Ubuntu Installation :: Error:lenovo 64 Bit With Windows 7
Nov 4, 2010
will someone help me from this problem.....I really need urjent help on this, when i start my laptop it just this error it is lenovo 64 bit with windows 7 and ubuntu installed on it.
init:failed to spawn plymouth main process:unable to execute:exec format error
init:failed to spawn hwclock main process:unable to execute:exec format error
init:failed to spawn mountall main process:unable to execute:exec format error
init:failed to spawn mountall post-stop process:unable to execute:exec format error
View 1 Replies
ADVERTISEMENT
Aug 1, 2011
I tried installing Ubuntu 10.04 LTS on my girlfriend's lenovo using a live disc. First we tried it out to show her the wireless would work fine (her previous lenovo was not ubuntu friendly at all). She's interested in keeping her windows 7 partition along with the lenovo recovery partition, so I tried doing a dual boot install. I manually moved the cursors setting the disk space on each partition, and we allowed Ubuntu to do the rest. Much to my dismay, the installation failed.
I've done some reading over the internet, and I think in our case it would be best to use a Wubi installation. We're interested in using 10.04, so where can we find a wubi installer of Ubuntu 10.04?
Also, any ideas why the installation might have failed? The iso was downloaded off the ubuntu main site, and we burned it using infrarecorder.
View 3 Replies
View Related
Sep 18, 2010
When rebooting IBM ThinkCentre I get black screen with error msg: "1962 - Operating System not found". There are fixes but they are for MS Win systems and I am running Ubuntu 10.04. Does anyone know of a fix for PCs with Linux? This seems to be a known bug. The workaround I use is: ctrl-alt-del but I would prefer to fix it right
View 2 Replies
View Related
Jul 29, 2011
I have at office dual booting Fedora14 + Windows 7 in Laptop Lenovo G550. I am using it regularly for work. Recently it stopped normal shut down. It showed some panic message first time and i have to force shut down.It boots normally. Now it does not give any message during Shut down but it does not shut down properly. Every time i have to force shut down.I am ready to follow instructions from forum members. I want to know that how much serious this panic is. Will it result in corruption of installation?
View 5 Replies
View Related
Aug 17, 2010
i finally decided to updgrade from Hardy Heron to Lucid Lynx. for this i made a backup of my old install, then i couldnt find my Lucid CD so i used a Karmic one to partition my old ext3 to ext4. There were some errors but after trying a few times it worked. Installed Karmic, rebooted (worked fine), downloaded all updates - (did NOT reboot to let updates take effect) and upgraded to Lucid.
Everything went fine so far. Now when i try to boot into Lucid the system hangs, i've also got a windowsXP partition on there so i tried booting that, first grub tells me Error 29: Disk write error then trying again windows seems to boot but it takes much longer than it should and seems to hang.
Then i tried Karmic and Lucid LiveCD (which i found in the meantime) none of the LiveCDs make it to boot after about 20 minutes. (previously they worked fine)looking at the errors it seems to be something about the harddrive. Why the harddrive would stop the LiveCD booting is a mystery to me but the same messages appear when i select Recovery from the Grub menu so i guess the problem is related.
[Code]...
View 3 Replies
View Related
Feb 22, 2009
I have the DVD installer of Fedora 10, i want to dual boot with windows vista. well i get up to the partitioning part of installation (in anconda) and it asks me how i want to partition it... i wanted to re size my partition and create the default format, so i keyd in 70GB and Okay. then it came up with an error, saying I had bad sector(s) The error told me to run chkdsk /f /r in windows, then i could run ntfsresize with -b, (in Linux) well i did all those steps, and shrunk /dev/sda1 to 70gb (/dev/sda2 is my recovery partition) i have a 140 gb hard drive, but can't find the unallocated space anywhere!
when i booted windows, it ran a chksdk, like it should, and in my computer it said that it had been shrunk (because the pie graph showed a capacity of around 70GB) When i go into windows disk management it says no unallocated space, just one big partition (and a 8gb recovery partition) this is the same with GParted on puppy linux, GParted on fedora 10 (live cd) says there is no drives I can mount or unmount and same error on partition logic... in EASUS partition manager i get told that there is no unallocated space, in the fedora installer there is only /dev/sda1 and /dev/sda2. Does anybody know.. how to install fedora on this partition, or get rid of the partition and repartition it another way. when i click on the option to remove all linux partitions and create default format, it errors and says it cannot make another primary partition, then says there is no room for /boot. and i can not proceed.
View 1 Replies
View Related
Dec 26, 2010
I am attempting to install Ubuntu Netbook 10.10 within Windows 7. The installation process using WUBI worked as expected. However, after rebooting to finish the installation process, I am stuck at:
Completing the Ubuntu installation.
For more installation boot options, press 'ESC' now...
0_
I'm definitely puzzled on why I'm stuck on this screen. Also attempting to boot from USB will be stuck without an additional command line being inserted. I have come across threads relating to boot issues, but I have found no solutions to this. I'm rather annoyed that this sort of bug has not yet been fixed. Earlier this year I installed an earlier version of Ubuntu Netbook, which was most likely version 9. So I have no idea why 10.10 suddenly will not install on my machine.
View 1 Replies
View Related
Jan 24, 2011
I have a problem that Ubuntu 10.10 won't run on my Lenovo Ideapad laptop. I have managed to install it over ethernet a few weeks ago an it worked fine, but whenever I try to install it from a cd, installation completes successfully, but the Ubuntu won't start. A black screen with a lot of text on it and then everything freeze.
I have tried it without installing and it worked (live cd). I have also tried to install it on my desktop machine and it worked fine.
On my laptop, I already have a Windows 7 (64 bit) on another partition.
Did anyone have a similar problem?
View 1 Replies
View Related
May 14, 2011
How to set up for broadband Internet on ubuntu on lenovo.my video n audio player of ubuntu is not working.
View 4 Replies
View Related
Aug 11, 2010
I'm experiencing an annoying issue since I upgraded from 9.10 to 10.4: when I try to put my Laptop to sleep, the control sign for suspension starts blinking and that's it: the system hangs and I've got to kill it with pressing the power button. Resuming doesn't work either, same symptoms.
View 9 Replies
View Related
Aug 22, 2010
Finally got my Lenovo X201 up and running by combining a couple of different workarounds suggested for the graphics driver problem that is plaguing so many. This works on my X201 3249CTO, running BIOS version 1.17, with Ubuntu 10.04.1 (kernel version 2.6.32-24). I have tested it to differing degrees with all four relevant installers (32- and 64-bit, desktop and alternate).
STEP 1. Add "xforcevesa i915.modeset=0" at install. When you first start the desktop installer, you should see "ISOLINUX..." in the upper lefthand corner of the screen, followed by a couple of white logos at the bottom of an otherwise blank screen. As soon as you see these logos, press the space bar to get the advanced install menu. If you are using the alternate installer, you will get the install menu automatically.
--Make sure "Install Ubuntu" is highlighted. Press F6. You should see the install command line near the bottom of the screen, plus a popup menu with additional options. Pres Esc to close the popup menu. A cursor should appear at the end of the install command line.
[Code]...
View 3 Replies
View Related
Apr 16, 2011
I just started testing ubuntu 10.10 today (first time user!) on my desktop via usb drive and I liked it very much so i wanted to try it on my laptop (lenovo x120e, a relatively new model).
When i tried to use the usb drive on my laptop, I am unable to boot ubuntu at all!
I went into the "boot device" menu (pressed F12, for lenovo users) and to specifically boot from the "USB HDD" drive. This caused the screen to go blank and a cursor started blinking on the top left hand side of the screen. A few seconds later, i would return to the "boot device" menu to try again. (my guess is this is what happens if boot fails).
My laptop has win 7 installed on the hard disk, with no other OS installed. The bios is at factory settings.
I googled this topic and there are many threads out there of users encountering the same problem, none specifically for the x120e model. the other solutions are either too technical for me to understand or may not apply. Below is a list of what i've tried or will try later..
List of things tried/to be tried
1) use unetbootin instead of Universal-USB-installer - tried both, was able to boot from desktop but not on laptop
2) assign a variable to kernel (could not find the exact name, but the variable name had the string "intel" prepended - i didn't try this... my laptop is amd (i don't think it should matter... my desktop is also amd)
3) re-image the usb - done it many times
4) corrupted usb? - seemed to boot on desktop with no issues... tried other usb anyway but no luck
5) Try to install 10.04 - just downloaded it, will try tomorrow
6) Try to remove the hard disk
View 4 Replies
View Related
Mar 30, 2011
I have a single harddisk partitioned with Ubuntu Maverick and Windows 7 installations. I installed Windows first and then Ubuntu, after resizing partitions and adding a new one for Ubuntu. Win7 did not appear in the Grub2 boot menu. I added it (sda3), but on rebooting, I get the message "BOOTMGR is missing/Press Ctrl+Alt_Del to restart".
I understand that Win7 might have put its boot manager in another partition, and sda1 had FAT. I added sda1 as another grub2 entry, but when I try that, I get the error message "Windows Boot Manager/ Windows failed to start. A recent hardware or software change might be the cause... Status 0xc0000225/ Info: The boot selection failed because a required device is inaccessible." Attached are fdisk and parted outputs; and the grub2 files I created. How do I get Windows 7 to boot up?
View 6 Replies
View Related
May 23, 2010
I just completed the ubuntu 10.04 installation using the windows' installer.After the installation, the system reboot. I chose "ubuntu" from the OS selection screen.A message appeared that the system would verify the installation parameters.
Suddently, a message was shown:
"no main file system chosen. Please solve this error from the partition menu."
And it wouldn't continue!
how can I find the partition menu and set the file system for the ubuntu?? An idea would be to enter the installation cd for windows (as if I would wanted to format the pc)...wouldn't then the partition menu appear?
View 4 Replies
View Related
Jan 4, 2010
I'm trying to install Ubuntu 9.10 on my Windows Vista Home Premium machine. My specs far exceed the requirements to install, so I know there's no problem there.On installation I receive an error somewhat through that says something like:Quote:An error occured:Permission deniedFor more information, please see the log file:C:UsersUsernameAppDataLocalTempwubi-9.10ubuntu1-rev160.logSo.... I go to that file, and the last line in it is:Quote:OSError: [Errno 13] Permission denied: u'C:\ubuntu\install\ubuntu-9.10-desktop-amd64.iso'I did run Wubi Installer as an Administrator, and unblocked it giving it full privileges.It's really annoying because my download speed is 80kb/s so it takes about 3 hours to download. During that 3 hours I can't use my internet so I have to wait, and wait, and wait, and then boom.error. And wubi can't pick up where it left off, you have to uninstall to reinstall, which sucks tremendously.
View 6 Replies
View Related
Aug 19, 2010
I'm trying to do a clean install of Lucid (10.04.1) 64-bit on a Lenovo X201, Ubuntu only (no dual-boot), using the alternate install disk for an encrypted LVM.
I followed the default options at all points during installation, except that I opted not to configure the network because the computer is not currently connected to a network. The install (said that it) completed correctly.
When I turn on the computer, it correctly runs the BIOS. Then I get a blank screen with a flashing cursor in the upper lefthand corner. The hard drive accesses a couple of times. After a few seconds, the screen goes off (the cursor doesn't just vanish; the screen actually goes off), and it just sits there indefinitely without booting.
I should note that I've tried this with the boot order in the BIOS set several different ways, including HD first and only, with no effect.
View 6 Replies
View Related
Oct 19, 2010
I am trying to install Ubuntu 10.10 on an Lenovo G560 laptop with Intel P6100. Everything seems to work fine except for the graphics. The screen goes blank when I enter startx from the console.
lspci shows the following for the graphics card : 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) In xorg.conf, I've tried drivers 'vesa' which gave me low resolution, and also 'intel' which blanked the screen again. How do I configure this graphics card ? Has anyone else faced similar issues when installing Ubuntu on this graphics card?
View 2 Replies
View Related
Nov 18, 2010
I installed Ubuntu 10.4 and everything works great "out of the box"! I didn't install any drivers.blem, a major one...When I type "top" right after a reboot, around 1GB of RAM is in use. After a few min it grows to 2GB, even 2.5GB for no reason. Luckily, my machine has 6GB of RAM but it's still a major issue for me.I read on another forum another user with the same problem on the same Lenovo machine and he solved it by installing the newest driver for his ATI device. I don't have ATI, but I have the impression that I can solve my problem the same way. Do you have any idea what driver my cause that? I checked the Intel site for a new Intel HD graphics driver but they don't have ones for Linux.
View 2 Replies
View Related
May 24, 2011
Sound is not working on my new Lenovo B560 laptop with Intel sound card. The sound card appears in the lspci output. But the Preferences->Sound->Hardware menu is empty, not listing any soundcard.ALSA diagnostics are as follows:[URL]When I run "sudo alsa reload" I get the following output:Quote:
[sudo] password for me:
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/me/.gvfs
Output information may be incomplete.
[code]....
View 1 Replies
View Related
Mar 8, 2011
I have problems installing Fedora 14 on my netbook, is a Lenovo S10-3, model 0647FDS (Atom N550, 2gb DDR3, etc). When the installation program starts, hangs at "Initalizing network drop monitor service"
View 7 Replies
View Related
Aug 30, 2011
I'm trying to install Fedora 15 on my Lenovo S10-2 netbook, using a USB drive I created with LiveUSB-creator, as suggested. The creation of the USB drive works fine, but when I try to boot from it on the Lenovo, I get cryptic error messages :ERROR : idle with IF=0 -- and then some misc. error codes.I have no idea what this means or how to progress from here
View 2 Replies
View Related
Nov 25, 2015
This laptop has been in the mainstream news as the cheapest Windows laptop available. Unfortunately it has a 64-bit CPU with 32-bit UEFI that dumps to the grub shell before installation. In addition, the built-in keyboard does not work.
As far as the dump to shell problem, this seems like something is not setup correctly in the grub UEFI configuration. This "hybrid" notebook should be using the multi-arch as I understand the situation. I noticed there is no grub configuration file in the multi-arch netinst ISO when I mounted it and looked around. I also noticed the standard netinst ISO is not easily mountable: there are errors when I try to mount the individual partitions to inspect the grub configuration. Additionally, Kubuntu boots perfectly aside from the keyboard issue. Devuan also boots when I modify the netinst to bypass gummiboot and use grub directly. Finally, the multi-arch grub shell freezes up when autocompleting and searching through the drives for the grub config, leading to a forced reboot. As an extra note, I tried 2 different flash drives and CD install media with the same results.
I tried many, many grub kernel combinations to fix the keyboard issue. It works in grub, but not in Linux. I was ultimately going to try a newer kernel to fix it.I was in a hurry to get something set up so back to the store it goes.
View 1 Replies
View Related
May 2, 2011
I want to install NVIDIA drivers on my Debian Squeeze so that I can use parallel computing packages like CUDA C or OpenCL for my Master Thesis. I have NVIDIA Geforce 310M.
I found a link in wiki.debian which gives me two ways to install NVIDIA drivers and I want to install the NVIDIA way (non-debian way).I have to stop 'X' and I stopped it by typing 'service gdm3 stop' and then I went to ''init 3'' . Now I want run
'sh /home/swaroop/Downloads/NVIDIA-Linux-x86-270-41.06.run' but its not working.
View 14 Replies
View Related
Jan 28, 2011
I am running Fedora 14 on a Lenovo B560 laptop.This laptop has a hardware peculiarity, namely Nvidia's newest gag: Optimus.This laptop has two graphics cards: an Intel GMA HD (for 2D) and a Nvidia 310 M (for 3D). The Optimus technology automatically activates the graphics card required for the current task.
Now, Optimus on linux is so far officially unsupported by Nvidia.
At the moment, my Fedora runs on the Intel GMA. I personally don't care if Optimus doesn't run on linux if I can somehow manually (even solely) use the Nvidia 310M graphics card.
So far, all my manual attempts in xorg.conf to speak to this card fail with the X not starting and the well-known "Screen not found" error.
Does anyone have any experience with this or ideas how to activate the Nvidia card?
View 5 Replies
View Related
Mar 31, 2011
My broadcom wireless device is of model BCM4313 and I dont find the way to install the drivers.
View 4 Replies
View Related
Jan 8, 2009
I have a Lenovo thinkpad T400 with Vista x64 that I want to dual-boot with fedora 10. The T400's original config has 3 primary partions:
1) Vista boot partition (some weird partition that it only uses to boot... this is my first time using Vista so I don't know the details, but I think it has to be there and it has to be a separate partition from the "data" partition)
2) Vista data partition
3) Lenovo Rescue and Recovery partition (a separate bootable partition that is used for recovery, backups, ...)
My first attempt was to shrink the recovery partition and add a new extended partition that has the two standard fedora logical volumes and an extra NTFS to be shared between the OS's (I usually use FAT32 for this one, but NTFS support seems to be pretty solid now).
Everything was fine, but I couldn't boot into the rescue partition. According to this site:
[URL]
You *have* to have a linux boot partition be your primary partition. Other people have told me the same thing and that site has an explanation, but I don't get it =)
So, it seems that I need 5 primaries (3 original vista/lenovo primaries, 1 linux primaray to put the boot stuff into, and 1 extended for everything else) to make this work (which is not possible). Can anyone think of something else I could do (other than getting rid of Vista and the Lenovo stuff and giving them both the finger?) I'm thinking maybe I could make an extended partition and move one or more of the Vista/Lenovo partitions in there, but I'm not sure if they could boot.
View 5 Replies
View Related
May 6, 2011
I'm trying to install openSuSE 11.4 onto my brand-new Lenovo W520 laptop, using the Intel Rapid Storage Technology (FakeRAID?) controller, ROM version 10.1.0.1008. I have 2 physical 500GB disks configured in a mirror (RAID-1). Everything looks fine, the installation program comes up and asks if I want to use mdadm to manage the RAID, to which I answer yes. I go through the normal setup screens, and select the partition layout that I want (for sake of this post, I'll limit myself to the layout that the system itself recommends).
The problem comes when it becomes time to format the partitions. Somehow the partitioning program gets it into it's head that the root partition is 10TB, not 20GB, and the ext4 partitioning fails in various ways (short reads to sector zero, unable to map using 4096 byte sectors, etc, etc) depending on exactly which partitioning scheme I'm attempting. I pretty much get the same result no matter how I play the partitions, which file systems I use (XFS, ext4, etc [of course, I can't use XFS for /boot...]).
For now I've gone ahead and set myself up using software RAID, since this system is unlikely to become dual-boot with Windows for a few years at least. (As an aside, but as a hint to others, when the installation fails, I end up having to go back into the Intel RAID controller BIOS boot to clear out the entire RAID setup each time it fails - the disks are left in a completely useless state).
View 5 Replies
View Related
Aug 19, 2015
I tried to install Debian 8.1 on Lenovo Edge 125, but on stage ''detecting network hardware' of install process my laptop stopped and froze, so I don't know what to do. (Previously I've installed Debian 6 or 7 on this laptop and every thing was OK).
View 6 Replies
View Related
Jun 2, 2010
I've one lenovo 3000 g430 4152 laptop on which i have windows but previously installed debian 5.03 and for enabling the wireless i've to download broadcom b43legacy and install it by compiling because the backports kernel doesn't work with lenovo and after installing debian accidently switched of the wireless by the slide button on laptop
but on next boot i was not able to enable the wireless either by the slide button or fn+f5 which is the key for enabling it the wireless then on some forum i got advise that i can only re-enable by installing windows because lenovo drivers are available for only windows for this model... my question is that is there any solution for it in debian and also there is one more problem that i've to press fn+f8 twice on each boot for enabling the touchpad...
View 1 Replies
View Related
Jun 13, 2010
I was trying to install Ubuntu 10.04 LTS on my windows xp. dowloaded and installed wubi. All worked well and system asked me to restart. After restart ubuntu was showing on multi boot screen, selected it. Then the system asked me to ESC installation or not, i didn't Esc. The Ubuntu screen was showing, but all of a sudden an error message saying INSTALLATION FAILED occurred.
My system
Processor: Intel pentium IV
Ram 1 GB
Harddisk:- 160 gb
View 1 Replies
View Related
