After login-in with gdm, the desktop fails to launch.
I can only move the mouse, clicking does nothing, no hotkeys; no desktop.
All I can do is change to a TTY.
I have tried restarting the gdm service; this just lets me log in again to the same stalled desktop.
The panel at the bottom of the gdm doesn't list any sessions, all it has is universal access and the time.
I installed 10.04 on my pc. I also have 9.08 and XP installed. Both work. The 10.04 gui login screen displays and asks for the password. I enter the password. The screen goes blank but after a few seconds the gui login box re appears and again asks for a login. I rebooted into the TTY, created a new user, checked the new user was in in /etc/passwd and that I could get into the new user's account. When I rebooted into the gui the new user was there and I entered the password but again I just got back to the gui login window. The pc I am using is at least 5 years old. I have tried startx and I do get the gui background but no controls are displayed. I am using 32 bit 10.04. Using the TTY I have uploaded all the current fixes.
View 3 Replies View RelatedDebian 8/Cinnamon fresh install. /home is being shared with two other OS's, Mint and openSUSE. At the login screen I enter my user name and password and the screen blacks for 1-2 seconds and comes back asking for user name and password. I can login as root. As root I can launch the Group & Users GUI and attempt to set the user's password, and pressing the 'change' button does nothing obvious.
I can set the user's password in a terminal, which reports success. I tried to switch users and login with the changed password and I get the same failure. If I try to login with the original password I get an incorrect password error, suggesting that the password is being processed properly and the problem is elsewhere.
On previous installs with Mate and the default desktop (Gnome) I didn't have this problem. So, the questions are: Is it Cinnamon? Is it an unlucky chance bad install? Config files are typically in /home, which is being shared with Mate and KDE, is this the problem?
Fresh install of Fedora 11 x86_64, ext4 file system, Intel Quad, 1 Tb disk
Went through install, defined mike as user with password
reboot, get graphic login (init 5); cannot login as mike OR AS ROOT!! (unable to authenticate)
use live cd, reset inittab to start at level 3
reboot, get user prompt on terminal at level 3
enter mike and password, system wait a minute or more, returns to login prompt (obviously timing out --- dbus problem???)
enter root and password, get in, issue startx
open terminal window, and issue "su mike" command, ten minutes later, finally get terminal with mike as user.
Use ctrl-alt-F2 to get a terminal, type mike, and password, no joy; login as root and type "su mike". Go back to Gnome screen at F7, so I can continue to type this , and check back at F2 periodically to see if "su mike" ever takes. After three minutes, still no joy. After five minutes, it worked. whoami shows "mike"
I'm running a fresh install of Ubuntu 10.10. Sometimes, on attempting to login, the screen resets and I'm brought back to the login screen (though I know I have the right login information). The only way around is to restart. Also, sometimes when I do finally get in, my taskbars won't even appear.The machine is an HP workstation x1100 with Pentium 4 and fairly old graphics card (using AGP). Is the computer just not compatible with linux?
View 1 Replies View RelatedI did a fresh install of the netbook version of 10.10 on a Gateway CX2618. I ran all updates and then rebooted. I installed LWO 5.4 from the repository and joined the domain. I put in a kerberos realm (same as my domain) but I don't know for sure if I have a kerberos realm. I successfully joined the domain with the GUI. I rebooted, per instructions.
I tried to login with domain username and password (DOMAINusername). It takes a couple seconds to think and then kicks me right back to the GDM login screen. I have tried several times with the same login and have tried other domain users. It doesn't say "authentication failure" but I should have tried to use the wrong password to see if it would do the same.
I'm stumped. Is there a ppa I need to add? Is Likewise-Open supposed to work with the maverick netbook edition. I saw the previous notice on the Likewise site about OpenLDAP but I thought that was resolved in the updates and no longer in effect. Should I install LWO 6.0? If so, from where? From a ppa somewhere? From the Likewise site?
I can still login with a local admin account.
My ultimate goal is to automatically mount network windows shares for various students, based on their login credentials and using CIFS. I almost had this figured out before this fresh install.
After changing my user's UID number with the "usermod -u" command or otherwise changing the login settings my computer no longer logs in automatically. I can login manually by selecting the "Other" option and manually typing in my user-name and password. However my user-name is gone from the list of users at the login screen or in the Login Screen Settings program.
Other than that my computer seems to function fine. My users details are still listed in "User settings".
I've been running xubuntu for a few weeks now, but just today I began having a few problems. When I boot my computer, it simply freezes at the xubuntu logo just before the login screen.
The last thing I remember doing before this is typing export DISPLAY=:0.0 in the tty1 terminal.
Basically, the problem is, we have a bunch of computers in a computer lab, that we want to students to access, but not modify in ANY way. That includes backgrounds or whatnot. And after restart, any changes they may have made, change back. Also, they can't have read access to the administrator account on the computer.
This needs to give a permission denied, or something:
Code:
cd /home/(admin account username)
ls
The Guest Session is exactly what we are looking for, but try as I might, I can't get it to work. Because, we don't want to have to login as administrators, then activate guest session, just for our students to use the computers. The idea being, we can leave the computers in there, and not worry about the students breaking anything.
One thread I tried was: [URL]. However, using his method, will log the student into the account, and after about 5 seconds, log them back out.
The other method listed lower in the thread,
Code:
/usr/bin/guest-session
Seems to work, but upon logging out, fails to launch the gdm
Only way to restore is restarting the computer.
I joined my Ubuntu 1004 LST to Windows 2003 AD.
it always frozen my ssh login window when the DC crashes. when the DC crashes, the putty won't give me the password prompt and will go inactive directly after a while no matter what username(local or domain users) I give
is it possible to avoid to check domain users before it gives me the password prompt? or, we can make it to check if the user is a local user first?
I have SUSE installed and i want dvi display but i dont have any idea why X fails I tried changing xorg.conf file tried modifying it but of no use If i use both dvi and vga display comes on both the monitors but on dvi diaplay goes off at login screen after gdm comes up
View 3 Replies View RelatedI rsync-ed root fs as a whole to another hard drive. In grub.conf I changed kernel option
root=/dev/sda1 ---> root=/dev/sdb
After kernel mounted root filesystem on the new hdd and all services started I successfully got prompt to enter login and password. However after login I immediatelly logout automatically. Here is /var/log/secure output:
Quote:
May 20 23:53:18 localhost login: pam_unix(login:session): session opened for user alex by alex(uid=0)
May 20 23:53:18 localhost login: LOGIN ON tty2 BY alex
May 20 23:53:18 localhost login: pam_unix(login:session): session closed for user alex
What is printed before this:
Quote:
May 20 23:50:47 localhost pam: gdm-password[1469]: gkr-pam: couldn't run gnome-keyring-daemon: Access denied
May 20 23:50:47 localhost pam: gdm-password[1455]: gkr-pam: gnome-keyring-daemon didn't start properly properly
Neither of these quotes appears if the initial file system (not rsync-ed) is used as root fs. I guess that pam might use information of hard drive, for example, its serial number, and login is tied to a disk. Please, give me a suggestion how to get rid of automatic logout.
I m try to explain the structure I tried to use here:Symptoms: Describes what is happening right now What happened: Describes the history leading to the problem My tries so far: Describes, what I did (so far in vain) to clean up the problem Questions: I already searched the forum (see "My tries so far") but missed to write down the URLs for the threads. (So they aren't mentioned under "My tries so far")
Symptoms: The system boots up ok, I get to the KDE login, but for both my user account and the root account, the login fails. After entering username and password a progressbar comes up. This gets to 3/4 (if I counted the steps correctly) then stops. If I wait for several minutes, the screen will finally just turn black. (It is *not* switched to suspend or somesuch by DPMS; I didn't wait for that turning black in all tries described below) I can login on a console into the system.
System Intel CPU Core2, E6750 Suse 11.4, 64 Bit (both original and backup system) Kernel: Linux 2.6.37.1-1.2-desktop x86_64 (backup system) / vmlinuz-2.6.37.6-0.5-desktop (original system) KDE: 4.6.00 (4.6.0) "release 6" (on the the backup system, because I don't know how it get the info as long as I can't login to KDE)
[Code]....
I know it's possible i did it once but i can't do it again...
I wanna try to fix the GRUB or whatever the problem is. The error messages after login are: Nautilus can't be used & the panel encountered a fatal error.
I use Ubuntu 10.04 LTS.
I was compiling an application called Audacious. One of the dependent packages I needed to obtain was called Glib. After installing Glib (and a package it also required), my GNOME began failing and after rebooting the computer, the login GNOME login screen fails to displaying. Does anyone know what's gone wrong?
[URL]
Now after installing Glib, restart your computer and your GNOME will have failed. Why the F did this happen?
Today I upgraded my system to the Nvidia driver 340.93 and 4.2.0-1 kernel on Debian Stretch.
While I wait for the gnome login screen to pop up I get the "Oh no something has gone wrong" message.
When I log in from another terminal and execute startx , gnome initiates and starts although settings like my resolution and other xserver settings are not loaded.
From the journalctl I believe the error is located in the following section:
Code: Select allOct 06 14:23:17 DEBIAN-PC org.a11y.atspi.Registry[1692]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Oct 06 14:23:17 DEBIAN-PC gnome-session[1680]: X Error of failed request: BadValue (integer parameter out of range for operation)
Oct 06 14:23:17 DEBIAN-PC gnome-session[1680]: Major opcode of failed request: 154 (GLX)
[Code] ....
I reinstalled the xorg-xserver and the nvidia drivers and I get the same behavior.
Looking for some info in order to reconfigure the gnome-session to work?
When we try to login using KDE we get the following error
"kstartupconfig4 does not exist or fails. The error code is 3. Check"
If we use IceWM GUI login works fine.
I can't log into my normal user account at bootup; it just bounces back to the login screen.
However, I can log into the user's terminal window from the root account.
I've tried deleting and re-creating the user, but to no avail.
Is there some special file that I could delete before re-creating the user?
The one that holds the (corrupted) authentication data, perhaps?
I have a problem that I can't login to SUSE in graphical mode. I get to the login prompt; enter my username and password; SUSE starts to do the login but then crashes back to the login prompt. Looking in /var/log/messages doesn't tell me anything useful. However, I noticed that my SUSE system partition is full (at 20 GB). So I think this is the culprit that is stopping my login.
Unfortunately, I can't extend my system partition as it is ext4 (SUSE default) but parted (from SUSE 11.2 live cd) complains that it can't do anything with ext4.
I'm using
OpenSUSE11.2 x86_64
KDE 4.3.5
Linux 2.6.31.14-0.1-desktop
I'm following [URL] to build a mail server running postfix virtual. The server is now running able to send and receive mails. But remote mail client 'Evolution' can't login the server to send/receive mails.
# tail /var/log/mail.log
Code:
Nov 17 09:00:32 xen05 postfix/smtpd[6601]: warning: xen0.satimis.com[192.168.0.110]: SASL PLAIN authentication failed: authentication failure
Nov 17 09:00:48 xen05 postfix/smtpd[6601]: warning: SASL authentication problem: unable to open Berkeley db /etc/sasldb2: No such file or directory
Nov 17 09:00:48 xen05 last message repeated 3 times
Nov 17 09:00:48 xen05 postfix/smtpd[6601]: warning: SASL authentication failure: Password verification failed .....
Still fail: "Login authentication" and "plain authentication" same result.
I have a Dell precision 380 (system specs can be found here: [URL]. My system is set-up in dual boot configuration with Windows Xp x64 on one side of my HD and CentOS 5.3 (64bit) on the other. My system came with 2Gb (2 x 1Gb) of RAM and I recently wanted to upgrade. I bought 2 x 2Gb ELIXER DDR2 667Mhz RAM. I carefully added the new sticks to my motherboard, booted up windows via bios which noticed the new RAM was present. All seemed well.
However, on rebooting the system and entering the CentOS boot phase, after the boot phase (eg starting program... [ok] etc) but before the login screen my screen goes black / blank. My system has an ATI FireGL v3100 graphics card, I checked out the technical info on this and it should be ok on 64 bit linux. (See: [URL])
[Code]....
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
[Code]....
I got a workstation with openSuse 10.3 pre-installed. After I did the Online Update from YaST2 and rebooted the machine as requested by YaST2, the system came to fail starting up an X session.
Below are excerpts of the message appeared on the screen at the end of the boot process. (I transcripted it from the screen by hand.)
Code:
Waiting for mandatory devices: eth1 __NSC__
10 9 8 7 5 4 3 2 1
eth1 devices: Intel Corporation 82573L Gigabit Ethernet Controller
eth1 DHCP4 client (dhcpcd) is running
[Code].....
what is causing the failure of the X session and how to fix the problem? I would be glad if you give me any hints or pointers.
On startup my machine (a PC a few years old with recent Fedora 13 clean install) seems to be OK until it tries to get to the Login GUI, where it stalls at the f/infinity Fedora logo. The last things I did before shutting down my computer last were uninstalling the mail client Evolution via the GUI package manager and downloading a torrent. Could these have effected such a stuff up? I'm not altogether clear on logging in via a terminal.
View 4 Replies View RelatedI have used Ubuntu since 7-4; I now have 10.4. However, in the last week I have been taken to the login screen three times. This could be potentially calamitous. Ctrl+Alt +Backspace have by default been disable since 9-4. There is no way I am pressing atl+Prtscr +K. I wonder if there is a new zap command in 10.4, and if so, how to disable it. I have never found the need to go back back to the login window. I am generally using the command line when doing this.
View 1 Replies View RelatedI don't what happened but yesterday I was working normally and then I shutdown the computer, today when I opened ubuntu it took me to tyy1 login screen, I entered my username and password then it took me to the normal login screen with the login drums sound and it wrote on my account (logged in) so I clicked it and I entered my password again and then I got to my ubuntu so what went wrong and how to fix it also I noticed that a new terminal in system tools occurred called Kernel (I didn't add it)
I'm using ubuntu 10.10 on Dell inspiron 1520 with Nvidia 8600GT and 3GB RAM
Important: this happened after update to generic-headers-24
I have just did an upgrade from 9.04 to 9.10. I am planning to go to 10.04 . After the upgrade everything was ok but I noticed the GRUB was still legacy. So I updated my GRUB to GRUB2. Now when I boot, after entering my logon-id and password, it just brings me back to the login-id screen (to logon on). Any indication of what is wrong and how I should fix this ?
I have no encryptions. [added comments] Currently reading thread about login loop bug with 9.10 Followed instructions about possible missing pre-release update but even if it did do updates, I am still login screen looping. Doing additional researches until someone answers with the fix.
did :
CTRL + ALT + F1 switch to one virtual console
sudo service gdm stop
[Code]...
yesterday I updated my fedora 13 to fedora 14 (on laptop) and today i cannot log in on user. It just go blank for a sec and is back to login.
At text console (alt+ctr+f2/f3) i enter my username and pass it give this for a sec and resets (clean) console
username: Name
password:
last used: [date]
login: no shell permission denied
i used unetbootin (fedora 14 netinstall to update) and later i updated 1,5G before reboot (did update that fix, forgot its name tho :s)
I would most likely reinstall everything, but i have some work at laptop and as death-line is near, i would prefer to fix it if possible.
edited:
i have installed F13 on unused space, is there a way for me to access and fix it? or at least get some files from there?
I tried to install 64bit 10.04 Release Candidate but it fails every time. I have been using 64bit 9.10 Karmic on this computer so it's suitable for installation.
I tried to install from USB stick and from CD but same error at the same point! It fails just befere it starts to ask your locations etc...
There must be something totally wrong on installer. Checksums are ok etc...
Errors seen with CD and USB stick installation: Pop up: "Istalltion failed The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again."
On command line I can see following error message on CD:
These errors with USB stick:
I recently decided to install ubuntu netbook remix 10.10 to my Toshiba NB200. I was using windows and I wanted to completely erase them. I burned the USB, I followed every single instruction the site had, and even though the installation seemed to work, and a message to reboot my computer appeared at the end, the installation finally fails. When I reboot, the only thing I get is a black screen with an underscore at the top left corner. I tried the installation four to six times and even tried older versions as well but all I get is the black screen.
View 9 Replies View Related