Installation :: Setup Comp For Two Distros And No Windows?
Oct 20, 2010
Before I always had Windows partition and I was installing Linux on a second partition. Now I would like to reformat the HD and only have two Linux distributions installed. The idea is that one will be for everyday use and the other will only be used occasionally for things such as banking etc. So for me it's very important that one Linux distro does NOT see the other one, and certainly not to share things such as /home. So my question is, once i reformat the disk and start installing first distro, which partitions should I make? Can I make partitions for both distros while installing the first one, or should I go one by one? Can there be two / partitions or two /home partitions? I guess swap can and should be shared. If there can be only one / and one /home partitions, do I create another partition where the second distro will go? How do I then define the / and /home for that second one?
I hope someone who has done something like that can share his/her knowledge. If distros are important, I am thinking about Ubuntu or Kubuntu for everyday use, and CentOS for banking. If someone can suggest another distro based on their security track record, I'd love to hear that too. I don't need nor want servers, both will be desktop versions with all ports closed.
I have noticed a really bad problem on here that i never had on windows 7 even with overclocking.
It seems the fans stay on and are basically idling or are at minimum speed and the computer and graphics cores are just idling at 99c which is really dangerous, but not critical yet since this is an alienware laptop and the technician did say its temperature rating is above that.
The problem is I need to get the multiple fans in the case to start up and cranking like they do to keep the system really cool in windows 7. I kinda wanna get this fixed ASAP as i dont want to constantly be running at this temperature.
I have recently set up a dual boot comp running Windows 7 and Fedora 13 (test) and began noticing that after a short while,was taking forever to access web pages. When I look at my router which is running DD-WRT I noticed my active connections was over 500 whereas should only be around 200 maybe or less. This does not occur under windows,so am not sure where to begin.box is running 64 bit quad core processor.
I can ssh to the server but it wont allow me edit files, even though I have basic text editors like gedit and notepad installed on my windows computer. Anyone have an idea what the problem is? (I get an error message like this-(gedit:23978): Gtk-WARNING **: cannot open display
Are there any other Linux distros (apart from Ubuntu) which allow you to install 'on' Windows?I'm having problems installing Ubuntu on my Thinkpad, it keeps breaking down halfway during the installation. I wanted to try another.I wanted to try and use fedora KDE but it doesnt appear to have the 'windows' installation version?
I can't stay without ubuntu a single day. That's it. I said it. But I definitely need windows 7 cause I'm a heavy gamer. But I also like to keep and use other distros like Fedora. I came to read that only ubuntu uses GRUB 2.0 and it automatically detects all the distros which should be listed by GRUB 1.0. My question is,
How Can i set up the Multiple OS machine Ubuntu + Fedora / BackTrack / Suse + Windows 7? Someone on IRC channel told me that I just install Ubuntu last and it will detect all operating systems automatically.. But I'm a quite reluctant to that kind of short answer. It's now your call experts.
My brother the XP/vista/7 lover was wondering what all distros can he run from his XP hard drive without partitiong,etc like WUBI or Puppy in frugal mode is all I know? So, anyone know of all the distros that can be installed/run in windows without partitioning,etc? I dont have dindows so dont know...?
what are linux kernel and linux distros able to do that macs and windows computers can'talso are there some things that freebsd and solaris can do that others can't (you don't have to answer this one)
I just installed Ubuntu 11.04 via USB drive. I have 3 disks on my system. Two are 1TB drives and are actual real drives, labeled sda and sdb. sda is where I installed Ubuntu (on its own drive). I also made sure that GRUB was assigned to sda during setup.The 3rd drive isn't really a physical drive, it's a stripped RAID. My BIOS has Intel raid support, and I have 2 500GB drives that form one 1TB drive, and that's the one that Windows 7 is installed on. How do I setup GRUB to allow me to boot back into Windows 7?
How can I set up my pc where it default boots to my main HDD with Windows 7, and a secondary HDD with ubuntu after pressing F12 or something? I was going to just do a dual boot, but I remembered I had this extra HDD sitting around (which I was 'borrowing' from walmart for something I can't remember and lost the receipt =s) so I figured I'd just install ubuntu to it and dual boot like that.
EDIT: Disregard that. Just installed Ubuntu to my second HDD and it booted to the grub loader, which had the Windows 7 option in it. However, I do have one more question: as I'm still using the Windows 7 RC (which expires pretty soon), will a clean install of Windows 7 overwrite the grub loader seen on startup? If so, how do I go about booting back into the second HDD to reinstall grub?
we are having new printers. At the moment we over 1000 machines on multiple sites but no print server they are manually added on the machine ( I know don't ask).
Anyway there is no way they would let use a windows server so the only option I have is to use linux however I little unsure if it is capable of doing the job I need it to do. Basically I want to add the printers on the linux server either using samba or ipp (I would assume samba would be best).
The reason i want to do this is when we have to do around the machines I just want to go around the machines and just the map the printer and it brings down the driver and config etc as we want them to duplex. The issue is I been trying to gain information on the internet and getting conflicting information apparently I can add the windows driver onto the server so when I map the printer it brings it down. However some guides state you still have through the whole process of adding the printer and then choosing the driver etc. Which kinda of makes it pointless to do the printer server since I would already have to do this anyway if we don't have one.
I just want to go be able to go around the machines and for example click star run and do something like \192.168.1.1printer01 and then it done kind of thing.
Half of my hard drive is an unused partition, which is formatted ext2 which is just temporal and has no specific intention of mine. This unused partition has its own swap area, which is also a temporal and not important.
So my HD is:
Now, I'd like installing Windows 7 using these sda2 and sda4 partitions without corrupting current Linux installation and its GRUB2 setting(I'd likt to reconfigure the GRUB2 after successfully installing the Windows image, for the dual-boot).
I have tried many distros and get the same message faulty hard drive SATA the computer was running Windows Vista just fine. I changed the Bios for SATA to be ATA instead of ACHI..
Q1) I was wondering if it is possible to Dual boot Ubuntu with Windows XP on a 1TB RAID-0 setup ?
Q2) Also, is it possible to create a SWAP partition (for Ubuntu) on a NON RAID-0 HDD ?
Q3) Lastly... I read GRUB2 is the default boot manager... should I use that, or GRUB / Lio ?
I have a total of 3 HDDs on this system: -- 2x 500GB WDD HDDs (non-advanced format) ... RAID-0 setup -- 1x 320GB WDD HDD (non RAID setup) (The non RAID HDD is intended to be a SWAP drive for both XP and Ubuntu = 2 partitions)
I plan on making multiple partitions... and reserve partition space for Ubuntu (of course).
I have the latest version of the LiveCD created already.
Q4) Do I need the Alternate CD for this setup?
I plan on installing XP before Ubuntu.
This is my 1st time dual booting XP with Ubuntu.
I'm using these as my resources: - [url] - [url]
Q5) Anything else I should be aware of (possible issues during install)?
Q6) Lastly... is there anything like the AHCI (advanced host controller interface) like in Windows for Ubuntu?
(Since I need a special floppy during Windows Install...) I want to be able to use the Advanced Queuing capabilities of my SATA drives in Ubuntu.
I recently purchased a dell inspiron N4010 with windows 7 preloaded...i want to install fedora into it and i want keep it as my primary operasting system.... but what worries me is that the windows setup files is stored in a hidden recovery partion.... So if i install fedora will i lose this ??? if no will i will be able to install windows from that partion?
I want to multiboot several Distros for experimental purposes. My main distro is Ubuntu 10.04.Hard drive is partitioned like such: /dev/sda1, grup bios, size = 977 Kib/dev/sda2, file system ext4, size 1.8 Tib, this is mounted on / /dev/sda3 linux swap, 4.3Gib.My question is can I use Gparted to partition a second space out of sda2, and install another Distro? Do I mount it on / ? and will grub boot see both OS without destroying the kernel of my old distro? I am assuming to partition my hard drive I have to unmount it, but can I do this without using a live cd? So many questions and so little help, because apparently this is an easy thing to do.I am just worried just seems that what I just described is too easy and I will probably destroy everything and have to start over.
how to dual boot off of a usb. I am trying to learn to do them manually. What i do know is that i need a GRUB, and a splash screen of chuck norris., 2 ISO's, my usb is 16 GB FAT 32, grubbed up.
I was in the process of installing Fedora 12 when it came to the "Operating Systems List". Here it recognised only Windows and none of the other 4 Linux distros already installed. Looking at the option to "add" and then given the drop down list for each partition, can someone tell me what to enter in the LABEL box for these partitions, or how to find what to enter in these boxes to enable these distros to be booted?
I dual boot multiple distros of Ubuntu and I'm trying to use my /home from 9.10 for 10.04 also.Is this possible? If not, does anyone know if I can copy sections of my 9.10 Crossover files to my 10.04 /home. Biggest thing is for WoW which takes forever to load each new distro I upgrade to.
I have 2 distros installed right now and generally keep the main one and install and look at other distros.My question is this; Can I install a second distro and not let it take over my frub/boot menu and NOT let it control the boot menu? If so how would I do it? I always get confused when I install the second distro when it asks what to do,use / or boot as the option etc...
I appologize if this has already been posted but there are 1001 pages here and I did do some searching - I'm just soooo tired by this point. This whole linux thing is starting to lose it's luster. I've never used linux before and wouldn't know how do deal wtih command line anything - whether its understanding what the system generates or entering it.
For the last 3 days I've tried to install, first - xubuntu, then openSuSe, then ubuntu desktop on my desktop unit then to run ubuntu netbook live on my laptop with the intent of doing a permanent install (if I could see I would be able to get everything working right by trying live first).
So I follow the instructons given on the ubuntu site, using the universal usb creator - it tells me that the operation was successful or something like that. So I proceed to 'attempt to' boot from usb but I find out my bios (on the laptop) does not support booting from usb (go figure!). So I go get this thing called PLoP, burn the .iso to a cd, put the cd in my drive and the usb inserted in the computer too and I reboot and enter my boot menu, select to boot from the optical device (my cd with PLoP on it) and use PLoP to select and boot from usb. Ubuntu runs for a bit I get past the logo with the status bar under it, then I get all this techo whatchamo spit out at me on the screen. Don't know what it means, just know it means I won't be enjoyin any Ubuntu tonight. Very sad.
I did manage to type in help and hit enter and in the list of commands given I noticed one that I though was interesting. "exit" So I put in exit and hit enter and it spit out a bunch more stuff at me. I only mention this because that is what is in the pictures I've attached. One pictures is before entering "exit" (on the laptop) and the othe after entering "exit" (on the laptop). There is also one that shows the screen from my desktop (after entering "exit"). I tried to run Ubuntu live one last time on it right after my last laptop fiasco; and, if you notice, some of the same information is given between the desktop and laptop. (matching infromation between the machines is after entering "exit" on both machines).
I attached the pictures and specs on my laptop hoping they may be useful. I've done all I know how and I'm just starting to get really tired here. If I wasn't so sick of Windows I'd have probably given up by now. I just can't bring myself to blame Ubuntu though. I am certain that Ubuntu is fine. Its either, first, user error, or somthing with my machine. Just that Ubuntu says the same thing about both machines. Hope someon can help. Sorry for the long post.
I'm trying to make my own boot CD with different linux distros and tools. These are the things I'm going to include on the CD:Lucid Puppy 5.11 (Live)Damn Small Linux (Live)Gparted LiveArch linux net install(Total size: about 600 MB)I was thinking about using GRUB legacy as the boot manager on the CD, but I'm wondering how I can install GRUB to a CD. I've been experimenting with the live CD of Ubuntu, but when i start to delete the Ubuntu files (which I don't need) it messes up the filesystem manifest and I'm left with a non-bootable .iso. So I want to build GRUB from scratch and add all the entries to the menu.lst.
I'm currently running Mandriva One 2010 and Fedora 13. I'm dual-booting, with each distro having it's own *single* partition, a third partition as a common swap, and a fourth partition for my files (docs, downloads, video, music, etc...) I'm mounting/binding folders on that fourth partition to the Downloads, Music, etc, folders on each distribution. It works beautifully, as all of my content is readily available under each distro. I did the same with my /home/me/.mozilla folder. My idea was that my bookmarks, plug-ins/add-ons, settings, etc, would be accessible under both distros. It works, but I'm getting some annoying side effects that I'd like to alleviate: 1) It checks add-on compatibility each time I switch distros and open up Firefox. 2) Smooth scrolling has to be re-enabled each time I switch and open Firefox. I figure this has something to do with it being shared between two distros, but I'd like some assistance in getting it all figured out. BTW, here's the line in my /etc/fstab file (on both distros) that mounts the folder.
/dev/sda2 Primary Linux ext3 /dev/sda3 Primary Windows /dev/sda5 Logical Linux ext3 /boot /dev/sda6 Logical Swap /dev/sda7 Logical Linux Ext3 /home /dev/sda8 Logical Linux ext3 / [Code]...
After this install I wished to try out Backtrack 4 which I installed on /dev/sda2. The version of GRUB which was installed with Ubuntu 9.10 got wiped out and the version of GRUB with backtrack was installed . However the menu did not consist of the Ubuntu 9.10 booting option . How should I edit menu.lst so that I can get all my Ubuntu 9.10 booting option along with my backtrack installation
I know it's possible to to have multiple distros on one hard disk, and set it up so you can just have one /home partition and use it for all of the distros on that system. My question is, how efficient is that? Does it bloat the /home out with a whole bunch of stuff that might slow a particular distro down because it's filled with stuff from another? (I.e configs). And let's say I have two distros that are of different bases, say ubuntu and arch, does this make a difference? I know obviously that my personal files will all be accessible and not matter which distro they are being read from, but I'm talking more about the hidden stuff.
