Ubuntu Installation :: Upgrade 9.10 To Kubuntu 9.10?
Jan 19, 2010is there any way to upgrade my install of Ubuntu 9.10 to Kubuntu 9.10 and keep my files and settings?
View 3 Replies
ADVERTISEMENT
Ubuntu Installation :: Upgrade From Kubuntu 8.04 To 9.10
Jun 18, 2010I am being told I need to upgrade from 8.04 to at least 9.10 on another linux forum. I like KDE 3.5 and I CANNOT STAND KDE 4 I tried it like 3 or 4 times and I cant stand it... I tried that TRITON or whatever it is with 10.04 with kde 3 but it kept messing up like I would go to install updates it would say 83 updates but it only installed 7 anyways I said no to that and went back to 8.04 and I got the /! icon blaring at me saying hey idiot upgrade to 9.10. I mean I am doing fine on 8.04 I mean I got the latest thunderbird and updated pidgin to 2.7 I mean everything is up to date so its like why give it up? I am scared to go to 9.10 cause 3.5 will be gone and I will be stuck with KDE 4.0 ( the 1st version ) and I dont want that I want 3.5.
View 2 Replies View RelatedUbuntu Installation :: Should I Upgrade To Kubuntu 10.10?
Oct 17, 2010Is Kubuntu 10.10 stable?? At the moment i'm using Kubuntu 10.04, should i upgrade to Kubuntu 10.10(Is it stable??)
View 4 Replies View RelatedUbuntu Installation :: Failed Upgrade From Kubuntu 8.04 To 9.10?
May 31, 2010I have an Proliant DL380 that I use as a home server/router that I attempted to upgrade to Lucid. The gui upgrader first attempted to upgrade to 9.10 (as expected.)
I believe grub was incorrectly installed/updated. Not quite sure if grub2 was installed. The machine boots to a maintenance prompt. The partitions seem to be mounted read-only because of errors. The grub menu only shows an 8.04 kernel choice, even though all 9.10 packages were downloaded and, I believe, installed. The gui upgrader did fail with an error right before the "cleaning-up" stage. After "messing around" with it, the upgrader said I needed to reboot. So, I did and my problems started.
I tried booting the 9.10 Kubuntu cdrom and also a Knoppix 6 CD, but neither one would boot properly (gave me a BusyBox prompt.) So, I guess they don't like the Smart Array 6.
what I could try to fix and upgrade to 10.04? I really don't want to lose my configuration files (dhcp, firestarter rules, apache, squirrelmail, NFS, etc.)
Ubuntu Installation :: Upgrade 10.10 With Kubuntu 11.04 Live Cd?
Apr 30, 2011I am running Ubuntu 10.10 right now. I'm going to upgrade to 11.04, but I want to upgrade to Kubuntu 11.04. Can I safely upgrade from Ubuntu 10.10 to Kubuntu 11.04 using my Kubuntu live cd?
View 6 Replies View RelatedUbuntu Installation :: Upgrade From Kubuntu 10.04 To 10.11: Keyboard And Mouse Lock At Boot
Nov 3, 2010Running Landmarq Intel Atom DC330 Desktop I have just attempted to upgrade my desktop machine from Kubuntu 10.04 to Kubuntu 10.10. I used KpackageKit to do the upgrade which proceeded smoothly until the install packages phase, which seemed to complete and then repeat. I don't know the detail of what happened as I was out of the room.
The repeat almost completed, but then I got a set of error messages, which basically told me that KpackageKit was unable to install the upgraded packages. I closed KpackageKit, and closed the machine and tried a reboot. This time, I got as far as the splash screen, but although the cursor flashes, I can't type anything in the password box. In addition, the mouse pointer won't move. Using a different wireless mouse works, but I still can't type in a password.
However, the command ctrl+alt+sysrq+RSEIUB works, so the machine is accepting some keyboard input. I also know from using a live disc that my home directory is intact. I would like to revert to my 10.04 installation, and re-try an upgrade to 10.11 afterwards.
Ubuntu Installation :: Upgrade To Natty Fails - Kubuntu - Xubuntu Installed
Apr 29, 2011I have a problem, because installation of ubuntu 11.04 will fail if I try to.
I have also Kubuntu and Xubuntu installed, which I regret a lot because I cannot uninstall them as well...
The problem is that I have installed a one-time-activation proprietary software so a fresh install is no option.
The error when upgrading is, that "xubuntu-desktop" cannot be marked for upgrade!
Ubuntu :: How To Upgrade The Kubuntu
Feb 26, 2010I changed from Ubuntu to Kubuntu by installing KDE. I'm not sure if I have Ubuntu or Kubuntu now because at login I can choose between both desktops.Anyway, when using Gnome, about once a week it asked for upgrades, and then did this all in the background.
Now with KDE, this doesn't work anymore. At some point there came a screen that was similar to that of Gnome, except if I pressed ok to update and entered my password, it crashed and brought up the KDE crash handler.
Ubuntu :: Upgrade Kubuntu 10.04 To 10.10 Then Boot Is Slow?
Dec 21, 2010I recently upgraded kubuntu from 10.04 to 10.10 Slower boot time First,systen will wait a few seconds on tty1 after a few seconds then jump to the login screen Then wait for a few seconds to type When I waiting the hard drive do not do anything My hardware is lenovo r400 Intel (R) Core (TM) 2 Duo CPU P8700@2.53GHz. RAM 4G Before the upgrade are quite fast boo Become like this after the upgrade
[Code]...
Ubuntu :: Kubuntu 10.04 Will Not Boot After Safe Upgrade
Aug 17, 2010I just ran sudo aptitude update and sudo aptitude safe-upgrade. Now, the machine won't boot. It's a 64-bit system with two disks. Both show up in the bios, and I have tried booting from both. The boot process gets past the motherboard splash screen, then the grub countdown, and then it says:
Boot from (hd0,0) ext3 [lots of numbers and letters]
Starting up...
Then, this error messages appears, very briefly:
Cannot reserve MMIO region
and then the screen just goes dark.
Ubuntu Multimedia :: After Upgrade To Kubuntu 10.04 , Sound Does Not Work?
Jun 8, 2010On kubuntu 9.10 my sound was working fine. less than a week ago i upgraded to kubuntu 10.04.After the upgrade the sound did not work at all. i made sure that my volume was turned up and that my volume was not on mute. so far i have gotten no sound on 10.04
View 4 Replies View RelatedUbuntu Networking :: Wireless Internet Gone Since Upgrade To Kubuntu 10.10?
Nov 6, 2010Since I've upgraded to Kubuntu 10.10 I've lost my wireless internet. In Windows 7 everything's fine, but in Kubuntu wicd keeps giving a "Unable to get IP address message".
Here's some output:
dmesg | grep wlan0
wlan0: associate with **:**:**:**:**:** (try 1)
wlan0: RX AssocResp from **:**:**:**:**:** (capab=0x411 status=0 aid=2)
wlan0: associated
wlan0: deauthenticating from **:**:**:**:**:** by local choice (reason=3)
[Code].....
Ubuntu / Apple :: Kubuntu Lucid Upgrade Breaks Video?
Jan 13, 2011So I've got this old Apple with an nVidia chipset. Don't know much about Apples, but from random searches on google I think it's an imac g5.
Anyway when I install Kubuntu 10.04 it works until I update it, then the video dies. It looks as though the nouveau driver is being killed and nv put back in it's place, anyone have any remedies I might try?
Hardware :: No Speaker Sound After Upgrade To Kubuntu 10,04ltc?
Jun 9, 2010no speaker sound after upgrade to kubuntu 10,04ltc.toshiba laptop a200 1la
View 6 Replies View RelatedUbuntu :: After Kubuntu Upgrade From Karmic To Lucid On 32 Bit I686 Samba Script In /etc/init.d/ Gone
May 6, 2010After a Kubuntu upgrade from Karmic to Lucid on a 32 bit i686 my samba script in /etc/init.d/ was gone. Is that simply a bug or something going wrong during the upgrade, in which case I restore the script from backup, or is there a new way to start/stop/restart... samba in Lucid? Samba is working just fine after the upgrade BTW, both for print and file sharing over a mixed network.
View 5 Replies View RelatedUbuntu :: Priority To Hard Disk Containing Kubuntu Login To Kubuntu But Can't Get In To Windows7?
Sep 15, 2010I have two OS in my system. Windows& and Kubuntu. Both are in separate hard disks. I was using both. In between i have upgraded my system. now when i am giving priority to hard disk containing kubuntu, i can login to kubuntu, but cant get in to windows7. i have upgraded grub but not working. when i am giving priority to hard disk containig windows7 it enters and work properly. but not working in the previous.
View 1 Replies View RelatedUbuntu :: XP / Kubuntu - If Delete Kubuntu What's Happen To My Boot Cycle
Mar 31, 2010XP Pro SP3
Ubuntu 9.10
Kubuntu 9.10
Tri-booting. They were installed in the order I listed above. I ran into a few bugs with Kubuntu, so I no longer want to use it. I want to use GParted on a LiveCD to format Kubuntu and expand my Ubuntu home partition to sit on top of Kubuntu's space right now. If I nuke Kubuntu, will Grub still exist with my Ubuntu/XP entries to boot?
Ubuntu Installation :: Canon MX Printer Installation On Kubuntu Lucid 10.04 AMD64
May 20, 2010Canon MX320, MX330, MX860 printer installation on Kubuntu Lucid 10.04 AMD64 bit. I am sure Ubuntu Lucid is similar. Once I upgraded to Lucid 10.04 AMD64 bit I found that getting a Canon Pixma MX printer installed was not going to be easy. So I thought it help others if I posted my experience here. To pull this off you will need both the Debian package, (.deb), and the source package from either
Canon Europe: [URL]... Or Canon Australia: [URL]... NOTE: The only reason to get the source is to access the ppd files. They are in the Debian package but it is a lot more work to walk newbies through unpacking the .deb. Since there are errors in the source code it makes impossible to compile a driver. Therefore, you will need to install the 32bit Debian package and force the architecture, then add the correct printer driver from the ppd file in the source package. While these instructions worked for me there are a few assumption I make which mat affect your outcome. My MX860 has a wireless network connection.
In other words I have no idea if this will or will not work on a USB attached printer. (If someone would be kind enough to post back if they get that configuration working that would be cool.) The other assumption is that the general reader is relatively new to Lunix and the command line interface. The commands were cut and pasted from my working kconsole, so they should work for anyone.Here we go:........
Ubuntu Installation :: Black Screen After Fresh Installation Of Kubuntu 10.04
May 1, 2010After the upgrade from 9.10 to 10.04 resulted in a black screen after reboot, I decided to don't waste more time, backed up my data and made a fresh installation.
First Issue [solved]: After I inserted the Kubuntu 10.04 Live-CD and started the system, I got to the CD's boot-mode selection menu. When I selected "Install Kubuntu", I got the Kubuntu bootscreen, but the system hang up then. I was able to solve this problem through pressing F6 in the boot-mode selection menu and setting "nomodeset". I also had to remove "quit splash" from the boot-entry line. Afterwards the installation process was fine.
Second Issue: I wanted to boot my new installated system, but, off course, got the blank screen again. So I edited the Grub-entry for recovery mode in the grubmenu (replaced "quit splash" with "nomodeset") and booted into recovery mode. I selected "netroot", and installed the proprietary nvidia-drivers with "apt-get install nvidia-current". Afterwards I ran "nvidia-xconfig" to generate the xorg.conf. To solve the blank screen issue, I edited the /boot/grub/grub.cfg the same way I described above and rebooted. Now I don't get a blank screen anymore, but I also don't get an XServer. The system boots now (off course without splash and "unquit"), but drops me into the tty1... When I type "sudo service kdm start", I get into KDM and can login, but I get many errors and crash-reports there. I also don't have any internet. I only have internet when booting in recovery mode and select "netroot".
I'm a bit surprised that Ubuntu released a LTS-Version that causes so much trouble (I've searched the forum and it seems that I'm not the only one with such big problems). Has Ubuntu droped support for NVidia-users?
Ubuntu :: Point To Kubuntu CD Instead Of Kubuntu Repository?
Mar 7, 2011I would like to apply KDE on my Kubuntu because the current one blew up. But each time I to sudo get-apt it seems to be fetching from the cloud. Is there a way I can make it to read from my local Kubuntu CD? I have both Ubuntu 10.04 LTS and Kubuntu Live CDs.
I believe the local disk read should be faster to translate than to bite the bytes across thousands of miles over the wire right?
Ubuntu Installation :: Kubuntu 11.04 Installation: No LVM Partition Option?
Sep 1, 2011I am coming from the Fedora world where everything is on one DVD and you just install it. I tried to install Kubuntu 11.04 using LVM, and I selected manual partitioning setup during the install, but there is no option for setting up LVM. Am I using the wrong version, i.e. it only works with the server edition? I saw somewhere that it may magically become available in expert mode...Is that true? Somewhere else it recommends using the alternate CD?Also, maybe I am attacking this the wrong way. I want to set up a server with KDE, so what is the best method:1) Install plain ubuntu, then add KDE + any server programs.2) Install Kubuntu, then add any server programs.
View 2 Replies View RelatedUbuntu Installation :: Upgrade From 10.04 To 10.10 Error "Could Not Calculate The Upgrade An Unresolvable Problem Occurred While Calculating The Upgrade"
Feb 12, 2011I keep getting the following msg as I try to upgrade from 10.04 -> 10.10 ... "Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report." I don't think any of the issues above apply - can anyone offer advice on how to get around or "force " the upgrade
Ubuntu Installation :: Add Kubuntu 9.10 To Grub?
Jan 2, 2010I just installed kubuntu on my fakeraid system and need help adding it to grub. I need to find the partition it is on. fdisk -l craps on me because of fake raid and i need to know what version of the kernel was installed. (in other words what version does the live cd install?)
View 2 Replies View RelatedUbuntu Installation :: Kubuntu From CD - Partition ?
Feb 2, 2010I'm trying to install Kubuntu from CD. On the 4-th step (Disk Setup) chose Manual. I have 4 partitions on my hd, but installer don't show me anything, except whole disk(sda)
View 2 Replies View RelatedUbuntu Installation :: Koffice 2.1.1 Ppa For Kubuntu 9.10?
Feb 4, 2010Is there koffice 2.1.1 ppa for kubuntu 9.10?
View 1 Replies View RelatedInstallation :: Switch Kubuntu To Ubuntu?
Apr 26, 2010I'm a Linux n00b and installed the 10.04 rc of Kubuntu on a second partition as a dual boot with XP.
Now I'm thinking I would rather have Ubuntu. What is the best way to switch over?
Ubuntu Installation :: How To Migrate To Kubuntu
Jun 3, 2010I have recently tried to migrate to kubuntu. I am reading manuals and studying the matter right now, trying to find help via googling and stuff, but for some (i suppose, trivial) matters i just cannot seem to get help and reading manuals leads me nowhere.I am sorry if my questions seem trivial or are answered in manpages or on this forum, i tried searching and didnt found...
1) how to correctly install something, for which a "Stable Source Release" is provided. Especially when options are to be set
2) how to get knowledge about what version of something (in this case, ntfs-3g) is installed in my system, and what kind of options were set when it was installed
3) what exactly happens when i type "make" withing a folder i just extracted my "stable source release" gzip to?
4) what exactly happens when i type "make install", how does it know where to put what files, make changes to my system etc...
5) how to undo what it (make install) has done (because i had already corrupted one installation of kubuntu by simply doing an unsuccessfull make install of an x-fi driver package and then an alsa package)
6) when i install something with "apt-get install <packagename>" does the downloading of "source stable" happens and "make install" is ran for me, or something else?
7) Do gui package managers just do the "apt-get install <package name> " for me when i check to install something or do they do something extra aside from that? Like synaptic?
8) when i install something with the same name, but different version, what happens? like if i do an "apt-get install XYZ" of version 2.0 when i already have XYZ of version 1.0 installed, will 1.0 get overwritten by 2.0 or will i have both installed in my system?
9) how do i know which "options" are used when i do apt-get install of a package? for example, if package says "build with this option to achieve this result" how do i know if this option is on or off or can i control it when i apt-get install this package?
10) if i installed something with "make install" - can i later uninstal if with apt-get uninstall package or i have to somehow manually remove files? what is the common procedure?
11) if i installed something with "make install" - can i later upgrade it with "apt-get"?
12) why i read in books, like for example here (http://rute.2038bug.com/index.html.gz), that i should partition my disk in multiple partitions:
- one for swap
- one for / file system
- one for /usr
- one for /tmp
- one for /var
- remaining space goes for /home
because then if one gets overflown, full or broken, it wont affect the others, and you can afford to loose some and it eases the recovery of system in case of a fault
but then, kubuntu installs itself just in two partitions, swap and the rest? Is multiple partitions scheme outdated or?
13) Why if i ctrl-alt-f1 out of my KDE and run kate (any gui program), it says "cannot connect to X server" while xserver is indeed running on my pc (otherwise how would kde work?)
14) what is under ctrl-alt-f12, f11 etc, it is a blank screen with a cursor in top-left
15) is there a way to set the vga mode for tty's that are accessible with ctrl+alt+f(1-6) to 80x50 (i prefer that over the 80x25 that is set by default there)
i've read that you could do that in lilo config files you just do vga=extended
but now kubuntu uses grub so... how do i do that?
16) i've read that "linux is good because you can shut down an app that hangs your pc by going to terminal and sending a kill signal, something you cannot do in windows because windows has no way to escape a frozen gui"
But when i had a way to test that in practice (today i tried some decoration scheme for my KDE and it froze my desktop) i found out i have a freaking lot of processes running (with ps -A) and.... well, what should i have done to unfreeze my desktop? And how do i know what exactly hangs my PC in order to terminate it? (like in windows - you very frequently have a nearly dead non-responding pc, but doing CtRL-ALT-DEL shows that "system idle" has about 3/4 of your processor time and there is no problem with memory consumtion either, yet system barely can respond to your input")
17) i've heard and read about "linux needs no reboot" but in practice, installing nvidia drivers requires reboot, for example. So, is it really true or there is a way to make those drivers go without rebooting, they just tell me to reboot because i'm considered a newbie who doesnt know that "linux does not need reboot"?
18) KDE is very annoyingly preventing me from doing anything in "LEAVE" menu without a 30second-confirmation box (shutting down in 30 s...)... and i dont seem to see any settings for that in the gui... same goes for asking me to close my tty's - can it do it by itself? what config file should i edit?
19) As i read, linux filesystem philosophy is that settings go into /etc and that everything is a file, so, in order to change anything in my system it boils down to editing a file. Now, why do the files are so scattered? For example, why does alsa config file live as a hidden file (starts with .) in my home, and a file to set up mounting behavior lies in /var/lib/polkit-1/localauthority/10-vendor.d/com.ubuntu.desktop.pkla or /usr/share/polkit-1/actions/org.freedesktop.udisks.policy.
Do only system apps like mount use /etc for their configs, and how do i generally know where to look if i want to change something (like in windows, i'd go look in the application path, in my user folder's corresponding folders - my documents, application data etc and in registry).
20) As i read, linux ideology is about program scattering istelf all over the file system. Countrary to windows where program occupies a folder in which it nests its own folder tree (like data, sound, themes), a linux is said to put binaries into /bin, configs into /etc and so on. What happens if programs are called the same or use same files? For example, if two people make a program with a same name or use same file (for example, alot of windows programs used to use settings.ini to store user settings, if that would be in a same folder...?) or make a same short name for their program (like a long program name abbreviated to three letters for simplicity, but what if two programs have same abbreviations?).
Ubuntu Installation :: Can't Seem To Install Kubuntu?
Apr 11, 2011I am trying to install Kubuntu but the computer won't start after installation is finished. I think it has something to do with the way Kubuntu names the hard drives which doesn't match the way Grub names them...being a noob I don't even know if that makes any sense, much less how to fix it. Here's what I know. I install Kubuntu to a 16MB SSD. That shows up as "sdc" during Kubuntu installation. I select "use whole disk". Installation goes thru, computer won't start
Now if I install Ubuntu to the same 16MB SSD, it shows up as "sda" during Ubuntu installation.Installation goes thru, Ubuntu boots perfectly.
Ubuntu Installation :: Upgrade Disaster - Warning "installation / Upgrade Should Not Be Interupted" - Computer Froze Up
Jun 1, 2010While upgrading to a newer version of Ubuntu I noticed a warning saying that the installation/upgrade should not be interupted. Unfortunately though, during this process my computer froze up and I had to shut it down. Ubuntu no longer starts on my computer. I still have Windows though, which is what I'm using now.
View 3 Replies View RelatedUbuntu Installation :: Install Kde (not Kubuntu-desktop) In 9.10?
Jan 29, 2010want to ask how to install kde (not kubuntu-desktop) in ubuntu 9.10
View 6 Replies View Related