Ubuntu Installation :: No Option To Install To First Drive?
May 2, 2010
Upgraded one box that has 2 drives in it to 10.04 no problem.Tried doing my other box today, and it won't give me the option to format the /dev/sda drive (first drive), only gives me /dev/sdb as an option./dev/sdb is my media drive. /dev/sda is where the previous version of Ubuntu was installed and I need to be able to install to that drive.When I boot the live cd instead of installing, I see both drives under the "Places" menu, so I know ubuntu sees both drives.
View 6 Replies
ADVERTISEMENT
Apr 12, 2011
i downloaded the gnome 3 based on fedora from www.gnome3.org. But when i run the image i dont see an option to install to my harddrive it just runs from my cd rom drive. Can any please lead me with instructions as to where and how i can install it to my harddrive.
View 8 Replies
View Related
Jul 18, 2010
when I go to download 11.3 I am presented with the installation medium for a DVD installation with a button that says download DVD. Should there be an option to download an ISO option for a CD installation on this page along with the DVD version? Some of our older machines can only read CD's with a max size of 500+ megs.
View 3 Replies
View Related
Jul 17, 2010
I have a Sony VAIO AR series, it contains two separate 120GB hard drives that were originally configured in a raid. They're called hd0, and hd1. I disabled the raid and partitioned hd1 in 3 ways, one medium sized partition for the operating system (ext4), one large partition for storage (ext4) and one small partition for Swap space. I then installed Ubuntu onto hd1 with help from UNetbootin. After installation went fine I loaded up Windows installer, created two NTFS partitions, one medium and one large, and installed Windows 7 of the medium sized partition. Now I can't figure out how to boot into the Ubuntu side on hd1. Needless to say, in Windows, hd1 is not visable at all. I can see my two NTFS partitions fine.
When booting up I go through two main screens. The first screen "Matrix Storage Manager Option ROM," lists the physical disks (0, and 1.) and gives me the option to enter configuration with [cntrl+i]. The second screen gives me a list of options to boot from, Yet they are all Windows options and many are redundant. The list includes "Enter Command Line," which when selected tells me "Boot failed! Press any key to enter command line." command line brings me to "grub>" I tried booting Ubuntu from this command line, but don't have much to work with here. I followed this guide, but it didn't take me to completion and I'm not sure where to go from here. http://www.mepis.org/docs/en/index.p...m_command_line
[Code]...
View 3 Replies
View Related
Aug 12, 2010
I have successfully setup a FOG server to image my Windows clients, so I have tftp, pxe and anything else related to booting to a pxe server setup and rocking. What I'm trying to do now, is use the CentOS net install files to setup CentOS on an old server with no USB boot option, and a broken scsi cdrom drive (it's a Dell PowerEdge 2400, with a single PIII 733 and 1.25GB ram).
Using the FOG Projects gparted wiki entry (adding gparted to the pxe boot menu) I was actually successfully able to pull the net install files over to the PE, and install CentOS 5.5 via local ftp server. At first it kept erroring out (I kept picking and choosing individual packages from the package groups), so I thought it may be an issue with the GUI install (the python script kept spitting back errors forcing a reboot). In any case, I finally got through the GUI install, but now I need / want to know how to force a text mode install.
[Code]....
the bolded "append" line is where I thought I could force the text mode install script, but that didn't work. The vmlinuz and initrd.img files were both pulled form the net install iso, NOT the livecd. Would that have made a difference? If not, what / where / how should I force the text mode install script?
View 4 Replies
View Related
Jul 16, 2011
I have a problem installing of centOS 5.6 from live CD.
I cannot see any option to install centOS 5.6 from live CD to hard drive on the desktop. Can anybody provide me with the steps for this.
View 6 Replies
View Related
May 27, 2011
Im trying to install ubuntu with windows xp, but I only have 1 disk. People at irc told me i Could make a new partition in this same disk without having to format the whole drive.. and this option should appear at the setup, but i dont have that option, it only show the option to format the drive or "do something else", And here i cant see anything that let me use the free space i have in the windows partition to make a new one...
my ntfs partition has at least 35gb contiguous free space of 200gb free so i thought i could use this to make a new partition, but idk how,
View 4 Replies
View Related
Jan 24, 2011
I have my machine booting Windows 7, Ubuntu 10.10 (64bit), and OpenSUSE 11.3 (64bit). All good. When I added OpenSUSE it was really easy.There is an option not to install grub. I ticked the box and once installed I simply re-booted into Ubuntu and 'sudo update-grub'. Voila, job done. (Interestingly it uses the same /swap as Ubuntu so that is convenient, an accident, long story, and off topic!) Is there a similar option in Ubuntu where during install I can choose not to install grub and use the same method as I did with OpenSUSE?
Also, I am wanting to use the existing Ubuntu /home and /swap partitions. How do I go about that? I will do some further research on that bit and no doubt find the answer but I'm figuring I create just one partition, /, during install and somehow direct it to use the existing /home and /swap. Issue is, won't it create a /home directory inside the / partition if I don't allocate a /home partition during install?
Reason I'm doing this? I have a Realtek wireless card that has never behaved. I ended up emailing Realtek only to discover the driver/firmware wasn't suitable for 64bit systems. Therefore I am going to attempt to install Ubuntu Desktop 10.10 32bit version and see if I can't get the card behaving there.
I had thought of Virtualbox for doing this (which I have installed but haven't used yet) but decided against it only to save time when booting. I would need to boot the 64bit Ubuntu then the 32bit Ubuntu inside that. Waste of ten seconds!
View 9 Replies
View Related
Mar 28, 2011
I installed 9.10, and then upgraded to grub2. This went without issue. I am now in the process of installing 10.10. I have the partitions set up as follows,
sda1 primary 8GB swap
sda5 logical 10gb / for 9.10
sda6 logical 20gb /home for 9.10
with grub2 installed on the mbr of sda. I then added
sda7 logical 10gb / for 10.10
sda8 logical 20gb /home for 10.10
This seems like the best config for a multiboot setup.I was not going to install grub with 10.10, but just boot back into 9.10 and run update-grub. The only options are to install grub on sda, or on one of the logical parts. There is no option in the menu to not install grub.what should I do now?
View 9 Replies
View Related
Nov 4, 2010
I am attempting to install Ubuntu via a USB stick. I have Ubuntu on the USB, I have booted from the stick and I have made it to the installing window. My problem is, I do not get the option to install next to other operating systems, which is what I want.If I have not been clear enough then please let me know and I'll see what I can do.
View 6 Replies
View Related
Dec 28, 2010
No option to install alongside another OS. I have Win7 Starter on this new netbook and need to install Ubuntu 10.10 netbook addition. Disk Management shows 4 partitions, one is C:, one is D:, and two I've never seen before they're so small. Is it safe to delete these or do they have a purpose for the current Win OS? I would gladly install the 10.10 to my D: drive which seems to be SDA2, the 131GB partition. What's the right sequence of partitioning and formatting to give Ubuntu the full install it needs manually? And what needs to be taken care of for a Swap drive?
View 9 Replies
View Related
Oct 14, 2010
I am installing ubuntu on a Dell m7750n machine that has the KSOD. I have done almost everything I can find to fix it. I was able to remove my data off of it using regedit....
So, I am sick of MS and found linux. I installed unbutu netbook on my netbook and it works like a charm.....
So, I went to install this on my desktop dell.... I have read of the many issue with this...
I was not able to boot from the CDlive as is. I kept getting a black screen with nothing. I then used the f6 to get into grub and then choose f6 to change the load options to load nomodeset and was able to load ubuntu from the drive, not install.
I would like to install ubuntu, but when I click on install from the 'tester' version it will not give me the option to install along side another OS (windows) that I see in the install ubuntu main website in the see how to do it.
I get two options:
Erase and use entire disk
Specify partitions manually (advanced)
Question: Can I install and select my own partitions using: [url]
Or, is there something wrong and I need to get that fixed before I install ubuntu?
Is this a DELL issue or KSOD issue?
View 9 Replies
View Related
May 13, 2011
In previous versions, there was an 'advanced' button where you could select NOT to install grub. I can't find that in the latest Natty release iso's. Is it no longer an option? And if not, WHY? I find myself reloading Natty quite often on a test partition to play with various parameters in my attempt to get it working as needed. But I'd really prefer to have the option to no reload grub.
View 9 Replies
View Related
Jul 15, 2010
I used Ubuntu customization kit to "build" my own Ubuntu. It works as a charm. Completely recommended.
I install that custom ubuntu 10.04 on a 2gb pendrive, using usb-creator-gtk and it worked also good.
The only thing is bodering me, is when I boot that pendrive, it appear a window asking if I want to install the OS or if I want to use it live.
How can I remove that window on boot?
I want to boot directly on desktop...that way will be perfect!
View 1 Replies
View Related
May 14, 2011
I have downloaded Kubuntu 11.04 Desktop ISO. When I fire up Wubi then there is no Install inside Windows option! Why?
View 4 Replies
View Related
Jan 31, 2009
probably did something stupid.. just haven't figured out what yet.. hope someone can point me in the right direction. daughters computer broke, maybe virus, so i did clean reinstall of xp. decided to give her a couple of linux distros, thinking maybe they are safer for when she is surfing..
Used gparted to repartition hd:
Partition table entries are not in disk order
Installed Ubuntu 8.04. was then able to boot into either ubuntu or xp. next installed fedora 10. new menu.lst did not show ubuntu, only fedora and xp. had some lockups in fedora, and had to pull plug to reboot 2 or 3 times. replaced power supply. added ubuntu into menu.lst. boots into fedora and ubuntu fine. tried to boot xp, and get "Preparing System Recovery Option", then PC Angel appears, and it wants me to use the system restore option for xp.
Is there something i can do to recover xp without having to wipe the hd and reinstall xp, then reinstall ubuntu and fedora (and if i do all that, how can i be sure i don't end up with the same problem?
View 2 Replies
View Related
Nov 21, 2010
I am trying to use a F14 network install CD to upgrade on an old HP Pavilion 9695C (Athalon 850MHz, nVidia NV5 RIVA TNT2/TNT2 Pro AGP) with F12 on it. This same disk successfully upgraded a HP Omnibook 6000 with F12. I boot with the network install CD and get the initial menu to select to install/upgrade, install using basic video driver, etc. After selecting either upgrade or basic video driver install, I see the CD being read, then nothing, just a blank screen. I had a similar problem with F12 network install on this machine. So I tried adding "vga=0x318 nomodeset" to the upgrade boot options. The only difference is a quick flash on the screen, then a blinking "underscore character" cursor. The "install using basic video driver" has the same result.
Have also tried:linux nofb
vga=791 [nomodeset]
vga=1 [nomodeset]
xdriver=nv nomodeset
xdriver=vesa nomodeset
However, I always end up with a blank screen or blank screen with blinking underscore cursor. I know this particular AGP has problems with the nouveau driver. On F12 I had to force it to use the nv driver. I submitted a bug but there was no interest on it as this was F12 and F13 was the latest at the time. I did try to upgrade to F13, but ran into this same problem. I was hoping F14 would be better.
View 11 Replies
View Related
Feb 8, 2010
I burned a live c.d of debian 6 today, it works really great but there is no option to install it. I've done lots of installs off c.ds where it says " install" right at boot up, as on option. is there a way to install this?
View 3 Replies
View Related
Jul 21, 2010
Got it on a CD and was using it as "Try Ubuntu" instead of installing it for good (I still wanted to see if there were memory issues or HDD issues with my desktop, before I installed it for good).Anyway, I would shut down the pc after about 2 or 3 days and redo the CD install (try ubuntu option) again and add all the plugins etc.Kids used this for playing some games on friv or nickjr.The real issue - of late, when I try to start the PC and boot from the CD, I am getting a LOGIN screen instead of the regular option to install from CD or Try the Ubuntu.
View 9 Replies
View Related
Jul 16, 2015
I got a Lenovo T430s and when I boot up the USB I am presented with different options like
install
install graphical
install 64
install 64 graphical
etc
When I pick one and hit Enter I am presented with a black screen.
View 6 Replies
View Related
Apr 11, 2011
I've just installed Fedora 14 over an old Ubuntu (heron, I think). The old install used a single partition for both / and /home; and I wanted to try to avoid reinstalling /home if possible (but yes, I did back it up). I chose the anaconda option to shrink the old Ubuntu /, and created a new LVM for the Fedora /. This seemed to work perfectly. I mounted the old / on '/host' (an old naming habit), and then mounted individual home dirs into /home using autofs. All seemed fine. However, on my first reboot after the autofs mounts fsck failed. The current situation is as follows:
# fsck /dev/sda6
fsck from util-linux-ng 2.18
e2fsck 1.41.12 (17-May-2010)
The filesystem size (according to the superblock) is 15360000 blocks
The physical size of the device is 15359895 blocks
Either the superblock or the partition table is likely to be corrupt!
Abort<y>? yes
# dumpe2fs /dev/sda6 | grep 'Block count'
dumpe2fs 1.41.12 (17-May-2010)
Block count: 15360000
# dumpe2fs -o superblock=32768 /dev/sda6 | grep 'Block count'
dumpe2fs 1.41.12 (17-May-2010)
Block count: 15360000
Same thing for all the other backup superblocks I've tried.
# echo '15360000 4 * p' | dc
61440000
# fdisk -s /dev/sda6
61439583
Resize2fs tells me to run fsck, and complains of a short read if I try to force. Fsck seems to run fine if I say 'no' to the abort prompt, but doesn't change the problem. Filesystem is ext3. Started with debugfs. First used icheck and ncheck to work out which file(s) had been written to the non-existent blocks past the partition size. Fortunately, there was only one. Deleted that file (can restore it from backup later). Quit debugfs. Now resize2fs -p -f worked perfectly. fsck after resizing was clean. Reboot seems happy. As for the origin of the problem, I would guess there's a rounding bug in the code anaconda uses to shrink partitions.
View 1 Replies
View Related
Dec 5, 2010
So I wanted to install ubuntu on my pc along with Windows XP (I also had vista, but it did not survive motherboard replacing I burned the LiveCD and booted from it. I chose to try ubuntu. After few minutes of playing with it I started the installer from the icon. I tried the "install alongside with other operating system" option, but I how could know what it will do? There is almost no information in that window. I have two 750GB hdds. sda with big partition over whole space and sdb with two partitions (Vista, and 40GB for Windows XP), but the installer shows only a small strip with ubuntu sign with no readable information! My sda has only 8GB of space free, so would it resize the partition to be 8GB smaller and make new partition for Linux there? On sdb it does not show my two partitions from some reason, but just one big labeled Windows 7 loader, so what would it do there? Delete the WinXP partition? Not a clue because there is no information visible in that supersmall strip with ubuntu sign on it. Just that there are some partitions hidden.
Mouseclick or mouseover do nothing. OK so I changed to the "manually specify partitions" mode to be sure what it does...And now what? I decided to shrink my WinXP partition and let the installer use the empty space, but what a surprise? It does not know what to do with! "No root file system is defined". OK so I fired up firefox and surfed a bit to know what partitions are needed. I then made ext4 partition and swap partition (not a clue how big they should be though : But there is again that message about no root filesystem! OMG so then I somehow figured out I have to assign a mount point / to it, but why there isn't any tip or info that this must be done remains a mystery for me. OK so the installation finally started and I thought that it will be OK at last. But guess what happens! No GRUB boot menu appeared but there was a blank screen for a strangely long time and then the computer rebooted again and then Windows XP started right away! WTH? I guess installer failed to change MBR or something.
OK so I booted from LiveCD again and now what... There are some guides from 2006 to be googled, but when I typed grub into a console it said it is not installed! This is great.Now I crossed a point where no BFU would ever dare to go I said to myself :- When I used the command to install grub it told me it will uninstall grub-pc package. What is grub-pc? Typing grub-pc does not do anything. Is it even possible to install something when running from a LiveCD? The crazy story does not end here. I thought that I will install it again and risk the first option "install alongside with other operating systems", if it will have any more luck with GRUB. So I did that on sdb and it took crazy long time.
I was so afraid what it was doing, but it was probably shrinking my big Vista partition.Then it was installed and what a surprise - I booted right into Windows XP again You probably think I am a masochist if I keep trying so many options desperately, but I frequently help my friends with pcs so I am glad I can test all options and be prepared for anything Now I reinstalled the system again while I was writing this and I will try to figure out how to fix that damn GRUB so I could boot into Linux
View 9 Replies
View Related
Oct 17, 2010
I have a IBM T30 with 40 GB HDD and an Win XP system installed. I have just deleted the partion with Ubuntu 8.04, which was installed alongside Win XP as dual boot. I can see on the internet [URL]... that I should be offered the option: - Install alongside other operating system However I am only offered: - Erase and use entire disc - Specify partitions manually (advanced) What is wrong?
View 1 Replies
View Related
Feb 25, 2010
since my computer don't support booting from USB, can we set it up in the menu.lst option so it will read?
View 1 Replies
View Related
Jul 27, 2011
I have a setup with 3 hard drives. The first hard drive has windows 7 and is a solid state, for my fast computing needs. The second hard drive has another copy of windows 7 on one partition and Ubuntu 11.04 on another (and SWAP space).The third hard drive is just storage.Grub is installed on the first(SSD) hard drive, as well as the MBR (master boot record) for the two windows installs (select win7 in grub, then it lets me select which windows install to boot).Now I want to get rid of my solid state drive, and just run from the second hard drive with dual boot.How can I install a new MBR on the second hard drive without having to re-install both OS's?I've tried removing the first hard drive and using bootrec.exe to re-write the MBR and it will not work.I can install grub, and it boots to ubuntu but when I try windows 7 it says there is no MBR.
View 9 Replies
View Related
Apr 21, 2011
I had to unmount a flash drive in GParted to format it, now I want to mount it again so I can use it, GParted does not get me a "mount" option and it does not automatically mount. How do I mount it so I can use it to make a Fedora Live USB? I am using Fedora 14 KDE BTW...
View 6 Replies
View Related
Dec 10, 2009
I don't have a working DVD burner. I'd like to transfer the FC12 install DVD image to a USB thumb drive, and install from there. Is that reasonably easy to do?ow would I transfer the .iso file for the install image to the USB thumb drive in such a way that I could boot from i
View 1 Replies
View Related
Mar 20, 2011
right now, my machine runs ubuntu 10.10 due to work issue, i need to use windows server 2008 R2 (its a windows exclusive company) but i never used any of the active directory or anything from the windows server (only experience with windows is visual studio and those GAMES!), so i figure i need to practice a bit on my own b4 starting the job and just at the same time I found out as a univ student i get it for free! And plus, I am finding opensuse a better option for me than ubuntu So im wondering what i should do regarding these 2 systems here s some option
1). Install openSuse 11.4, and install VirtualBox and use windows server 2008 R2 on vbox
2). Install windows server 2008 R2 and then install openSuse alongside with it
3). Install windows server 2008 R2 and install openSuse in virtualBox
I have been using linux as my primary OS for more than a year now and I rlly need it for both school and my own entertainment. So wondering which option would best work out for me
wat are your opinions? PS: my machine is about 2 years ago a Dell laptop, with core 2 duo p8700 (2.53ghz) 4GB ram, and nvidia gfx, which even tho is still fast, but isnt rlly that snappy when it comes to virtualization even running xp in a virtual machine is quite laggy at times :S
View 7 Replies
View Related
Feb 12, 2011
I get this option if I right click on /dev/sda1. And why is there a triangle icon with an exclamation mark next to it.
View 5 Replies
View Related
Feb 5, 2010
I am helping my pal to get into Debian (yes first timer).He is running W7 on a 500G SATA HDD and he has another 250G SATA HDD that he wants Debian to go to.Will Debian install grub on the master bootloader even if the installation is going on a separate hard drive?I have dual boot before but on the same hard drive.
View 6 Replies
View Related
