Ubuntu Installation :: Gain Access To Encrypted /home Directory?
Jun 6, 2011
I had errors pop up when I tried updating my 10.10 to 11.04 so I ended up having to do it from a Live USB which installs it over everything (fine by me).Unfortunately I forgot I had an encrypted /home directory. So various messages and stuff came up when I tried to log in.nfortunately I don't remember what my encryption passphrase is offhand, so I moved it to a slightly different folder name and had to have a new directory created for my username.It's still there, but how can I try to open it trying the various versions of the passphrase I think it may be? Can I double-click it and try?Also, in the future what is the best way to handle a "fresh" install that I want to connect to my encrypted /home directory?
View 4 Replies
ADVERTISEMENT
Apr 21, 2010
I tried upgrading to 10.04, and now when it boots it just goes into a grub2 terminal and doesn't display a boot menu. I tried re-installing grub2 from the live cd, but that didn't do anything. I figured if I've hosed the last install I'll install from scratch, but I can't even access my files from the live cd! I did a bit of searching and everyone seems to just encrypt ~/Private, whereas I've encrypted the whole home directory. So much for security... In the live cd, it has a readme.txt and says to type "ecryptfs-mount-private" to access the files, but it just gives the error "ERROR: Encrypted private directory is not setup properly". What do I do?
View 3 Replies
View Related
Nov 7, 2010
Apparently after an upgrade, I lost access to my encrypted home directory. Looks like upgrade scripts changed the scripts that mounted my encrypted home directory. As I don't have my ecryptfs password handy, is there any way to revert the things back as they were? I have liked Ubuntu all the way but after this upgrade-mess-up, I might change my view.
View 3 Replies
View Related
May 1, 2010
I have installed Kubuntu 10.04 x64 from scratch using the alternate installation CD and unfortunately I'm experiencing some serious troubles. Everything worked fine, installed packages, moved my backed-up data to my encrypted /home partition - until I rebooted. Usually I reboot the system right after the installation process to see if the boot process shows any errors, but what can I say, seems like I forgot to do it this time .
The problem is that the boot process just "hangs" right before the login window should disappear. By "hang" I mean dead: no switching to virtual terminals, no CTRL-ALT-DEL - the system just freezes.
I'm quite familiar with doing things shell-wise, so I started the "Rescue Mode" from the alternate CD and was able to mount my root partition.
Problem #1: No faulty log entries whatsoever: dmesg, boot.log, messages etc. all looking fine - except Xorg.0.log. I suspect the proprietary Nvidia drivers to be the culprit here, because what I'm getting is: "Caught signal 11 (Segmentation Fault). Server aborting"
Running "startx" as root from the rescue shell gives the same results: complete system freeze. "Looks like a reinstallation candidate, let's just backup my data" I thought, which brings us to
Problem #2: I can't mount my encrypted /home from the rescue shell. The exact steps involved are:
Mount my root partition and chroot to it. Issuing "ecryptfs-mount-private" gives the following error message: "ERROR: Encrypted private directory is not setup properly" Becoming my user "su - faulty" and trying step 2 again yields the same results. I feel like I'm almost there: I'm executing commands in my root environment, just can't seem to access my data which I'd like to backup before doing a clean reinstall. Any thoughts?
View 3 Replies
View Related
Jul 28, 2011
I just tried reinstalling ubuntu 11.04 from the live disc, installation went well but afterwards I cannot get access to my home directory which is encrypted and I stupidly forgot to note the mount passphrase. is there anything I can do? where would the mount passphrase be stored from the previous installation and is there any chance of recoving it. Home and the root are on the same drive and the installation did not format the drive.
View 9 Replies
View Related
Aug 26, 2010
I have Ubuntu Karmic. I chose to install with an encrypted home directory. Recently I got a warning that I only had 2GB of drive space left. This is mostly because of my videos. So I went and bought a new hard drive and partitioned it and made 1 ext4 partition and copied my videos all to the new hard drive. I added a line in my fstab to mount the new hard drive to ~/videos, but when I reboot the computer, there is a screen saying something like "error mounting /home/me/videos, press S to skip or something else to reboot". If I press S to skip, then when my system comes up there is a video directory but it's empty because my other hard drive didn't get mounted. I can run sudo mount /dev/sdb video/ and it will mount fine and I can see all my videos, so why can't fstab mount it? Does this have something to do with my encrypted home directory?
View 14 Replies
View Related
May 21, 2010
I ran fsck on the wrong partition (which was mounted) and in my haste blew up the file system on that partition. Now here's the kicker, I had 450Gb of data and documents on that partition that was in an encrypted home directory. So the long and the short of it I ran fsck again and I was able to recover all the files, and they are now residing on a Lost+Found folder on my hard drive.I have located the encrypted files, but I don't know what to do with them.
View 1 Replies
View Related
Jun 7, 2010
my CPU passed away, got a new system, installed a new 9.04 and blew it up to studio. have 2 new disks and my old raid 0 lvm. mounted is ( lvdisplay) , user rights fixed fine. I do have my old login name and passwd in a book. How can I open the data it was the old encrypted home directory. I have an icon "Acess your private Data" and something called link to Acess Your private data. There I can read link (broken) so the broke link is sorted out, as i do have now a directory in my home with the same name as it has been, /home/coconews/ and that is fine
View 1 Replies
View Related
Jun 18, 2010
Ubuntu 10.04 (64)I have a second drive (currently mounted as /disk2).I want my home directory (/home/jb) to include this second disk as JUST a separate 'folder' accessible from my home area.want the data on the second disk to be encrypted, (just like my /home/jb folder is now).I would prefer to 'blend' the second drive into my existing setup.I'm looking for the safest way to achieve this, don't mind editing fstab etc. or getting my hands dirty on the cli.
View 2 Replies
View Related
Jan 27, 2011
I have choosen to encrypt Ubuntu 10.10 during installation (no alternate installation). After some time of working properly I get following error message after I put in correct password :
"Could not update ICE authority file /home/surf1/.ICE authority"
When I click "ok" following error message is shown :
"there is a problem with the configurationserver (/usr/lib/libconf2-4/gconf-sanity-check-2 finished with status 256)"
When I click this "ok" next error message appears :
"Nautilus could not create following necessary files : home/surf1/Desktop,/home/surf1/.nautilus"
After I click here ok nothing else happen anymore and I get not access to my account and so to my data.
View 3 Replies
View Related
Jul 7, 2011
I installed Ubuntu Server because I want to learn Linux and I want to learn about servers. I did a newbie tutorial and then shut down. When I booted up today, the files in my home directory were replaced by Access-your-private-data.desktop and readme.txt, but I have no idea why. I followed the instructions in readme.txt and typed ecryptfs-mount-private. It told me
INFO: Your private directory has been mounted.
INFO: To see this change in your current shell:
cd /home/rmob
But if I do ls /home/rmob, it still shows me Access-your-private-data.desktop and readme.txt instead of the files I created there yesterday. Every time I reboot, it tells me
keyctl_search: Required key not available
Perhaps try the interactive 'ecryptfs-mount-private'
If I try ecryptfs-mount-private again, it still tells me it has mounted it, but still just shows me those same two files. Googling about this tells me this means the directory got encrypted somehow. I tried typing touch ~/.ecryptfs/auto-mount which I found in this tutorial, but it didn't make a difference and I can't find any other solution anywhere.
View 2 Replies
View Related
Sep 22, 2010
I've upgraded to my old dell from Xubuntu 9.10 to Xubuntu 10.04 and set up separate /home partition. I chose to encrypt the /home folder when I installed. I'm wondering if that's the quick answer for why I can no longer sftp from my Ubuntu Jaunty laptop. Both machines are on my desk, and I've been happily using ssh to get files between them before this. The Xubuntu machine has openssh server and client installed, the Jaunty machine has only ever had only the ssh client. Now I get a popup saying "Could not open location ..." and the sftp address, and "Host key verification failed." I've not done much with this new install, so I don't mind just re-installing again. I don't need an ecrypted /home, but I do want very much to be able to continue to ssh into that machine. Is it my encrypted /home that's causing this?
View 5 Replies
View Related
Feb 16, 2011
I had issues on my last install , I couldn't boot into it cause I accidentally uninstalled python 2.6 and everything it was attached to. So I reinstalled on a separate hard drive, I can see my other file system from the media folder but the only thing in my home dir isthese 2 files 1 read methatsaysPHPCode:THIS DIRECTORY HAS BEEN UNMOUNTED TO PROTECT YOUR DATA.From the graphical desktop, click on: "AccessYour Private Data"orFrom the command line, run: ecryptfs-mount-private and then this file Access-Your-Private-Data.desktopbut when I click it and try to run it I get thisrrorPHPCode:Untrusted application launcherThe application launcher "Access-Your-.desktop" has not been marked as trusted. If you do not know the source of this file, launching it may bensafe.
View 7 Replies
View Related
Oct 5, 2010
I am trying to open an encrypted home directory from opensuse 11.2 with opensuse 11.3. This means i have a user.img and a user.key So far i have done:
losetup /dev/loop3 user.img
cryptsetup luksOpen /dev/loop3 home
Enter passphrase for /dev/loop3:
No key available with this passphrase. At this point it will not accept my passphrase.
A luksDump reveals:
cryptsetup luksDump /dev/loop3
LUKS header information for /dev/loop3
[code]....
When i try to use the key file, i get:
cryptsetup luksOpen /dev/loop3 home --key-file home.key No key available with this passphrase.
View 3 Replies
View Related
Dec 12, 2010
I am having a problem setting up an encrypted home directory with openSUSE 11.3. I used Yast User and Group Management to edit an existing user to encrypt the home directory and the user.key and user.img files were created in the /home directory. I tried it out and logged in as user and created a new file. I logged out and logged in as a different user and was able to see the newly created file in the first users home directory.
I figured I did something wrong so I went back to Yast and deleted the user. I deleted the /home/user directory using file manager su mode. I tried again to create a new user with an encrypted home directory using Yast and now when Yast tries to write the changes I get an error: "pam_mount is already setup for user. Use --replace to replace the
existing entry." I do not know how to proceed from here except to try with a different user name as I do not understand what the error message means and what command to use --replace with.
View 1 Replies
View Related
Jan 3, 2010
Not using filename encryption when you create a new encrypted folder is easy, but how to disable it in the home encryption that is automatically set up by the Karmic installation CD?
View 1 Replies
View Related
Jul 20, 2011
I am running ubuntu 11.04 I'd like to encrypt my home folder. - how can it be done, without creating new user/starting from scratch. -I'd like to keep all the files and desktop settings - the only change should be that the folder is encrypted now.
View 2 Replies
View Related
Oct 10, 2010
I'm still running 9.10, but now would like to install 10.10. Now I'm wondering about how to keep access to my encrypted home folder.
Usually, I don't do an 'upgrade', but a fresh re-install. I have a separate /home partition, so normally this works just fine. However, my home directory is encrypted (a feature that was introduced with 9.10, I believe).
So, if I whack the system partition and do a fresh reinstall there, will the new install still be able to read my home directory? Or do I need to save a key file from somewhere?
View 1 Replies
View Related
Nov 25, 2010
I've done something a bit stupid. I've already encrypted my home folder and just set it to log in without requesting my password. When i do log in now, no startup sound plays, several error messages appear but no desktop. I think it's because I now don't have an opportunity to enter my home folder password, and it doesn't work at all. Is there any way to edit account settings from 'root' or anything because this really has crippled my computer.
View 2 Replies
View Related
Feb 1, 2011
1. yum install vsftpd
2. service vsftpd start [ok]
3. nmap from outside verifies tcp 21 is open for business
4. ftp myipaddress.com results in login failed for user root.
I want to login as root and have access to '/' as my home directory. What do I have to do to get this to work?
View 2 Replies
View Related
Nov 26, 2009
I just upgraded to Fedora 12 on my computer. Now I can't connect to the net. Under network I show the two connections (neither working). The "connect" and "disconnect" AND the "delete" buttons are all grayed out (?). I also can't log in as root to try to gain more access. Probably just a new way of doing things. I was upgrading from F7 so it was a bit of a jump.
Does the network utility work differently from 7? Am I now rootless? It would seem that my wifi card sees the net as I can see the routers out there, but can't connect. I'm sure I'm using the correct WEP.
View 5 Replies
View Related
Nov 21, 2010
I just installed the testing version of Debian with the option to setup encrypted home directories. I used a passphrase that I now want to change to something else. How do I do that?
View 4 Replies
View Related
Nov 26, 2010
I logged in to Recover Mode ("Drop to root shell prompt") this morning to do something. Naturally, I wanted access to my encrypted home folder.
The README file says to run ecryptfs-mount-private. However, that command returns an error:
"ERROR: Encrypted private directory is not setup properly."
This cannot be correct, because if I log in normally, I get my home folder without any problem.
How can I access my encrypted home folder when I boot via Recover Mode?
View 2 Replies
View Related
Apr 13, 2010
I'm using Mac OS X's Terminal.app shell to compile and run Fortran programs. One such program resides outside of my home directory (it is in the Applications folder, which resides on my hard drive but seems to be outside of my home folder). How can I navigate into this directory using Terminal.app to run the programs that reside there?
View 7 Replies
View Related
Jan 20, 2010
I grant read privilege to all the users to my .vimrc file . But my colleague still can't read my .vimrc file . I guess in addiction to give the read privilege to the .vimrc file, in some way I should give the person who want to read it the "access right" to my home directory first---which I don't know how to do it.
View 3 Replies
View Related
Jun 27, 2011
kernal 2.6.38-8 After updating Kubuntu-the log in screen will not progess to the desktop. It freezes and then shows the message "no write access to the home directory.." Goggling the problem - references to an .ICEauthority in my home directory are mentioned as linked to this problem. However "ls -la /home/charles" reveals that there is no .ICEauthority file present.
View 6 Replies
View Related
Apr 25, 2010
I purchased a larger hard drive to upgrade my HTPC running MythTV and a Samba file server. I put the old hard drive into an e-SATA enclosure and can still boot to it to access my files, but I can't seem to mount it correctly under the new installation to copy over my files even though I have the mount passphrase and encrypted filenames key.I have tried using this howto, but I run into problems with the encrypted filenames.This is how I'm doing it. I replaced the actual key data with A's and B's to protect my keys:
Code:
$ sudo -i
# ecryptfs-add-passphrase --fnek
[code].....
View 2 Replies
View Related
Dec 17, 2010
I'm wiping out / on an Ubuntu box but want to keep everything in /home/, which is mounted on a different partition. Using Code: ecryptfs-unwrap-passphrase ~/.ecryptfs/wrapped-passphrase I have unwrapped the passphrase, resulting in a ~25 character alphanumeric string. Is it possible for me to install from a disk and give the installer the (current) passphrase so that it will automatically mount my home directory?
View 3 Replies
View Related
Feb 26, 2011
I have a server running Ubuntu server edition with SMB server all set up and running. I've set up the main root of the drive to be shared and I've set up a user in /etc/samba/smbusers to say root = "joeflood" so I can sign in as root using the username "joeflood". This works and I have read/write access to the filesystem (yay!). However, if I browse to /home/javawag (my main user home directory), I no longer have write permissions! I can see all the files in there and read them no problem, but writing is a no-go. I'm logged in as root though?! Btw, I can login via SSH and create folders/etc as root in the /home/javawag folder, and they showed up in the SMB mount on my mac too.
View 1 Replies
View Related
Jun 23, 2010
I encrypted "/" and "/home" during boot with F12. Now I'm trying to install F13. The problem is it will not allow to specify /home as the mount point. It will take /home and not complain but when I get back to summary there is no mount point, just blank. When I entered the passphrase it didn't complain so I think that is okay. The / dir I said I wanted to format, so it accepted the / mount point.
I tried to go ahead and install F13 anyway thinking it may figure this out. However it didn't use my /home but created a new /home.
View 3 Replies
View Related
