questions I have are related to the init scripts and how to create a link to an init script. I see that there was a post where someone was trying to get people to do homework for them...I assure you I want to understand what I am trying to learn. That said, here are my hang ups:
1. The script that contains the default runlevel to my understanding is /etc/rc.d/init.d, though I've also found /etc/inittab on the web as the default. My book isn't too clear on this as it doesn't state it exactly, so which is it for sure?
2. My assignment asks what I'd name a link to an init script that would start a fictitious BIGD daemon early on in the boot process. My answer: /etc/rc.5.bigd.d --I don't think that this is the right answer though because in the book, it states that the /etc/rc.d/rcN.d contains names of scripts whose names begin with K and S. My understading in that this starts and kills each script depending on how it's entered.
my Sabayon desktop won't boot into runlevel 5 anymore:
Code:
ERROR: avahi-daemon failed to start
Also can't start avahi manually, verbose mode gives no extra information, debug says: (...)
Code:
* Starting avahi-daemon ...
+ /usr/sbin/avahi-daemon -D
+ eend 1
+ exit 1
* ERROR: avahi-daemon failed to start
(sic)
I suspect this to be related to the hplip drivers I installed before the last reboot, all I did was select the package in sulfur, and as it worked right out of the box, I changed nothing else.
How do I recover from accidentally set the runlevel to 0?
View 5 Replies View RelatedI have downloaded voyage linux 6.5 based on lenny. One of the last things it says is mounting filesystem as read only. then asks me to do login. how to stop this action and eave the file system as Read/Write.
When I execute "init 1" not much is happening! The wireless network drops out, but the GUI is still there. It always worked in previous Fedora releases. What is changed now? Does anyone know how to switch between different runlevels in F14?
View 14 Replies View RelatedThis probably has been asked many times, if yes I apologize and please someone point me to the old post.
If my FC14 would not boot. And I didn't setup the boot menu, How do I get into run level 1?
I boot by default into Runlevel 3 on my F12 Server. If I need GUI apps then I run startx.The server I'm using (eeeBox eb1501) has a wired and a wireless LAN interfaces. I run two networks and want to be able to connect to the wirelss one without having to start Gnome or KDE just to get the WLAN to connect.IS this someting to do with the NetworkManager or just the gnome-keyring?The wired interface comes up at boot but the Wireless one won't until I start the GUI.
View 8 Replies View RelatedI don't really want to boot into GDM as I sometimes don't need X. Apart from XFCE, I've got i3 WM. I've changed the default runlevel to 3 so that I can startx. How would I change the WM session from CLI?
View 5 Replies View RelatedI've always thought that the idea was very cool, but I get restricted by the way distros think that "httpd" and the like are the only things that should go into a runlevel - I mean Fedora doesn't even let you turn off the GUI!I want to do some lower-level hacking than that, so can someone help me?
View 1 Replies View RelatedI recently installed slackware and while I was in the process of installing video drivers, I noticed something odd. "init 3" (or init anything) doesn't seem to work for me. While working in XFCE, when I do "init 3", nothing happens. But then, when I do "who -r" it says I am in runlevel 3 even though I am still in XFCE.
View 14 Replies View RelatedI normally boot into runlevel 3. KDE is my default DE. I use
Code:
To open KDE. I would like to give the other DE's (full install of Slackware current) a fair try, but I am having trouble starting the other DE's from the command line. They all work from runlevel 4 using the kdm chooser, but that's just a hassle and in all honesty will likely irritate my lazy-bone to the point of not using them on a regular basis.
Booting into runlevel 4 isn't a good option because I am frequently experimenting and booting to the command line makes troubleshooting easier. What do I need to do to be able to start the other DE's in runlevel 3?
I installed Fedora 11 in VirtualBox, and the initial installation went fine. I then did a system update, and the video driver is broken. When I enter GDM, I have a black and blue screen, with the Fedora logo replicated across the screen.
I don't enter the Grub screen when I boot, and I wonder if there's another way to boot into runlevel 3. At one point, I'm prompted to type "I" to enter interactive mode, but doing this repeatedly still boots me into the GUI.
I recently switched my server runlevel to 3 and I don't notice any updating of any kind going on, does the updater run in runlevel 3? If it is possible, how do I do it? Is it a service that I need to start? If so, how?
View 2 Replies View RelatedI'm running a server that boots into runlevel 3. I can ssh into it but I only get a blank screen when I try to connect to the vncserver that's running on it. Is it possible to connect to a vncserver that's running on runlevel 3 or does X have to be running for the vnc to work?
View 1 Replies View RelatedRunning 64-bit Fedora 10 with original installation runlevel being 5.
So, there was this need for working with runlevel 3 for some days, then I've edited "/etc/inittab", changing line
id:5:initdefault:
for line
id:3:initdefault:
And the system went well, restarting automatically on runlevel 3.
Now it needs to restore its original runlevel, that is 5.
I've edited "/etc/inittab" to its original state but the system keeps starting on runlevel 3.
Also, I've tried
# init 5
and
# telinit 5
Both commands load X and the login screen but then when it restarts, it gets back to runlevel 3.
What can be done to get this system back to runlevel 5, automatically, during its INIT process?
I am running a mainframe emulator on an old HP server in runlevel 3 text only. I have googled a bit but found no information on controlling the text video mode in runlevel 3. When I boot my Fedora 12 system chooses the highest resolution it can meaning my c3270 terminal emulator program (80x25) is in tiny font occupying a fraction of the upper left corner of the screen. I have looked everywhere but can find no mode setting commands for runlevel 3 text only.
View 7 Replies View RelatedThat about sums it up. I have read this, but I am not sure it pertains to me exactly. Any help other than "run at 5"
View 1 Replies View RelatedI am using Fedora 13. If I boot directly to runlevel 5, the Fedora progress bar goes all the way across and then just stays at 100% and X never loads. I have to hard-restart the machine. However, if I press 'a' to append the kernel arguments and append the '3' to start in runlevel 3, login at the terminal that is displayed, and then type 'startx', everything works perfectly.
View 6 Replies View RelatedI recently updated from OS 11.2 to OS 11.3 and right after that had problems with my X.org server.If started with normal settings X crashes in runlevel 5, so right at the end of the boot process.If started with x11debug option X works, However I cannot use wine with this option.I don't even have an idea how to look for the problem, but there must be some feature that causes X to crash, which is not included in the debug-mode.
View 9 Replies View RelatedAfter successful upgrading from 11.3 to 11.4 I had to install ATI driver from here Index of /mirror/ati/openSUSE_11.4 and delete the old ones. After rebooting the system entered in runlevel 5 where I received kwin error which I couldn't back-trace with the tools, but it was working. When I have made an on-line update and rebooted again it went to runlevel 3 without showing any error. When I type startx it shows error, but when I enter as root KDE starts normally and it's functional. how to get to the KDE with my account, but not as a root user?
View 9 Replies View RelatedHow to start in runlevel 3 with grub 2?
View 4 Replies View RelatedI have installed 10.04 LTS server and after that x-window-system-core, gnome-core and gdm. Now it boots to a gui in runlevel 2.
1. How can I set the default runlevel to 3?
and
2. boot into runlevel 3 without a gui?
I need to run fsck on my Ubuntu 10.04 machine, but when trying to enter lower runlevel (with init 1), computer freezes with error message "could not write bytes broken pipe". So, how I can fix this and/or check my disk with fsck?
View 1 Replies View Related