i've activated userdir with (sudo a2enmod userdir) at ubuntu 10.04. i can not open my php files via web browser at public_html directori (screenshot.png). but if i move it to /var/www ... it's works (screenshoot-1.png).
View 5 RepliesIceweasel will not start, saying :
(process:12904): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
Error: Access was denied while trying to open files in your profile directory.
but only for my userid. What home directory resources are required to start?
I've got a strange problem and not found any solution on web.
System: ubuntu 10.10
server: apache2 v2.2.16
I want to use the users public_html directory to run php scripts, but... in browser I get only downloading window to save. The apache2 is working in default directory (/var/www/index.php appears normally), but not in public_html. Tried a lot of solution from web and from this forum also, but still doesn't work correctly.
[Code]...
I cannot get apache to show the files in ~/public_html it gives me this error
Code:
Forbidden
You don't have permission to access /~george/test.txt on this server.According to the .conf file it should have read access...
Recently I mounted a larger partition into my home directory since I was running out of space, Everything went smoothly, but it caused me to wonder about something I cant figure out. While playing with the mount unmount commands when I was copying everything over... before editing my fstab.
Is there a way to access the files that existed in a directory before you mount a partition to that directory? after mount the original files are gone.unmount and they are back, Where do they go?
I have shared few webpages in /home/vinay/public_html directory and I have made necessary changes in /etc/httpd/conf/httpd.conf file
Code:
But how to access these pages through Browser. When I open the browser with
Code:[url]
It shows contents of index.html in /var/www/html which is default DocumentRoot
How to provide the URL to access webpages in /home/vinay/public_html directory.
the permissions for my home directory were accidentally changed from 'access files' to 'create and delete files', and I changed them back, but ever since then I am not able to change any preferences/settings at all. power management, themes, panels, emerald, anything. my user account is supposed to be the administrator, and all the user privliges are checked. how to get control of my computer back?
View 9 Replies View RelatedJust installed lamp, I can access phpmyadmin mysql is set up and everything. When I try to view a directory [URL] I get an access denied error.
EDIT: I changed the permissions of the "folder" folder itself, I can access everything in that directory now but not any other folders in it. Do I really need to go through every folder every time and change the permissions?
Code:
<html>
<head>
</head>
<body>
[Code]....
Alright this works fine to pull the directories/files in the /var/Store/2010/ directory.
But when you click on of the links it tries to http://'serveradress'/$filename
note that $filename in the url is the filename clicked on so the php script is working. but I need it to change to that dir so that you can see the folder/files there and work your way up/down/side wise thru the folder tree to where you need to go. Not try and pop it as a direct url which doesn't work.
I have a multi user system for my roommates and myself that has separate folders for each of us. I've got user authentication working with samba, but unless I set every file and folder readable/writeable by all users, I can't browse it or edit the files.This isn't ideal as the shares are open to other users access, so I'm hoping there's a way to keep folders at 750 and files at 660 while allowing samba users to browse, delete and edit.Also, the samba share is actually a mounted NFS share from another server. Both the NFS server and the Samba server have the same users/uid's. When a file is created from a Windows host via the Samba client, the NFS server's permissions do show that the correct user owns the files, but since the files aren't mode 666 but 640 I can't edit or delete the file.
View 4 Replies View RelatedI changed to wubi last night, i decided to go that way cause i was informed it was a safe way to try giving it a try for linux and ubuntu without any special effort needed to be payed and easily deleted if i am not pleased.Thankfully i am pretty satisfied with the results, i pretty much dealt with most of the issues i have faced so far successfully and i am running it ok beside one important thing.See i am using my laptop, which has a hdd of 250GB.On my Vista there are 2 different hdd C+E by default, they separated my hdd.So while i have windows on C and E is pretty much used for my additional data(see movies, music etc) when i installed wubi i installed it on E, thought it would be better and it had more space.
Now though, while i can access threw ubuntu all my files that were located on C(vista) i cant access any of the E ones, and search file dont helps either.The "vista hdd" as ubuntu describes it, its a 250 gb disk on computer, which means it should contain both of the vista disks.But sadly thats not the case.i cant seem to be able to find them anywhere.
How would i go about copying files to a directory, yet skip the files that already exist in the directory, and also remove the files that are in the directory. For example:
Code:
$ls /dir1
img001.jpg
img002.jpg
[code]....
Now i would like to copy from dir1 to dir2, but the contents of dir2 would be:
Code:
$ls /dir2
img003.jpg
I tried upgrading to 10.04, and now when it boots it just goes into a grub2 terminal and doesn't display a boot menu. I tried re-installing grub2 from the live cd, but that didn't do anything. I figured if I've hosed the last install I'll install from scratch, but I can't even access my files from the live cd! I did a bit of searching and everyone seems to just encrypt ~/Private, whereas I've encrypted the whole home directory. So much for security... In the live cd, it has a readme.txt and says to type "ecryptfs-mount-private" to access the files, but it just gives the error "ERROR: Encrypted private directory is not setup properly". What do I do?
View 3 Replies View RelatedHi,
Can you help me to install OpenCS PKCS on Ubuntu 10.10 with Firefox 3.6.
I have smard card reader Gemplus
Here is error:
HTML Code:
dejansoftware@ubuntu:~$ pkcs11-tool --show-info
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
[code]....
I had errors pop up when I tried updating my 10.10 to 11.04 so I ended up having to do it from a Live USB which installs it over everything (fine by me).Unfortunately I forgot I had an encrypted /home directory. So various messages and stuff came up when I tried to log in.nfortunately I don't remember what my encryption passphrase is offhand, so I moved it to a slightly different folder name and had to have a new directory created for my username.It's still there, but how can I try to open it trying the various versions of the passphrase I think it may be? Can I double-click it and try?Also, in the future what is the best way to handle a "fresh" install that I want to connect to my encrypted /home directory?
View 4 Replies View RelatedI have created ftp user in vsftpd.
I want to know how can I allow it to access the home/documents directory as all files will be hosted there in the same directory and its subdirectories?
My ftp user name is mesk...
I've tried a couple times to install from a tar.gz file and when i try to compile the source code in the terminal I get this error "tar: bash-4.2.tar.gz: Cannot open: No such file or directory" what am I doing wrong? Now when I download the files, I leave themin the down loads folder, do i need to make a new directory? If so how do I do that and how do i call it up when I compile the sopurce?
View 1 Replies View RelatedI was attempting the pear installation as per the instructions given here:url
I think i got the installation correct.
Then i tried this program
<?php
require_once 'System/Folders.php';
$sf = new System_Folders();
$home = $sf->getHome();
echo "$home
";
?>
and compiled it as follows:-
php spear.php
to get the results as
Warning: require_once(System/Folders.php): failed to open stream: No such file or directory in /var/www/spear.php on line 3
Fatal error: require_once(): Failed opening required 'System/Folders.php' (include_path='.:/opt/ZendFramework/current/library:/usr/share/php5:/usr/share/pear') in /var/www/spear.php on line 3
how should i correctly set the path in /etc/php5/apache2/php.ini
or how correct is my path statement
include_path = ".:/opt/ZendFramework/current/library:/usr/share/php5:/usr/share/pear"
in /etc/php5/apache2/php.ini
So when I click Places in the Main Menu and then any directory like Desktop or Documents or Pictures the Movie Player starts, and all the files that the directory contains are in the playlist. The only way around is to click Computer which would bring me into the file manager as normal.
View 2 Replies View RelatedI am using a Dell Inspiron 14R laptop that came with Windows 7 Home Basic. The partitions of my hard disk before installing Fedora 15 were:
Dell (OEM Partition)
OS (C: ) (Primary Partition)
RECOVERY (Primary Partition)
New Volume (E: ) (Logical Drive)
I tried shrinking my C: drive (which has Windows) but couldn't do so hence performed the procedure on E: instead. I did this to create a 15GB unformatted space to install Fedora in. While installing Fedora, I chose the option "Use Free space" under Disk Partitioning Setup but the OS got installed in E: drive. Currently, I am able to use both Windows and Fedora under dual-boot but the problem I am facing is that when working with Windows, I am unable to see drive E: in Computer.
Windows Disk Manager is able to detect the partition and is showing it to be healthy (1st screenshot). Its name now is New Volume and neither am I able to change its path or letter (Error: incorrect parameters) nor am I able to check it using "chkdsk" (Error: cannot open volume for direct access/ GUI doesn't work as well) (2nd screenshot). On the other hand, I am able to access both the partitions in Fedora.
Another point to mention is that after finishing the installation of Fedora, when I started Windows, the Disk Manager as well as Dell DataSafe showed that the Windows Recovery drive had been formatted (maybe inappropriate terminology!) and was no longer retrievable. To rectify this problem, I restored my Windows to before Fedora was installed and I seem to have got the Recovery drive back (1st screenshot) (before doing this, it was nameless and empty).
There are millions of files in many directories. Wherenver i try rm * or find or use xargs, they say 'argument list too long' and exit. How can i deleted files in a directory with so many files without deleting the directory itself.
View 3 Replies View Related1. yum install vsftpd
2. service vsftpd start [ok]
3. nmap from outside verifies tcp 21 is open for business
4. ftp myipaddress.com results in login failed for user root.
I want to login as root and have access to '/' as my home directory. What do I have to do to get this to work?
I downloaded a game,and i tried to pen it with the gedit program...it says that i should change something unicode and the second one... :Si tried that but it didnt work.
View 2 Replies View RelatedI have a Dell R310 server, and on my old server (Dell PE SC1420) I had the steam server installed to host for counter strike and other games, so when I got my new server, I downloaded the installer for steam, which was originally in a .bin, so I did these commands to install it:
[Code]...
I am running VMware inside windows 7 64bit.I have installed ubuntu 2.8 ultimate edition on a 20gb partition and used 1gb of ram....everything is updated etc and running good. I checked in the VMware tools bar the entity tab,and says tools is not installed.
So when i run the install everything goes well untill it reaches the point where it says "What is the location of the directory of C header files that match your running kernel?
I have tried everything,different tutorials,installed a build package etc and it still asks for the directory. here is the uname r output :
uname r : 2.6.35-24-generic
I only began using Linux with the release of FC8. I've upgraded into every new version (upgrade, no clean installs), after the new versions had been out a while. I struggle with command lines, updates, cups and other very cool tools that are only difficult because they have so many options. I'm Windows guy at work, a system admin and db administrator, plus the company expert on Excel. But, all in all, I hate Windows, and I'm loving Fedora, even if I struggle.
This last upgrade really kicked me in the pants. The first thing I noticed was all of my software sources were gone. I did some research around the forum and tried a few things, but it's still not working. Unfortunately, I may have uninstalled Yum in the process, but not rpm. I've tried to re-install the yum packages, but still no luck.
This morning before leaving for work I noticed that a boot log indicated that cups had failed. I went in to restart the service (through gui) and it said it was running. So I stopped the service and re-started. I tried to access port 631 through Firefox and it wouldn't open. I need to check the firewall to see if it's an open port, but beyond that I don't know.
Now I'm wondering if I should just do a clean install. I haven't done this, mainly because I didn't want to hassle with setting up my printer again (although, it's a Brother and they have the drivers and good instructions), and I didn't want to lose any emails that I've received via Thunderbird. The printer is really a non-issue now, as I'll have to set it up anyway. I have a backup of the /usr folder and all the documents. Question is, if I restore the Thunderbird folder after a clean install, would it bring back my email?
Power in my house went down while I was working on my computer and now I cannot boot anymore. It comes to a screen where it says
Code:
error: unknown filesystem
grub rescue >
[code]....
i've just installed 10.04 lts onto an external usb drive and everything seems to be working smoothly - except i cant work out how to access the other files on the usb drive. - i used the wubi installer to install ubuntu onto the drive.
View 4 Replies View Related[URL].i used to configure the public_html in my system using the above link. but i did not get the phpinfo page if i run the it will ask download the phpinfo.php file. why this was asking and not showing the public_html files.
View 5 Replies View Relatedthey keep coming up with Error: To many open files but none of the files in them are open?
View 4 Replies View Related