Ubuntu Installation :: SSD Drive Not Detected - Zero Drives Show Up
May 15, 2010
I can't finish installing Ubuntu 10.04. I have a Corsair Nova 128 GB solid state drive, the 128 GB model of this series, to be precise. I have an ASUS P5N-T Deluxe motherboard. It has a six xSATA 3 Gb/s ports NVIDIA MediaShield RAID controlelr on it. In Disk Utility, it shows up as nVidia Corporation MCP55 SATA Controller, using the sata_nv driver. I have the 128 GB drive plugged into one of these ports. I have disabled RAID completely in the BIOS.
When I boot the Live CD and run GParted, the drive shows up fine. I've got a 70.81 GiB NTFS partition (Windows 7), a 4.00 GiB swap partition, and a 44.43 GiB ext4 partition, onto which I had planned to install Ubuntu 10.04. I created the swap and ext4 partitions earlier, but at one point, that was unpartitioned space.
The problem is that when I run the Install app to install Ubuntu 10.04 on my SSD, when I get to step 4 of 8 (Prepare partitions), exactly zero drives show up. A while ago, I had a couple of Seagate 1.5 TB mirrored drives plugged into two of the ports, and they showed up fine, but no 128 GB SSD. In trying to troubleshoot this problem, I unplugged those and just left the SSD, and zero drives showed up. I disabled RAID in the BIOS, and it still doesn't show up. I moved the SSD from the port it was plugged into and plugged it into one of the ports that one of the 1.5 TB drives was plugged into. It still doesn't show up.
Nuts and bolts of it: Seagate 1.5 TB drive plugged into port: no problem. Corsair Nova 128 GB SSD plugged into port: doesn't show up. But again, only in the Install utility. In Disk Utility under SATA Host Adapter/MCP55 SATA Controller, I see 128 GB Solid-State Disk/ATA Corsair CSSD-V128GB2 listed plain as day. In GParted, I see a 119.24 GiB /dev/sda device with the partitions I've created on it plain as day. I can pull up a terminal and mount /dev/sda3 /mnt/ssd without any problem and access files on it. But for whatever reasons, the Install program and only the Install program can't see it. I'm dead in the water. Obviously, I can't use Ubuntu if I can't install it. What can I do to get this disk drive detected?
[Code]....
View 2 Replies
ADVERTISEMENT
Apr 16, 2010
I'm trying to install 10.04b2 x64 on my new rig and for some reason the live cd can't detect both of my 1TB Sata 3 drives. There is no Raid and the bios has them flagged as IDE. I have also tried adding pci=nomsi to the boot string to no avail.
View 8 Replies
View Related
Jul 20, 2010
I am installing Ubuntu 10.04 on my new Mac Mini. It has 2 500GB hard-drives, and I have created a partition for Ubuntu. During installation, however, Ubuntu is not able to detect my disk drive, neither my network interface. So I am not able to 'Partition Disks' which is part of Ubuntu installation. Did any of you encounter this problem? Any solutions or workarounds? Should I setup my disks in anyway before installation or use boot args?
View 2 Replies
View Related
Jun 3, 2010
We are try to install Fedora 12 or Fedora 13 x86_64 on HP Server Blade ProLiant BL460c G6. And when the installer try to find storage devices - it can not find any hard drivers. We are have message on screen - "Finding storage devices" and the installation process is not continue.... Fedora 10 and Fedora 11 x86_64 are installed very well. The device /dev/cciss/c0d0 is present in system and all it partitions - c0d0p1, c0d0p2 ... Command fdisk -l /dev/cciss/c0d0 has no any output.
lsusb -v output:
0c:00.0 RAID bus controller: Hewlett-Packard Company Smart Array G6 controllers
(rev 01)
Subsystem: Hewlett-Packard Company Smart Array P410i
[code]....
View 1 Replies
View Related
Sep 16, 2009
OK, I obviously did something wrong, but I dont think I did because i checked my kickstart file after installing.
When i do a df -h it shows that drives i set to 4096MB and 6144MB when I just installed the server, are showing as 3.9GB and 5.9GB respectively.
This is my first Linux install, does it not do the # x 1024 for partition sizes?
View 12 Replies
View Related
Jul 29, 2010
My two 400G drives which have been added to a single 800G array (per fastbuild bios utility) still show up as two 400G drives in fdisk. Why is that?
View 1 Replies
View Related
Feb 11, 2011
After lot's of research i still can't find any solution to my problem, that's why i'm posting a message here.So, it's been few days now that i'm trying to install ubuntu 10.10, with the live CD, but each time when i must choose where to install it or how to make partition, it just tell me there is no hard drive..(i have two 1 TB sata hard drive )So i tried many things, GParted doesn't find my hard drive either, they appear in the bios (i can run windows), try to uninstall a raid program that might hide the hard drive, but it didn't work either.
So i came to see that i had Marvell 9123 which seems to be a SATA controller, and few people seems to have some similar issue with that Marvell stuff..I'm quite desperate now.. i tried to install ubuntu on a USB drive but my computer just doesn't boot on it (i tried this method for the sb drive URL...
View 9 Replies
View Related
Mar 14, 2010
I have Red hat Enterprise 5 , red hat 9 and a few other versions too . The issue is whenever i am trying to boot from it , it boots fine only to end up saying local cdrom not found do you want to specify your .. thing ! whereas all fedora disks are running perfectly without any problem .
View 2 Replies
View Related
Apr 8, 2010
try to install ubuntu 8.04 into ibm server x3200 m3, but fail. the process stop when no common cd-rom drive was detected. googling it and tried with: guide in [URL] but still not work, what else can be try to solve this problem?
View 6 Replies
View Related
Mar 16, 2011
The brand new MEMOREX 24X Lightscribe DVD player(SATA) is not detected by my UBUNTU 10.10 install (via USB stick LiveCD install). I know it should have worked out-of-the box, but it does not, dmesg or lshw command shows all other SATA connections ( 2 hard drives) , BUT the DVD Drive. The DVD drive is detected by the MSI BIOS, it is also fully functional in the dual-booted Windos 7 installation next to the Ubuntu 10.10, so I know the DVD player is ok. I have the latest B3 Stepping MSI P67A-GD65 motherboard with Intel i7 2600K cpu.
View 3 Replies
View Related
May 13, 2011
After many hours trying to install Ubuntu(netinstall-64bit) i can not find any solution to get it working. I set-up via KVM and virtual device. Installation gives me error "No disk drive detected" when trying to detect discs/hardware. Someone told me i have to load megasr-source_13.13.1021.2009-1_all.deb by virtual-usb. It should include drivers for the controller not delivered by ubuntu-setup. After that I got to next setup-step partitioning, but it only shows me an IPMI-device which is either the virtual usb or cd i suppose.
System is one week old and I got it with pre-installed debian64bit which is working fine. So i dont think its hardware causing this.
[Code]....
View 1 Replies
View Related
Dec 19, 2010
I am trying to install Ubuntu 10.10 on my AMD64 system. I am using the distribution ubuntu-10.10-dvd-AMD64.iso. The image was downloaded and burnedt into an installation DVD.
During installation system hangs with the following message on the screen:
No common CD-ROM drive was detected.
I tried "Alt-F2" to a console and typed: modprobe ide-scsi and get a message
Module ide_scsi not found.
I tried changing the BIOS for the SATA controller from RAID to IDE, didn't work.
The CD-ROM I am using is a hp BDDVDRW CH20L SCSI CDROM.
View 1 Replies
View Related
May 9, 2010
upgraded from karmic through update managerANDnone of of my external drives cd drive or flash drives are picked upad to go back to karmic and will remain there for a whil
View 9 Replies
View Related
Mar 12, 2011
I want to install Ubuntu 10.10 via a DVD-ROM but I faild. I got the message "no common cd-rom drive was detected." I have tried to install ubuntu 11.4 and failed too.
Hardware Setting:
DVD-ROM was attached to SATA 3.0 port.
SATA controller was set to IDE mode.
PCH is CougarPoint.
I use the same hardware setting to install Red Hat 6.0 and it works fine. I tried following boot option but in vain: noapic, acpi=off, nodmraid, all_generic_ide. It is ok to boot via a live usb but ubuntu 10.10 still can't find DVD-ROM. I have to use the hardware setting I descripted to install Ubuntu 10.10.
dmesg:
Code:
[ 1.892198] ata1: SATA max UDMA/133 cmd 0x3098 ctl 0x30ac bmdma 0x3070 irq 19
[ 3.309652] ata1.01: failed to resume link (SControl 0)
[ 3.469636] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[code]...
View 5 Replies
View Related
Jun 3, 2011
Is there any performance degradation or complications that arise from having Linux installed on a separate, physical hard disk from Windows in a dual-boot setup? I have a computer that I'd like to dual-boot Ubuntu and Windows but the current hard drive is quite fragmented and the Windows partitioner won't allow me to make a partition large enough to comfortably run Linux+several gigabytes of media that need to be stored. The rig, however, may have room for another internal drive, so I thought that having a separate physical disk reserved completely to Linux would be an easy solution. The tech guy at the local computer store suggested there might be difficulties with this configuration because one drive needs to be the "master" and the other a "slave", resulting in boot complications.
View 5 Replies
View Related
Dec 26, 2010
I installed Ubuntu 10.10 onto my laptop and got a new plug and play device that wasnt being read so I went to go and install windows onto my laptop and when I get to the screen to select my partition it says its unreadable or its not detected but when I restart it it works fine in loading ubuntu.
View 2 Replies
View Related
Oct 5, 2010
Install of 10.4 64 bit not showing choice of sata drives on install. W 7 on sata a drive, SUSE 11 on sata b drive. Need to load Ubuntu 10.4 on drive b, but not given choice of drives on the install. Only "clear drive" listed on the install window.
This is not the case on 32 bit, a graph with drives listed. W7 a runs Adobe CS5, the Ubuntu 10.4 has excellent font, type display on the live cd.
View 1 Replies
View Related
Jan 1, 2011
I have been running Ubuntu 9.04 for the past year. Tonight decided to upgrade to 9.10 thru update manager. Every thing regarding the install seemed fine until the request to restart the computer. I hit the restart and it will not boot up. Computer goes thru the normal restart screens.
Screen flashes with bios info--no hard drive detected, then proceeds to show booting from hd, then loads grub stage 1.5 (not grub 2)and screen goes blank.
View 6 Replies
View Related
Jan 6, 2010
am using the community build of Ubuntu 9.10, I have an old as dirt Power Macintosh G3 Blue And White, and I can't get it to install. I tried the live CD first of course, and now the alternate. Both tell me that no disk drives detected, even though Mac OS 9, X, and Fedora all detect both my 40gb seagate, my 120gb seagate, and my 120gb maxtor.I am trying to get this running with some sort of linux for a school project.What is happening is it asks me what driver to use, and if I select the bottom option that it is none of the above, it asks me to load a driver from a USB flash drive, which I don't know what driver to use. They are all standard IDE devices hooked into the built in bus. I obviously can't move past this point.
Specs:PowerPC G3 450mhz1gb of RAM120gb hard driveDVD-ROM driveZIP 250 drive (currently not hooked up)PCI ATI Rage 128 16mb video card (stock)Apple Fast ethernet 10/100 PCI card (machine has built in ethernet, but I am turning this machine into a hardware firewall, so a second NIC is required).Oh, I have used this machine perfectly with ubuntu before. When I first got it, I started out running Ubuntu 5.10 way back in 2005. I was thinking of downloading and burning 6.06, and upgrading from there.
View 9 Replies
View Related
Jan 1, 2010
I couldn't decide if this went in hardware or software, as it is both in a way. If I try to install 9.04 (I've been trying for a few months, and 9.10 is kind of slow) it doesn't see my hard drive. It's not even listed in the fstab! It's like it's invisible. However, If I install ubuntu 6.06 it can see it fine! This is a kernel problem, as it occurs with other flavours of linux as well, but openSolaris and any BSD See it just fine.
One other interesting factor is this: If I update to 8.10 LTS and choose the third kernel on the list, it runs fine! There is another snag though. In that kernel of 8.10 it can't see my keyboard, unless I bring up a terminal!
The preferred solution would be this. Find a way to make it work, possibly incorporating it into the kernel. Also, It's not a bad disc. I used the same one for two other pcs, and there were no issues whatsoever.
View 14 Replies
View Related
Jan 23, 2011
I've just installed a second hard drive in my laptop with windows 7 on one drive and Ubuntu on the other. I selected the side-by-side install in the Ubuntu install and let Ubuntu do the rest. Unfortunately Grub isn't seeing the windows install even after reconfiguring grub. However, the windows 7 drive is visible in Ubuntu and all the windows files are there intact.
Does anyone know how I can make grub see Windows 7 so I can boot into it?
View 5 Replies
View Related
Feb 1, 2015
I'm having problem in installing debian 7.5.0 on Dell Power Edge R 470 1U Rack Server ( Not Sure If am using RAID 1 ) whereby the hard drive is not detected. This server is running 2 Proc/2x1.2 SAS HDD . The installation went ok until i reached into partition section whereby the drives is not there to be selected , throwing an error " No disk drive detected , Driver needed fro your disk drive "
I've tried to use debian-7.8.0-amd64-DVD-1.iso
My server details:
Dell Power Edge R 470
32GB RAM
2 x 1.2 TB SAS HDD
View 4 Replies
View Related
Oct 1, 2010
I'm thinking of getting a forensic bridge to help with fixing machines and I was wondering if the support was good for Firewire and if so do they show up in /dev like hda and sda do so I can keep using my normal set of tools.
View 2 Replies
View Related
Oct 16, 2010
For quite a while I didn't have any problems and everything worked just fine, until I had to upgrade to KDE 4 from 3.5. And that, as you understand, required a major upgrade of quite a lot of stuff (not only the GUI, but also some of the system including the kernel). After I spent a while fixing up the mess (it works ok now, mostly), I still have quite a problem with optical drive and external disk detection.
Problem 1. DVD drive.
Sometimes it works fine without any errors - the system detects the drive and can write and read the mounted DVD (that's exactly how it was before the upgrade). And sometimes (or should I say most of the time?) there is no drive detected.
Problem 2. Flash drives.
I connect a flash-disk. It gets get detected, mounts automatically - yahoo! But.If I start the system with the drive already connected, then the device is not even recognized (doesn't appear in /dev). So I have to replug it.Used to work fine before.Something tells me that the problems have a common cause. Correct me if I am wrong. Please help!
View 2 Replies
View Related
Apr 10, 2011
To start with I know this is not a linux problem, it is purely hardware.After the computer has been on for a while and then restarted bios does not detect in POST the usb sticks that it is supposed to use to boot from. his is obviously a problem as bios can't use something it can't see to boot from.I'm wanting to know if anyone else has had a problem like this with my hardware? I suspect it is the Asus M4A78LT-M LE that has a usb detection problem, since I've tried plugging the same sticks in to another pc and they do not have the same issue on that pc.
root@dlnas:~# lshw
Code:
dlnas
[code]...
View 5 Replies
View Related
Jun 4, 2010
Just wondering if it is a distro thing or what.
I still can access them from the Places menu but how can I add them back to the desktop when I plug them in or pop in the disk?
View 3 Replies
View Related
Sep 10, 2010
Is it possible to show only mounted external volumes on the desktop. I try the method of uncheck /app/nautilus/desktop/volumes_visible. But it hides both internal and external disk.
View 6 Replies
View Related
Jan 6, 2010
I recently installed Fedora 12 for use with Amahi HDA. Before installing on the Hard drive I used the LIVE CD to test it out. While using the LIVE CD I could see all my HDD's. My file system, my 2nd Hard Drive, and my Raid 0 Configuration. (2 250GB drives) and could browse all my files on those drives.
After installing the full version on my hard drive, my RAID drives are showing up as seperate drives. I have a Asus P4P800 board using hte SATA raid. I know its FAKERaid and not a true hardware raid.
My goal is to restore the Raid in Fedora and make those drives active. However, i dont want to lose any of the data on those drives. To make sure I wasn't an idiot, i rebooted withthe LIVE CD again and verified that I could see the Raid Array.
View 3 Replies
View Related
Feb 23, 2009
I'm in rescue mode with Centos 5.2 disk trying to install/mount a new disk to extract data out from the failed server.
Plugged in a new SATA drive and syslog shows the drive being detected
SCSI device sdg: blah
sdg: Mode Sense: 00 3a 00 00
sdg: unknown partition table
sd 3:0:0:0: attached scsi disk sdg
However fdisk and mount does not find the drive. I tried echo "---" /sys/class/scsi_host/host3/scan based on one of the previous threads but get "write error: invalid argument".
how should I get the drive to be usable?
View 4 Replies
View Related
Jul 3, 2010
I have a Transcend 4GB USB flash drive that suddenly stopped working. However, when I insert it into the USB slot, the light on the drive glows, but I'm unable to mount the drive, neither does ubuntu detect it.I disconnected the flash drive, and then run `dmesg | tail`. The result was this :
[ 623.940610] scsi7 : SCSI emulation for USB Mass Storage devices
[ 623.940928] usb-storage: device found at 6
[ 623.940931] usb-storage: waiting for device to settle before scanning
[code]...
View 5 Replies
View Related
