Ubuntu Installation :: Natty Dual Boot On Separate Hard Drives
May 29, 2011
I've been trying to properly install grub for the past 3 days and failing every time.I recently bought a new computer and would like to dual boot Windows 7 64 and Natty. On my previous machines, ubuntu installer has automatically detected windows. It does not do so on this machine.I have three hard drives: 2 ssd's and a single 3 tb drive for storage.
I would like one ssd for windows 7 and one for natty.Currently, I am able to boot into both OS's but only by altering the boot sequence of the drives from the bios. I am hesitant to install grub to the windows drive for fear I will lose the ability to boot into windows. I did this early in the discovery process and ended up having to reinstall windows.
View 9 Replies
ADVERTISEMENT
Dec 16, 2010
After I complete a big project I'm working on I'm going to be wiping and re-doing my desktop machine, probably in the next day or three. I'm going to be setting up a dual-boot; my first in about three years. I'll be using separate hard disks for this, and installing Slackware second on the bigger of the two drives. When I've done this in the past I've used Grub; Is there anything I need to know or pitfalls I need to avoid doing it with Lilo?
View 5 Replies
View Related
Oct 7, 2010
We were trying to install w7 on a reserved partition. W7 did not like the partition (whatever we tried).
Since we had 3 hard-drives, on the allocated drive we deleted all partitions and set the partition table type new to MSDOS (yast etc.....).
W7 installed fine. We did not time it, but it appeared that 11.3 installs faster plus considering 11.3 installs quite a number of applications.
There are plenty of postings re integrating W7 to the Grub-menu.
This system went through several Suse updates, hardware upgrades, basically was all over the place.... we did a "new" install of 11.3 allocating its own hard-drive.
Install......fine, and Grub entered W7 to the menu. Worked ! Mounted the windows partition to /home/yourusername/windows
So, if you really (?) need W7 and have a spare hard-drive, this maybe is a clean solution.
View 7 Replies
View Related
Jul 10, 2011
I am finding it hard to get 2 seperate hard drives to work each having different OS..... windows XP and Ubuntu 10.10. Making Ubuntu the master, it can recognise the drive but cannot boot from it. If XP is the master it does not recognise the Ubuntu drive at all.
View 3 Replies
View Related
Aug 25, 2011
I have been messing around with the ubuntu family for some time now, and usually have no problem finding my answers. This one, however, is giving me some trouble. I have been using ubuntu on my laptop for some time now, and recently got a new 2TB hard drive for my desktop. I cloned the old hard drive to the new one, and decided to install ubuntu onto a third drive. The third drive was IDE, the new one is SATA. I disconnected the other hard drive, and so my current set up is a SATA drive with Windows 7, and an IDE drive with Ubuntu (11.04 of course)
Well, I am unable to dual boot between the two, unfortunately, and would like to figure out how. I would like to say the problem is with Windows, since that is the primary drive. No GRUB shows up upon booting when both drives are plugged in, and the Windows Bootloader does not show my installation of Ubuntu, instead it goes right to Windows.
View 4 Replies
View Related
Jun 4, 2011
I have Ubuntu 11.04 on 1TB HDD and Win 7 on another 1TB HDD. Right now I have to unplug a SATA cable to get to boot into one or the other. What is the best way to be able to pick. I don't care which OS I do it in or which is the primary, if there has to be one. I have an MSI mobo.
View 2 Replies
View Related
Sep 16, 2015
I have an HP Elitebook 8540w with 500gb hdd running win7.I plan to replace my blue-ray drive with an ssd using a hhd caddy. The problem is that i want to keep my first hdd (win7) as it is, and install on the new ssd 2 operating systems:win10 and debian 8.
View 3 Replies
View Related
Feb 15, 2010
I finally have decided to give ubuntu a shot.Windows is becoming too familiar, and it's been forever since I have used command line since DOS.I really need some humility, and I think that Linux will teach me some.I am going to give it a whirl on a "spare" machine, dual booting with Windows 7 64 on two separate hard drives. I'm burning the ubuntu live cd x86 right now. I am going to unplug my windows drive and start the installation.
View 9 Replies
View Related
Jul 28, 2010
I would like to have 1 hard drive operate with Ubuntu 10.04 and another with Windows 7 Pro, with a proper boot selection menu when I boot up my computer.
View 5 Replies
View Related
Sep 29, 2010
I have Windows 7 x64 on a RAID0 Setup and have a separate 120GB Hard Drive and want to DualBoot with Ubuntu! How do I go by doing that seeing that LiveCD is not detecting Windows 7 Loader?
Twitpic : [URL]
View 3 Replies
View Related
May 1, 2010
this may be a very stupid question, but. My computer has two hard drives. One has Windows XP installed on it. The other is blank.
Is it possible for me to install Ubuntu onto the second hard drive, and run a dual-boot using GRUB during startup? Or does it only work when both OSs are on the same hard drive?
View 1 Replies
View Related
May 4, 2010
I would like to install Ubuntu 10.04 on my new 1 TB hard drive. I currently have Windows XP installed on a 160 GB hard drive for things that I cannot do on Ubuntu. I would like to know if it's possible to install the other hard drive, and then dual boot Windows with it? Effectively dual booting across two hard drives. I wouldn't care if GRUB replaces the standard Windows bootloader, just as long as I can choose between the two at startup
View 9 Replies
View Related
Jun 21, 2010
I'm a n00b at dual booting and I plan on installing Ubuntu 10.04 on a separate hard drive than my Windows 7 64 bit one in a dual boot situation. I have read that you can do this by unplugging the Windows hard drive, install Ubuntu on the other one, and than plug the Windows hard drive back in and everything will be fine and dandy. Is this correct? If it is, will I have to manually set the Primary and Secondary drive (in the BIOS I think?), or will it automatically do that.
View 6 Replies
View Related
Jun 17, 2010
I need a suggestion on setting up a dual boot menu for my setup. I have two hard drives one with WinXP and a second one with CentOS 5.3 installed. I basically moved the hard drive from another identical machine to this one and so I want to setup a boot menu to access either windows or Linux. CentOS already has grub on it.
What is the simplest method of setting up the dual boot menu? I would like something which is easy to administer which I can just ghost over either the Linux drive or Windows drive or disconnect either and have either boot just fine. I don't ask for much do I?
If I have to go through a little process after ghosting over one or the other drives that would probably be ok. We get updated images for this machine and replace the image on the drives with new images, although Linux shouldn't be reimaged, just windows. So the Linux drive (2nd drive) should not be touched normally.
View 9 Replies
View Related
Jan 25, 2011
I just bought a new Windows 7 machine and want to install Ubuntu 10.10 for a dual boot environment.There's a lot of info describing how to do this, but it all describes re-partioning the Windows drive, burning Ubuntu on a CD, inserting that CD, etc. I had a dual-boot Windows and Ubuntu machine that just died on me. Windows was on one hard drive and Ubuntu - along with my entire software development environment - was on the other. As far as I know both drives are fine.
When my new (Windows) machine gets here I want to open it up and stick in the Ubuntu hard drive from my old machine... but then I'm not sure what to do. I'd really like to be able to boot to that hard drive (or the Windows one), just like I did before. It seems that this should be simpler than installing a fresh Ubuntu from a special CD, after all, everything is already expanded and working on the hard drive. Can someone give me some pointers that will help me solve this problem?
View 3 Replies
View Related
Feb 9, 2009
i'm tying to dual boot Vista64 (already installed) and Fedora 10 x86_64. I am running a Dell XPS 410 running 2 sata hard drives raid 0 (ICH8DH). I started the process by shrinking my C drive on disk0 leaving 64.45GB of unallocated space. Next I rebooted into Fedora install DVD and when i get to blue graphical install screen i get message asking if my drive is GPT and if it is it may be corrupted. I click NO, and it comes up with a message telling me i have to initialize my drive if i want to use it ( have to click NO twice) and if i do it i will lose all my data.
i can click no and keep proceding through the install until i get to the partition setup screen. No hard drives or partitions are shown. I've tried googling the problem and get bits of pieces of information scattered in different parts but nothing conclusive to my problem i think. As far as my background of knowledge goes, I'm new to the linux community but give me a thorough guide and i'll do fine (i hope). I've been using fedora on a separate laptop for 2 days now .
View 9 Replies
View Related
May 31, 2010
I have tried (a few times now lol) to get this setup. I am using Windows 7 64-bit and Ubuntu 10.4 64-bit. I have Windows 7 installed on one hdd, another hdd has the System Reserved partition along with a data partition for files, the third hdd is the one where I want to install Ubuntu. I have found numerous tutorials on installing them both on the same drive, but not on separate ones. The couple I have found haven't really worked.
I think that Ubuntu is installed correctly but there is no option to boot into it. Windows 7 just happily loads itself. I have tried reinstalling and selecting 'sdc1' (the native ubuntu partition) as the location for the bootloader to be installed and then used Easy BCD to add that location to the windows bootloader which gives the option to load Ubuntu but when selected dies complaining that there is a missing file (I think it just can't find the Ubuntu bootloader).
As an aside when I get to the installation screen the Ubuntu installer keeps on telling me that there are no operating systems detected on the machine (Even though I'm pretty sure the drive it is talking about 'sda' is where Windows 7 is installed). Not sure if that matters just seemed a little wierd.
View 7 Replies
View Related
Mar 4, 2011
I am using an Abit NF7-S V2 mobo to set up my dual boot system where each OS (XP & Ubuntu) will run on a totally separate HD (as opposed to both OS�s being set up on one HD). Since they will be running as stand alone boot drives, how does one set it all up so that one can boot from one or the other? I don�t see how I can do it from the bios. How do I do it?
View 2 Replies
View Related
Mar 26, 2011
I am building a home server that will host a multitude of files; from mp3s to ebooks to FEA software and files. I don't know if RAID is the right thing for me. This server will have all the files that I have accumulated over the years and if the drive fails than I will be S.O.L. I have seen discussions where someone has RAID 1 setup but they don't have their drives internally (to the case), they bought 2 separate external hard drives with eSata to minimize an electrical failure to the drives. (I guess this is a good idea)I have also read about having one drive then using a second to rsync data every week. I planned on purchasing 2 enterprise hard drives of 500 MB to 1 GB but I don't have any experience with how I should handle my data
View 10 Replies
View Related
May 23, 2010
I have 3 hard drives: one with vista installed on it working fine, one with 10.04 installed on it and working fine and the last is just a media storage drive. Currently I have been unplugging the windows or ubuntu drive depending on which OS I want to boot. What do I need to do so that I don't have to physically disconnect the drives and can just pick which OS to boot on power up?
View 3 Replies
View Related
Nov 23, 2010
I just started working with Linux over the weekend. I do have a working dual booting system but it's not configured exactly how I want it to be. Currently Windows 7 Ultimate and Ubuntu are on the same hard drive but different partitions. The Windows boot screen comes up and I can select Windows or Ubuntu fine. Grub comes up when I select Ubuntu and I can successfully select any choice in the menu and it will run properly.
Everything works great now so you may wonder why I even want to keep tinkering, well, it's not working how I want it to. This is what I want it to do. I want Windows 7 on disk 0 and Ubuntu on disk 1. I want each OS to have it's own hard drive. I want Grub to be the only boot loader that comes up with the option to select Ubuntu or Windows. I want to skip the window's OS selection screen all together. I can modify Grub, I've already done some of that on my work computer.
I've been installing from windows. Should I use a CD instead? Would that accomplish my goals without doing anything special?
View 3 Replies
View Related
Jun 25, 2010
Ok so first off my hardware Asrock 775dual-vsta Master and Slave hard drives on primary IDE Absolute Linux 2.6.33.3 ; Dos 7.1 (yes Dos 7.1 by itself no windows whatsoever) Absolute Linux=sda1 ; Dos=sdb1
Ok so I can't boot into dos from lilo boot menu. It boots fine however if I tell the bios to boot from the second HDD first (DOS). But it's inconvenient to tell the bios every time on power-up to choose the second hard drive as the first boot device. Here is my lilo.conf boot section
# Linux bootable partition config begins
image = /boot/bzImage
initrd = /boot/initrd.gz
root = /dev/sda1
[Code]...
Either way when I boot from the first hard drive (linux hard drive) and lilo pops up, I select dos and hit enter then nothing... It just sits there and ctrl-alt-delete can't reboot my comp as it's frozen.
I don't wanna have to tell the bios to select my dos hard drive as my primary boot device everytime I wanna boot dos. I wan't my linux hard drive to be my primary boot device and have my dos hard drive selectable from the lilo boot menu. Why can't I do that? What am I doing wrong? I thought this was easier than dual booting from a single hard drive?
View 5 Replies
View Related
Feb 28, 2011
I am new to Linux and was wondering how to make dual booting Windows and Ubuntu from 2 separate drives work. I have dual booted from the same drive but never different ones. If I install Ubuntu on the second drive how will I configure the system to let me choose on start up?
View 3 Replies
View Related
Jun 15, 2010
I have 2 sata HDD, I wish to dual boot, but in a way to have Windows on one and Ubuntu on the other.
For some reason I could not get Ubuntu (10.04) to install from the live CD or Wubi or from Windows on the same HDD.
I downloaded the advanced distro and went with that straight onto the HDD and it has been a gem (love how it just works with no drama).
I want to install windows XP again on the 2nd HDD, as there is one game that I play in windows. (I've got it to work in Wine I just don't like / can't get used to it)
My Question is: installing windows on a 2nd HDD and then being able to choose which one to boot.
I've read about installing Windows after Linux in the user guide and reinstalling grub2 - I got the impression though, the they were installed on the same HDD and thought that what I want to achieve may differ?
View 2 Replies
View Related
Aug 5, 2011
I have searched for this but can not find it. I want to install debian 6.0 squeeze on to both of my hard drives and run each as a seperate instance of debian, and be able to choose at boot up which one I want to run. I have an HP with 2 500 gig hard drives, running windows vista currently, processor is an intell quad 2 core 6600, nothing else on the pc for programs and such at this time. I would also like to keep the windows if possible to run other programs at a later time.
View 10 Replies
View Related
Oct 25, 2010
I'm 'trying' to dual boot WinXP and Ubuntu 10.10 from 2 separate HDD's. Currently I'm on attempt number 6 but my patience wore thin about 2 days ago - here's the current state of play: I have WinXP running fine (Was installed first) and I have Ubuntu running fine if I use a boot loader disc. I don't have any boot options at all - if I let the PC boot naturally then it just loads XP as normal. I followed this guide to the letter: [URL]
(For those that don't want to read the link: It get's you to create 4 partitions on a drive - 1: ntfs for winxp (not touched) 2: Linux partition 3: linux-swap partition 4: fat32 osshare partition) then if you get no boot options, it creates an ubuntu.bin file which you move to the C: and edit the boot.ini to include it in the options). But all the difference it makes is I get boot options, I press Ubuntu and my computer sits with a blinking cursor for as long as you let it.
View 3 Replies
View Related
Dec 10, 2010
recently sent up another computer as follows:Two sata drives. Windows 7 was installed on the first drive(sda)and booted successfully. This drive was disconnected ( I have had some installs where Unbuntu wipes out the existing C drive eventhough I am installing to D) and Ubuntu was installed to the second drive (sdb). At one point I had to rebuild the grup on the Ubuntu drive and was careful to make it installed on the Ubuntu drive. To my surprise when the PC booted up I saw the Grub menu with a menu entry for Windows. The Windows drive was always the primary drive before the Ubuntu install. I was planning on the Windows drive being the boot drive and using a boot manager to determine where to go from there. If I utilize the BIOS boot option (F12) I can boot each drive individually. I cannot in BIOS set a particular drive to boot - just a hard drive. Everything is working I am just curious why the primary drive does not boot first. IN BIOS the Windows drive is a primary SATA with a lower number that the Ubuntu drive which is listed as a secondary drive.
View 4 Replies
View Related
Feb 15, 2011
I can only use the Live CD to operate Ubuntu. After typing in the command sudo fdisk -l, I get the following?
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code]....
And when I boot without the Live CD, I get the following message in the GNU GRUB Version 1.98-1ubuntu7 window page.
View 9 Replies
View Related
Aug 9, 2011
I've been using ubuntu exclusively on my two laptops lately, for coding and all of my other work. I plan on installing it onto my desktop now for work as well, but I would like to retain Windows 7 so I don't have to worry about compatibility for all of the games I love to play. My question is this:When setting up my partitions, how much space (and what format) should I set aside for windows to write and read games from? I have a 500GB hard drive currently, and was planning the partitions as:
1. Windows 7 (NTFS, setup with Windows installer) ~20 GB
2. File Storage (NTFS, set up with the Ubuntu install partitioner) ~452 GB
3. Ubuntu (EXT3, set up with Ubuntu install partitioner) ~ 20 GB
4. Swap (~2x the size of my RAM) ~ 8GB
The plan is to have Windows install and execute games from the NTFS File Storage partition, while being able to access the same partition from Ubuntu for my documents, code files, music, etc.I don't know if this would work, and I'm also not sure what my file system will be like (windows or linux-y?) if it did. Will this work? Or is there a more elegant solution?
View 7 Replies
View Related
Mar 8, 2011
I am trying to install ubuntu 10.10 and windows 7 on my hard drive. I want to install both the OS on seperate drives. can anyone tell how to do it? I know that there are screenshots on ubunutu site itself but i am new to ubuntu and I am unable to follow instructions.
I first installed ubuntu 10.10 in dec 2010 using my ubuntu dvd. Now I am reinstalling it again but the setup screens have changed? hows that possible? i mean its the same disk. does anyone know why? or am i drunk.
View 4 Replies
View Related
