I've been running xubuntu for a few weeks now, but just today I began having a few problems. When I boot my computer, it simply freezes at the xubuntu logo just before the login screen.
The last thing I remember doing before this is typing export DISPLAY=:0.0 in the tty1 terminal.
i have installed xubuntu desktop on my Ubuntu PC. But now the login screen and the bootsplash screen are showing Xubuntu logo etc . How do I fix this?
View 3 Replies View RelatedI just installed Xubuntu 11.04 and all of a sudden I got a brown screen when I logged in that made my desktop unvisible (everything else worked fine). After a while I understood it was a problem with nautilus which I installed because I thought I needed to for Dropbox. So this is what I did and it worked:
Code:
sudo apt-get purge nautilus
I set login automatically in the login screen in the systems menu. but on after every boot it shows the login screen many times even after a correct login, and sometimes it doesn't show. I already updated my system so what should I do so that no more login screens after boot?
View 8 Replies View Relatedi installed Xubuntu desktop and decided i didn't like and uninstalled it.. but it hijacked my boot screen and login/logout screen. i restored the boot screen but i can't find out how to restore the login/logout screen.
View 9 Replies View RelatedI installed Xubuntu 10.04 on my Dell laptop earlier, and all went well until I tried to finally login. A dull black screen is presented (I don't know if that's normal; I expected a pleasant splash screen haha). As a windows user, I can only explain it as looking like a command prompt. The first line asks me for my login (which is my first name). I type it in, press enter, and then it asks me for my password. The problem is, no matter what I press, nothing happens after that.
View 6 Replies View RelatedWhen I start up my computer Xubuntu is asking me to login (which is strange as I have login disabled). Then, when I do enter my password, it is accepted and after a few screen changes I am returned to the login screen. (I know the password is correct as the login screen informs you immediately if you enter it incorrectly.) Also, I can see that my display settings have been changed--the monitor resolution is wrong--my cursor is way big as are buttons, text etc..
View 3 Replies View RelatedI had been using Xubuntu 9.10 successfully for some time. Recently, however, I tried to boot Xubuntu, and instead of reaching the login screen, a "GRUB" interface appeared. The title was "GNU GRUB VERSION 1.97~beta4"
Below that, there were a few instructions describing the use of the Tab key and a blank command line interface beginning with "sh:grub7". Before this started occurring, my computer would turn on and then display a menu to choose the OS. If I selected Xubuntu, a few lines would flash by, and the login screen would appear. My computer is a Dell XPS M1530 laptop. The operating systems installed are Windows Vista Ultimate and Xubuntu 9.10. The Xubuntu was installed using a Wubi installation.
As far as I remember, I did not make any changes that may have caused this. The only significant event that did occur was a power outage, but my computer was not plugged in nor on at this time.
If everything works normally, how would I boot Wubi Xubuntu from the GRUB interface? Are there any other solutions to this problem?
been using 11.2 with KDE on a Sony laptop since 11.2 was released always ran perfect suddenly I can't login, I get to the login screen type in password it begins to load my desktop, then fails and dumps me back to the login screen I can login as root, all my stuff is there (under /home/me) I tried changing my password, no luck I went to run level 3 and there I can login just fine seems to be something with my KDE profile
any ideas where I might find some error messages telling me what's going on?
this seemed to happen when I was running "blender" and making the machine do some heavy number crunching, it actually locked up.
I'm currently using Fedora 12 GNOME (64bit Version) on my Lenovo T500 Laptop. The system, until today had no issues in booting up. Now it seems that it can't load the log-in screen.The system boots up, past the grub screen and as the Fedora Logo is loading, flashes a few time ans hangs right after the atd service is loaded.The screen flickers 3 or 4 times and the the CLI stops loading. I've left it on for an hour, hoping that it loads but it still hangs up. I've tried loading in interactive mode and disabling atd but Fedora still flashes a few times and hangs after loading everything else
View 2 Replies View RelatedI have SUSE installed and i want dvi display but i dont have any idea why X fails I tried changing xorg.conf file tried modifying it but of no use If i use both dvi and vga display comes on both the monitors but on dvi diaplay goes off at login screen after gdm comes up
View 3 Replies View RelatedBasically, the problem is, we have a bunch of computers in a computer lab, that we want to students to access, but not modify in ANY way. That includes backgrounds or whatnot. And after restart, any changes they may have made, change back. Also, they can't have read access to the administrator account on the computer.
This needs to give a permission denied, or something:
Code:
cd /home/(admin account username)
ls
The Guest Session is exactly what we are looking for, but try as I might, I can't get it to work. Because, we don't want to have to login as administrators, then activate guest session, just for our students to use the computers. The idea being, we can leave the computers in there, and not worry about the students breaking anything.
One thread I tried was: [URL]. However, using his method, will log the student into the account, and after about 5 seconds, log them back out.
The other method listed lower in the thread,
Code:
/usr/bin/guest-session
Seems to work, but upon logging out, fails to launch the gdm
Only way to restore is restarting the computer.
I've been using fedora now for a while without major problems - since yesterday. Last night i rebooted my computer and to my surprise, this is what happened:
The Fedora screen takes a little bit longer to load and after that, instead of showing the login screen, i get a black screen with a prompt blinking. I can log in on text mode pressing alt+f2 alright. Tried "startx", but that did nothing for me, i only get a backtrack list and a "fatal server error: Caught signal 11 (Segmentation fault). Server aborting. There's also something about checking the log file at "/var/log/Xorg.0.log" but when i try to open it i get a Permission denied message.
I use Ubuntu 10.04 LTS.
I was compiling an application called Audacious. One of the dependent packages I needed to obtain was called Glib. After installing Glib (and a package it also required), my GNOME began failing and after rebooting the computer, the login GNOME login screen fails to displaying. Does anyone know what's gone wrong?
[URL]
Now after installing Glib, restart your computer and your GNOME will have failed. Why the F did this happen?
I'm running Ubuntu 11.04, using an nVidia graphics card. I have my TV hooked up to my computer and acting as a second monitor, using the Twinview option with the gpu. My monitor is set as the primary display, with the TV as secondary.
The problem I'm having is that when I turn my computer on, the main display is black, and all the load up information is output to the second display. Then, when I get to the log in screen, it is also on the second display.
Today I upgraded my system to the Nvidia driver 340.93 and 4.2.0-1 kernel on Debian Stretch.
While I wait for the gnome login screen to pop up I get the "Oh no something has gone wrong" message.
When I log in from another terminal and execute startx , gnome initiates and starts although settings like my resolution and other xserver settings are not loaded.
From the journalctl I believe the error is located in the following section:
Code: Select allOct 06 14:23:17 DEBIAN-PC org.a11y.atspi.Registry[1692]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Oct 06 14:23:17 DEBIAN-PC gnome-session[1680]: X Error of failed request: BadValue (integer parameter out of range for operation)
Oct 06 14:23:17 DEBIAN-PC gnome-session[1680]: Major opcode of failed request: 154 (GLX)
[Code] ....
I reinstalled the xorg-xserver and the nvidia drivers and I get the same behavior.
Looking for some info in order to reconfigure the gnome-session to work?
I have a Dell precision 380 (system specs can be found here: [URL]. My system is set-up in dual boot configuration with Windows Xp x64 on one side of my HD and CentOS 5.3 (64bit) on the other. My system came with 2Gb (2 x 1Gb) of RAM and I recently wanted to upgrade. I bought 2 x 2Gb ELIXER DDR2 667Mhz RAM. I carefully added the new sticks to my motherboard, booted up windows via bios which noticed the new RAM was present. All seemed well.
However, on rebooting the system and entering the CentOS boot phase, after the boot phase (eg starting program... [ok] etc) but before the login screen my screen goes black / blank. My system has an ATI FireGL v3100 graphics card, I checked out the technical info on this and it should be ok on 64 bit linux. (See: [URL])
[Code]....
My system is a Lenovo B500 All-In-One, with an Nvidia GTS 250M video card. nv seems to work okay, but I cannot get the desktop to load with the nvidia driver (nvidia-current, from the repository). I've been hacking away at this for a week and a half with no results. Every time I try to boot with the nvidia driver, the splash screen comes up for a second, the screen flashes a couple times between a "static" screen and tty2, then the screen seems to go to a test mode, where it flashes a series of solid colors indefinitely. Looking at /var/log/Xorg.0.log, I see the following:
Code:
(II) May 08 19:06:53 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) May 08 19:06:53 NVIDIA(0): enabled.
(WW) May 08 19:06:54 NVIDIA(0): Failed to enable display hotplug notification
[code]....
My 4 GB 2nd generation Ipod nano will not mount to my Compaq Presario 2105US running Xubuntu 9.10. I get a message that says, "Failed to mount Ipod" with a description that says, "mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ."
I even went back to my XP to restore the ipod to factory settings essentially formating it, to see if that would help, but I get the same result.
Is there something that I may have overlooked?
I have tried twice to use Wubi to install Xubuntu on a Windows XP machine. Each time the results were the same:
1) Downloads the required stuff.
2) Does some post-download stuff.
3) Says it needs to reboot to finish the installation.
-------------- here is where it goes bad -------------
4) Reboots back into Windows. There is nothing set to choose Xubuntu (no error messages displayed in prior steps).
Has anyone else encountered this bug?
I'm trying to test out using xubuntu 10.04 on my one computer and keep getting a black/blank screen after selecting the 'try' menu option.Is there a way to fix this?I have tried some of settings via F6 with no luck.
FYI -The CD works fine as I have tested it on other machines.The version I am trying is xubuntu x86 (although I have tried ubuntu 10.04 x86 with similar results).I can Alt+Ctrl+F1 fine and get to the cmd prompt
I have a problem, because installation of ubuntu 11.04 will fail if I try to.
I have also Kubuntu and Xubuntu installed, which I regret a lot because I cannot uninstall them as well...
The problem is that I have installed a one-time-activation proprietary software so a fresh install is no option.
The error when upgrading is, that "xubuntu-desktop" cannot be marked for upgrade!
mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
I am not sure what is happening here. My ipod nano worked perfectly with the computer I am using with Windows XP, Ubuntu 9.04, Xubuntu 9.04, and gNewSense 2.3.
I wanted to use Xubuntu 9.10, but my ipod does not work with it. The other choice is gnewSense, but I am not sure if I want to be limited by their ultra-strict free software policy. I posted a TON of information on the Ubuntu forums about this:
[URL]
My last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
I reinstalled fedora the other day, and it's been working just fine, apart from the internet. It shows that I have a full connection with the wireless network, but it's really difficult to actually load a page. 80% of the time it just fails and shows "Page Load Error". It's really frustrating because it is connected to the internet. In fact, the icon in the address bar even loads from the site I try to access, but websites just will not load.
I've tested my wireless internet with another laptop which is running vista, and it works perfectly on that. Also, I'm running Fedora 10 on an Acer Extensa laptop.
look at my text file cite will not let me put text here keeps saying it is a url. but it is not a url I have an old hp computer with 256mb memory. i updated to the linux image that has the number 17 in the generic. i can not hit esc in grub to enter an the old 14 generic. every thing come up ok with the xubuntu log in screen but when i log in the screen get swrily and set me back to the login screen. on the 14 generic i had to change the realotion to 800x600 becuse the corners were fuzzy on 1024x768. what about setting the rezaltion over a ssh. ssh -C -X parkview@xubuntu xfce4-terminal or is it something else? i did a clean install of xubuntu. i was told to do
reinitializing my XFCE configuration. Log in outside of X (press Ctrl+Alt+F1 to get a console login prompt or login via ssh) and then run the following commands:
mv /home/parkview/.config /home/parkview/.config.bkup
mv /home/parkview/.cache /home/parkview/.cache.bkup
that works exectp when i change the screen resalotion to 800x600. my screen doesnot like 1024x768. after i change it I cant log in any more tell i do
rm -vrf /home/parkview/.config
rm -vrf /home/parkview/.cache
but my screen is back at a crapy 1024x768. i do rm becure i already have it back up the first time. cite would not let me post code kept saying it was a url but it is not
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedXubuntu 9.10 freezes sometimes after login. Also I Cannot switch to console When it freezes. REISUB & boot again I can do. No freezing has happened inside. Where from to look cause? From syslog I cannot find...
What are these in syslog:
Feb 18 09:22:59 ubuntu avahi-daemon[2430]: WARNING: Failed to contact D-Bus daemon.
Feb 18 09:22:59 ubuntu init: avahi-daemon main process (2430) terminated with status 255
Feb 18 09:23:13 ubuntu rsyslogd-2039: Could no open output file '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ]
Feb 18 09:23:13 ubuntu init: gdm main process (1127) killed by KILL signal
Feb 18 09:23:13 ubuntu init: gdm main process ended, respawning
I installed 10.04 on my pc. I also have 9.08 and XP installed. Both work. The 10.04 gui login screen displays and asks for the password. I enter the password. The screen goes blank but after a few seconds the gui login box re appears and again asks for a login. I rebooted into the TTY, created a new user, checked the new user was in in /etc/passwd and that I could get into the new user's account. When I rebooted into the gui the new user was there and I entered the password but again I just got back to the gui login window. The pc I am using is at least 5 years old. I have tried startx and I do get the gui background but no controls are displayed. I am using 32 bit 10.04. Using the TTY I have uploaded all the current fixes.
View 3 Replies View RelatedThe problem: upon login to my machine, xubuntu opens the software center automatically. I have looked in Applications >> Settings >> XFCE4 Settings Manager >> Session and Startup >> Application Autostart, and I did not find an entrie for the software center.
My system: Xubuntu 10.04LTS This is only a minor problem because it is easy to just close it after it opens, but it is mildly annoying.