We are about to migrate our very old ERP (from 1995) to a brand new one as the old one, really, just can't do it any more.In charge of the project, I would like to know what would you recommend as project management software for this.I've found a list of few here, but I don't know what they worth:URL...
View 6 RepliesDoes anyone have a recommendation for project management software? We don't need anything too fancy - just boiler plate tasks, time lines, Gantt and Pert charts, etc. We would like to put the area on the web with Apache using SSL/TLS and password authentication or client authentication (and an alternate port).
View 6 Replies View RelatedIs there any reason why taskjuggler is not included in openSUSE? I can see a version available in openSUSE Factory but it is not built with latest libs. I have several of my friends asking for Project Management software under openSUSE and I don't know what to advise them.
View 9 Replies View RelatedWhen trying to load Qmake project in kdevelop it fails and write: "Could not load project management plugin KDevQMakeManager" and then:
"project importing plugin (KDevQMakeManager) does not support the IProjectFileManager interface."
I'm trying to install Codendi project management software in Ubuntu. this software is recommended to run in lynx by xerox (manufactures of Codendi). Since Ubuntu too is a lynx OS I used that for my installation. My issue is when I try to run the installation script codendi_install.sh the terminal window loads and in few seconds it closes, the script doesn't get executed. when tried from the terminal by navigating to the cdrom, I cant list the files in the CD rom.
View 2 Replies View RelatedI have been searching for information about the ways Debian allows for anyone wishing to give a helping hand to the project. I found that joining maintainer groups, helping in writing documentation, bug reporting and financial help are all accepted, but what I intend, was never mentioned.
Is it possible to help Debian by submitting original source code? Yes, it is true that I contacted GNU about this, but the decision is still mine, and GNU is not binding me to give my source to them.
The source code I am talking about, took more than a year to complete and debug, and has been working without problems for more than ten years. Furthermore, it has no dependences as it does NOT delegate part of its functionality to other existing projects.
Although, I am still in my early forties, and as far as I know, I don't have any life threatening illness, we are all mortal, and I don't want my work, that took many months of hard work and concentration, to be erased to make room for the only operating system my heirs know.
Where is Eclipse PDT? I have installed F12 with all Eclipse packages including PDT but I can't create a new PHP project!
View 1 Replies View RelatedDoes Project M work on Fedora, and if so, what desktop. I suspect it might work on Gnome but not LXDE. I have an Intel graphics card so that should be OK.
View 2 Replies View RelatedI am an undergraduate anthropology student doing research for my dissertation on the F/OSS community.I'm interested in are forking (What sort of thing causes/averts a fork? Have you ever participated in one?), the process of decision making (Is consensus democracy effective? Where do communication structures often break down?) and any other reflections or thoughts that you think are relevant.
View 3 Replies View Relatedalso some options in menues are disable..when i go to the terminal it shows this msge:<unknown program name>(5763)/ KDevelop::allocateRepository: picked duchain directory "/home/forensic/.kdevduchain/{61e2fad9-a888-45c7-91e7-c7098bc67b94}/0"maybe i made mistake in one step of compiling it..
View 11 Replies View RelatedI would like to ask your opinion for a new C++ project.I just finished writing a chess engine in a software engineering lecture.I don't see any way to continue with that project and I would like some new ideas.I would prefer to start something on my one but suggestions about small open source projects that are already out there are welcome.
View 3 Replies View RelatedI have project released under GPL. I have found an icon (.png) I want to use in it that also has a GPL license. What do I have to do, if anything, to use it legally? It's "just an icon", and while it represents a significant amount of work on someone's part, it doesn't come with any source code or embedded licenses that I can just copy and include with my project files. I'm sure I can use it because it's GPL and my project is GPL.
That's what GPL was designed for, but I don't want anyone to think I'm claiming I designed it or that I took it without giving proper credit. I just reread the GPL, and it looks like I can do anything I want with it as long as I don't restrict anyone else from doing the same and if I were to modify it, I'd have to put a notice "somewhere" (but where would that be for an icon?) acknowledging that modification. I don't see anything that would make me actually mention it at all in my documentation, etc. as long as I pass it along unmodified.
I was following the help file tutorial for creating a New Java Project using the Eclipse IDE, but neither the finish, the next buttons do anything when I click them... Does anyone know why this is happening, and how can I fix this completely unacceptable issue?
View 4 Replies View Relatedafter giving up to install kdevelop3.5.5 under 11.0 since after searching and installing a lot of missing components following by installing another lot of missing components for python I would like to convert my C project from 3 to 4.Can anybody tell me what the best way might be.
View 1 Replies View RelatedA couple of months ago I saved an audio-project in k3B. I wanted to burn a new cd today, but the CD-list remains empty when loading the project. I suspect I removed/renamed the folder where the mp3-files are located, but I cannot remember how or where. Is there a way to read in the project-files where the mp3-files were located at the time of saving it?
View 1 Replies View RelatedYesterday I spent a good couple of hours putting together a video. When I shut down, Lives flushed my entire project because it uses a tmp working directory and places it as default in tmp.Today, I changed the working directory to Video, thinking this would be safe. Instead, the programme quit half-way through editing and I have now lost another good couple of hours.is there any way of saving my project?I can still see the .lay file but there doesn't seem to be any way of opening it.
View 7 Replies View RelatedI want to resume a fantastic old laptop from 1993, the "IBM THINKPAD X86 Model" with 130,544KB of RAM. I love to think a new life for that unused hardware. I have a working usb port (not functional as BOOT) and a working cdrom/dvd device ( not functional as BOOT too) but the NIC is dead and don't have the Floppydisc device. I have a windows2000 professional on it, with a working connection ADSL via modem USB.
- At first for resolve the BOOT problem i download wubi.exe: wubi dont find the internet connection (probably because it's via USB), and it cant download the ISO - I try the WUBI installation on offline mode, with the relative ISO ( the "Ubuntu 10.04.2 LTS (Lucid Lynx)" ):
the installation work but it's stop at the "verify of the system" and the system doesn't work, probably because that Distro of Ubuntu it's a Desktop version, and that need 256MB of RAM and the Thinkpad have less memory. I need to install xubuntu on this machine but on the wubi offline installation don not exist that ISO. I don't want to surrender, this machine MUST have a new life!
P.S: when i'll install the system, i want to open the laptop and restore and redesign the plastic and much more! and i'll want to insert all the project here...
I am trying to get a git repo up and running for a project. I currently am running git-daemon through xinetd, and can pull from the repo but not push back to it.
/etc/xinetd.d/git-daemon currently looks like this:
Code:
service git {
socket_type = stream
wait = no
user = gitman
group = gitman
server = /usr/bin/git-daemon
server_args = --inetd --reuseaddr --base-path=/home/gitman/root --export-all
--enable=receive-pack --verbose --syslog /home/gitman/root
log_on_failure += USERID }
And /var/log/messages looks like this:
Code:
Jun 15 15:25:14 dev1 xinetd[27922]: xinetd Version 2.3.14 started with libwrap
loadavg labeled-networking options compiled in.
Jun 15 15:25:14 dev1 xinetd[27922]: Started working: 1 available service
Jun 15 15:25:43 dev1 xinetd[27922]: START: git pid=27927 from=209.XXX.XXX.106
Jun 15 15:25:43 dev1 git-daemon[27927]: Extended attributes (22 bytes) exist
<host=dev1.aea.us.com>
Jun 15 15:25:43 dev1 git-daemon[27927]: Request receive-pack for '/EPA.git'
For some reason, the push request goes through, then stops and hangs. I went to lunch for an hour, and still nothing.
I have nearly completed a project.My team developed using C,shell scripts and qt.I would like to know how to package it as a .deb file??Also during installation,i want it to check for the existence of few packages in the system.If they are not there,i want it to download them using apt.
View 3 Replies View RelatedHow do I get the contents of .plan and .project files to show up using the finger command for regular users? As it stands with the setup I have in Fedora 12, only the user in question and the superuser can see them when they finger the user. Everyone else gets "no plan". I've tried chmod .plan o+rwx and chmod .plan a+rwx to no effect.ur.
View 1 Replies View RelatedI have two files fasta file and qual file and i need to run mira3.Is it possible to run the mira3 project without the .sff files.and if so where do i get the .sff files since i have only the fasta and qual files.
View 1 Replies View Relatedi am working on a project that requires updation after every 10 days that is after 10 days , i have to apply a new release. every time i need to copy all things from one path and paste it to different locations that is a manual work, i want to create a self extractor, in which i have to give only path, that is the path where i need to paste the files.
View 7 Replies View RelatedI have learned RHEL 5 recently and i m an engineering student, i want to make a project using RHEL 5, I have done mainly Servers.
View 2 Replies View Relatedwhat are the testing tools available to check the NS2 project.I have completed my network security project in network simulator for documentation i should submit testing report also. so i need to know any testing tools available for NS2 projects..
View 4 Replies View RelatedI have the joyous task of having to find and fix a bug in a large opensource project for an assignment. Fixing the bug should only take about 4 hours according to the lecturer. I would prefer the source language of the project to be Java, since my C++ is quite rusty.
So, does anyone have some experience in this type of thing, and can you give me advice about which projects would not be nasty to an ignorant student? Also, which tools did you use to make it easier for you? I want to learn how to do this,but I'm just a bit clueless at present.
I am trying to write a CMakeList.txt for a project (A). The project needs to use the library of another project (B). For gcc, using -L <path> -ldl works. How can I convert that into cmake file? I tried include_directories, that doesn't seem to work
View 3 Replies View RelatedI am trying to write my first small project with C++ - implement stl list like collection class. This is what i have a the moment:
Code:
#ifndef GUARD_link_list_h
#define GUARD_link_list_h
template <class T>
struct Node {
[code]....
I'm using ubuntu 9.04;I want to debug my project that comprises mutiple files.When I cd to the project folder and run the command "gdb rawusb_test",Once I tried the flag -g and changed the line "$(CC) -o $(PROG) $(OBJS) $(LIBS)" to "$(CC) -g -o $(PROG) $(OBJS) $(LIBS)", it didn't work!I want to trace the program "rawusb_test" line by line and see the parameters' values!Could you help me how I should debug this project or how the Makefile should be changed?
View 8 Replies View RelatedNow I have a project which include three directories /bin, /inc and /src. All of header files (*.h) are included in /inc and all of source(*.c) files are stored in /src, i.e. a.c, b.c, c.c..., the final generated executable file will locate in /bin. after compling with makefile, all of obj files will be generated in /src/obj like a.o, b.o, c.o, d....! Moreover an final.exe executable file will be generated in the /bin directory. Now if I want to debug it with GDB, how can I do it?
View 1 Replies View RelatedMy distribution of choice on my desktop is Arch Linux (I like getting all the new stuff before anyone else) but I am going to be making a home server, and I can't imagine Arch Linux working well for that because I want something stable and reliable. I always admired Debian for not only APT but it's reliability. I thought about using Ubuntu server but I don't like the direction Ubuntu is going, and I like Debian better anyway, so I am firmly set on using Debian for this server.
This server will be more advanced than necessary for a home user. The reason is because it's a learning experience. I want to learn all about DHCP, DNS, and all those other things. I'm already very knowledgeable on SSH and Unison, which will be the primary focus (backing up). So I was hoping I would list the things I decided to do and get some opinions/best practices from you guys.First, I decided on a Dell Inspiron 570. It's dirt cheap (around $280) and it has a gigabit network card. (I'm pretty sure). I need to stay as cheap as possible because money is a HUGE factor for me. I have a budget of under $700 to do all this. (So I may need to get smaller hard drives). Whatever default hard drive it comes with I will add two more hard drives in a RAID1 for /home. Like this:
Disk 1: Root, swap and boot partitions (smaller hard drive)
Disk 2 & 3: Dedicated to /home, on a RAID1 (two 2TB hard drives)
The idea is that once the server is all the way done, I will image Disk 1 with Clonezilla, and if it fails, just restore it. I personally don't feel that having RAID1 for the root partition is necessary when Clonezilla takes 20 minutes to restore a drive, or less. The OS and all configurations in /etc would automatically be backed up in that image.Since I'm using the server primarily for backups (there won't even be a monitor on it when done) /home will be on a RAID1 since that's the most important thing. (I have backups on external hard drives too, one is off-site, so still no worries). Also, the server will handle DNS for the hostnames on my four other computers, and I'm thinking of replacing my router and having my server do that too. Nothing wrong with my router, but it would be fun for me to set this up.