Ubuntu Installation :: Windows - Dual Boot / Default Time Limit?
Mar 23, 2011
I was struggling how to phrase the question (in the subject) so let me clarify... I wish to install Windows 2000 and then do Ubuntu, on the same PC. I never had a dual boot before but I understand that it goes automatically (after a short time) to default Windows if Ubuntu is not chosen (on the boot up screen), correct? If so, if there's a "countdown" of sorts, is there a way to disable it? I wish to have control over that aspect, have unlimited time during that boot "choose one" screen.
View 7 Replies
ADVERTISEMENT
Jul 30, 2010
I had to boot into my Windows 7 install on my laptop for the first time in a few months and I noticed that the Windows clock was 4 hours ahead. Windows sync'd its time with the internet, then I booted back into Debian (Lenny) and my clock was now 4 hours behind. Both OS's are set to the same time zone (EDT). The minutes were correct in both systems. Could the fact that EDT is UTC-0400 be relevant?
View 7 Replies
View Related
Mar 31, 2010
I installed Windows XP Pro and RedHat Linux Enterprise 5 on my PC for my purpose. The PC is used by other family members too and they need only Windows OS for browsing. It is becoming problem for them to reboot after the PC enters into Linux by default. I am still learning Linux and I want to edit the /boot/grub.conf file to make Windows as default OS to boot. The following is the content of my grub.conf file (FYI):
#boot=/dev/sda
default=0
timeout=10
splashimage=(hd0,5)/grub/splash.xpm.gz
[code]....
View 4 Replies
View Related
Oct 3, 2010
I've installed Windows 7 Ultimate on a notebook which previously ran Vista. No problems there.I've now installed Ubuntu (now updated to 10.04)so that it can boot to either OS.
It all works fine and when I first power up, I get a screen which invites me to select the OS I want to use. There are however two problems:
1) it defaults to Ubuntu (whereas I would prefer it to default to Windows 7 (it's a work laptop and most of the applications are Windows-specific),
2) the list of choices is getting increasingly complex with an expanding list of choices (with each major update of Ubuntu adding more); it even seems to include an option to go back to Vista!As long as I move down the list and make the right selection quite speedily, I get to where I want to be (though, as I say, I would like to change the default option).Is there any way I can edit/shorten this list without damaging the functionality and how can I change that default?
View 9 Replies
View Related
May 23, 2011
I am thinking about installing Ubuntu dualboot with Windows 7. However, I feel that it'd be a pain to select Windows 7 constantly as it is my main OS for work and school. Ubuntu would be for offtime tinkering and as such probably booted once or twice a week at most. I intend to use the system to use the OS not to use it for serious work. Before I install would it be possible to install it in Dualboot while maintaining the ability to boot W7 by default unless pressing a special key to come to the Grub bootloader or something like that.
View 1 Replies
View Related
Apr 23, 2010
how much disk space a non manual dual boot uses? I've always been guided by a person knowing much about linux when doing my dual boot (and been guided to do the partitions manualy), but this person is not there for the moment and I need to do a dual boot on my son's computer. Since he'll need his Windows computer mainly for games I wouldn't want Ubuntu to take 2/3 of his disk space (which is about 250 Gb I think, let's say 50 Gb would be perfect for the Ubuntu)
And I'm not sure how I could change this later, cause in my own computer I cannot find how to resize (I cannot unmount neither resize the partitions I have) I don't mean I need to do this on my computer but I mean I wouldn't want to try out anything if I'm not sure it be could restored in 1,2,3. And partitions is such a thing. If I remember correctly I've done dual boot by default (i mean without doing the partitions manualy) and it does about 50/50 ?
View 2 Replies
View Related
May 7, 2010
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
View 3 Replies
View Related
Mar 27, 2009
I have installed Fedora10 on my PC which had an XP. Now Fedora waits just 2-3 seconds to press any key to choose between XP and Fedora. Actually if I don't press any key it automatically begins Fedora. How can I increase this time interval?
View 3 Replies
View Related
Apr 30, 2010
I just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.
View 9 Replies
View Related
Mar 23, 2010
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies
View Related
Jul 8, 2010
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
View 1 Replies
View Related
Jul 18, 2010
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
View 2 Replies
View Related
May 7, 2010
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
View 1 Replies
View Related
Nov 8, 2010
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
View 8 Replies
View Related
Jan 5, 2011
if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies
View Related
Oct 19, 2010
I am trying to install Ubuntu on a machine that already has Windows 7 on one partition. Obviously I intend to install it on the other free partition. So I downloaded the iso burnt it onto the disk and pop in the disk and the boot the machine. The installation screen comes up I selected the first option (Try Ubuntu without installation), I just see a prompt after a few seconds and then the screen goes blank and nothing happens. Unable to detect a signal, The monitor goes into standby. The same thing happens if I use "install Ubuntu" option as well. I downloaded minimal install version Ubuntu and tried to install with that. since its old school installation, the installation completed without any errors, but when I restart the grub come up and when I select to boot into Ubuntu, I see the same behavior i.e. the screen goes blank and never boots to anything. This is a machine on which I was using 10.4 until yesterday.
View 1 Replies
View Related
May 14, 2010
I just got a Toshiba Mini NB305-310 and tried to install Ubuntu 10.04 on it using the .iso file on a flash drive. When I try to boot into Windows XP, the loading screen comes up for a second, flashes blue, then restarts the computer. I'm able to boot up in Ubuntu, but it takes a LONG time with the screen black before it goes to the Ubuntu loading screen. I saw in an earlier post that it's helpful to post the output of the Boot Info Script, so I've posted it below. I'm new to the forums, so if I'm doing anything wrong, please let me know:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
[code].....
View 9 Replies
View Related
Oct 28, 2010
I am trying to run a dual boot system with Windows 7 and an Ubuntu 9.10 installation from a live CD. I am running this on a Dell Inspiron M5030. Both operating systems have installed fine however whenever I run Windows the computer subsequently fails to run Grub upon rebooting and gives the following error message:
Grub loading
the symbol 'ob_bioslgrub?+E?U? Not found
Aborted press any key to exit
The unrecognised symbols are different each time. I have also had (' ') and ('ee*??S ') and ('un'). I cured this initially by reinstalling Ubuntu but after looking at the support documentation have now found that I can cure it temporarily by simply reinstalling Grub using the command:
sudo grub-setup -d /media/dd5d6cd6-cb80-40e0-baf3-13ae1ebe17a4/boot/grub -m /media/dd5d6cd6-cb80-40e0-baf3-13ae1ebe17a4/boot/grub/device.map /dev/sda
I can then run Ubuntu fine, however upon running Windows again the problem reoccurs and Grub will not run.
View 9 Replies
View Related
Jan 10, 2010
I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
View 7 Replies
View Related
Feb 12, 2010
I want to change my default boot OS from Ubuntu 9.10 which is now o Windows XP Pro SP3.How can I do that?Grub 2 is installed
View 1 Replies
View Related
Jan 10, 2010
I have a 160 GB hard disk with three partitions (All NTFS):
C: (30 GB) (WINDOWS XP system partition)
D: (60 GB)
E: (60 GB)
I want to install Ubuntu on another drive (D: in this case). I have backed up all my data on D: drive. What are the steps in doing so and does Ubuntu support NTFS? If it does then will I be able to read and move data between all the drives without any problem (while running either of operating systems)?
View 3 Replies
View Related
Jan 18, 2010
I tried to set up a dual boot system on two separate hard drives. I installed Windows XP first (because doing so in past experience has made it easier) on the PATA 20 GB hard drive configured as slave on the first IDE channel. Then I installed Ubuntu 9.10 on the PATA 80 GB hard drive configured as master on the first IDE channel along with an NTFS partition on this drive:
[Code]...
View 4 Replies
View Related
Feb 9, 2010
I can't for the life of me get my GRUB whatever version I have to dual boot these. I've spent over 3 weeks on it and then finally gave up.
But It would be really nice since I have so much software that is solely devoted to windows. Not to mention with my photography stuff it's just a whole lot easier to run everything through windows. But for the general census I do prefer Linux.
I'm running these two operating systems. (although I can't access my Windows 7 because of the boot menu problem) I think that's all that needs fixed but I'm not sure.
Ubuntu 9.10 ( I believe it's 64bit although the "about" doesn't specify) Windows 7 64bit is installed. Currently I only have access to Ubuntu.
View 9 Replies
View Related
Feb 19, 2010
I have ubuntu 9.10 installed and working on a Pangolin Performance system 76 laptop with a 120 gb hard drive. The ubuntu install has 65 GB free at the end of hard drive (done using Fdisk). It is STATA II hard drive. I got a dual boot to work on a upgrade for an HP desktop for my mom so I know the basics. Using the windows 7 OEM home premium I go the first steps i.e. time ect. Then it shows partitions (as 4 seperat objects 1 primary and 3 logical). The 2nd and 3rd are swap and more ubuntu space. The free space also comes up as logical and is the 4th partition. I try to install and says can not use this partition on the hard drive.I press the format and in changes to extention but still gives the same error (error log is not viewable in the install). All a can do is press a formate button in the install no menu. I formatted as NTFS in gparted and it still would not work. I saw posts about bios and XP but they were old.
View 5 Replies
View Related
Feb 24, 2010
I am newbie to linux os.I want to dual boot ubuntu 9.04 with windows 7 which is already running on my pc.When i tried to do it with live cd i am getting an error message "Permission denied" while extracting files from cd drive.The log file shows the information given below.My system specifications are code...
How to do proceed with it?Any body know about the error in the log file?
View 5 Replies
View Related
Feb 24, 2010
For a couple of years I have wanted to use a version of Linux rather than Windows. I currently use XP and regard myself as a reasonably experienced Windows user. My current system has two SATA HDDs - roughly 500Gb, the 'D' drive, and 140Gb, the 'C' drive, and I have 1Gb RAM. So I decided to try Ubuntu 9.10. I downloaded the installation file, created the disk and ran it live for a time. Then I decided to take the plunge and install properly.
I created free space on the C drive, around 17 Gb, in which to install ubuntu. The installation into 'the highest amount of free space' seemed to go well but when I rebooted I was given no opportunity to select Ubuntu - it booted straight into XP. So I tried again. This time I chose to 'install them side by side'. Again the installation went well but again, on the reboot, the system went straight into XP. I guess I must be missing something - can anyone tell me how to install so that I can boot to either XP or Ubuntu?
View 3 Replies
View Related
Apr 6, 2010
Question in title. I just wanted to know if anyone has tried it and if they were successful. And, if successful, any tips to make it easier.
View 4 Replies
View Related
Apr 17, 2010
i am trying to dual boot 10.04 with windows.
Windows works fine and i have 200g of unallocated space for ubuntu.
When i boot from my burned iso image i get the following error
(this is not word for word) "The disk has encountered an in-recoverable error.
restart your computer or try the installation again".
Note: I have tried re-burning to a different DVD still the same thing,
Also just to test it out i successfully upgraded from 9.10 to 10.04. But i want a clean install not a upgrade.
View 2 Replies
View Related
Aug 12, 2010
I am trying to setup dualboot between Windows 7 and Ubuntu 10.04 on my new system.
I have partitioned off a 1.5 TB drive, and given 500GB to Windows 7, I have another 500GB drive in the machine that I am using entirely for Ubuntu.
I have Windows 7 installed correctly, and it boots/runs fine, then when I go to install Ubuntu, the install completes "successfully", but will not boot.
The first time this happened there was a flashing cursor that loaded in the top-left corner of a black screen instead of showing grub.
This second time around, the same thing happened. During the install, Ubuntu found Windows 7 Loader and added it to the grub menu.
I have tried using the super grub disk to find/resolve the issue, and when I boot using the super grub disk it displays a grub menu for me, and i can make my choice of OS.
If I choose Windows 7, everything loads fine, however if I choose Ubuntu from the menu, then everything goes black. My monitors turn off (not getting any signal), and I can't tell what's going on.
I am using the alternate install cd (have tried x86 and x64), and am installing Ubuntu using the Full Disk Encryption option.
I have run integrity checks on the install disks, and the memory check on my system, both have passed.
View 9 Replies
View Related
Dec 22, 2010
I've tried this once but it made my desktop inoperable maybe along the installation some things went wrong. I have this MSi all in one touchscreen desktop model AIO 2010 with windows 7 home premium installed on it and I want to dual boot with ubuntu 7. How to do it properly?
MSi All in one model AIO 2010
AMD Athlon(tm) X2 Dual core Processor 3250e
Hard disk is sata 320 g
ATI Radeon HD 3200 Graphics
How to properly install Maverick Meerkat
View 2 Replies
View Related
