Ubuntu :: Installation Of Codendi Project Management Software - Script Doesn't Get Executed
Jun 30, 2010
I'm trying to install Codendi project management software in Ubuntu. this software is recommended to run in lynx by xerox (manufactures of Codendi). Since Ubuntu too is a lynx OS I used that for my installation. My issue is when I try to run the installation script codendi_install.sh the terminal window loads and in few seconds it closes, the script doesn't get executed. when tried from the terminal by navigating to the cdrom, I cant list the files in the CD rom.
View 2 Replies
ADVERTISEMENT
Mar 2, 2011
Does anyone have a recommendation for project management software? We don't need anything too fancy - just boiler plate tasks, time lines, Gantt and Pert charts, etc. We would like to put the area on the web with Apache using SSL/TLS and password authentication or client authentication (and an alternate port).
View 6 Replies
View Related
Mar 2, 2011
Is there any reason why taskjuggler is not included in openSUSE? I can see a version available in openSUSE Factory but it is not built with latest libs. I have several of my friends asking for Project Management software under openSUSE and I don't know what to advise them.
View 9 Replies
View Related
Feb 7, 2010
When trying to load Qmake project in kdevelop it fails and write: "Could not load project management plugin KDevQMakeManager" and then:
"project importing plugin (KDevQMakeManager) does not support the IProjectFileManager interface."
View 5 Replies
View Related
Feb 2, 2011
We are about to migrate our very old ERP (from 1995) to a brand new one as the old one, really, just can't do it any more.In charge of the project, I would like to know what would you recommend as project management software for this.I've found a list of few here, but I don't know what they worth:URL...
View 6 Replies
View Related
Jun 15, 2009
I just upgraded from FC10 to FC11 (32-bit) on an old Dell laptop. I set my power management settings (in Gnome) to turn the monitor off after some idle period but always leave the computer running and the hard drives powered. I also set my screen saver to a blank screen. I noticed that the screen saver does come on (turning the screen black), but the monitor back lighting never goes off. I tried different idle times for the power management settings (I usually set it to 1 min, but some other posts implied that 11 mins might work). I should also mention that this is after I've logged into a user account, not sitting at the login screen.
I didn't have this problem in FC10 (the monitor would actually turn off) so I figured it was a bug in FC11, but I can't seem to find a thread addressing this issue. I've found some what similar threads, but none mentioning this particular problem.
View 13 Replies
View Related
Jul 19, 2010
I am working on Ubuntu 9.10.Since last two days there is issue while working with Terminal.Whenever I type a command and press enter it doesnt do anything. command is not executed. I guess its in loop. when I press Ctrl+C then it comes out of loop. this happens with all commands and I am not sure what is the problem.I have reinstalled Terminal but it did not worked.
View 8 Replies
View Related
Dec 12, 2010
I've recently got a problem. I've installed projectM, the pulse audio version. It worked fine until a couple of days. I noticed, that the visualization isn't synchron with the music. Then I opened pulse audio to check the volume controls. The blue bars showing the intensity of the loudness don't move at all, it's all gray. ProjectM can't analyze the music and therefor cannot visualize correctly.
View 6 Replies
View Related
Sep 24, 2010
I was trying to install java on 10.04 in firefox. Now whenever I try to get new software, there is none to be found. I am getting the error message "E: Malformed line 54 in source list /etc/apt/sources.list (dist parse) E: the list source cannot be read". To top it all off, I still cannot get java to function. I am pretty new to this.
View 7 Replies
View Related
Oct 10, 2010
I have a 2 TB disk in an external SATA dock, formatted with a single ext3 (Linux) partition, which doesn't show up in the Windows 7 Computer Management->Disk Management utility, even as a raw/blank disk. I've verified that there's nothing wrong with the disk by connecting it to my Linux machine and mounting it, and I've verified that the dock is functioning properly by connecting a different FAT32-formatted disk, which mounts flawlessly as expected.I realize that I can't actually read the ext3 partition without additional software (e.g., Ext3IFS), but why doesn't the disk show up at all? Is there some sort of stupid anti-Linux filter built in? Is there any way to force Windows to recognize the disk, so that I can at the very least use direct block access with it?
Background: I want to clone an identical 2 TB disk onto this one. Due to my hardware layout, it's much easier to have the source disk attached to one machine and the destination disk connected to another, and do the clone over the network (the network is not a bottleneck with switched gigabit ethernet), than it is to hook them both up to one machine.(1) I did this once before when both machines were running Linux, but I've since upgraded the destination machine and decided to switch back to Windows for regular desktop use. I've got Cygwin installed, and have verified that the same basic method (dd + nc) will work, but I can't do anything if Windows doesn't even consider the destination disk to exist.I only have one eSATA port on each machine. Opening them up just to do this clone is a rather large annoyance. Also, since this is my backup disk, I'd like to eventually automate the cloning from the active disk to another one that I regularly swap with a third disk that I store off-site.
View 1 Replies
View Related
Oct 18, 2010
I have tried to install ns-allinone-2.29.....i followed the process given on the net....everything got installed properly except tcl and i got the following message tcl8.3.2 configuration failed! Exiting.... Tcl is not part of the ns project
View 3 Replies
View Related
Jun 28, 2010
Alright, I just wanted to see if this would even work, so I installed Ubuntu Lucid Linx 10.04 on a 2001 Sony Vaio with 1.7 Ghz. Intel P4 processor and, yes you're reading this correctly, only 256 MB of PC2100 Ram. I dumped in my own PCI wlan card and 64 MB Radeon 9000 Pro AGP card, then I did the installation.
Although I already ordered 2 mem chips (512 MB each) for this system which will max it out, I also created a 5 GB swap partition since I figured that this would greatly enhance the installation and consequent usage thereafter. Now mind you, the installation of 32bit Lucid worked like a charm. Slower than normal, but like a charm. Wifi is working and even the 3D desktop settings are working in advanced mode. BUT the system is just way too slow to react to the mouse and keyboard. I'm certain that the lack of memory has a lot to do with that although I was secretly hoping that the huge swap file would help to make a big perfomance difference. So here now my questions:
1. The swap file doesn't really appear to have made any difference at all. How come?
2. If I wanted to "downgrade" to Xubuntu, how would I accomplish this?
3. Would it be a better idea to just start over with an installation of Crunchbang instead?
I'm trying to get this system working for a relative who's never had a computer before. Whatever I end up with on this machine has to be as simple as possible to use while maintaining some semblence of decent perfomance. I'm sure before too long they'll want to enhance their desktop looks/theme as well so consideration needs to be given to that too. Your suggestions and comments would be appreciated. Again, Ubuntu Lucid runs just fine, although really really slow. Internet is no problem.
View 5 Replies
View Related
May 28, 2011
I just did an upgrade from F13 to F14.[*] Now, power management (in Gnome) does not work any more. For example, when pressing the power button, there is just a 'Cancel' button (no button for shut down, suspend, hibernate), in Gnome menu there is no possibility to shut down, and in 'gnome-power-preferences' most options do not work at all. For example, there is no other option than 'Blank screen' for 'When laptop lid is closed' action. When starting 'gnome-power-preferences' with '--verbose' parameter, I get following error messages:
Code:
Cannot add option, as cannot suspend.
...
[code]....
View 1 Replies
View Related
Apr 28, 2010
Umarks is no longer under development.
View 9 Replies
View Related
Oct 11, 2010
Can I delete the ext and swap partitions from disk management on windows 7 ? Because I want to install a fresh new copy of ubuntu 10.10 . I know it would affect windows 7 boot up.I can handle it by system restore Anyway can I do it or not ?
View 5 Replies
View Related
Sep 1, 2011
Here's the error I get:
"The configuration has not installed correctly for Gnome power management".
Updated my 11.04 install via the update manager last night. When I turned my computer on today it wouldn't boot into the normal gui desktop. Where my normal login screen usually appears a different login screen appears with my username. I login. Screen flickers black for a few seconds and a page with a ton of text shows up for a fraction of a second ( too short of a time to read a single word). more flickering. Then I am returned to the slightly different login screen once again with the error. I tried booting into failsafeX gui mode. Same issue.
View 2 Replies
View Related
May 22, 2009
Does anyone know if Konquereor can be set up so that it displays the File Management View Profile when it opens?I am using: Fedora 10, KDE 4.2.3 and Konqueror 4.2.3
View 13 Replies
View Related
Feb 29, 2016
I've installed Debian twice on my new system and always have mei_me errors and the system doesn't boot. The errors are:
mei_me: HBM haven't started
mei_me: link layer initialization failed
mei_me: init hw failure
mei_me: initialization failed
While it would suggest some sort of hardware problem, this system is working fine with Ubuntu 14.04 & 16.04.
View 1 Replies
View Related
Feb 20, 2010
Pretty much self explanatory:This morning I went into the update manager, and found a bunch of RPM package-management stuff such as rpm, alien, compiling tools, etc. What is up with this?I suspect they are setting the scenery for some big press release saying they now support RPM packages in Ubuntu too. Any ideas? (or better, inside info from someone who knows)
View 3 Replies
View Related
Jul 14, 2011
I added a code into terminal and restarted, then I tried to install Java and this came up.'There seems to be a programming error in aptdaemon. This is the software that allows you to install/remove software and to perform other package management related tasks.'
PHP Code:
Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 961, in simulate
[code]....
View 1 Replies
View Related
Jun 10, 2010
i wiped my entire hard drive that had xp as its only OS. I freshly installed a Windows 7 ultimate and everything went perfectly. I then decided to install 10.4. I split the partitions correctly (i had experience doing this already with my laptop, which has xp/10.4). Ubuntu 10.4 install went flawlessly, except for one thing. Now when i boot up the pc, it goes straight into 10.4. I have tried holding shift during the start up to force the boot menu, and it just shows the Ubuntu 10.4 OS as choices. Any clue what i could do to make Win7 appear in the boot menu?
View 9 Replies
View Related
Apr 12, 2010
I usually set the transfer rate for wlan on start up because I dunno any other way of doing it. I find it weird that every other ubuntu versions can do rc.local at startup, even 9.10 xubuntu, but it didn't work for ubuntu.
how can I get the computer to run the script on startup? I tried to google for the problem but I only seen people mentioning the problem not the solution.
View 8 Replies
View Related
May 8, 2010
I am trying to install madwifi on fedora 12. I am getting following error which i "make" the project.
[code]...
View 3 Replies
View Related
Sep 7, 2010
When I run the following command from my macbook to my ubuntu server the terminal does not get released. It just sits there until I Control-C the command.
Code:
ssh user@my-server 'sudo /etc/init.d/nginx start'
When i login and then run the command everything works fine.
Code:
ssh user@my-server
sudo /etc/init.d/nginx start
[Code]....
View 1 Replies
View Related
Apr 1, 2011
I am using Tor 0.2.1.30 with Polipo and Vidalia 0.1.15, Ubuntu 10.04. Running tor on terminal works fine, but vidalia gets stuck at 85% The message log, as I understand it, shows it getting stuck at finding the right bridges, but the terminal tor is able to connect fine... ##This is what the vidalia log looks like. The log shows me trying it two times. Apr 02 01:32:56.698 [Notice] Tor v0.2.1.30. This is experimental software. Do not rely on it for strong anonymity. (Running on Linux i686)
Apr 02 01:32:56.699 [Notice] Initialized libevent version 1.4.13-stable using method epoll. Good.
Apr 02 01:32:56.699 [Notice] Opening Socks listener on 127.0.0.1:9050
Apr 02 01:32:56.699 [Notice] Opening Control listener on 127.0.0.1:9051
Apr 02 01:32:56.699 [Notice] Parsing GEOIP file.
Apr 02 01:53:08.204 [Notice] Have tried resolving or connecting to address '[scrubbed]' at 3 different places. Giving up.
[Code]....
View 1 Replies
View Related
Dec 8, 2009
I need to add -audit to the process /usr/bin/Xorg :0 -nr -verbose -auth /var/run/gdm/auth-for-gdm-MTmpH6/database -nolisten tcp vt1
And have added -audit to the line in /etc/X11/xdm/Xservers but with no luck. I can't seem to find where this thing is getting launched from!
View 1 Replies
View Related
Oct 19, 2010
i have install php and make proper confgiuration as said in various books and forums.but |all what i gotis just blankpage which means it knows that thereis the file at given folder but it cannotexecute.
View 1 Replies
View Related
Jan 18, 2011
I have a script scheduled to run with Crontab at 5am each weekday.The script is all good and executes manually (is just a simple stop/start of a service)I have reason to believe that it is not executing according to schedule.I am looking to see when a script was last executed.The script is executing accordingly (long story short, I forgot it was Tuesday). I would still like to know how to check a last-execution time.
View 1 Replies
View Related
Jun 16, 2010
How can I find out which script runs and automatically mounts any usb drive inserted? This script seems to be faulty because it fails on ext3 disks but functions fine on NTFS or HFS+ disks. If I can find out which script it is maybe someone can help me fix it?
View 14 Replies
View Related
Jan 30, 2010
I'm trying to figure out how to launch rc.local before services like autofs is being executed during system bootup. The reason I wanted this is because I needed for my server to pickup a DHCP address from my college's DHCP servers in order to get an IP address. Unfortunately, I couldn't get an IP address any other way and the update-rc script is really confusing to use.
View 1 Replies
View Related
