Fedora Installation :: Error, Saying I Had Bad Sector(s) The Error Told Me To Run Chkdsk /f /r In Windows, Then I Could Run Ntfsresize With -b, (in Linux)

Feb 22, 2009

I have the DVD installer of Fedora 10, i want to dual boot with windows vista. well i get up to the partitioning part of installation (in anconda) and it asks me how i want to partition it... i wanted to re size my partition and create the default format, so i keyd in 70GB and Okay. then it came up with an error, saying I had bad sector(s) The error told me to run chkdsk /f /r in windows, then i could run ntfsresize with -b, (in Linux) well i did all those steps, and shrunk /dev/sda1 to 70gb (/dev/sda2 is my recovery partition) i have a 140 gb hard drive, but can't find the unallocated space anywhere!

when i booted windows, it ran a chksdk, like it should, and in my computer it said that it had been shrunk (because the pie graph showed a capacity of around 70GB) When i go into windows disk management it says no unallocated space, just one big partition (and a 8gb recovery partition) this is the same with GParted on puppy linux, GParted on fedora 10 (live cd) says there is no drives I can mount or unmount and same error on partition logic... in EASUS partition manager i get told that there is no unallocated space, in the fedora installer there is only /dev/sda1 and /dev/sda2. Does anybody know.. how to install fedora on this partition, or get rid of the partition and repartition it another way. when i click on the option to remove all linux partitions and create default format, it errors and says it cannot make another primary partition, then says there is no room for /boot. and i can not proceed.

View 1 Replies


ADVERTISEMENT

General :: Run Chkdsk Using A Windows Boot CD On A Linux NTFS Partition?

Aug 6, 2011

This question made me wonder: "Can you run chkdsk using a Windows boot CD on a Linux NTFS partition?" Would it cause more problems, or fix them as in Windows?

View 1 Replies View Related

Ubuntu Installation :: 11.04 - Loading VM / Error Reading Sector

Sep 1, 2011

I created a boot disc (USB drive) with Ubuntu 11.04 and tried to install it on my Gateway GT5012 desktop running Windows XP. It gets to the part where I can "Run Ubuntu from this USB," and I select it. The screen shows "loading vm/linuz..." or something like that, and then the entire screen turns into dots.

One time, when trying to boot from the drive, it brought up
"CHS: Error 0201 reading sector 1418005 (88/68/3)
EDD: Error 4200 reading sector 1418006"

I ran this same USB drive on another computer (also running XP), and it worked just fine, so I really have no idea what's going on. If it matters, the computer it worked on had Internet access, this one didn't. It says "Loading /casper/vmlinuz..." and then goes to the screen of flashing dots.

View 4 Replies View Related

Ubuntu Installation :: GParted Hangs Because Of Sector Size Error

Mar 22, 2010

Gparted won't let me install Ubuntu 9.10 64 bit. Every time it hangs at 47% and throws a sector size error, something like: doesn't support sector size 2048 and the code is HIGHLY EXPERIMENTAL. My 1TB hard drive exists out of the following partitions:

100MB Windows 7 Reserved
900GB+ Windows 7
30GB EXT4
1MB unallocated space

Is there a workaround for this? I've tried installing Linux Mint and Ubuntu but both gave me the same error.

View 7 Replies View Related

Ubuntu Installation :: Can't Boot 64-bit Alternate Install Cd - Error 8000 Reading Sector 2855

Aug 6, 2011

when i try to boot the 11.04 64-bit alternate.iso i get the following message, after it says that isolinux blabla is loaded: EDD: Error 8000 reading sector 2855 and when i remove the cd it says: gfx.c32: not a COM32R imageand then there is a grub-shell.

View 2 Replies View Related

Ubuntu Networking :: Get The Error "windows Can Not Access \linux-laptopmovies?

Jan 9, 2011

I'm trying to network a Ubuntu 10.04 laptop (192.168.0.11) with a VistaHome 64 desktop (192.168.0.10). I have full access to files from Ubuntu either connecting through Network or by Connect to Server. From Vista I can see linux-laptop under the network.I am trying to share /home/john/movies, /home/john/pictures, and /home/john/music. When I open linux-laptop I can see my shares. However when I try to access a folder lets say movies which is actually located at /home/john/movies I get the error "windows can not access \linux-laptopmovies". This stands true all shares. I think the path is defined incorrectly somewhere. To test this theory I created a file called john2 at root and shared it. I placed a nondescript .txt file in there. When I opened linux-laptop from Vista I saw among the other shares john2. When I tried to open that it allowed me and I was able to see the text file. I believe I have an incorrectly set path for shares somewhere on Ubuntu. I'm not sure if Im using samba or nfs or both. I can post smb.conf if needed.Also, sometimes Vista ask for a password. I have only 2 users on both machines with identical usernames and passwords both with admin access. Sometimes I get not allowed access error or i get users can not access more than one share at a time error.

View 5 Replies View Related

Software :: Finding A Sort Of LINUX Chkdsk /f /r For The Drives Of Ntfs-3g?

May 26, 2009

finding a sort of LINUX chkdsk /f /r for the drives of ntfs-3g?

View 3 Replies View Related

Fedora :: Dualbooting - Windows 'chkdsk' Does Not Run On Reboot

Aug 25, 2010

I have been dual booting Windows 7 with Fedora for a while (using GRUB, with Fedora as the primary OS) but am running into some problems now.

When in Windows, I was notified that a folder was corrupt and was advised to run chkdsk. So I ran this in the command prompt:

Code:
chkdsk c: /F

which would run on the next reboot. When I restarted the computer, this didn't run.

I believe this problem has to do with the current MBR running GRUB, and not Windows immediately. In Windows, if I go to:Advanced system settings->Advanded->Startup and Recovery->Settings, the default OS is blank with no options available. Also, when running msconfig, under the boot tab, no OS is available.

I backed up the MBR in Linux and then tried to use the Windows recovery disk to do a repair, but no OS was found here as well.

If it helps any, here's what I get when I run 'fdisk -l'

Code:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

[Code]....

View 2 Replies View Related

Ubuntu Installation :: Error 29: Disk Write Error Then Trying Again Windows Seems To Boot But It Takes Much Longer

Aug 17, 2010

i finally decided to updgrade from Hardy Heron to Lucid Lynx. for this i made a backup of my old install, then i couldnt find my Lucid CD so i used a Karmic one to partition my old ext3 to ext4. There were some errors but after trying a few times it worked. Installed Karmic, rebooted (worked fine), downloaded all updates - (did NOT reboot to let updates take effect) and upgraded to Lucid.

Everything went fine so far. Now when i try to boot into Lucid the system hangs, i've also got a windowsXP partition on there so i tried booting that, first grub tells me Error 29: Disk write error then trying again windows seems to boot but it takes much longer than it should and seems to hang.

Then i tried Karmic and Lucid LiveCD (which i found in the meantime) none of the LiveCDs make it to boot after about 20 minutes. (previously they worked fine)looking at the errors it seems to be something about the harddrive. Why the harddrive would stop the LiveCD booting is a mystery to me but the same messages appear when i select Recovery from the Grub menu so i guess the problem is related.

[Code]...

View 3 Replies View Related

Ubuntu Installation :: Bootloader To Usb Hard Drive - Error "no Boot Sector On Usb Device"

Apr 8, 2011

I am trying to install Ubuntu to an external usb hard drive (WD Elements SE). I am also choosing to install the grub bootloader to this disk (/dev/sdb) because I do not want anything modified on the internal drive. The installation appears to go okay, but when I try to boot to the usb drive, I get the error, "no boot sector on usb device" and it immediately falls back to my interal drive. I have tried this installation with both 10.10 (amd64) and 11.04 (amd64). How can I fix this?

View 7 Replies View Related

Fedora :: 'ld-linux.so.2 Bad Elf Interpreter' Error

Nov 12, 2009

I have installed fc11 x86_64 on my machine. When I try to install .bin files, it displays 'ld-linux.so.2 bad elf interpreter no such file or directory' error. I have also installed glibc but it didn't fix the problem.

View 1 Replies View Related

Ubuntu :: Installing Windows - BSOD Error (0x0000007B) And Error With Setupdd.sys (error Code 4)

Jun 27, 2011

If I have a hard-disk with Ubuntu fully installed on it and I want to - all of a sudden - use Windows XP, is it mandatory that I firstly format the hard-disk first? So far, I have used two versions of Windows XP; one of them is from a few years before the other. Both copies of Windows XP when in start-up from booting from CD are causing errors. One of them is a BSOD error (0x0000007B) and the next Windows CD is stopping and giving me an error with setupdd.sys (error code 4). Is it required that the hard-disk is formatted before you even put a Windows boot CD in?

View 2 Replies View Related

Red Hat / Fedora :: Getting Error In Installing Oracle 10g On Linux

Sep 6, 2010

Currently I am installing oracle 10g release 2 with Red hat Linux 4.I am getting the following error.

Exception Name: MakefileException

Exception String: Error in invoking target 'ntcontab.o' of makefile '/home/oracle/oracle_10.2/network/lib/ins_net_client.mk'. In forum I saw this kind of post and I did all the steps, then also getting the error.

View 1 Replies View Related

Fedora Installation :: F12 LiveCD Does Not Boot - Error "error:[drm:drm_mode_rmfb] *ERROR* Tried To Remove A Fb That We Didn't Own"

Dec 14, 2009

Make: Fujitsu-Siemens
Model: LifeBook P7120

For some reason (hardware - I am guessing) the LiveCD does not boot on some laptops. The LiveCD worked well on my Dell Inspiron 1525 without any problems but my Fujitsu-Siemens refused to boot up. If you are trying to install or use F12 with the LiveCD ISO image burnt onto a CD on a laptop and fails with the following error:[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own Boot has failed, sleeping foreverthis workaround may work for you. Sometimes it will come up with another error about 'Root Device Not Found'

The workaround only works on a bootable USB key for some other reason, created with 'live-usb creator' and not a CD nor a LiveCD image on a USB created on a windows machine. I have tried them all.

[Code]...

View 1 Replies View Related

Ubuntu Installation :: Error Exists While Updating Linux Kernel

Mar 3, 2011

My kernel is not updating and I'm getting errors like.........

[Code]...

View 6 Replies View Related

OpenSUSE Install :: Downgrade To 11.1 - Error Reading Sector

Jan 14, 2010

I was about to reinstall the opensuse 11.1 since 11.2 was giving me trouble and ran the 'check installation media' and it turned out every disc I burn gives me 'Error Reading Sector 1891680'. This CD-ROM is broken. Looks like there is a problem with installation. I already burned like 5 different DVDs.

View 9 Replies View Related

Ubuntu :: 10.04 LTS Crashes: End_request: I/o Error, Dev Sda, Sector XXXX

Apr 30, 2010

I just installed the new LTS version but it crashes sometimes an gives the error end_request: i/o error, dev sda, sector XXXX in terminal My PC was working just fine when I was under Karmic. I think it's a bug....

I run Ubuntu 64 bit on my Pentium D820 machine:
HD: Maxtor PATA 160Gb
MB: MSI 7387
GC: MSI TD256E (RX550)

View 9 Replies View Related

General :: SuSe 11.3 Error - No Boot Sector Found

Feb 17, 2011

I recently installed 11.3 on an external drive. After adding some software in yast (searched Kernel and checked every option), I was prompted to reboot but the no boot sector found error came up. Tried reinstalling with the same result. Grub is boot loader

View 8 Replies View Related

Ubuntu :: General Error Mounting Filesystems - Error "No Such File Or Directory Fsck From Util-linux-ng 2.16"

Apr 1, 2010

My ubuntu stops when mounting system hdd. The screen display the following messages :

mountall:/etc/fstab: No such file or directory fsck from util-linux-ng 2.16 WARNING: couldn't open /etc/fstab: No such file or directory init: mountall main process (545) terminated with status 1 General error mounting filesystems. A maintenance shell will now be started. CONTROL-D will terminate this shell and re-try. udevd[560]: can not read '/etc/udev/rules.d/z80_user.rules. Ubuntu: clean, 474879/24231936 files/28016581/96898047 blocks root@i7:~# exit_

I suspect the disk manager pysdm that i had just installed today and it had crash during the previous session. The /etc/fstab file does not exist anymore and i cant rename the fstab.bak because the disk is read-only even for my root user

View 1 Replies View Related

Hardware :: Error : "Could Not Find The SUSE Linux Enterprise Server 10 Installation CD

Apr 21, 2011

We are in the process of testing SLES 10 SP1 installation, onto a new system.

Initially the installation got failed at the start giving following error :

"Could not find the SUSE Linux Enterprise Server 10 Installation CD. Activating Manual setup program."

What is interesting to notice is , if we use SLES 10 SP2 to boot the system upto the Installation menu and then replace the CD with SLES 10 SP1 media, the installation proceeds as normal without any error.

Not sure that could be the problematic thing over here. Does it mean with SP1 , no cdrom/cd or hard disk gets detected ?

View 5 Replies View Related

Ubuntu :: Disk Formatted In Error - Boot Sector Repair

Nov 20, 2010

I was using the disk utility on Ubuntu 10.04 and wanted to make by 500GB external NTFS formatted USB drive into 1 x 50GB FAT32 and 1 x 450GB NTFS. I clicked the option that said format or create a partition and it basically wiped the whole thing in a split second leaving me with 500GB of seemingly empty space. Obviously the files are still there but I cannot boot the drive to view anything. I have downloaded testdisk, but don't know how to use it, but I am sure there is a relatively simple solution here. I am currently repairing the boot sector of the drive as Test Disk showed the drive as "no type" i.e. not FAT/NTFS/ext4 etc., but shows the correct amount of used space though, but I cannot view anything err go, I cannot use the undelete command as yet.

View 2 Replies View Related

Hardware :: SMARTD Reported Disk Sector Read Error

Oct 27, 2010

2 months ago, I built a dedicated backup server using 4 2TB SATA drives for software RAID5 (6TB total). A few days ago, smartd sent out mail saying it found an unreadable sector on one of the drives. I ran selftest using smartctl and the error persisted. So far, neither software RAID nor ext4fs running on top of the RAID volume have reported errors.

MOST OPTIMISTIC: It is normal to have a few bad sectors among billions. Software RAID takes care of alternatives. Keep using the system until RAID spits a more serious warning in the future.

MOST PESSIMISTIC: It is a really bad sign to lead a disaster. No good disk drive should have bad sectors especially when it is only 2 months old. The error is simply not detected by software RAID and ext4. Replace the drive immediately and return the bad drive to the supplier.

View 8 Replies View Related

Fedora Installation :: 12 - Error Bootmgr Is Missing When Try To Boot To Windows 7

Feb 12, 2010

My previous setup was Windows Vista on partition 1, Windows 7 on partition 2, and my recovery partition on partition 3. I'm trying to switch from vista to fedora (cuz I hate vista), so I removed partition 1 and 3, expanded partition 2 a bit (from 80 gig to 150), and moved it all the way to the left with gparted. This gave me a 150g partition labled sda2 as my first partition. I then installed fedora on the (about) 150g of free space. After going into fedora, I used fdisk /dev/sda with menu option f to fix my partition labels. Now I have Windows 7 on partition sda1, fedora's boot on sda2, and fedora on a logical volume in sda3.

My issue is that I have that same old error bootmgr is missing when I try to boot to windows 7. I checked my grub menu, my fdisk, it all looks good to me, so hopefully someone can help me out. If I'm unable to do this without reformatting, could someone please advise me on a program to clone my windows 7? I have a lot of expensive programs on there that I could, in theory, go back to the manufacturer and request a new copy, but I doubt if I even have any license keys written down and I don't know where they would be, so hopefully I can pull them all off and have them work on a new install. Contents of fdisk -l and cat /boot/grub/menu.lst to follow:

[Code]...

View 2 Replies View Related

Fedora Installation :: Windows 7 System Partition (100MB) Error?

May 8, 2010

I've a Raid0(Stripe) 500GB disk1) 100 MB =System Partiton (primary)2) 100 GB = C: installed on Windows 7 X64 (primary)3) 100 GB = D: (Logical)4) 100 GB = Fedora 12 x86_64After i install the bootloader hang, what to do now?

View 4 Replies View Related

Fedora Installation :: Error - "There Was An Error Extracting The Archives For MATLAB Compiler

Dec 22, 2009

I have been trying to install MATLAB 2008b as a standalone version; however, every time when the process runs to 18% it shows an error as follows: "There was an error extracting the archives for MATLAB compiler. Chceck that you have enough disk space and rerun the installer."

I did have checked the disk space which is much more than enough. I have also changed few different disks that are way more than enough as well, about 5GB at least, but this error still popped out when it runs to 18%.

View 9 Replies View Related

Fedora Installation :: Error: /sbin/load_policy:error While Loading Shared Libraries

Mar 12, 2010

I tried to install Fedora 12 on my machine using the Fedora-12-i386-DVD and get the following error: /sbin/load_policy:error while loading shared libraries: lib/libsepol.so.1: cannot read the file data:input/output error exec of anaconda failed install exited abnormally [1/1]

View 2 Replies View Related

Hardware :: Error Mounting - Failed To Read Last Sector (3907027119): Invalid Argument

Sep 7, 2010

I'm trying to mount my new Western Digital Elements 2tb hard drive, but every time I try to plug it into the computer I get this error message:

Quote:

Error mounting: mount exited with exit code 12: Failed to read last sector (3907027119): Invalid argument

HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS),

[code].....

But when I tried opening the hard drive from nautilus I still got the same error message as above (no other volumes was connected at the time). I've also tried opening and watching it in GParted, and I can see it there as a volume that's not allocated. When I tried to allocate the hard it I got the message that it had no partition table. And that I cold make one. I tried and Ubuntu suggested to make a MS-DOS partition table for it. But there I got a little scared as I've not done this before. The external hard drive is brand new and was brought today. And I don't have the possibility to test it with Windows or Mac as I'm using Linux only on my machines.

View 6 Replies View Related

Fedora Installation :: Update Error At Yum - Error Cannot Load Module

Jul 28, 2011

After 2 months away from Fedora i am using it again, and used yum update to update stuff, everything was running fine, downloaded stuff, but 2 of the 666 stuff to install got error, here is:

[code]...

View 8 Replies View Related

Fedora Installation :: GRUB Error - Error - No Such Disk

Dec 22, 2009

I'm trying to install Fedora for the first time on my Desktop. Unfortunately, upon restart once the installation is complete I get the following error:

Code:

This is from Fedora 12 x86_64 DVD. I presume that this obviously has to do with my disk selection during partitioning, during which I deselcted the two drives that I didn't want to be part of the install and left the one that I did selected. I also selected "use entire disk". The drive had copies of both Ubuntu and Windows 7 on it, which I expect were wiped out during install.

I know that the details are sparse...but that's all I did. I'm happy to go back into the installer to retreive any necessary information that may be needed/to reinstall.

View 2 Replies View Related

Fedora Installation :: 11 Boot - Error "Could Not Find Kernel Image: Linux" And The Boot: Prompt After That"

Jul 23, 2009

I have downloaded the i386-DVD.iso image and have burned it on a DVD using Nero Express 6, when it boots from the DVD, it give me an error message "Could not find kernel image: Linux" and the boot: prompt after that. I have burned another DVD using Infra Recorder with minimum write speed but with the same problem. I have Ubuntu already installed on the computer.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved