Iceweasel will not start, saying :
(process:12904): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
Error: Access was denied while trying to open files in your profile directory.
but only for my userid. What home directory resources are required to start?
Starting around two weeks ago, Iceweasel began closing at unpredictable intervals for no apparent reason. When I ran it in GDB, it came up as a segfault, though the backtraces were different each time. It would even do this in safe mode, though it generally took longer. Icedove began doing the same thing around the same time.
So, I decided to reset my profile and start over. But now it's still segfaulting, even in safe mode.
A cursory use of memtester didn't turn up anything unusual.
Could it be some browser addon that is causing problems even when it's not activated?
If so, why is Icedove doing the same thing occasionally?
The biggest problem is that it's intermittent, so I would have to use my browser with a new profile for a long time before I could confirm that the problem is actually fixed.
Is there something that has changed from Windows 10 to Windows 10.1?
So on my computers I have Linux/OSX + Windows
Typically I have housed the FF profile (and TB for that matter) on the NTFS partition. This has worked for many years and so no matter which OS I load, I start of at the same place I ended.
But since I installed Win 10.1, I don't use Windows that often, but when I do I feel that for some reason, FF is not picking up the profile info. Add-ons are missing. Session restore not the same. (There are similar issues with TB as well).
I'm trying to figure out Apparmor,in doing so I've seen that there are no pre-configured profiles for Iceweasel,but there are two for Firefox in /usr/share/doc/apparmor-profiles/extras/ : Will it work if I simply replace "iceweasel" for "firefox" and set those profiles to complain mode,just to see what will eventually happen? Is that too obvious?
View 9 Replies View RelatedI am using Debian GNU/Linux 7.8 with Linux 3.16.0-0 (x86_64) from backports and XFCE. I am using nautilus for the default file manager because thunar is not able to connect to server. My problem is that when i want to upload a file from iceweasel, the bookmarked webdav location on nautilus is not shown. This mean that iceweasel doesn't use nautilus? If so how to change this? Nautilus is checked in the default programs.
View 0 Replies View Relatedi've activated userdir with (sudo a2enmod userdir) at ubuntu 10.04. i can not open my php files via web browser at public_html directori (screenshot.png). but if i move it to /var/www ... it's works (screenshoot-1.png).
View 5 Replies View RelatedI would like to install wordpress on fedora 14.so I downloaded the packages needed to install apache+php, and I saw the site is located in the directory /var/www/html.I unzipped the wordpress archive to this directory but when I enter the address "http://localhost/wp-admin/install.php" in the browser (firefox launched from the command line as root) I have the error message : ****************************You don't have permission to access /wp-admin/install.php on this server.****************************do you know what thing I have to do in order to make the directory available?
View 2 Replies View RelatedWhen I download a file, lets say text file I want it to open straight away in iceweseal.So in the "open With" dialog box if I choose iceweseal it is not opening the file in it. It just downloads the text file.
View 6 Replies View RelatedWhen I try to open two times Iceweasel I get this:Iceweasel is already running, but is not responding. To open a new window, you must first close the existing Iceweasel process, or restart your system.I am very suprprised, because in Windows xp I can open mozilla firefox 2,3 or more times.
View 4 Replies View RelatedI would like to make iceweasel to restart after close, so its always running.
View 14 Replies View Relatedat a particular spot on your screen on Debian Lenny xfce4 64 bit?
View 6 Replies View RelatedStep 1. Opened emailStep 2. clicked on "download" to download the text file.Step 3. The "open With" dialog box popups.Step 4. in the open with option I browse and select "iceweseal" as the application to open with.Step 5. It does not open any file in iceweseal 3.X It is not just with text file but with anything. So it look like the iceweseal does not want to open from the open with" dialog box.
View 2 Replies View RelatedI use LXDE and in the "preferred applications" I set icedove and iceweasel as preferred mail and internet applications but when I click on an e-mail link(craigslist in my case) not only does Icedove not open, but in Iceweasel HUNDREDS of blank tabs open up rapidly and it is difficult to kill the program. This is unlike any problem I've ever encountered so I'm not going to pretend I have a clue here. As I am familiar with Thunderbird in an other distro I would prefer to stay with IceDove.
View 9 Replies View RelatedUntil recently I had no trouble reading PDF files in Iceweasel. Acrobat Reader would open without prompting. Now, after a recent re-install of Jessie, that does not happen. The browser just freezes when I point it to a PDF file. Reader is installed and shows up among Iceweasel's add-ons.
View 7 Replies View RelatedI learned that, even while on Linux, using Iceweasel/Firefox 3.0.6 is not safe. So I tried to update the browser for my PPC G4 iMac (256 MB RAM, 800 MHz processor).
1. I downloaded a backported Iceweasel .deb from URL...
2. I then tried to install it with dpkg -i PathToIceweasel.deb
3. There was an error. I remember seeing xulrunner-1.9.1 is not installed. I tried to install that with apt-get but it was not available.
4. Now when I click on web browser I get the error "Failed to execute default Web Browser: Input/Output error".
5. What can I do without having to reinstall?
I am somewhat new to Fedora, only having F13 for 2 months and F12 about a year ago on my dieing AAO. Anyways...I am trying to get the Apache web service up and running. Type in http://localhost and I get the Apache welcome screen. Now I try to add my webpages to /var/www/html/ and it says Error Moving File: Access DeniedI tried to find where to login in as root and find nothing. I am VERY unfamiliar with command line prompt other than for the yum installs
View 7 Replies View RelatedEven if im logged into root I cant edit or view any files. Like if I type /etc/rc.conf in Arch it, says "permission denied" so how do I edit this file cuz I need to put gdm and dbus in my daemons
View 2 Replies View RelatedRecently I mounted a larger partition into my home directory since I was running out of space, Everything went smoothly, but it caused me to wonder about something I cant figure out. While playing with the mount unmount commands when I was copying everything over... before editing my fstab.
Is there a way to access the files that existed in a directory before you mount a partition to that directory? after mount the original files are gone.unmount and they are back, Where do they go?
I have downloaded Firefox 45.0.1.
I put the unzipped contents into my home dir.
I ran fire fox 45.0.1 with no further action - without installing Firefox 45.0.1.
All that is needed to run Firefox 45.0.1 is in place from Ice weasel.
Question: Will there be any ill side-affects by using the files from Ice Weasel to run Firefox 45.0.1? Should I UN-install Ice Weasel and install Firefox 45.0.1?
One side-affect that I have observe is that I can not make Firefox my default. Every time I start Firefox 45.0.1, I get a pop up asking if I want to make this my default browser.
I have same problem with *.bin files.When I try to install software from *.bin file I see error:
Code:
[andrew@notebook Programming]$ ./installbuilder-qt-professional-6.3.0-linux-x64-installer.bin
bash: ./installbuilder-qt-professional-6.3.0-linux-x64-installer.bin: Access denied
[andrew@notebook Programming]$
When I run command ls -la I see this:
Code:
[andrew@notebook Programming]$ ls -la installbuilder-qt-professional-6.3.0-linux-x64-installer.bin
-rwxrwxrwx. 1 andrew andrew 82624164 Апр 4 16:39 installbuilder-qt-professional-6.3.0-linux-x64-installer.bin
[andrew@notebook Programming]$
This error exist if I try to install this application with root access. What I mast do for fix this error?
P.S. I have Fedora 12 x86_64 on my notebook ASUS M51Sn.
I have my ubuntu comp setup as a media server and works fine with mythtv etc but I also want to access the files from my computers in the other rooms (most have windows 7). I was able to share the file containing the videos easy enough by right clicking the file and checking all of the sharing options the first time. I have been able to access all the files that i originally put in the folder and stream video to my other computers without issue.
However any new files I add to the folders I am now unable to access. The files show up but when I click on them it says I don't have permission. I have tried unsharing the folder and redoing it but I come to the same issue. I am sure I am just forgetting an easy step but I can't think of what that is. Also want to make sure that any new files I add to this folder will work instantly across the network.
I want to forbid a user to make changes to preferences of iceweasel, specifically to modify proxy settings of the browser. Although user should still be able to use the browser.
I assume these settings are stored in some file on a harddrive? If so, what is this file and can i simply make it read-only for users? Or any other solution?
This is about the Squeeze (0.2.3-8) archiver in Debian Squeeze. I may be missing a dependency, but is Squeeze incapable of opening files inside archives? I created a generic archive with "tar -cvf arxiv.tar file01.txt" and Squeeze segfaults when I try to double click to open the file (file01.txt) stored in the archive (arxiv.tar).
Also, after experimenting with Squeeze on the command line, it seems the "-n" option works, but results in an orphaned gui window; the "-x" option will only extract to a directory which already exists (which is o.k., but should be documented); and the "-d" option doesn't follow the general syntax in the man page "squeeze [OPTION...] [archive name]", which isn't bad, but sure does make it unnecessarily cumbersome to use, and also, the gui runs (blinks for a split section) for no clear reason. Now it would be silly to use command line squeeze over tar, but the man page for Squeeze begins with: "Squeeze - modern and advanced archive manager for Xfce".
I would like a gui archiver/extracter to use with Xfce4 without all the QA problems. Unless I'm doing something really wrong, this software doesn't seem to be ready for release at all, and the upstream version has not changed in a long time.
I am running Debian testing on my box and iceweasel 5 with several addons. My question is the following: is there a way to export above all my addons settings to a file? I would like to be able to install on another debian machine the same iceweasel 5 and have the same addons installed (if I could have even the same toolbar it would be dream) automatically.
View 1 Replies View RelatedThe web browser cannot handle Google's new map layout as I experience complete freeze effect when trying to navigate in Street view. This has happened before on the same browser in its older version.
View 3 Replies View RelatedI have been a casual Debian Wheezy user for quite some time now. And one of the things that alarms me is that how does Iceweasel keep itself up to date on the latest secuirty patches ? I also use Windows on my desktop and it is dual booted with Linux. In Windows I use Nightly build of FireFox. They update themselves almost everyday. Normal Firefox also seems to update pretty often. But Iceweasel only updates if I do an aptitude full-upgrade
And that is also once a month. So how is Iceweasel expected to be secure if there is such a long delay in the patches ? Iceweasel also does'nt have a "Check for updates" options like Firefox.
Won't we be better off using the normal Firefox on Debian distributions ? IMO that gives faster patches for security issues.
Also does Iceweasel use Flash Player or gnash ? Because running dpkg gives me the following output-:
Code: Select allsreyan@debian:/usr/share/dict$ dpkg -s gnash
dpkg-query: package 'gnash' is not installed and no information is available
Use dpkg --info (= dpkg-deb --info) to examine archive files,
and dpkg --contents (= dpkg-deb --contents) to list their contents.
Flash Player also has individual updates in Windows which is maybe once every 2 weeks. I also don't see that in Debian. Flash players need to be kept up to date since they are responsible for most security breaches.
I had started a thread some time ago where a user commented that Iceweasel was out of date and needed to be replaced by Firefox. [URL] .....
So why is the Debian community still sticking to Iceweasel ? Why not switch to Firefox like Ubuntu ?
Iceweasel uses to much computing resources without reason.
In my desktop, where I keep some system monitoring tools at close view, I could notice Iceweasel extensively using system resources, but of course memory is expected from whatever is being loaded on the webs, cpu however, it kept a steady 18% on my 6 core AMD FX6300, this is enough to keep the processor's temperature a whole ~20℃ above idle.
Since then, I've installed a proper watercooler to keep temps reasonable in this hot CPU. But still, that’s too much processing required for webbrowsing alone, and this is not considering heavier stuff like flash, youtube and etc.
Compared to KDE's proposed browser konqueror, and an new alternative Qupzilla, they're much lighter and consequently much faster.
can someone tell me where the iceweasel plugin dir is? ~/.mozilla/plugins/ doesn't work, nothing shows up in about:plugins.
View 3 Replies View RelatedI'm running Iceweasel 5 and love it.
View 1 Replies View RelatedWhen login through root on HP-tru Unix server, I am trying to access a directory, it is saying "Permission Denied".. Also, an sh file is also not able to execute through same root access..I have checked the permission of the directory as well as for sh file through ls-ltr.. It is also fine.. Root System rwx-rwx-rwx--What could be the possible cause, and how to correct it..
View 1 Replies View Related