I am installing Ubuntu 9.10 on my computer and I get the following error:
"the ext4 file system creation partition #2 of Serial ATA RAID nvidia_bjfefgci () failed"
I followed the following instructions to prepare partitions [URL] and allocated 10,000 MB for swap, 245,000 MB for the one with / mount point and 245,000 MB for the one with /home mount point. I have two 250GB HDDs.
I installed fedora 13 64 bit and it works great but I encountered several issues when setting up guest OS with KVM. The problem seems to be related to selinux. But let me first ask question about logical volume. By Default fedora created logical volumes:
[Code].....
"If you expect that you or other users will store data on the system, create a separate partition for the /home directory within a volume group. With a separate /home partition, you may upgrade or reinstall Fedora without erasing user data files." seems to suggest I have to create a separate physical partition and assign that to /home. But reading elsewhere it seems to suggest logical volume acts like a partition. My goal is to make it easy in case fedora is hosed and I have to re-install it without affecting /home where my cirtical data resides. Given above do I need to create a separate physical partition or I am just fine?
I have a second hard disk that originally had windows and all my data. Windows is hosed but I can see my data from within Fedora and Windows is gone and I created created new partition in its place which used ot be the C:/ drive appears as 53 Gb filesystem. My data which was originally D drive appears as 215 GB filesystem. As given in [URL] I want to create a new logical volume in 53 Gb filesystem which I want to use as space for virtual disk to install guest OS's in KVM. Currrently 53 GB filesystem is mounted as /media/3467BH89JK789 but this does not work well with KVM. how do I create this logical volume out of 53 Gb filesystem partition and add proper selinux info and do I add to vg_vostrolx volume group and in a different volume group?
I'm running Ubuntu 9.10 on a dell desktop from idk when, its fairly old but regardless it was all running fine until about a week ago I got the infamous:
Mount of filesystem failed. A maintenance shell will now be started. Control-D will terminate this shell and start a new one. admin@ or whatever it is you get the point.
I've been trying all the possible solutions I could find and nothing seems to work. I just want to be able to use this computer. I don't care if I lose files, or have to re-install Ubuntu or any of that, if I can just get the thing running again. I've tried re-installing, and booting from the disc etc. none of which have worked. Basically, I just want to erase Ubuntu and re-install it.
I have a dual booting newly installed 64 bit Ubuntu 9.10 on my machine. It was all fine until today. Now when I boot into Ubuntu, I see the error Failed to mount root filesystem. I cant remember any significant changes during the last session. One thing I remember is I upgraded the system using the update manager which asked me to choose an option for grub boot loader. I opted for its upgradation. After the upgrade, I was able to work with Ubuntu for a few more sessions. Windows XP works very fine.I checked other threads which suggested running fsck, but it did not help. fsck does not report any errors.
View 1 Replies View RelatedMount of file system failed.this is the message i get wen try to boot into ubuntu 9.10 i dont knw how to rectify it
View 2 Replies View RelatedI have a 64 bit Karmic system with two drives. One is mounted as / and the other is mounted as /home. I just put the video card from my system into my son's system and got a new video card. (Don't see how it's related but still...)Now I am getting the following message when I turn on the system. code...
View 1 Replies View RelatedWhen using the gparted option to create a new partition table does this automatically create a new mbr?
View 1 Replies View RelatedI was using 9.04 for a while because it was working for me, I decided to upgrade yesterday using the Upgrade button on synaptic to 9.10. Now when I boot I get an error message:
Code:
chroot: cannot execute /etc/apparmor/initramfs: No such file or directory
Mount of filesystem failed.
A maintenance shell will now be started.
CONTROL-D will terminate this shell and re-try
I want to try to fix the problem so I do not have to do fresh installation.
My Ubuntu Linux system was switched off at the mains without being properly shut down. When it was restarted again, the file system checks failed and I was presented with the maintenance console command prompt. How do I check what is wrong with the file system. Is there any sort of generic repair command that checks the disk and fixes errors?
View 1 Replies View RelatedI have got arch Linux dual booting with Win XP on my laptop. I have been getting a filesystem check error since yesterday and am unable to start Arch. Upon googling and searching the arch fora, I came upon some advice which I tried which has not worked yet. Hence the new post.Basically, I was attempting to print something off and accidentally chose a printer that was not connected to my laptop. After half a minute or so, it repeatedly started giving me notifications that the printer was not connected...in excess of 200 messages that the printer was not working which continued to pop up despite me canceling the print job. The whole system got really sluggish (for the first time in the last year) and I had to restart the laptop upon which the boot messages appear. It gets to the point where its loading the various filesystems. It mounts root and says it fine.
I tried fsck which tells me that home and boot are still mounted.So I booted up using an Ubuntu Live CD and checked and repaired each file system which it successfully did. Upon rebooting into Arch, I am getting the same message.I have not installed anything new and had upgraded the whole system a few days before the problem started.
After upgrading and restarting my laptop, The purple splash screen hangs, and the terminal gives this message.
Code:
Also the boot menu does not show (I cannot open the recovery mode)
I've just got a new laptop with 4GB RAM available, in order to fully utilize the available memory I'm going to install Ubuntu Lucid Lynx 64bit, but when I boot with Live CD, I always get the following errors:
Code:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: Input/output error
Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs
Crashed System left at root @ maintenance shell. Below is the sequence after boot, with Exact Errors. How to Salvage important files from my crashed laptop hardware.
A) Via a Transfer to a USB stick in Terminal, would be ok
B) Via SSH through the router from the good laptop that is Preferably using Nautilus / GUI, Terminal also ok (less confident of my skill here)
C) Directly Fixing Laptop and being ably to use Nautilus / GUI to Copy Files to USB stick, localy
The result of some effort:
A) the USB stick is good but Can't get in to it from the crashed laptop
B) SSH: No luck I get: "Cannot display location "sftp://192.168.1.101/"" from the good Machine
C) at a lose here...
The Crashed Laptop is:
Ubuntu: 9.10
Linux: 2.6.31-22-generic
Gnome: 2.28.1
CPU: Intel Atom N280 @ 2GHz
NO: CD / DVD Drive
(USB Boot maybe possible? Have not made a Bootable Ubuntu USB Yet)
BOOT:
GNU GRUB Version 1.97~
Ubuntu, Linux 2.6.31-22-generic
etc / (& recovery mode)
Mini Ubuntu logo or splash screen
File-system checks are in progress sticks every time at 4%
init: mountall main process (418) terminated with status 3
#(it seem to count up every time I re try to boot ? (init: mountall main process (423)(429)(etc)
Mount of filesystem Failed.
A maintenance shell will now be started.
CONTROL-D will terminate this shell and re-try
root@Bi-Ji-Ben:~#
I can navigate around but cant get the GUI up
root@Bi-Ji-Ben:~# nautilus
could not Parse arguments: Cannot open display:
A good USB stick reads & writes in another laptop running Ubuntu 9.10. When I connect the USB to the Crashed Machine it starts with:
"assuming drive cashe: write through", and hangs on this tell I press: "Ctrl+C"
In the crashed machine I can't seem to get into the USB anywhere that I think it should show up and trying to "mkdri" got me:
"Read only file system".
I want to change my sda2 partition to ntfs type. i have installed GParted but it is returning a strange type of error. Here is the error dump file...
[Code]...
WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot. WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot.
I currently have a server setup in a perfect way for my specific network. Is there a way that I can mirror the server EXACTLY to a CD that will install all my configurations and the like upon CD boot?
View 5 Replies View RelatedAnd now i have lost more than 1.9 TB of data.
Ok, i know. there should have been a backup. I came that far... but not beyond. I have bought a STORA MS2000 and 2 x 2TB WD EARS Harddisk. Except a couple of troubles that i had to go through with it - it finally worked. It did for 3 months. I have moved the NAS from one room to another and when i reattached it ... i all of a sudden didnt work anymore.
Tick, tick ... tick ... just like it would have a head-crash. I attached the disks to my iMac just to know what they sound there. Of course the iMac couldnt reat the disks. The disk-utility just let me know that the file-system is XFS (so far i knew) .. and then they are striped. So i knew i wouldnt be able to retrieve my data there ..
My question now. Since i dont think that my harddisks have a serious damage - how in on Gods Earth could i save my data from an XFS striped volume that was taken out of a STORA MS 2000?
I hope i wont loose all my data now ... but dont know if i would have any success to setup a Linux-PC and then have to look for the right software or even buy a card or so ...
This is my partition table:
/dev/sda1 1 4255 34178256 83 Linux
/dev/sda2 4256 4437 1461915 5 Extended
/dev/sda3 * 4438 9964 44395627+ 7 HPFS/NTFS
[code]....
A friend of mine upgraded his pc to ubuntu 10.04. Sadly enough we ran into issues with his graphics card, which apparently doesnt work well with lucid. We decided to downgrade to 9.10. I did this by installing over the old partition and chose to import the settings from the old account.The problems started when the pc booted for the first time:The list of kernels in grub2 was the one from 10.04.Somehow grub2 from the old installation seems to be still around and messes everything up. Any ideas how I could fix this?
View 6 Replies View RelatedI upgraded 9.10 to 10.04 via the web. The program announced it would take several hours, and when I came back to check, computer was off (kids?). Anyway, machine boots and 10.04 starts, but then blinks a few times and goes to a prompt. What should I tell it?
I have a 10.04 disc too, but it won't run from that either (Cannot mount dev/loop0 on filesystem.squashfs failed). Same message when I tried to start a nearby Windows machine with it. Disc "verified" when I made it. What's with that?
I decided to try to do the 3 distro upgrade stretch from 8.04 to 10.04 this weekend and now I am hung on 9.04 to 9.10.. The upgrade went swimmingly, but I hit a wall upon boot. When I try to load kernel 2.6.31-22 I am greeted with the following error:
Code:
[ 20.879845] ACPI: I/O resource vt596_smbus [0x400-0$407] conflicts with ACPI region SMOV [0x400-0x406]
Mount of root filesystem failed.
A maintenance shell will now be started ... After doing some digging I found this thread which appears to be similar in the inability to mount the filesystem. However, it does not mention the ACPI error. I tried everything in that thread; verifying device ID's, editing fstab options; running a filesystem check, and flipping the UTC option in the rcS file but nothing worked. The OP of that thread eventually did a fresh install of Karmic; but I would rather not have to go that far.
This is a Natty system. I ran update manager to update to the latest releases for Natty, and it crashed. I ran it again and it told me it could only do a partial upgrade, and that I should do apt-get install -f. I did that, but apt-get told me the system was locked by another program. Not to worry I thought, I'll just reboot. So I did that, and I think Update-Manager got a lot further through the process than I thought, because my system is borked. It'll boot into Gnome, but when booting up the Boot Screen no longer shows the pretty Ubuntu Logo, but rather a line of text that says "Ubuntu 11.04".
When it gets into Gnome the keyboard and mouse more or less don't work (although the keyboard based Fn+9 and Fn+10 brightness control still works) and there is no desktop background. After about 30 seconds something crashes but I can't click on it to find out what. Going into the recovery console doesn't help either. The latest Kernel (2.6.38-7) stops moving forwards after "Begin:Running /scripts/init-bottom...done". has occurred for the second time. Luckily I still have the previous kernel, which gets to the same spot and then tells me:
"init: udevtrigger main process (390) terminated with status 1" and then "init: udevtrigger post-stop process (394) terminated with status 1".
I then get the message
"The disc drive for / is not ready yet or not present. Continue to wait; or Press S to skip mounting or M for manual recovery". S goes back to "Begin:Running /scripts/init-bottom...done" a second time, M brings up the message:
"Root filesystem check failed. A maintenance shell will now be started"
and then it asks for the root password and gives me a terminal. Everything seems to be there, but apt-get and dpkg both can't do anything as the filesystem is read only.
I am trying to install windows 7 on my harddive, I am running ubuntu 10.04 and have windows 7 on DVD.I was until recently also using uberstudent, which I deleted (100 gigs) to make space for windows.However once I get to the windows start up I get a message: setup cannot detect or create a partition for this partition. (not word for word).
View 1 Replies View RelatedI'm running a modified version of OpenSUSE 11.1 from the susestudio builder. I've run across a weird issue whereby gparted is unable to create anything more than an hfs filesystem.
It seems that the package libparted simply doesn't exist in any of the repositories I'm using. I am figuring this would affect what gparted is able to do, although I'm unsure since the program itself runs fine.
I have attached an external USB disk to my debian gnu/linux system. The disk showed up as device /dev/sdc, and I prepared it like this:created a single partition withfdisk /dev/sdc (and some more commands in the interactive session that follows)formatted the partition withmkfs.msdos /dev/sdc1If I then attach the USB disk to a Windows XP or Vista system, then no new drive becomes available. The disk and its partition show up fine in the disk managment tool under "computer management", but apparently the file system in the partition is not recognized.How do I create a FAT32 file system which can actually be used in windows?edit:I've given up on this and went with a NTFS file system created by windows. In debian lenny this can be mounted read-write but apparently it requires you to install the "ntfs-3g" package and explicitly pass the -t ntfs-3g option to the mount command.
View 2 Replies View RelatedIs there a way that I can use my Linux ext4 file system, as such and then use it on some other computer.I have a dual-boot of Windows 7 and Ubuntu 10.04 and my partition table looks like this:My question might not be clear, so explaining it with an example.Can I copy my Linux partition on a flash drive and then use it on a different PC, with or without any need to install Ubuntu on new PC, by simply booting from the copied ext4 partition.This way, I can easily port my Ubuntu packages and other applications, settings etc. from one PC to other
View 1 Replies View RelatedRunning F12 on my compaq evo N410c. Did a system restart 4rm gnome logged in as root & now grub cant mount my root filesystem, it boots vista though. How do i rectify dis.
View 2 Replies View Relatedi want to use linux but i am having some issues getting it to work on my system. my desktop is a p4 3.4gig with 512 DDR. When I insert my ubuntu CD it starts loading but then i get this screen/message:
Busybox v1.15.3(ubuntu 1:1.15.3-1ubuntu5) built-in shell(ash) Enter 'help' for list of built in commands (initramfs) mount:mounting/dev/loop0 on// filesystem.squashfs failed input/output error Can not mount /dev/loop0 (/cdrom/casper/filesystem/squashfs) on //filesystem.squashfs if I put the same disc into my HP laptop it boots up ubuntu fine. (however it won't allow me to get online, but that is a different issue).
I am trying to create a driver for a particular filesystem format(FATX) because one does not exist natively for linux. So my question is this. I know the format the file system is in, but how do i make a driver for it? I mean, i want people to be able to do, for example
'sudo apt-get install fatx' And then it downloads the driver, and bam, they can read the fatx file system?
I debootstrapped lenny to by machine. I compiled the latest kernel etc and setup all the necessary programs by chrooting. I want to now boot a PC using newly debootstrapped system. How do I do it?
View 1 Replies View RelatedMy Fedora 12 System was failed when booting.The message like that : mount: wrong fs type, bad option, bad superblock on /dev/mapper/my_vol missing codepage or helper program, or other error. In some case, useful info is found in syslog - try dmesg | tail or so Can't mount at root filesystem. [drm: drm_mode_rmfb ] *ERROR* tried to remove a fb that we didn't own. Boot has failed, sleep forever. I guess something wrong with my hard disk, so the bootloader can't recognize the filesystem type.
View 2 Replies View Related