Fedora Installation :: Running Fedora 11 On External Usb Hard Drive
Aug 3, 2009
Background is this: Laptop has an internal h/d (obviously) so I removed it from laptop. Then set Bios to boot from external h/d. Installed Fedora 11 on ext. h/d no swap partition as drive already has 4 partitions. Fedora ran lovely!! I then replaced internal hard drive but left bios to boot from external hard drive. Boot screen for fedora came up, hit enter and fedora started loading. The little balloon started filling up, got to a quarter full and then screen went black. Had to reboot to get going again,same thing happened. Can anybody tell me what may be causing it,i.e. black screen. Fedora boots up and runs lovely with internal h/d removed. Any help very gratefully received. M/c has intel dual core processor, 3 gig of ram.
View 2 Replies
ADVERTISEMENT
Mar 30, 2011
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
View 2 Replies
View Related
Apr 9, 2009
I have got a hold of a extra hdd along with a hdd enclosure. I have tried looking for information on how to install linux on to one but haven't been completely successful on my search. So I turn to all of you. I was also wondering if its possible to have it were I can use it on multiple computers so I can use it for computer repair.
View 3 Replies
View Related
Jun 4, 2011
I want to mount external hard drive using fedoracore 15 on a Verbatim 500 GB.
View 1 Replies
View Related
May 30, 2011
I have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
View 13 Replies
View Related
Jun 8, 2010
I am noticing problems accessing the firewall gui and mounting the second hard drive in my PC running Fedora 13. This is only when I am accessing the machine with VNC. If I am sitting in front of the physical machine, I have no problems at all. I would like VNC to behave more like I am sitting in front of the computer. Is there a way to do this? Thank you in advance for your feedback.
View 4 Replies
View Related
Sep 17, 2009
I have a notebook with Windows XP and Ubuntu 8.04 (Ubuntu was installed using wubi) installed on a 80GB HDD.I have installed Fedora 11 on an external 500GB USB hard drive. It worked quite well. Now I want to replace my old 80GB HDD with the external 500GB HDD (so that I don't always have to plug the external HDD in order to use Fedora 11).That is, the 500GB is going to be inside the notebook.What do I have to do? Simply replacing the old HDD with the new one did not work.
View 14 Replies
View Related
Jun 19, 2011
I have windows on my box, I have fedora 14 on my external that goes through my usb. Grub is installed on my usb. Since the only thing stored on my external was fedora i really didn't have to do much to it. just go into bios and boot from usb. Now that im using fedora more, Id like to add Vista to my choices. I guess the numbers change once your using an external drive. Ive read some of the problems like mine but they didn't quite do it. Im going to inclose 2 screen shots of my drives/partitions and my grub.conf.
# grub.conf generated by anaconda
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
[code]....
View 2 Replies
View Related
Oct 15, 2010
i have a 1 TB external hard drive and i have created 4 partitions as 3 of 300 GB , and one of 100 GB and i have format it as FAT but it is not showing 4th partitionand when i use fdisk -l it shows it as linux partitions and they are mounting in linux onlywhen i use the drive in windows , disk is not able to mount
View 3 Replies
View Related
Dec 1, 2009
I would like to backup up my linux files to an external hard drive from a laptop. What would be the most simple and easiest way to do this? How would I format an external hard drive in linux.
View 4 Replies
View Related
Aug 17, 2010
I just had a fresh install of Fedora 13 x86_64 on my notebook after using fedora 13 x32 for a while.I am using KDE Desktop.Everything seemed to be working fine out of the box except for minor problems with sound and plugins.The biggest issue is that Fedora does not recognize when I plug an external USB HDD (WD 320 GB for this matter).The USB light on the HDD does not go on, and nothing is auto mounted.It seems that USB does not work at all - I have tried to plug another USB device and it didn't seem to have power.
View 2 Replies
View Related
Dec 23, 2010
I have an external hard drive that is connect to my laptop through USB port. But it won't show in my folder. I've looked every where but could located.
View 1 Replies
View Related
May 27, 2011
Running fedora14 on a dell latitude-d600 laptop and I'm trying to access a 500gb sata external hard drive that is connected via usb. The laptop can see the drive as '500 GB Hard Disk: 524 MB Filesystem' and it's clearly mounted under the '/media' directory. However, when I attempt to read the files on it, I am only able to see the 524mb section of the drive. The external hard drive is an ext3 file system (running fedora13) and I believe it's encrypted.
View 14 Replies
View Related
Mar 24, 2010
I've got this hard drive that I know that is formatted to either ext3 or ext4, but I want to find out which format it is. I'm unfamiliar with many commands, I tried 'fdisk -l' but it didn't yield any useful information to me. Is there a command wherein I can easily find out the format of disks?
View 3 Replies
View Related
Mar 31, 2011
I have been a Linux user for about 6 years now, and recently switched to Fedora just to try something new. I used Ubuntu for the majority of the time so I am somewhat familiar with the command line, but seem to be having trouble with my external HDD. Ubuntu automounted it no problem. Fedora doesn't seem to like to do that. I tried searching and I did what almost every thread insisted upon; which is mount /dev/sdb(that is what dmesg said) but it says already mounted or /mnt/busy. So this is the extent of my Terminal experience with mounting an external drive, and I am completely dumbfounded as to why it simply won't mount. I am liking Fedora so far and so long as there is a remedy for this I don't plan on going back.
View 3 Replies
View Related
Aug 9, 2011
I installed Fedora 15 5 days ago after using debian-based distros for a few years, and until now I've had the habit of sharing many files (mostly multimedia) on my home network, except since I'm the only one using Linux, I have to do it using Samba.In Ubuntu, Xubuntu and Linux Mint, this worked like a charm.
Two things have changed this week: I switched to Fedora 15 like I said before, and I bought a new USB external HDD. I previously used a 500 GB Western Digital, and changed for a 1.5 TB SAMSUNG which is linked to my station via USB. The drive works well and I cp'd the 450 gigs of the ancient drive within the new one without a problem.
Ever since I managed to set up fedora and GNOME 3 as I would like it, I've been trying to setup the network sharing via Samba, and that's a genuine 4-day long headache now.Thing is, yesterday, it worked. After setting everything right, creating an automount of the external HDD in a maybe-too-much permissive folder, allowing Samba through the firewall, getting to know that buddy called SELinux I had never met before and which I struggled to tame ; after setting everything up, it worked seamlessly, I streamed music from the Windows PCs of my network and began watching a film.
Except I had a problem which had nothing to do with Linux: letting the USB drive plugged in on startup prevented the BIOS phase from going well, and my station was stuck on my motherboard splashscreen. To fix this, I had to disable the USB Legacy in my BIOS. Did the trick. Yesterday night, I rebooted like that, and everything was fine.This morning, Fedora wouldn't boot. Since the new BIOS parameters didn't switch the drive on on startup, fstab was trying to mount a drive which wasn't there, and thus crashed, switching to emergency mode.Had to remove the ftsab line concerning the USB drive for Fedora to boot again.
Alrite, that's fixed, I thought ; I just changed the fstab options adding noauto,user, etc. and I thought it would be ok, but it ain't.It's now been 3 hours without me finding any clue as to how to get this working.
IMO, the problem comes from the fact that Samba is missing the right to access the drive. Samba seems to be OK: from the Windows station I can see my Linux station on the network map, I can access it entering the Smbuser I created for this, and the "ext-hdd" dir is present (that's the alias I used in the Samba config files), but when I try to access it, Windows says it can't access it.
I'll try to add as many pieces of information as possible that might be useful:
SELinux config:
Code:
[norfen@norfens-station ~]$ getsebool -a | grep samba
samba_create_home_dirs --> on
samba_domain_controller --> on
samba_enable_home_dirs --> off
code....
View 7 Replies
View Related
Jan 14, 2009
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
View 14 Replies
View Related
Aug 4, 2009
i am using fedora 11 and i want to share my western digital external hard drive over my wireless network like i previousely did with my windows os. it is connected via usb to my computer. how do i do this ?
View 6 Replies
View Related
Aug 14, 2010
When I inset my External Hard drive into my laptop it shows 27.3 gb occupied but doesn't show all the files. Also , this is happening only now.
View 10 Replies
View Related
Sep 30, 2010
now I'm done full transition from windows 100%.i want ask how can i check my memory stick and External Hard Drive from virus ?
View 9 Replies
View Related
Jan 11, 2011
It started when I wanted to dual boot Windows 7 and Opensuse off of my netbook (No DVD/CD drive) I tried install suse from an external hard drive and I botched it. I ended up erasing EVERYTHING off of my internal netbook hard drive. Windows and all.
Well, I had a couple of other computers so I studied up and eventually successfully installed OpenSUSE 11.2 on my external hard drive (11.3 being the one that I accidentally erased everything with, so kinda scared of it) and now I want to install openSUSE 11.2 on my internal netbook hard drive.
I can not use disks
I can not use a flash drive (For some reason, even if I make it bootable, it will not load up, this could be because it's actually a 8GB microSD card that is placed in a USB card reader.)
I can not use an external hard drive because that's what I'm running suse off of.
I've tried reading up on how to install suse on another drive off of the hard drive and I've gotten as far as whenever I boot up the netbook with the suse external hard drive connected it will ask to boot into OpenSUSE, the Fail Safe, or to install OpenSuse. When I select to install it it gives me the Error 18 Unknown File system.
I've tried formatting the internal hard drive twice. One as NTFS and again as EXT4. Neither seems to effect it other than when it's ext4 I can open it and it contains a Lost and Found folder.
When I interrupt the boot sequence by pressing c and going to the terminal and I use the root (hd +TAB command it tells me I have a hd0 and a hd1. The hd1 only has 1 partition which is ext4, which I'm assuming hd1 is the internal hard drive (I'm not sure how to check) and the hd0 is the external hard drive, which has three partitions. One with an unknown file system and two with ext4. When I try to enter the set up from the terminal it gives me the same error for any thing I put it (e.g. root (hd0,0) gives the same error as root (hd0,1), or root (hd0,2) and root (hd1,0)
Something like it cannot locate these two files I'm assuming it needs to boot. If anyone finds this relevant I'll retry it and post the files its missing.
I've been searching for awhile and can't find any threads that can solve my problem. From other threads, however, I have noticed that I should probably include my menu.lst, listed below
Code:
I have also ran the boot info script and received the RESULTS.txt file it generates. Listed below
Code:
View 9 Replies
View Related
May 1, 2010
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies
View Related
Jul 13, 2011
I purchased a Seagate Goflex 500GB external hard drive yesterday and tried to connect it with my Fedora machine. Unfortunately my machine could not mount the drive. I have never had such problems earlier with other USB drives.PLease, how to use this ext disk on the fedora machine.
View 7 Replies
View Related
Sep 17, 2010
i installed Fedora 12 on an external hard drive. Everything went fine with the installation and it was working perfectly until i tried to install my video card drivers. I have done this many times before and it has worked. I have an ATI card. Anyway after installing the driver i rebooted and now when it starts it show the loading bar on the bottom but then nothing happens its just a black screen!. The worst part is that when i go into windows and my external is plugged in windows wont read it and i have very valuable data on it. I go into disk management and it shows up but windows says that its empty. which is obviously not true because Fedora starts to boot. I really just want Fedora off my external and for windows to read my external with all the files still on it. Is there a way to get by that blank screen?
View 2 Replies
View Related
Jun 19, 2011
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
View 2 Replies
View Related
Sep 28, 2009
I have a Western Digital Pasport 320 GB hard drive. I wanted to create a live installation on it like a USB stick. I wanted it to serve as a portable OS that I could use to boot any other computer off of, and use it for diagnostics and anti-virus scanning on Windows based computers. The additional space is for my own personal use, kind of like having a mobile desktop where I have all of my documents in one place.What I need to know is how to set up Fedora 11 so that the hard drive will boot on most PCs regardless of their architecture. I also need to know what's a good Anti-virus to install onto it for the sake of fixing Windows hard drives.
Please keep in mind I'm a noob when it comes down to a lot of things, so if there's an antivirus I have to install manually, please included a step by step.
View 1 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Feb 2, 2011
I'm a newbie and can't get to linux on my external hard drive. I recently did a full install of Ubuntu 10.10 and am currenly running XP on my main drive. When I boot I can choose to go to my ext hard drive, which holds Ubuntu, but I'm stuck with a grub command line. What do I need to do to boot into Ubuntu from grub?
View 8 Replies
View Related
May 6, 2011
I was wondering if it were possible to run and boot Ubuntu off of an external hard drive, I have a Seagate Free Agent 1.5 Terabyte external hard drive, I formatted it to FAT32 but am willing to reformat if necessary. I just really want to be able to have Ubuntu to run off of an external hard drive.
View 7 Replies
View Related
Sep 18, 2015
I have got a 1TB USB hard drive, which I partitioned to be 500GB NTFS and on the other half I installed Debian 8.1.0. During graphical install I selected to install the bootloader not to the MBR but also to the external drive. After completing the installation I wanted to boot into Debian, but it just started Windows, which is installed on my internal. Even after choosing the USB drive in the boot menu, Windows booted. I later installed the bootloader to my internal, then I could boot into both Debian and Windows, but only if my hard drive was plugged in.
View 14 Replies
View Related
