Ubuntu :: Session Restarts Itself - 'black' Screen Of Death / What's Going On?
May 15, 2010
I'm having a really odd problem since I upgraded to 10.04 on my IBM T40 laptop. Every now and then, especially if I'm using Firefox (so it seems), I will be in the middle of something and suddenly I get a black terminal screen that flashes a few lines ending in "checking battery state" and I get bounced back to the login screen. I log back in and all my work is gone (Firefox and whatever else was open has closed). I was on the web for a while tonight and in a few hours it did it three times. I never had this happen before in 9.10.
Any idea what's going on? If it matters I'm on AC power when this is happening. I haven't used it long enough on battery to know if it does it then or not.
View 1 Replies
ADVERTISEMENT
May 12, 2011
I've had it with 11.04. 2 days, countless posts read, and I still get the black screen of death. I want to go back to 10.10. Can I do it without a complete re-install, and if so, how?
View 5 Replies
View Related
May 29, 2011
I run a live cd I downloaded, right? Everything goes fine - it installs with no real issues whatsoever, when all of a sudden after the install it boots to nothing but the famous black screen with a white, blinking dash.So, what do I do? It was installed on a Dell Inspiron 9300 laptop, and I ended up completely wiping the XP drive to do it
View 4 Replies
View Related
Dec 11, 2010
I had Ubuntu 10.04 running fine. Then I got curious about NVIDIA XServer.
"ATI Technologies Inc RV380 [Radeon X600 (PCIE)]" - Video Card
I opened it up, clicked a settings change, and said OK.
It said you need to update your blah blah blah.
Then it said blah blah blah doesn't exist.
Then it said it would create it for me.
Then I said REBOOT!
Now I get a black screen of death.
The only way I can get anything to happen on my monitor that comes from this computer is to boot into the Install Disk and say "TRY UBUNTU".
View 6 Replies
View Related
May 26, 2010
I'm having no end of problems trying to get 10.04 onto my older Toshiba Satellite A50 laptop that I use as a spare laptop round the house. The laptop previously dual booted with XP and Xubuntu fine. I wanted to give Lubuntu a go to see if it's performance was better on this older hardware. When installing I got the black screen of death, and also got the same problem with the Xubuntu CD. Research pointed me in the way of this article: [URL] I was able to boot the Lubuntu Live CD using the instructions outlined in method A.
Once installed however I rebooted and Grub seemed to be knackered. Just sent me to a recovery console of which I had no idea what to do. As I could no longer boot into Windows either I reinstalled Xubuntu 9.10 and all was fine. I decided yesterday to give it another bash this time connecting to my wireless from the live cd hoping it would download an update to fix this problem. Nadda, Grub this time did show and I was able to boot into XP, but upon picking my Linux distro I now get an unrecognised device error with a long string of charachters and then it dumps be back into the grub menu, choosing the recovery mode version does the same thing.
View 6 Replies
View Related
Mar 20, 2011
I'm installing OpenSuse 11.4 to a HP DL180 G6 server, with no luck. I go through the installation process when booting up from the DVD, and when it finish and restarts in loads Suse and then goes to a black screen and doesn't respond.
View 9 Replies
View Related
Nov 2, 2010
I have installed Ubuntu 10.10 alongside Win 7 on a seperate partition. But starting from yesterday, my Ubuntu doesn't boot. Instead I get a Black Screen of death. I tried the Ubuntu Safe mode, and hit grub>boot I got a message saying, "No kernel selected."
View 1 Replies
View Related
Mar 16, 2011
since a few weeks suddenly my session terminates and shows me the login screen again. It happens randomly.
Using Kubuntu 10.10
I am seriously considering a complete reinstall..
View 6 Replies
View Related
Jan 31, 2011
I've recently installed Fedora 14 (x86_64) on my Alienware m15x laptop which has a NVIDIA GTX 260m onboard. Now I have followed leigh123linux's guide to installing those drivers on F14. The installation is a success and everything seems to be in working order, until the system randomly logs the user out and/or restarts the session with no warning. The screen goes black and the nvidia logo appears and then its back to the login screen again. This can happen many times with no apparent stop insight. This does not happen with the default F14 drivers that come with the installation, I have tried several re installations of the Fedora OS and several re installations of the NVIDIA driver, i still have the same problems.
View 3 Replies
View Related
Mar 21, 2010
I created a USB stick with Ubuntu 9.10, used it to boot a dell Inspiron 1550 laptop which has WinXP. I tested 9.10, everything went fine out of the box so to speak. But when I went back and tried to boot XP again I got a blue screen. XP starts in safe mode and no apparent problems are detectable but it will not start in Win normal mode anymore.
View 8 Replies
View Related
May 1, 2010
I've installed almost every version of ubuntu so far and four different versions on this computer, and I've never had a problem with the installation cd. The install cd on this new version however gives me only a purple screen of death with a white line down the middle. What is going on? The ubuntu-10.04-desktop-i386.iso file's md5sum is fine. I've burned it successfully on two different discs and still I can't install it. I've got a Dell 6400 with an nvidia geForce 7300 video card.
View 9 Replies
View Related
Oct 19, 2010
I have an Acer Aspire 4730Z laptop running Edubuntu 10.10 (32 bit, clean install). My problem is with the boot process. After boot and everything seems working properly, I will get the ?black screen of death? followed by the log in screen. Unfortunately, the display is made up of nothing but horizontal and vertical lines, leaving noting recognizable. I have to do a hard restart. I have to go through this process 2-4 times before I am up and running. The ?black screen of death? occurs right after I load any program
View 3 Replies
View Related
May 1, 2010
i feel like i should be on the payroll if I have to work so hard and long to get these things working. (ranting stopped, for now) I have ATI Mobility Radeon HD 4330 GPU in my Dell Zino system and finished the upgrade from 9.10 to 10.04 LTS and got the purple screen of death. tried the intel recommended fixes but got nothing. I cant even get into recovery mode.
View 3 Replies
View Related
Apr 28, 2011
I just upgraded from Ubuntu 10.10 to Ubuntu 11.04 Natty Narwhal and now I've got a purple screen of death. The download and install process all went okay, but when I restarted the computer through the upgrade dialogue to complete the installation process the system never came back online. When I turn on my computer it goes through the standard boot screen (F2 and F12 options shown while it boots the HDD, ODD, and wireless modem), and then it goes to a purple Ubuntu screen and doesn't do anything at all. I let it sit like that for 30 minutes before turning off the power and trying to boot again, but the same thing happened. I can press CTRL-ALT-DEL and the system will reboot, but nothing I know to do will get me past the purple screen and the Ubuntu logo. DI'm using a Dell Studio 1 desktop computer. It's got a 2.5ghz Pentium processer, 4gb of RAM, and a 400gb HDD. I don't dual boot, and Ubuntu is the only OS installed.
View 6 Replies
View Related
Dec 4, 2009
I am a Linux newbie and did one successful install Ubuntu 9.1 32 bit on my old desktop. Encouraged by that success (and the ease of it), this week I built my own system, which will be my primary system. I am trying to install Ubuntu 9.1 (AMD 64 version) and after the partition selection screen (I chose to partition the entire disk), I immediately get a white blank screen. Then nothing happens. I also tried with Ubuntu 9.1 32 bit, XUbuntu 9.1 64, Ubuntu 9.04 all had the same results.
Not sure if the hardware specs are required, but here they are:
1) Motherboard: MSI KA 780 G
2) Processor: AMD Athlon II X4 630
3) Memory: Corsair 2 x 2 GB, 800 MHz twinx 6400 c6
4) Harddrive: Hitachi sata 300, 1 TB
In desperation, I have started windows XP installation and that seems to progress fine at its leisurely pace. Its formatting the drive right now. During one of the attempts, it did install something*, since after that I see a new ubuntu partition after that. But when I boot from hard disk I get a black screen with cursor. I tried to search thru the forums and nobody seemed to have this exact problem, one guy got a white screen with cursor after a graphics card install, which is not the same. I dont want to go back to windows.
View 11 Replies
View Related
Mar 6, 2010
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies
View Related
Feb 10, 2011
Has anyone managed to do a dual boot with W2K and a linux system without a resulting blue screen of death on the Windows partition? What I mean is only W2K and Linux, not one with XP. I think there is a difference in the bootloaders of XP and W2K.
View 3 Replies
View Related
Feb 16, 2011
I am having a re-occuring problem with Grub. The problem seems to occur about once every 15 or so times that I start up. Basically, it gets past the Samsung branded screen but before it goes to the Grub screen, the computer will restart - it just continually gets to this point and restarts until I shut down with the power button. The problem is easily fixed by re-installing Grub using an ubuntu CD. Things will then run fine for about a week and the same problem will occur.
View 1 Replies
View Related
May 4, 2011
I just dusted off my old Compaq Prezeio 900Z. Unfortunately, when I try to install Ubuntu, it screen freezes on me and the computer restarts.
View 9 Replies
View Related
May 22, 2011
I just recently installed Ubuntu 10.10 on my computer. Everything worked fine at first and then I started to fix all things I wanted to have on my laptop, programs and layout etc. And then I decided to restart the computer to make all the updates and installations work properly on my newly installed Ubuntu computer, but then it seems so that everything just crashed. When I started to computer again a blue screen saying "Memtest86 v4.10" came up. It is some sort of test of the computer's capacity I think. So I thought, ok fine, it is probably really good to do a test like that after a new installation. Like, standard procedure perhaps. It took 1 hour and then it said that no errors could be found on the computer and that I could click ESC to continue.
I did that but then when the computer restarted this blue screen showed up AGAIN and started up a new test (the same one)!!! I can't open up Ubuntu, I've tried several times. What should I do??? Is my computer broken now????
View 6 Replies
View Related
Mar 9, 2011
I just finishing burning ubuntu on my laptop and was getting ready to partition my disk to allow space for ubuntu. I restarted my computer and when it was restarting ubuntu logo came up (as it booted from the disc). I was not wanting to install it at this moment so i was waiting for it to load then cancel it(just like a windows installation).It then froze and became pixelated with green and white colours.I thought it was nothing maybe just an error in teh disc. I waited 5-10 minutes then held the power button to shut it off. I then went to settings in the bios and changed it to boot from hdd first. After restart, windows began to load for like 3 seconds then blue screen. I dont know what went wrong or why this is happening.During installation of Ubuntu on my second try I keep getting:sudo: can't read /etc /sudoers: Input/Output errorsudo: no valid sudoers sources found, quittingWhat are the odds of me still having my windows 7 data?and could Hiren's boot cd help?
View 5 Replies
View Related
May 6, 2010
I initially had problems with the install CD giving the purple screen of death (a screen of vertical purple lines), however I managed to press F6 and set nomodeset and then add "xforcevesa no splash --" to the boot parametres (I guess) and I was able to boot into the live CD. Now however, I've installed 10.4 and I'm back to the purple vertical lines. My Dell 6400 laptop has an nvidia 7300 video card which must be the problem. My question is, how do boot into some kind of low graphics mode so that I can install the proper video drivers? I've been pressing shift to get to the grub menu, but the recovery mode only gets me the purple vertical lines as well, and I don't know what I'm doing.
View 7 Replies
View Related
Jun 8, 2010
I come bearing a question that I hope I can get some info on. Here's the situation: I installed Ubuntu 10.04 Netbook Remix on my Acer Aspire One (didn't want it, but got it for free). I installed and am dual booting it with windows 7 basic. Both worked fine until this morning when the laptop ran out of battery and shut down.Now, on start up, the BIOS screen flashes, and its not the same BIOS screen, but I can't tell what it says, its moving too fast, the laptop then restarts. This problem may be bigger than the linux part of it
View 9 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Dec 8, 2010
I turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
View 14 Replies
View Related
Apr 16, 2009
I've been trying to install Fedora 10 Core to a new my machine. The live CD appears to boot, but once I get beyond the selection stage (installing or running Fedora from the disk first), I invariably get a fully white screen. Nothing I've tried to do changes this. Although I'm reasonably experienced with the command line, I've never tried to do a GUI-less install of a full OS, and am unsure how/if to begin with Fedora. Any suggestions for either fixing the white screen of death, and/or installing from the command line would be a big help.
View 3 Replies
View Related
Jun 26, 2011
I don't really have any Linux experience. But I wanted to try it out. Now I'm afraid I did not set this up properly. Grub gives me 3 options:
Fedora (2.6.38.8-32.fc15.x86_64)
Fedora (2.6.38.8-26.rc1.fc15.x86_64)
Other
When I select <Other> to boot into windows... it starts to try to boot... but then flashes a quick blue screen & restarts. I tried to boot into Window's normal mode, safe mode, and command line... all just restart fdisk -l gives the following:
[Code]....
View 4 Replies
View Related
May 1, 2010
I have a problem with my graphic interface, it wont work any more, its just black i cant type password and login to get in the session, what can i do ?
View 9 Replies
View Related
Dec 16, 2010
I followed a tutorial to install XP across my entire HDD. I installed Ubuntu 10.10 "Alongside another OS". Ubuntu loads fine, but when trying to load XP, the boot screen shows up, but then the computer restarts and returns to the GRUB menu.
I saw some threads on this site and tried to type: sudo gedit /boot/grub/menu.lst
In the terminal. It returned a blank text document so I'm not sure if that information was outdated. I then typed: sudo fdisk -l
And got this:
Not sure what any of this means, but I sure hope someone else does. I would say forget XP, but it's hard to let go of some of the games and software I use. I appreciate any responses, thank you.
I tried to format the table as it appeared, but the forum corrected the extra spaces.
View 7 Replies
View Related
Oct 1, 2010
Alright guys. I need to find a way to enable a black screen screensaver (or turn off the monitor, or something to avoid burn in) while the machine is sitting at the login screen and completely turn off the ability for the computer to sleep. how I can accomplish that?
View 1 Replies
View Related
