[URL].i used to configure the public_html in my system using the above link. but i did not get the phpinfo page if i run the it will ask download the phpinfo.php file. why this was asking and not showing the public_html files.
View 5 RepliesI accidentally deleted a php file under my public_html folder. Is there a way I can get it back?
I typed: sudo rm contacts.php
I've got a strange problem and not found any solution on web.
System: ubuntu 10.10
server: apache2 v2.2.16
I want to use the users public_html directory to run php scripts, but... in browser I get only downloading window to save. The apache2 is working in default directory (/var/www/index.php appears normally), but not in public_html. Tried a lot of solution from web and from this forum also, but still doesn't work correctly.
[Code]...
I've just set up apache and can't make public_html dir to work. I followed this tutorial:http://fedoraphprails.blogspot.com/2...user-home.htmlAnd I'm still getting:Quote:orbiddenYou don't have permission to access /~gal/ on this server.Apache/2.2.13 (Fedora) Server at localhost Port 80
View 2 Replies View Relatedi've activated userdir with (sudo a2enmod userdir) at ubuntu 10.04. i can not open my php files via web browser at public_html directori (screenshot.png). but if i move it to /var/www ... it's works (screenshoot-1.png).
View 5 Replies View RelatedI'm planning on hosting a main website for my school (Wordpress) and a few websites (< 10) for some teachers (Wordpress, Moodle, Joomla). Someone of the teachers needs to access his/her folder via ftp to upload documents, images,... I'am using apache 2 on ubuntu server 10.04 LTS, 4GB RAM, 2 x 500GB Hard disk (RAID hardware).The server is connected directly to the router DMZ (netgear dgn 2000).
1)If I store the teachers' websites in public_html, should I create as many user as the teachers? And how to set permissions? And where to put the main site and moodle?
2)What are your recommendations about security?
I cannot get apache to show the files in ~/public_html it gives me this error
Code:
Forbidden
You don't have permission to access /~george/test.txt on this server.According to the .conf file it should have read access...
i want to move all files inside the folder moving to folder public_html which command i should use? m using centos5 64bit tell me full command which i should writer in ssh client..so my all files will be moved to public_html...from moving folder.
View 4 Replies View RelatedI run a small site and today I've discovered that my site is down. I found that cPanel has flagged the account suspended even though I haven't got any quotas on the account. I don't know what went wrong. I've tried to unsuspend the account in WHM but a certain part of the function failed.
Quote:
safe_userchgid: chown: /home/crocbits/public_html: Operation not permitted at /scripts/cPScript/SafetyBits.pm line 93.
After searching the internet someone mentioned that the problem might lie in the permissions of the public_html folder. I had a look at the permissions and the folder had no permissions d----- When I try to chmod the folder I get this error:
Quote:
chmod: changing permissions of `public_html': Operation not permitted
I have no idea what to do next. All the files in the directory are locked too. I tried to move them but this command isn't allowed either. I ran these commands under the 'root' user in SSH.
I have shared few webpages in /home/vinay/public_html directory and I have made necessary changes in /etc/httpd/conf/httpd.conf file
Code:
But how to access these pages through Browser. When I open the browser with
Code:[url]
It shows contents of index.html in /var/www/html which is default DocumentRoot
How to provide the URL to access webpages in /home/vinay/public_html directory.
My website can`t open because of the error, Parse error: syntax error, unexpected T_STRING in /home/dodonet2/public_html/includes/config.php on line 45.
View 8 Replies View RelatedI'm sorry if this has been posted already but I REALLY did look and couldn't find the same issue(s) addressed anywhere. Similar, but not similar enough, in my opinion, to barge in and switch the subject.
Ok, I have Apache httpd set up so I can use a public_html folder inside of my /home/username directory. Now, I'm about to take a web dev course that teaches JSP/Servlets for building web applications and I'd like to set my environment up so that I can execute .jsps from my web root (/home/username/public_html) just like I would a CGI or PHP script. I have a web host that will give me JSP support for a few extra bucks a month, but I'd rather do it locally... and free.
I have Tomcat installed and running wonderfully. The test page and all the examples work fine and execute immediately. But when I try to execute a .jsp file inside of my web root (/home/username/public_html) I just get the raw Java tags and plain-old HTML rendered in my browser. I pretty much knew that wouldn't work; that'd be way too easy. I just wanted to see what would happen.
I looked through all the tomcat ".conf" files I could find to see if it was similar to setting up httpd inside of my home directory, but I didn't have any luck. It's not a file permissions problem... I've been messing with web "scripts" long enough to check that the files are executable. All of the files needed (borrowed from the examples that come with Tomcat) were in their correct paths inside of my web root, as well. Added :8080 to the end of localhost (like you do to see the Tomcat test page(s) instead of the httpd test page) but that didn't help.
I scoured the web for directions but could only find one solution that was Ubuntu-specific (just install tomcat6-user-something-or-another.deb, which doesn't exist in the Fedora repos), then I looked around here, trying every search term that seemed reasonable to me, and I can't find anything.
I realize I can just write the code and put it in a directory that does allow these things to be executed (var/lib/tomcat6/blah-blah-blah/going-by-memory) and run them from there, but I'd like to be able to just keep all of my web files in the same place; a place where I have full permission to do whatever I want... my home directory public_html.
Is this possible (has to be, right?)? Is this a dumb idea to begin with (I'm prone)? What is the best way to develop JSP/Servlets without having to deal with permissions every time I want to put a new script in a directory outside of my home directory that's already set up to allow the execution of said script?
When originally installing 11.04 I had problems getting my Ralink 5390 wireless card to work.
Today my computer froze completely and I had to turn it off via the power switch. When I turned it back on, wireless was no longer recognized! My iPod can connect to the network just fine, so it must be an Ubuntu problem. There are no problems with my ethernet connection either.
I researched this and found several threads about blocking and unblocking wireless devices using the rfkill command. Well, unfortunately for me the rfkill command doesn't work. When I type sudo rfkill list or sudo rfkill unblock all, nothing happens; it just returns me to my bash prompt. I even tried uninstalling and reinstalling rfkill...nothing.
I have been looking around the forums searching for similar problems, it seems not only me had this problem. About a month ago I did a regular update via Upd Manager. The next day - no wired connection.Still managable, since the local library has wireless. Now that won't work either.Just after I upgraded from Jaunty, I accidentally removed NetwMngr from the top right corner of the screen, but that should not have anything to do with how the program works, right? I now cannot reach NM, if I run it from the terminal, nothing happens visibly.
View 5 Replies View RelatedI installed it on a Dell Inspiron 531 with the GeForce 6150SE nForce 430 built in video card. From the recommend driver list I installed �NVIDIA accelerated graphics driver (version current) [Recommended
Well, turns out it should not have been recommended. I had restarted and all I got was a low res ubuntu logo and a boot right into a full screen terminal. Tried startx and got a no screens found, I look online for about an hour last night and decided to just reinstall, which takes a couple hours when installing all the packages.
I have done more research today and found to install the latest linux x64 driver from nVidias website, which I did, but it does not run. I followed some more instructions and it said to do a �sudo chmod +x <file>� which I did, and it starts to open and I get �You appear to be running an X server; please exit X before installing.�
I�m starting to get a little frustrated here, guess I�m just used to a lot of the ease of windows and assumed that something like installing a graphics card driver would be easy.
I have a Dell Latitude D530 Laptop (500 GB HDD). Installed Windows XP and then Ubuntu 10.10 to do dual boot. everything works fine in Windows XP.In Ubuntu 10.10 I had issues connecting to Internet(Through Wirelss), I was able to rectify this issue by dsiable ipv6 from firefox about:config and setting true to network.dns.disableIPv6. After this I was able to connect to internet and browse websites from Firefox.But I am having Issues with Evolution Mail(Connection Timed Out) and Google Talk Client(Connection Timed Out).Empathy Internet Messaging gets connected fine.I was wondering if I will have to disable IPv6 System wide and hence I added the following lines to /etc/sysctl.conf
#disable ipv6
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
[code]....
I had an Ubuntu Server 32 bit installation and everything was working fine. Now that I installed Ubuntu Server 64bit on a new drive in the same machine, the ethernet card is not working!! This is insane cause when I put the hard disk with the 32bit installation back and booting from it, the ethernet card is working without any problems but in the 64bits installation it is not shown at all using "ifconfig -a"
lspci output:
Quote:
02:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0)
How can I check which module is being loaded in the 32bits installation to try to load it manually in the 64 bits installation?
I just installed the lamp stack and so far my default site is working. But a 2nd site I made is not working.I created the config file in /etc/apache2/sites-availableit reads:Quote:
<VirtualHost myip:80>
ServerAdmin webmaster@mydomain.com
ServerName mydomain.com
[code]....
I have very interesting problem after ~10 PHP Fatal error, php 5(latest one) in apache2(latest one) in Ubuntu Server 10.10(with latest updates) just do not work. So if try any php page it's not working(user see white page), but HTML still work fine.What that can be? So only restart apache is help to back php. (we are running Wordpress blog 3.1)
View 2 Replies View RelatedI had a problem with apache2 and getting .htaccess working. I have done some things and i believe its working the ErrorDocument command is anyway. I believe there may be some problems with the rewrites though.Im trying to take a urlhttp://localhost/showthread/123and make it display whats on http://localhost/index.php?showthread=123The rewrite rule is Quote:
Options +FollowSymLinks
RewriteEngine on
RewriteRule ^showthread/([^/.]+)/?$ index.php?showthread=$1 [L]
[code]....
.m4a files not working in banshee but working in rhythmbox.
View 1 Replies View RelatedI can connect to the internet with wired connection. The switch for the device is on but this command "sudo lshw -C network" has the following results:
#
[sudo] password for nn:
*-network
description: Network controller
product: BCM4312 802.11a/b/g
[Code]....
I upgraded Samba to 3.5.2 to enable Windows 7 to log in to the PDC. ACL was working with the Samba 3.0.28a that came with 8.04LTS. After upgrade I can now log in to the domain with Win 7 but ACL permissions are not working on Win7, XP or anything. They still show on the server but any attempt to change permissions on the workstation fails with "Access is Denied" and only user/group/other permissions are doing anything. Anyone know what changes for the ACL were made between the two versions? I know they're working on switching to VFS modules but setting "vfs objects = acl_xattr"
View 1 Replies View RelatedOK so I set up a server yesterday and got ndiswrapper loaded on it with the appropriate driver, I edited the /etc/network/interfaces file to contact my router with it's MAC address, WEP Key, etc... So the problem is I can ping addresses like Google and Ubuntu Forums but I can't use apt-get to install or update packages. When I try sudo apt-get update I get a whole bunch of Code: W: Failed to fetch <address>Temporary Failure resolving <address>My Wireless interface is wlan0 and also I can ping my server from my other computer running Linux and my server can ping that computer too.
View 1 Replies View RelatedI have a strange problem for internet. My clients (winxp - S2) can't get internet.Let me explain my scenerios. Fedora 10 with lan (eth0) having direct internet from dsl model, client (XP service pack 2) can use samba shares using dhcp (wlan0) installed in Fedora 10 box. client can ping my linux box.Now problem is: client (dosbox) can ping the google ip address (i.e ping 74.125.39.106) but can't use 'ping www.google.com'. That means ping with ip works for internet from my client. My linux box can. I can use internet from FC10 but can't use iexplorer from my client to have internet. I have enable ipmasquarding in Firewall and dhcpd is running on wlan0 for dynamic ip address of my clients.Can someone suggest me what kind of problem having I? What should i do to success iexplorer for internet? what possibly am i missing?
View 3 Replies View RelatedI followed the sticky about setting up wireless and I have come to an issue where the WLAN switch which is on this computer can be pressed, the light comes on, but no WLAN. When I looked in dmesg, this is what I get:
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
firmware: requesting ipw2100-1.3.fw
eth0: Radio is disabled by RF switch.
When running iwconfig wlan0 heres what I get:
home/j-dub # iwconfig eth0
wlan0 unassociated ESSID off/any Nickname:"ipw2100"
Mode:Managed Channel=0 Access Point: Not-Associated
[code]....
Notice it says that the 'Radio is disabled by switch' in dmesg. I can press that switch until the end of the world comes and it does absolutely nothing but make the WLAN light put on a light show. And it shows the wlan to be unassociated with any clients. So, what are my options to get this Wireless up and working?
Computer/OS info:
Fujitsu-Siemens Amilo M7400
1.4GHz Intel Centrino R
40GB HD
Suse 11.1 KDE
I use an internet connection with a proxy. I have set the proxy in Firefox and systemsettings so now I can browse the web and I can ping Google from Console. But when I start Software Management, it says "Cannot access installation media". Whats wrong?
View 3 Replies View RelatedI have been a long time Windows user and just recently switched to Ubuntu. At first it looked like everything was going great ... now I just seem to have lots of problems with stuff not working right or not working at all, there are lots of issues but first tings first. I can't seem to get any program to copy or burn any dvds or cds. I understand that you need certain codecs and css stuff which are already installed.
View 5 Replies View RelatedI have an asus 1215b laptop. For some reason, when I plug my mouse into any of the USB 2.0 ports it doesnt work. However, these same ports work perfectly to coppy files onto pendrives or external hdd. However, the USB 3.0 works perfectly for everything. The last thing I expected was the newer 3.0 to work and not the older 2.0. btw, my mouse is a generic, brandless laser mouse (it is an inhouse brand of PC CITY stores: PC LINE). I have never had any problems with it before.
View 1 Replies View RelatedI recently moved into my room-mates house and her wireless was not secure as I was able to log on to it unsecured with my Fedora 12 Laptop. After Securing it with WPA all the windows computers had no problem getting back on to the now secure wireless. Using GNOME I went to SYSTEM then PREFERENCES and NETWORK CONNECTIONS and clicked on the wireless tab and configured wireless security tab and configured for WPA WPA2 Personal. No problems. But when I go to the gnome tool bar and click on the network and see our SSID it wants to use WEP 40bit and others methods but has no selection for WPA.
View 10 Replies View Related