Ubuntu Installation :: Kubuntu 11.04 Installation: No LVM Partition Option?
Sep 1, 2011
I am coming from the Fedora world where everything is on one DVD and you just install it. I tried to install Kubuntu 11.04 using LVM, and I selected manual partitioning setup during the install, but there is no option for setting up LVM. Am I using the wrong version, i.e. it only works with the server edition? I saw somewhere that it may magically become available in expert mode...Is that true? Somewhere else it recommends using the alternate CD?Also, maybe I am attacking this the wrong way. I want to set up a server with KDE, so what is the best method:1) Install plain ubuntu, then add KDE + any server programs.2) Install Kubuntu, then add any server programs.
View 2 Replies
ADVERTISEMENT
Jun 7, 2010
I am trying to install Ubuntu 10.04 LTS on a Windows XP Media Centre Edition system.On the Step 4 of the installation which usually gives you the option to partition the disk but it only gives me the option to Erase the entire disk or specify partition manually, although this also doesn't allow anything other than totally erasing the disk. I'd ideally like to keep my Windows and I have installed Ubuntu before (but 9.10) on a different system.
View 9 Replies
View Related
Feb 2, 2010
I'm trying to install Kubuntu from CD. On the 4-th step (Disk Setup) chose Manual. I have 4 partitions on my hd, but installer don't show me anything, except whole disk(sda)
View 2 Replies
View Related
Dec 2, 2010
I'm pretty new to linux and everything, and I was wonder how I could partition my hard drive on my laptop so that I don't loose any of my data and so that I can run Kubuntu along side of windows 7.
View 1 Replies
View Related
Oct 31, 2010
To be honest, I am trying to install Linux Mint, but since this is based on Ubuntu, and I am comfortable with Ubuntu on my VM I decided to label it Ubuntu.
I have a 235 HDD and it is partitioned like this:
C: 150 GB (Windows) NTFS
D: 70 GB (Data) NTFS
G: 15 GB (for my not yet installed Linux) NTFS
I also followed this tutorial and now I have some sort of LiveCD inside my USB: [URL]. So, now I have a pen drive with an Ubuntu LiveCD and a 15GB ready for my Ubuntu!
This is what I do:
1 - connect pen to computer
2 - turn on computer
3 - pen start running and I load Linux like a LiveCD (yey!)
4 - Linux loads and I wait
5 - I click "Install linux"
6 - I configure the language, time zone and keyboard with no problems
7 - Disk partitioning ... it offers me 2 choices:
7.1 - Erase entire disk and install Ubuntu
7.2 - Manually partitioning: but drive C:, D: and G: do not appear!!!
I want to install my Linux on driver G:, but I don't find a "Install Linux in this specific partition" option!
View 9 Replies
View Related
Mar 27, 2010
I have finally decided to restore grub on my netbook after installing windows 7, and I can boot into UNR just fine but the Jolicloud option is now gone. How do I add it back to the GRUB menu.lst?
View 2 Replies
View Related
Jun 10, 2009
I guess this is the right forum category for this. Am using the preupgrade method to go from F10 to F11.Downloading packages now. Just wondering if anybody knows if Anaconda will give me options to set up separate (ext3) partition for boot? (Since current grub won't work in the new ext4 file system scheme.)
View 2 Replies
View Related
Apr 11, 2011
I've just installed Fedora 14 over an old Ubuntu (heron, I think). The old install used a single partition for both / and /home; and I wanted to try to avoid reinstalling /home if possible (but yes, I did back it up). I chose the anaconda option to shrink the old Ubuntu /, and created a new LVM for the Fedora /. This seemed to work perfectly. I mounted the old / on '/host' (an old naming habit), and then mounted individual home dirs into /home using autofs. All seemed fine. However, on my first reboot after the autofs mounts fsck failed. The current situation is as follows:
# fsck /dev/sda6
fsck from util-linux-ng 2.18
e2fsck 1.41.12 (17-May-2010)
The filesystem size (according to the superblock) is 15360000 blocks
The physical size of the device is 15359895 blocks
Either the superblock or the partition table is likely to be corrupt!
Abort<y>? yes
# dumpe2fs /dev/sda6 | grep 'Block count'
dumpe2fs 1.41.12 (17-May-2010)
Block count: 15360000
# dumpe2fs -o superblock=32768 /dev/sda6 | grep 'Block count'
dumpe2fs 1.41.12 (17-May-2010)
Block count: 15360000
Same thing for all the other backup superblocks I've tried.
# echo '15360000 4 * p' | dc
61440000
# fdisk -s /dev/sda6
61439583
Resize2fs tells me to run fsck, and complains of a short read if I try to force. Fsck seems to run fine if I say 'no' to the abort prompt, but doesn't change the problem. Filesystem is ext3. Started with debugfs. First used icheck and ncheck to work out which file(s) had been written to the non-existent blocks past the partition size. Fortunately, there was only one. Deleted that file (can restore it from backup later). Quit debugfs. Now resize2fs -p -f worked perfectly. fsck after resizing was clean. Reboot seems happy. As for the origin of the problem, I would guess there's a rounding bug in the code anaconda uses to shrink partitions.
View 1 Replies
View Related
May 20, 2010
Canon MX320, MX330, MX860 printer installation on Kubuntu Lucid 10.04 AMD64 bit. I am sure Ubuntu Lucid is similar. Once I upgraded to Lucid 10.04 AMD64 bit I found that getting a Canon Pixma MX printer installed was not going to be easy. So I thought it help others if I posted my experience here. To pull this off you will need both the Debian package, (.deb), and the source package from either
Canon Europe: [URL]... Or Canon Australia: [URL]... NOTE: The only reason to get the source is to access the ppd files. They are in the Debian package but it is a lot more work to walk newbies through unpacking the .deb. Since there are errors in the source code it makes impossible to compile a driver. Therefore, you will need to install the 32bit Debian package and force the architecture, then add the correct printer driver from the ppd file in the source package. While these instructions worked for me there are a few assumption I make which mat affect your outcome. My MX860 has a wireless network connection.
In other words I have no idea if this will or will not work on a USB attached printer. (If someone would be kind enough to post back if they get that configuration working that would be cool.) The other assumption is that the general reader is relatively new to Lunix and the command line interface. The commands were cut and pasted from my working kconsole, so they should work for anyone.Here we go:........
View 9 Replies
View Related
May 1, 2010
After the upgrade from 9.10 to 10.04 resulted in a black screen after reboot, I decided to don't waste more time, backed up my data and made a fresh installation.
First Issue [solved]: After I inserted the Kubuntu 10.04 Live-CD and started the system, I got to the CD's boot-mode selection menu. When I selected "Install Kubuntu", I got the Kubuntu bootscreen, but the system hang up then. I was able to solve this problem through pressing F6 in the boot-mode selection menu and setting "nomodeset". I also had to remove "quit splash" from the boot-entry line. Afterwards the installation process was fine.
Second Issue: I wanted to boot my new installated system, but, off course, got the blank screen again. So I edited the Grub-entry for recovery mode in the grubmenu (replaced "quit splash" with "nomodeset") and booted into recovery mode. I selected "netroot", and installed the proprietary nvidia-drivers with "apt-get install nvidia-current". Afterwards I ran "nvidia-xconfig" to generate the xorg.conf. To solve the blank screen issue, I edited the /boot/grub/grub.cfg the same way I described above and rebooted. Now I don't get a blank screen anymore, but I also don't get an XServer. The system boots now (off course without splash and "unquit"), but drops me into the tty1... When I type "sudo service kdm start", I get into KDM and can login, but I get many errors and crash-reports there. I also don't have any internet. I only have internet when booting in recovery mode and select "netroot".
I'm a bit surprised that Ubuntu released a LTS-Version that causes so much trouble (I've searched the forum and it seems that I'm not the only one with such big problems). Has Ubuntu droped support for NVidia-users?
View 9 Replies
View Related
Jul 18, 2010
when I go to download 11.3 I am presented with the installation medium for a DVD installation with a button that says download DVD. Should there be an option to download an ISO option for a CD installation on this page along with the DVD version? Some of our older machines can only read CD's with a max size of 500+ megs.
View 3 Replies
View Related
Dec 30, 2010
I have a MSI a6000 Laptop (that has given me a lot of problems installing Ubuntu.
I finally had to run Ubuntu from a CD in nomodeset
Then when I go to install Ubuntu the only options it gives (regarding my harddrive) are to format my whole hardrive or do the partitioning. I have seen screenshots though where there is a third option on the same page to install ubuntu alongside a prior OS and dual boot.
Does anyone know why the "install alongside a prior OS (dual boot)" option doesn't show up?
View 5 Replies
View Related
Jul 27, 2009
I have a brand new thinkpad X301 with 4GB of RAM and thinking of getting fedora 11 on it. The plan is to have it triple boot with vista/seven and hopefully OSx86. I am aware of the 4 primary partitions limit on an MBR disk. I was thinking of having a swap file instead of swap partition and not creating a boot partition as well. If I install the boot loader(GRUB?) on the root partition will I be able to boot it without any problems by using vista's boot loader?
Or Maybe I should install GRUB on the MBR and add all the other operating systems on it? Does anyone have any objections for not creating a swap partition or a boot partition? When comes to desktop environment I've been using KDE in the past, is there any major advantage of using Gnome over it? KDE seems to look really nice on fedora where Gnome is maybe more stable?
View 4 Replies
View Related
Feb 2, 2011
I'm trying to install from Ubuntu Live 10.10. The CD boots fine, but when I go to install, I do not see my (sata)HDD partitions listed; there is nothing listed.This effectively, I cannot install this Ubuntu 10.10 I'm installing on a stock Acer Aspire M50400.
View 9 Replies
View Related
Jan 17, 2009
I downloaded from [URL] files FC-6-i386-disc1.iso through FC-6-i386-disc5.iso from windows vista with get right. I checked the files with sha1sum.exe and the numbers are correct. I burned the cd's with roxio creator de. Then I go to the other computer and start the installation and at the beginning there is an option to test the cd's before installation proceeds. All cd's tests fail. So I would like to be sure: Have I been buying bad cd's? Note: I have tried 15 cd's, all failed.
View 14 Replies
View Related
Jun 14, 2011
I'm trying to copy kubuntu from a old disk to a partition on a new hard disk. I used the command:
cp -apx /mnt/source /mnt/dest
I also edited fstab and changed the uuid to the correct partition, rebuild grub, and rebooted. When booting the kubuntu in the new partition, the sysytem still refers to the old partition (which is much smaller). ie: df displays the old partition. Is there another config file that has to be edited?
View 1 Replies
View Related
Apr 5, 2011
I had my Laptop, a Dell Inspiron 1520, running Windows 7 and Windows XP - I had a few gigs of unallocated space, so I decided to install Kubuntu alongside it, worked fine no problem, with the exception of running out of space very quickly - I got fed up with it, and installed Kubuntu over the Windows XP partition (around 80gigs, and the first OS to be installed on the computer). After I installed it.
All was working perfectly until I rebooted to discover I am missing my Windows 7 boot option in GRUB, before I had to press Windows XP Embedded and it opened the boot dialog, but here I dont get the option, is there a GRUB 2 option I can change to allow it to show Windows 7? The Computer works perfectly, it's just the GRUB doesn't show Windows 7, and I'm hesitant to format its old partition and reinstall it due to the fact that it may over ride the grub and leave me without Kubuntu access?
View 1 Replies
View Related
Jan 2, 2010
I just installed kubuntu on my fakeraid system and need help adding it to grub. I need to find the partition it is on. fdisk -l craps on me because of fake raid and i need to know what version of the kernel was installed. (in other words what version does the live cd install?)
View 2 Replies
View Related
Jan 19, 2010
is there any way to upgrade my install of Ubuntu 9.10 to Kubuntu 9.10 and keep my files and settings?
View 3 Replies
View Related
Feb 4, 2010
Is there koffice 2.1.1 ppa for kubuntu 9.10?
View 1 Replies
View Related
Apr 26, 2010
I'm a Linux n00b and installed the 10.04 rc of Kubuntu on a second partition as a dual boot with XP.
Now I'm thinking I would rather have Ubuntu. What is the best way to switch over?
View 7 Replies
View Related
Jun 3, 2010
I have recently tried to migrate to kubuntu. I am reading manuals and studying the matter right now, trying to find help via googling and stuff, but for some (i suppose, trivial) matters i just cannot seem to get help and reading manuals leads me nowhere.I am sorry if my questions seem trivial or are answered in manpages or on this forum, i tried searching and didnt found...
1) how to correctly install something, for which a "Stable Source Release" is provided. Especially when options are to be set
2) how to get knowledge about what version of something (in this case, ntfs-3g) is installed in my system, and what kind of options were set when it was installed
3) what exactly happens when i type "make" withing a folder i just extracted my "stable source release" gzip to?
4) what exactly happens when i type "make install", how does it know where to put what files, make changes to my system etc...
5) how to undo what it (make install) has done (because i had already corrupted one installation of kubuntu by simply doing an unsuccessfull make install of an x-fi driver package and then an alsa package)
6) when i install something with "apt-get install <packagename>" does the downloading of "source stable" happens and "make install" is ran for me, or something else?
7) Do gui package managers just do the "apt-get install <package name> " for me when i check to install something or do they do something extra aside from that? Like synaptic?
8) when i install something with the same name, but different version, what happens? like if i do an "apt-get install XYZ" of version 2.0 when i already have XYZ of version 1.0 installed, will 1.0 get overwritten by 2.0 or will i have both installed in my system?
9) how do i know which "options" are used when i do apt-get install of a package? for example, if package says "build with this option to achieve this result" how do i know if this option is on or off or can i control it when i apt-get install this package?
10) if i installed something with "make install" - can i later uninstal if with apt-get uninstall package or i have to somehow manually remove files? what is the common procedure?
11) if i installed something with "make install" - can i later upgrade it with "apt-get"?
12) why i read in books, like for example here (http://rute.2038bug.com/index.html.gz), that i should partition my disk in multiple partitions:
- one for swap
- one for / file system
- one for /usr
- one for /tmp
- one for /var
- remaining space goes for /home
because then if one gets overflown, full or broken, it wont affect the others, and you can afford to loose some and it eases the recovery of system in case of a fault
but then, kubuntu installs itself just in two partitions, swap and the rest? Is multiple partitions scheme outdated or?
13) Why if i ctrl-alt-f1 out of my KDE and run kate (any gui program), it says "cannot connect to X server" while xserver is indeed running on my pc (otherwise how would kde work?)
14) what is under ctrl-alt-f12, f11 etc, it is a blank screen with a cursor in top-left
15) is there a way to set the vga mode for tty's that are accessible with ctrl+alt+f(1-6) to 80x50 (i prefer that over the 80x25 that is set by default there)
i've read that you could do that in lilo config files you just do vga=extended
but now kubuntu uses grub so... how do i do that?
16) i've read that "linux is good because you can shut down an app that hangs your pc by going to terminal and sending a kill signal, something you cannot do in windows because windows has no way to escape a frozen gui"
But when i had a way to test that in practice (today i tried some decoration scheme for my KDE and it froze my desktop) i found out i have a freaking lot of processes running (with ps -A) and.... well, what should i have done to unfreeze my desktop? And how do i know what exactly hangs my PC in order to terminate it? (like in windows - you very frequently have a nearly dead non-responding pc, but doing CtRL-ALT-DEL shows that "system idle" has about 3/4 of your processor time and there is no problem with memory consumtion either, yet system barely can respond to your input")
17) i've heard and read about "linux needs no reboot" but in practice, installing nvidia drivers requires reboot, for example. So, is it really true or there is a way to make those drivers go without rebooting, they just tell me to reboot because i'm considered a newbie who doesnt know that "linux does not need reboot"?
18) KDE is very annoyingly preventing me from doing anything in "LEAVE" menu without a 30second-confirmation box (shutting down in 30 s...)... and i dont seem to see any settings for that in the gui... same goes for asking me to close my tty's - can it do it by itself? what config file should i edit?
19) As i read, linux filesystem philosophy is that settings go into /etc and that everything is a file, so, in order to change anything in my system it boils down to editing a file. Now, why do the files are so scattered? For example, why does alsa config file live as a hidden file (starts with .) in my home, and a file to set up mounting behavior lies in /var/lib/polkit-1/localauthority/10-vendor.d/com.ubuntu.desktop.pkla or /usr/share/polkit-1/actions/org.freedesktop.udisks.policy.
Do only system apps like mount use /etc for their configs, and how do i generally know where to look if i want to change something (like in windows, i'd go look in the application path, in my user folder's corresponding folders - my documents, application data etc and in registry).
20) As i read, linux ideology is about program scattering istelf all over the file system. Countrary to windows where program occupies a folder in which it nests its own folder tree (like data, sound, themes), a linux is said to put binaries into /bin, configs into /etc and so on. What happens if programs are called the same or use same files? For example, if two people make a program with a same name or use same file (for example, alot of windows programs used to use settings.ini to store user settings, if that would be in a same folder...?) or make a same short name for their program (like a long program name abbreviated to three letters for simplicity, but what if two programs have same abbreviations?).
View 6 Replies
View Related
Jun 18, 2010
I am being told I need to upgrade from 8.04 to at least 9.10 on another linux forum. I like KDE 3.5 and I CANNOT STAND KDE 4 I tried it like 3 or 4 times and I cant stand it... I tried that TRITON or whatever it is with 10.04 with kde 3 but it kept messing up like I would go to install updates it would say 83 updates but it only installed 7 anyways I said no to that and went back to 8.04 and I got the /! icon blaring at me saying hey idiot upgrade to 9.10. I mean I am doing fine on 8.04 I mean I got the latest thunderbird and updated pidgin to 2.7 I mean everything is up to date so its like why give it up? I am scared to go to 9.10 cause 3.5 will be gone and I will be stuck with KDE 4.0 ( the 1st version ) and I dont want that I want 3.5.
View 2 Replies
View Related
Oct 17, 2010
Is Kubuntu 10.10 stable?? At the moment i'm using Kubuntu 10.04, should i upgrade to Kubuntu 10.10(Is it stable??)
View 4 Replies
View Related
Apr 11, 2011
I am trying to install Kubuntu but the computer won't start after installation is finished. I think it has something to do with the way Kubuntu names the hard drives which doesn't match the way Grub names them...being a noob I don't even know if that makes any sense, much less how to fix it. Here's what I know. I install Kubuntu to a 16MB SSD. That shows up as "sdc" during Kubuntu installation. I select "use whole disk". Installation goes thru, computer won't start
Now if I install Ubuntu to the same 16MB SSD, it shows up as "sda" during Ubuntu installation.Installation goes thru, Ubuntu boots perfectly.
View 2 Replies
View Related
Nov 16, 2010
I encrypt a partition using LUKS, and store personal data on this partition. Then create a user account that solely deals with this partition and insulated from the Internet. Normally for each boot I do not even need to mount the LUKS encrypted partition, and when I mount that partition under that special user account, I can make sure that the Internet is cut off. I'm going to do the alternate installation these days, could you provide a brief sketch regarding what steps I should go through to implement the above result?
View 2 Replies
View Related
Mar 23, 2010
I have 9.10 installed and working like a charm, due to the problems I had last time, I decided to leave an empty space to try and test upcoming editions, but I can't install it!
I get two error messages and can't get past the point of partition assignment.
Here's the screenshots. I'm trying to install on the free space.
View 3 Replies
View Related
Jan 29, 2010
want to ask how to install kde (not kubuntu-desktop) in ubuntu 9.10
View 6 Replies
View Related
Feb 10, 2010
I am a n00b to Ubuntu, been using it under dual boot with Windoze for about a year, and have found this forum to be a great help - so I am hoping someone can help me out with this "mystery".I wanted to try out the Kubuntu live CD in order to see if I'd like KDE interface better (I used some SuSE 11.2 lately and liked it).I did whatever I do with Ubuntu (under my Win7 environment) - downloaded the iso (x64)- burned it to a CD usinf imgBurner- checked the CD - seemed active enough, Windows installer popped up- rebooted the computerI got the usual language menu, chose English, got the usual "Try kubuntu without...", "install kubuntu"... menu and hit enter to Try and... nothing!? Every option I clicked responded with "nothing" except F keys, and "Boot from first hard disk".I tried a bunch of things - burning with CDBurnerXP, using it on another computer, downloading an iso from a different mirror
View 6 Replies
View Related
Feb 18, 2010
how can i install XMMS. I know almost nothing so can you be specific about the everything.
View 1 Replies
View Related
