First of all add yourself to the www-data group - usermod -a -G www-data <your login> Then to the right side of the top panel, there should be a network icon in the notification area, right click on that and edit connections.Then goto DSL>add; enter your username and password and check "available to all users" if you're not in a multiuser environment, this is safe.
View 2 RepliesI want to configure my ADSL but I don't know what should I do. Can you explain me How can I configure it?(I use fc10, ethernet cable <Asus Am608 ADSL modem)
View 9 Replies View RelatedAt home, I have one pc and one laptop. The first one is working under Windows XP and connected to ADSL. The second one is under dual boot : xp and ubuntu. Some months ago, i've created an ad hoc network so that i can share the ADSL connexion with the laptop. When the laptop is working under XP, it works. But when i'm on ubuntu, the network is detected - i guess it is detected as a ad hoc network, cuz it's represented with two computers - but the ADSL is not shared. What do i need to change?
View 1 Replies View RelatedI just switched from windows to lucid lynx 10.4, but I am really frustrated because I have no idea about how to set up Internet (both adsl and wifi). I have checked the documentation and browsed for hours but the solutions out there never seem to apply to my case, so I beg for some personalized help on how to set up Internet. The only things I know are how to get to the terminal and that I am on an HP laptop. I beg you if you request information you give me a hand at how to find it, given my inexperienced level
View 3 Replies View Relatedi have a Conexant AccessRunner ADSL WAN USB Adapter and i want to switch from windows to ubuntu! i have installed along side windows and i don't know how can i get my ADSL adapter to work under ubuntu?
View 9 Replies View Relatedis there any problems with making adsl connection in ubuntu 10.10. Recently I've had ubuntu 10.04 and there was a problem with making adsl connectio so I was forced to you terminal in order to connect to internet. I'm asking you this because I'm planing to install Ubuntu again but if there is still connection problems then I wouldn't install ubuntu
View 5 Replies View RelatedAfter reinstall Ubuntu 10.04 LTS didn't recognize my ADSL router Billion 400 G.The Ethernet 1 led is off after booting.Search on web for help on this but no good results.You good people now are my last resort.I tried boot in live CD and result is the some.Check with sudo lshw.
View 9 Replies View Related1) I have an ADSL router for internet and RHL box sitting on the southside of the southside of the router with local IP configured.
I have to access the Linux box through the internet.
I have tried to port forward the SSH port on the ADSL router, that is not working.
I just configured my (dataone) ADSL connection and now it stops intermittently. Can anyone tell me why this happens and what is the solution for this.
View 1 Replies View RelatedI'm a beginner in Ubuntu, I'm using Ubuntu 9.10.
Currently using a Dlink GLB-802c router and using a ADSL connection. I try to connect to the Internet but it is unsuccessful. Ubuntu is not indicating my router when I connect to the PC.
My PC is P4 and using USB to connect to internet, PC haven't a Ethernet interface.
I'm using ubuntu 8.04 . Each time I return form suspend mode, the network icon in the right upper conner show a sign "!", which maybe mean there's limited network connection as in windwos. How can I solve this problem?
View 1 Replies View Relatedi cant connect to adsl with pon dsl-provider or any command line. just network manager applet GUI works for me. i follow this guide [URL] and try about 3 hours but without success. i edit /etc/network/interfaces following this thread: [URL] but after any alteration in /etc/network/interfaces and restart network my adsl connections are not work at all and also i lost my GUI applet connections too. then i have to back /etc/network/interfaces to its original content and restart my computer to restore my connections
pon dsl-provider error is:
Quote:
Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
I have an ADSL Internet connection with static IP.I connected through PPPOE from my modem to my ISP.I need to ssh from outside of my home to my home, But i don't know to use which connection between my computer and my modem.(dhcp ,static , bridge or ....)
View 1 Replies View Relatedi've installed debian lenny 5.0.4 in my hp laptop,using an officiel cd , i've installed ppp, pppoe, pppoeconf to configure an adsl connection (the dhcp is automatically configured on eth0)the trouble is : that ifconfig works fine, but when i want to connect it is impossible , this is my interfaces file:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
is possible to use linux (especially slackware) to bond 2 (ethernet modems) adsl connections. For example if i have 2 connection of 24mbs download and 512 upload i will create achieve 48 mgps dowload and 1 mgps upload . something like that
adsl1 modem <------ eth1--- (slackbox router) --- eth0---> my server
adsl2 modem <------ eth2----
I have an ADSL line that allows me for maximum of 4 concurrent users with external IP addreses. The IP addresses are not static (they change every 3-4days).
My current setup is as follows:
* A-link Roudrunner 44B Modem connected to the main line
* D-Link DI524 Router (port 1) connected to the modem
* This leaves me with 3 ports and Wireless for my other machines
What I wish to do is:
* Have all my machines with static IP addresses for LAN
* still have internet connection
I've tried enabling DHCP on the D-Dlink Router with LAN IP 192.168.0.1 and IP range from 192.168.0.100 - 192.168.0.199. Then gave my machine static IP 192.168.0.101, subnet 255.255.255.0 and gateway 192.168.0.1....obviously it didn't work. I've tried the above with both the modem being connected to the router via port1 and WAN port... but I have the same results. I also tried to do the same without the router (direct connection between the PC and modem) still got the same results. Could it be that what I am trying to do is not technically not possible due to my ISP setup to ensure no more than4 concurrent users limit is in place.
Q: How can I use at the same time two ADSL USB modems with pppd and pppoatm.so plugin?
I have the following scenario:
- Two ADSL USB modem correctly recognized by Linux.
- pppd configured with two different files, one for each ADSL (even if the two ADSL have the same parameters). Those files are /etc/ppp/peers/adsl1 and /etc/ppp/peers/adsl2
If I attach only one modem and then launch "pppd debug call adsl1" or "pppd debug call adsl2" everything works fine.
If instead I attach both modem in order to have two ppp interfaces, ppp0 and ppp1 I get the following behaviour:
- When launching "pppd debug call adsl1" the first modem connects correctly.
- When launching "pppd debug call adsl2" I get:
connect(8.35): Address already in use
That's because either adsl1 and adsl2 are trying to use the same modem.
So the question more specific question is: How can I specify which USB modem to use in pppoa ADSL connections?
With dialup modem it is possible to specify /dev/ttySx in peers files, but what about ADSL USB modems?
I have always been using one ADSL connection (ppp0) with squid.My question is, is it possible to add another ADSL connection to the same box.If yes how does the route works.Is it possible to switch to one ISP to another by just changing the route?
View 1 Replies View RelatedI want to get an adsl 1 internal pci modem card for my home server. Netcomm's NB100 seems to be the most readily available. Does anyone know if there are ubuntu drivers for it? If not can you suggest a card that does and is easy to get a hold of?
View 2 Replies View Relatednot *buntu related but what is the difference between an adsl router and an ethernet modem?
View 5 Replies View RelatedHow to organize in one server the Internet from two providers (ADSL) ?
View 1 Replies View RelatedI'm using ADSL connection as a way to access internet.All of us know that in windows we can get configed easily.But it is a little more difficult in Fedora.How can we config ADSL connection in Fedora 10?My modem uses dynamic ip.
View 14 Replies View RelatedI have an valid account,and I used pppoe-setup to set the dial correctly.After the configuration,I typed "ifup ppp0",nothing wrong happens(no news is good news?).Then I typed "pppoe-status",it said I've connected to the internet . I opened firefox,updated my system through yum ,they all said I haven't connected to the network!!!I've formated my harddisk and reinstall my system,but the problem is still.
View 4 Replies View RelatedI have an ADSL connection without a fixed IP address. Is there a clever way of finding it out so that I can log into a local IMAP server from the Internet without phoning up to ask for the IP address?
View 4 Replies View RelatedI have been successfully using my speedtouch usb 330 for years.
Now suddenly something weird occurs.I manage to stay connected a few minutes, afterwards the line drops down and I can't reconnect.
I switched the connection script to "verbose mode" and what I get is:
It seems that I can't get an answer from the provider, but if I reboot it connects at first attempts, but the connection falls down again after a few minutes.
I have dual boot. No similar problems is affecting the connection under Windows, so some hardware fault is ruled out as a possibility.
have a netopia 3347-02 Wireless ADSL Gateway that i got from at&t. i am no longer with at&t.i switch over to cox. I have the cox modem. i also have cable on the modem. when i connect a ethnet cable from cox's modem to my laptop my internet works. but i want to use the netopia 3347-02 Wireless ADSL Gateway that i got from at&t cause of the wifi. when i login & connect to the netopia 3347-02 Wireless ADSL Gaut it in bridge mode.internet works fine, but im not able to use wifi, im also not able to login into the admin page. i have to do a factory reset on it so i can log back in. So how can i make it work with cox modem?
View 4 Replies View RelatedI am new ubuntu user . I installed - ubuntu desktop v9.10 32bit. I have BSNL (Indian Telephone service) broadband connection. In Windows 7, BSNL broadband connection is working fine.
Now in ububtu I try to establish ADSL connection using following command: "sudo pppoeconf". It open a console based wizard and I'm able to create the connection. But this connection is sustain hardly 4~3 minute, after that it is disconnected. So, Again i have go through the same process again and again.
I use an ADSL connection which I 'dial' using the Network Manager. My laptop is connected to the modem through an ethernet cable.
The thing is the place where I stay is prone for power failure. So the modem goes out with the power. It comes back on within a minute when the power is restored but Network Manager doesn't seem to automatically re-establish the connection after it is lost once. I have to manually do it. Hence most of my downloads do not get done.
Does anyone have an opinion on the BELKIN F5Z0142uk Enhanced Wireless ADSL Router Network Kit, I want to setup a small home LAN and this kit caught my eye, it includes a usb Wi-Fi dongle for connectivity to a desktop computer, one of my pc's doesnt have a network card so this sounds like a good idea. Whats the build quality like and is it reliable. The link: [URL]
View 2 Replies View RelatedI am in China, where some web sites(....., facebook, etc) are blocked. So I have to access these blocked site by VPN. But how can I access blocked sites by VPN and unblocked sites by my direct ADSL?
View 2 Replies View Related