When rebooting IBM ThinkCentre I get black screen with error msg: "1962 - Operating System not found". There are fixes but they are for MS Win systems and I am running Ubuntu 10.04. Does anyone know of a fix for PCs with Linux? This seems to be a known bug. The workaround I use is: ctrl-alt-del but I would prefer to fix it right
View 2 RepliesWhen he rebooted his Grub gave the error: Grub error 22. He doesn't have internet right now. Know of any fixes? He's booted into a live cd.
View 9 Replies View RelatedI recently pulled out my old computer and decided I would install linux on it so I could get online. The specs aren't the greatest (Pentium II processor, 94 MB RAM, and an 8 GB HDD). I chose AntiX 8.0 as my OS. Anyways, I got through the installation just fine, but when it said "Try rebooting your computer without the CD"...So I did, and what happened? I got that error. I've tried rebooting with different Live CDs to no avail. Is there anything I can do to get back up and running?
View 4 Replies View Relatedwill someone help me from this problem.....I really need urjent help on this, when i start my laptop it just this error it is lenovo 64 bit with windows 7 and ubuntu installed on it.
init:failed to spawn plymouth main process:unable to execute:exec format error
init:failed to spawn hwclock main process:unable to execute:exec format error
init:failed to spawn mountall main process:unable to execute:exec format error
init:failed to spawn mountall post-stop process:unable to execute:exec format error
I saw 2 users asking the same question, but no one has answered that post...
I am posting this because it is also happening to me.
I've installed (through Wubi) Ubuntu 10.04, after rebooting, I've got this error, waiting a couple seconds, Ubuntu started normally. This message now repeats whenever I start Ubuntu.
Error: unknown command, keystatus
I always get this message when I boot to Ubuntu. How can I get rid of this message and fix this issue.
I am trying to install 10.10 from a Live CD over my 9.04 (it would not do the upgrade automatically due to apparently lack of disk space.) at the end of the my best guess at the process (alas, Linux is pretty much a plug and pray operation for me.), on rebooting, I get the message: "the disk drive for / is not ready yet or not yet present" I must have messed up at the Allocate Drive SPace / Edit Partition step. I have three existing partitions:
7Gb for OS previously 9.04
35GB for data (which I clearly don't want to mess with)
a a bit for Swap.
So, I have clicked on the 7GB partition /dev/sda1 and have another window, Edit Partition, which is asking me: New partition size (I would just leave it at 7007) Use As (I presume I can leave it as EXT4?) Format the Partition (NO unchecked?)and Mount Point? Now here is where I don't have a clue. The pull down options are:
/, /home, /boot, /tmp, /usr, /var, etc.
not knowing any better, my first time through I just picked "/" and that is what got me to the message "the disk drive for / is not ready yet or not yet present" So what should I be specifying at this point?
I was playing with my debian server when something went totally wrong while i was editing something on my network interface,i removed those crap that i wrote and left the network interface configuration as it was
Like for example after re-editing my network interface,it was like :
As i did a network restart, i get this error saying :
There is already a pid file /var/run/dhclient.eth0.pid with pid 2802 killed old client process, removed PID file.
What is this error and how can i fix it,because every time im re booting my server i lost my network config.
Sound is not working on my new Lenovo B560 laptop with Intel sound card. The sound card appears in the lspci output. But the Preferences->Sound->Hardware menu is empty, not listing any soundcard.ALSA diagnostics are as follows:[URL]When I run "sudo alsa reload" I get the following output:Quote:
[sudo] password for me:
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/me/.gvfs
Output information may be incomplete.
[code]....
I am running Fedora 14 on a Lenovo B560 laptop.This laptop has a hardware peculiarity, namely Nvidia's newest gag: Optimus.This laptop has two graphics cards: an Intel GMA HD (for 2D) and a Nvidia 310 M (for 3D). The Optimus technology automatically activates the graphics card required for the current task.
Now, Optimus on linux is so far officially unsupported by Nvidia.
At the moment, my Fedora runs on the Intel GMA. I personally don't care if Optimus doesn't run on linux if I can somehow manually (even solely) use the Nvidia 310M graphics card.
So far, all my manual attempts in xorg.conf to speak to this card fail with the X not starting and the well-known "Screen not found" error.
Does anyone have any experience with this or ideas how to activate the Nvidia card?
Lately sometimes I get no connection and I end up rebooting. What is the Deb version of reseting and renew IP connection
View 6 Replies View RelatedI am on a live flash drive, and I want to change the WM. How can I do this? I tried to kill X with control+alt+backspace but it didn't work. I also tried to alt+f1 and control c, then delete the x lock and 'start x' but it wouldn't work. How can I 'exec newwindow manager' and restart x without a reboot?
View 3 Replies View RelatedI just installed a CentOS 5.4 x 64 on a customer's server last Saturday. I use lpr/lpd to print through this server to our network printers.
yum install cups-lpd
Edit /etc/xinetd.d/cups-lpd: disable = no
I did several restarts on /etc/rc.d/init.d/cups. I even did a "kill -SIGHUP 0" and a "kill -SIGHUP pid_xinetd". No joy. I finally gave up and rebooted: joy. Shades of Windows.
What did I miss? How do I start cup-lpd after yum without rebooting.
I have two dual boot systems, each running Fedora 11 and a version of Windows.When I boot into Windows after running Fedora on either, the Windows time is wrong and I have to reset it. But, if I reboot from Windows into Windows, the Windows time is right . I think this results from different ways Fedora and Linux keepi track of time and what they do to the real time hardware clock.Could someone explain exactly what is going wrong and how I can resolve the problem?
View 1 Replies View RelatedI upgraded to Fedora 10 using preupgrade. It installed fine and everything loaded fine. Unfortunately the mouse would not work so I restarted my laptop. Now Fedora won't load at all the PC just turns on then keeps rebooting itself. I really want to avoid using the recovery disk. How to rectify?
View 1 Replies View RelatedHow can I restart the X server without rebooting? This used to be "CTR-ALT-BACKSPACE",but that doesn't seem to work anymore.
View 11 Replies View RelatedAbout 2 weeks ago i installed ubuntu 10.10 and downloaded fresh network drivers. I ran autorun.sh, the module was compiled and installed, i could see it with lsmod. But after rebooting the old module appeared again, but no file for him were in modules directory because autorun.sh removed old module file. Some time passed and I figured out that it is initrd who is guilty. I couldn't check it because i already deleted ubuntu and installed Fedora 14 Beta. Today i tried to repeat my steps and installed new network module on Fedora. But when i rebooted and started again i was surprised - new module works instead my old one. Everything is fine So, my question, does Fedora use initrd? I saw some files in /boot that which are initrd files (as i think). Or may be not every fedora system uses initrd or something else?
View 7 Replies View RelatedMy laptop (as many others) has a hardware switch which turns wireless/bluetooth disabled. If after booting up the system I switch on this key, the wireless would still remain disabled and I need to reboot the system to be able to connect to any network.
I have tried
Code:
rfkill unblock all
ifconfig wlan0 up
Is there any way to activate wireless without rebooting the system?
We have some Ubuntu x64 8.04 servers that sometimes get stuck when rebooting. The only thing we see on the screen is "Loading, please wait" and some stuff below. I am attaching a picture of the monitor. We have this specific server set to reboot constantly while we try to figure out the issue however we don't know where to start, can we look at logs at this point (probably not since the hard drives aren't mounted yet), can we add debug info?
View 7 Replies View Relatedout there remember what that application is called that where it can update your kernel without rebooting?
View 1 Replies View RelatedI've noticed that there's no Network Manager icon on my notification area after rebooting, no matter how many times I delete my GNOME panel configuration and restore the defaults. However, after rebooting, if I restart the D-Bus service (and thus my whole desktop), the NM icon does appear - even though NetworkManager is not running. I've already tried reinstalling gnome-panel, network-manager, and dbus, which hasn't changed anything.
How can I make the NM icon appear every time I log in?
I'm having problems using a swap file to increase swap space in Linux. I followed the instructions for creating a swap file, as shown here:
[URL]
It works, and I increased my swap space. But when I reboot, I'm back to the original amount of swap space I had before. The swap file I created is still there, but it's not being used as swap space. I tried remounting the swap file but it doesn't work.
Also, it seems there isn't an fstab entry created for the swap file. Strange, huh? I don't think it made a difference but I manually copied the UUID for the swap file and made an entry in fstab.
I may be wrong, but from what I can tell the UUID of the swap file keeps changing every time I reboot.
So basically every time I reboot I have to repeat the instructions shown above to get more swap space.
Since I upgraded to 10.10 my system keeps rebooting spontaniously.... Haven't been able to find anything wrong with the system, other than the reboots.
View 6 Replies View RelatedHere I was, humming happily along on my Ubuntu 10.10 machine, when thanks to a stupid Windows proprietary task that I NEEDED to perform, I rebooted in Windows later this morning. When I was done with the task, I tried to reboot again back in Ubuntu, but lo & behold, it wouldn't start. I tried several times, I tried recovery mode, I tried previous versions, and NADA! It's as if the kernel only existed in name only. So now I don't know what to do, because I cannot access my Ubuntu files from Windows (which luckily still works), plus I cannot abide the idea of having to give up on Ubuntu for good and going back to Windows! I'm willing to reinstall the whole thing again, so I've downloaded a new .iso image to create a new install CD, but I cannot seem to successfully create the new CD image either. I'm tempted to download Wubi, but I'm not sure if that's a permanent solution either.
View 9 Replies View RelatedI"ve started using Ubuntu 11.04 with my Intel iMac. Today I was playing EDuke32 on Ubuntu then the game got freezed, so I tried Ctrl+Alt+F1 and it worked. I just logged in the console and typed;
sudo reboot
This actually didn't work, so;
/usr/bin/sudo /sbin/reboot
This worked.
After rebooting, I tried log in with the GUI login screen. However I just cannot login. After I input my password and press enter, login screen goes black out and comes back to the login screen. I also tried to log in from console (Ctrl+Alt+F1), and it worked. I can log in.
If i install new hardware using a vmguest or physical system How can I detect it.
disk
nic
memory
etc.
In AIX we just run cfgmgr -v. Is there a similar command in Red Hat?I am guessing a reboot will pick it up if the device drivers are common enough and in the kernel already. I want to know how to do this dynamically with the system on-line if possible.
Can I add memory to the Linux box without rebooting the system? I think Linux check the hardware at booting time. But if I need to add more memory to the server while I do not want to stop the service. Is there some method to make Linux use the new added memories?
View 5 Replies View RelatedI have intel 945 motherboard which supports maximum 2G DDR2 RAM at 667MHz. Now in the market RAM with minimum freq is 800MHz and i am confused should i install the 800 MHz RAM. Would installing RAM with higher freq than required harm my motherboard or will it work without problem to the hardware. my desktop is rebooting every 15 mins. I checked with memcheck and it showed RAM was bad.
View 1 Replies View RelatedI have a D-Link DSL-322T ADSL modem.It's internal operation system is *nix. I can open it's internal shell by telnet protocol.Like this:
Code:
telnet 192.168.1.1
Trying 192.168.1.1...
[code]....
I'm running RHEL5: 2.6.18-164.el5 #1 SMP Tue Aug 18 15:51:54 EDT 2009 i686 i686 i386 GNU/Linux
under VMWare Server 2.0.2. When I create a new disk for my Linux VM I want to be able to use it without rebooting.
I checked what was currently in use:
cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: VMware, Model: VMware Virtual S Rev: 1.0
Type: Direct-Access ANSI SCSI revision: 02
[Code]...
i can't access to localhost with firefox although yesterday I could installing XAMPP successfully and access to localhost. Now when i enter to file:///opt/lampp/htdocs/index.php this message is shown :"Something is wrong with the XAMPP installation
View 1 Replies View Related