Ubuntu Installation :: Show The Option To Format The Drive Or "do Something Else"
May 27, 2011
Im trying to install ubuntu with windows xp, but I only have 1 disk. People at irc told me i Could make a new partition in this same disk without having to format the whole drive.. and this option should appear at the setup, but i dont have that option, it only show the option to format the drive or "do something else", And here i cant see anything that let me use the free space i have in the windows partition to make a new one...
my ntfs partition has at least 35gb contiguous free space of 200gb free so i thought i could use this to make a new partition, but idk how,
I used unetbootin to create my bootable usb with 10.10 for netbook. I am trying to install ubuntu on my brand new fresh out of the box Asus Eee PC 1018P but the problem is when I hit esc during the boot to get to bios to select boot from usb, the usb doesn't show up as an option. I also tried hitting f2 and making it an option to boot from usb but that doesn't seem to work either.
I've had two students report a problem whereby Ubuntu does not show up as a menu option in Grub. Both systems used Wubi installations of Ubuntu 10.04 Desktop for x86 on Windows XP. In both cases, Ubuntu completed the installation process. Upon reboot, we have the options to choose between Windows XP and Ubuntu. However, once we enter into Grub, only the Windows XP option shows.
I have a 4 GB usb pen drive, but I am unable to format it. Even if I delete some files and eject it , I am getting back the same files again? Guide me any cmds or any software to forcibly format my pen drive?
Upgraded one box that has 2 drives in it to 10.04 no problem.Tried doing my other box today, and it won't give me the option to format the /dev/sda drive (first drive), only gives me /dev/sdb as an option./dev/sdb is my media drive. /dev/sda is where the previous version of Ubuntu was installed and I need to be able to install to that drive.When I boot the live cd instead of installing, I see both drives under the "Places" menu, so I know ubuntu sees both drives.
dont get me wrong i am happy with my Ubuntu until i want to use the usb maker thing.. i got netbook remix and now i want to install it.. i use one of my usb drives.. BUT.. ubuntu usbmaker dont let me formate it.. i have used gparted, yes with ntfstools and tried formate it in every possible way with and without flags and **** and usbmaker dont seem to accept it however.. the usbmaker cant do ****.. it tells me it cant use the stick** and then gives me everything from 1 - 2 partitions.. i have backtracked this problem as far as i can it i dont get it..unetbootin makes it work great! but why shold i have to go so far as unetbootin to get things done? is usbmaker the most unuseless pice of software or what.. ?
i am running xubuntu 9.10 and can't format any usb drive (tried few of them). The same issue i had with fluxbox mint 8 (based on ubuntu 9.10) I thought that my usb drives are dead, but after formatting it in windows xp, i could run from them any linux distro. I installed then mint xfce 6 (ithink based on 8.10) and crunchbang based on 9.04, and had no such issues. But now i am back on Xubuntu 9.10 and want to make all live usb within it. At the end of formating process i have message something like: cannot mount usb drive: The enclosing drive for the volume is locked. Of course, no drive is locked. After that i can start making installation usb disk, but after some percentage it reports some error, and of course, it does not work.
An upgrade %100 pwnd my system: I performed an upgrade to Lucid from Karmic and I lost my keyboard input and sound etc etc etc. I then made a Karmic boot-run/install CD, & a USB startup stick. I then backed up my important information on flashdrives etc. At this point in time I have 2 partitions one with my old user account & info on it, and the other as a new (re)installed Karmic partition. My question is: What is the procedure for:
a) formatting the drive, b) not keeping the 2 partitions, and c) re-installing Ubuntu (karmic) back onto it?
I have GParted ( but I can't see how to use it to format ), and I have no clue how to format the Drive from either within the GUI or at the command-line. How do I format & re-install Ubuntu? What is the sequence or steps? I can probably do the re-install intuitively but I'm concerned there may be Ubuntu tricks I don't know about! Also- does this 2 partition thing cause any complications to formatting?? So honestly my question is simply how to format the drive from within the system.
I have a PC with really low specs ( it's a back up computer) that's running puppy linux but I don't really like it. It's hard to navigate/get things you could easily do on Windows Xp done, it's menus are crowded and well it can't even shut off properly which is a shame. I've had it on for only a week.
Anyways, I've downnloaded the Xubuntu . Iso and burnt it at 1x speed. I pop it in and it does take a long time to go through the install. ( I'm not sure if it's because of the disc read speed or because of the memory and what not) I chose the option to delete everything and install Xubuntu. It works and then I get a couple of error message and then the last one says something like " Can not format sda1" or something like that.
I am excited to install linux on my macbook air and have been trying to boot with a kingston 4gb usb drive but when I try to boot with it (holding down the option key on reboot) only the Hard drive shows up for me to boot up on.. not the usb drive.. how do I format the usb drive to be bootable in this case?
I am trying to install ubuntu on a separate hard drive than the one I have windows 7 installed on. I have two 500 gb hard drives in my computer; one I only want to use for windows, and the other only for linux. The hard drive that I am not using yet (the linux one), for some reason, has a 100mb "system restore" partition on it, which i do not want on there...but when I try to format the drive in gparted, it says "cannot format drive, daemon inhibited". I also tried in fedora 14's disk utility, same error and message, and in windows partitioning utility, it tells me it cannot format this drive.
Upon installation of Ubuntu a while back, i was using a windows xp machine with two different harddrives. Instead of formatting the xp drive and installing Linux, i decided to install Linux on the secondary harddrive. This worked all fine and dandy until recent, when I have found my linux drive filling up near capacity. I would like to format the XP harddrive and mount it in linux to give some more disk space. The problem i have found, is that the XP drive is the drive with GRUB.
I have installed UBUNTU inside my Windows XP. But the Windows is now corrupt and i want to format the windows drive. Is there any way that i can format the drive in which windows is present without effecting UBUNTU.Note:- Windows and UBUNTU are on different drives.
I need some assistance in trying to format a USB hard drive to vfat format but can't seem to do so. I am currently using RHEL 5.3. I have tried the following commands and they all come back as "command not found"
I have a Sony VAIO AR series, it contains two separate 120GB hard drives that were originally configured in a raid. They're called hd0, and hd1. I disabled the raid and partitioned hd1 in 3 ways, one medium sized partition for the operating system (ext4), one large partition for storage (ext4) and one small partition for Swap space. I then installed Ubuntu onto hd1 with help from UNetbootin. After installation went fine I loaded up Windows installer, created two NTFS partitions, one medium and one large, and installed Windows 7 of the medium sized partition. Now I can't figure out how to boot into the Ubuntu side on hd1. Needless to say, in Windows, hd1 is not visable at all. I can see my two NTFS partitions fine.
When booting up I go through two main screens. The first screen "Matrix Storage Manager Option ROM," lists the physical disks (0, and 1.) and gives me the option to enter configuration with [cntrl+i]. The second screen gives me a list of options to boot from, Yet they are all Windows options and many are redundant. The list includes "Enter Command Line," which when selected tells me "Boot failed! Press any key to enter command line." command line brings me to "grub>" I tried booting Ubuntu from this command line, but don't have much to work with here. I followed this guide, but it didn't take me to completion and I'm not sure where to go from here. http://www.mepis.org/docs/en/index.p...m_command_line
I can't finish installing Ubuntu 10.04. I have a Corsair Nova 128 GB solid state drive, the 128 GB model of this series, to be precise. I have an ASUS P5N-T Deluxe motherboard. It has a six xSATA 3 Gb/s ports NVIDIA MediaShield RAID controlelr on it. In Disk Utility, it shows up as nVidia Corporation MCP55 SATA Controller, using the sata_nv driver. I have the 128 GB drive plugged into one of these ports. I have disabled RAID completely in the BIOS.
When I boot the Live CD and run GParted, the drive shows up fine. I've got a 70.81 GiB NTFS partition (Windows 7), a 4.00 GiB swap partition, and a 44.43 GiB ext4 partition, onto which I had planned to install Ubuntu 10.04. I created the swap and ext4 partitions earlier, but at one point, that was unpartitioned space.
The problem is that when I run the Install app to install Ubuntu 10.04 on my SSD, when I get to step 4 of 8 (Prepare partitions), exactly zero drives show up. A while ago, I had a couple of Seagate 1.5 TB mirrored drives plugged into two of the ports, and they showed up fine, but no 128 GB SSD. In trying to troubleshoot this problem, I unplugged those and just left the SSD, and zero drives showed up. I disabled RAID in the BIOS, and it still doesn't show up. I moved the SSD from the port it was plugged into and plugged it into one of the ports that one of the 1.5 TB drives was plugged into. It still doesn't show up.
Nuts and bolts of it: Seagate 1.5 TB drive plugged into port: no problem. Corsair Nova 128 GB SSD plugged into port: doesn't show up. But again, only in the Install utility. In Disk Utility under SATA Host Adapter/MCP55 SATA Controller, I see 128 GB Solid-State Disk/ATA Corsair CSSD-V128GB2 listed plain as day. In GParted, I see a 119.24 GiB /dev/sda device with the partitions I've created on it plain as day. I can pull up a terminal and mount /dev/sda3 /mnt/ssd without any problem and access files on it. But for whatever reasons, the Install program and only the Install program can't see it. I'm dead in the water. Obviously, I can't use Ubuntu if I can't install it. What can I do to get this disk drive detected?
Install of 10.4 64 bit not showing choice of sata drives on install. W 7 on sata a drive, SUSE 11 on sata b drive. Need to load Ubuntu 10.4 on drive b, but not given choice of drives on the install. Only "clear drive" listed on the install window. This is not the case on 32 bit, a graph with drives listed. W7 a runs Adobe CS5, the Ubuntu 10.4 has excellent font, type display on the live cd.
I would like to disable the option to format a hard drive on the drop down menu in computer. The reason being is that it is too close to the safely remove hardware option. I have one drive with about 15 years of stuff on it that I just use as a backup, and I don't want to accidentally hit the wrong button. What I was thinking of doing is going to that section of code and commenting that line out (that way I can just uncomment it if I want to format with the GUI tool). where can I find the code for that module?
i downloaded the gnome 3 based on fedora from www.gnome3.org. But when i run the image i dont see an option to install to my harddrive it just runs from my cd rom drive. Can any please lead me with instructions as to where and how i can install it to my harddrive.
I have a 160Gig and a 40 Gig drive.I would like to install the system on the 160 Gig, and use the 40 Gig drive as a storage for backups or whatever.It appears in the installation process that I am required to use a mount point, which would then turn the drive over to the root system, which would not allow it to be totally available to me.I just want to format it to ext3 filing system.Coffeecat, if you are out there and see this, strange things are happening to the 40 Gig drive - it says it is using 2 gig, but it is totally empty of all system files, hidden files, trash, etc. and it is being imaged in the media folder in root. I believe I have messed this install up to the point of no return and think I should go ahead and start over.
I have a Live install of ubuntu 10.04 on a USB drive which is really handy. I've changed some things around so it's just how I like it.However, if for example I'm using a computer running windows, and I plug this USB stick in, a popup appears asking me if I want to reformat the drive. I'd much rather not have this appear because an accidental misclick would make me have to do all the work of reinstalling/customizing my USB.
I know how to turn of the popup for a particular machine, but I was wondering if it's possible to deny permissions to format the USB if it's plugged into any computer. Best case scenario would be if you were to plug the usb into any computer and click 'format' you would get a message prompting for a password first (not the one for the computer, one relative to the USB) or something like that.
I've just installed a second hard drive in my laptop with windows 7 on one drive and Ubuntu on the other. I selected the side-by-side install in the Ubuntu install and let Ubuntu do the rest. Unfortunately Grub isn't seeing the windows install even after reconfiguring grub. However, the windows 7 drive is visible in Ubuntu and all the windows files are there intact.
Does anyone know how I can make grub see Windows 7 so I can boot into it?
I have a limited bandwidth and I want to download all 4 DVDs of debian 4.0r6 in a compressed format (something like bzip2, tar, ...) that contains the ISO files? Any site that distributes debian in this way?
I am getting a new 4kb sector HDD for my laptop, WD scorpio black 750gb, I would like to image existing partitions on 512bytes sector HDD and move them to the new 4kb sector HDD, what's the best way to do this.
present config is as follows:
Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes
[Code].....
I am planning to keep the same three partitions as the primary partitions on the new drive and add few more logical partitions. I would have liked to move to GPT but since I need Win 7, I am stuck with MBR partiotion table.
Now, I understand how to partition an Advanced format disk, what I want to know is how to move the existing partitions on the 80 Gb disk to the new disk?
I use Clonezilla to copy partitions but it is not compatible unless both the target and the source disks are already using 4096 sector size.
I can use Acronis True Image WD Edition to clone Win 7 but how do I clone Ubuntu?
Also my Laptop's chipset is limited to SATA 1.5, will it cause any issues, I know the bandwidth is not an issue.
I'm running rsync and outputting the log to a file using --log-file option. I am also using the --link-dest option, which in turn is adding the hard link creation output for EVERY file in the log file. I want to ONLY show the actual file transfer (if any) that take place.
In the 'log format' section of rsyncd man page here I assume you can do this, I just can't make sence about the code. If someone has better experience with reading it, can you please assist ?
When using the Yast partitioner to partition a USB stick, I noticed there was no option for the ntfs format, but has the fat option. Is this a missing functionality/lib or by design? I have all of the ntfs stuff installed. I used to use gparted for this, but decided to make my self use the Yast tools. I like to keep them in ntfs format to get around the 4GB data transfer limit and have them readable by Linux and Windows.
I just discovered that you can automount an ext4 filesystem with acl enabled by running "tune2fs -o acl". (I knew about tune2fs but did not dare to use it until now). However, the acl mount option does not show up in /etc/mtab and /proc/mounts. Can I ignore this, or is there a way of telling the system about the actual mount options?
Edit: I can do "tune2fs -l <device> | grep acl | awk '{print $4}'" and if that isn't empty I can update /etc/mtab with "mount -f -o remount,acl <device>", but like the udev rule I previously messed with this seems lumberingly unelegant to me.
