General :: How To Expand A Partition Size?
Jul 20, 2010How to expand a partition size for which it was fixed.
View 2 RepliesHow to expand a partition size for which it was fixed.
View 2 RepliesWhen partitioning disk devices for F14 on my new x86-64 box, I allocated 100G for / mounted on /dev/sda1. It's now 100% full. I have 365G free space available on the disk. Can I somehow extend /dev/sda1 to use some of this free space?
View 7 Replies View RelatedI have been using ubuntu for about a year now. Since then one main thing have evaded me: how to increase the size of /home without reinstalling the OS. I tried to change the size from the default 200mb once while installing and it ended up messing up my hard drive, so I decided not to do it this time around because I have important stuffs on it.
View 9 Replies View RelatedMobo - Asus M4A78T-E
CPU - Phenom II X4 955
RAM - DDR3 1333 dualchannel 8G
Display - Samsung 2494
Debian 504 64bit
Where can I download respective drivers. Linux drivers coming with the mobo can't work. There is no driver for Linux on the CD coming with the display. Fonts becomes very large even selecting "8". The screen can't expand to the full size of the display.
I need to expand my ntfs and have ample GB, all taken up presently so if I create some unallocated GB's under ntfs how do I expand the ntfs partition. I have gparted live CD.
View 1 Replies View Relatedi installed ubuntu 10.04 with wubi on Windows 7. It works perfectly. And, i've only installed 5GB rather that 20GB in my partition (from the wubi option at the first time). I made this partition only for ubuntu but silly me i've installed only 5GB rather than to chose 20GB Now the ubuntu is low on disk space! it' only 120MB left from 5GB. My question is, is there any way expand it to 20GB so the partition is fully for home folder, etc? I want my 15GB!
View 6 Replies View RelatedI clean installed Ubuntu 10.10 by shrinking my Windows 7 partition slightly. Now that I want to expand my Linux partition, I shrunk my Win 7 partition from Windows OS. From Ubuntu, the partition manager shows /dev/sda1 contains the Win 7 and unallocated partition. /dev/sda2 contains the Linux and swap partitions. I can't seem to expand my Linux partition (ext4) in sda2 with the unallocated space in sda1. I also can't shift the unallocated space in sda1 to sda2. Any idea how to expand my main Linux partition with the unallocated space?
View 4 Replies View RelatedI have Ubuntu 10.10 installed along side of Windows 7 on the same partition. I'm a bit of a noob as I have only recently got serious about using Ubuntu daily. I was wondering how I could go about expanding the space Ubuntu can use seeing as how I don't have it set up as a separate partition.
View 5 Replies View RelatedI am not sure where to post this so move please if its the wrong place. A few weeks ago i decided to try out Ubuntu, so I installed it as a dual boot, along with Windows 7. Now i have decided to switch fully to Ubuntu, so I have formatted the windows partition. Now however i am not sure how to allocated the unallocated space and expand the Ubuntu partition. Is even possible?
View 4 Replies View Relatedi have got an old computer with some partition and one have linux slackware installed; it is all included there (root and a swap file); its size is almost 4 gb. Now i have a new laptop and i do not really want to reinstall linux on it; simply i want to transfer all things from old on new computer. The size of new hd is almost 12 Gb and i want to use entire with linux slackware. I will recompile new kernel on old computer for the new. Now, i think to use dd to make one image, this follow command may be good, i think:"dd if=/dev/hda3 of=./linux_slackaware.img bs=4096 conv=noerror"I use zipslack on msdos partition (hda2) to run this command; it will make a 4 gb file image partition;Now i ask you:it is possible to transfer and to adapt this image partition on a different size image partition?The new is 12 gb size.what are the right dd command parametres?
View 7 Replies View RelatedSo, I wan't completely paying attention to the default partitioning that Red Hat Enterprise 6 does.
I was setting up a base image for VMWare and the disk was 200GB, but for some reason the default is for about 40% to go to the root partition and then the rest of it to go to /home (this doesn't include the 2GB or so in swap).
Is there an easy way to recover the space under /home and expand the root partition? Assume there are no user accounts created.
a client brought in an 160GB external HDD and wanted to get the files off it, there appeared to be no partitions on the disk but i thought it may have been formatted to use the whole disk. I tried to mount it as the various FS types the client thought it may have been to no avail.
I ran testdisk on it which told me that it previously had a mac partition table and a 210GB partition on it (which is larger than the disk) could anyone enlighten me as to whether or not this is even possible, and if so how could i retrieve the data?
i want to know about the partition size of linux in my system..i have pentium 4 with 512 mb ram and 15 gb hard disk for opensuse 11.1..i want to know how much space should be allocated for /,/home ,swap etc and under what kind of partition they should be formatted (like primary,logical,extended etc)...kindly help me in this regards...I have windows xp and want to install opensuse with it.
View 2 Replies View Relatedecently I tried to increase the size of my swap partition using GParted, but it wouldn't let me. I wondering if there was another way? Currently it's 795 MB but I want it to be 1GB
View 3 Replies View RelatedI decided to clone my OS partition to another hard drive using dd (without any special options). I created the target partition before cloning (25GB) but it shows up as 21GB (source/original partition's size) in df, as well as ext2 instead of ext4.
View 2 Replies View RelatedI removed an ntfs partition I had in my HD and then resized my home partition with gparted to occupy all the available space. The resulting partition is supposed to be 129GB, and gparted/partition magic see that size. But the system does not, and all tools report the old partition size and the same free space I had before resizing.
View 5 Replies View Relatedwhenever I try to download anything I get the error there's not enough space on my home partition; thus I was wondering if anyone would be able to tell me how to increase its size? I'm using ubuntu via vmware workstation.Here is the output of df:
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs 254964 0 254964 0% /lib/init/rw
varrun 254964 52 254912 1% /var/run
[code]...
I have a 300 Gb Hard drive, I used to have windows xp on it but decided to install ubuntu, so what I did (after some suggestions) was to create 3 partitions, one of 30 Gb for windows (I use Adobe software), one of 10 Gb for Ubuntu 9.10 and the rest as a common partition used for storage. Started ok, but I really got hooked with ubuntu and now my partition is full!. My question is ( and here is where I show my deep ignorance and shame): can I "expand" the ubuntu partition gaining space from the storage one? If not, how many Gb would you recommend for an Ubuntu partition? I'm using a lot of music/video/graphics production software.
View 9 Replies View RelatedI would like to expand my root partition to the left. I already moved my 100MB /boot partition overand that took like 12 hours with Gparted, so no way do I want to use it for my 60GB partition to gain another 2GB. Is there a faster way? (Besides wiping the partition, creating the new larger one and reinstalling Ubuntu? )
I've heard LVM might be good, but it sounds like I have to do that from scratch as well, and I'd rather not lose all my stuff and start over, I just want to clean up my messy partitioning.
These following ext3 partitions contain identical data. As we can see, the larger the partition size, the more space is required for the same files:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/loop11 3965777 561064 3199964 15% [...]
/dev/loop19 573029 543843 29186 95% [...]
[code]....
I have Ubuntu server 8.04. I have 4 hard drives of 149Go each. Size of a mounted partition is smaller thant the partition itself :
- first drive is the system
- I mounted the 2nd drive (ext3) on a folder, but the Size is 941.89 MB instead of 149Go
- same for drive 3 monted on another folder, but the Size is 941.89 MB instead of 149Go
I've got a server that needs more space. To achieve this we added space (by extending the VMware disk attached to it).Normally this isn't an issue, because we just add an new partition and LVM it from there, but this host predates our deployment of LVM everywhere.
Our current theory is that the unallocated sectors can not be assigned because they aren't part of the extended partition, and thus ... we go in a circle.So what i believe the way forward is to extend sda4 so that i can then create an sda10 inside of it. Anyone have any ideas on how to do this? I was thinking gparted may do the trick ... but being a server i'm in runlevel3, with no X...
I am relatively new to Linux and Opensuse. I created the / root partition and now it is growing and maxing out. I have partitioner available to me but how do I change the partition size when the root partition is mounted. Do I login as root and then umount or modify fstab and restart and change from command line or do I format and reinstall everything? I have room to expand but not sure how to manage this?
View 4 Replies View RelatedI just looked at the "posting permissions" and unfortunately I'm unable to insert the screen copy of the kde manager's representation of the goal I want to hit.I got a dual boot system with 4 hard disks and grub installed on /dev/sdd1. Windows xp sp2 (only used for professional audio tools, don't whip me ^^) is installed on /dev/sdc1. The disk sdc is partitioned with the following settings:
Code:
/dev/sdc1 * 1 498 4000153+ b W95 FAT32
/dev/sdc2 499 18922 147990780 f W95 Ext'd (LBA)
/dev/sdc5 499 1494 8000338+ b W95 FAT32
/dev/sdc6 1495 18922 139990378+ 7 HPFS/NTFS
When I partitioned the disk I was believing 4 Go were sufficient for windows xp but after years I realized that many applications were using the C: by default (no way to change it thru regedit or another workaround, hard-coding probably) installing stuffs and under windows this is impossible to use such blessed things like the unix's symbolic links !So right now I'm a little tight with the remaining space to work with windows xp. (Of course the swap file has been moved to another partition since the first day I installed xp...)
I have is to use the 7Go of unused space on this disk to size up the /dev/sdc1 partition. When using kde partition manager I noticed that there is no way to use the unused disk space to size up /dev/sdc1 directly.Do you think if I create a partition with the 7 Go of unused space that there is a way to size up /dev/sdc1 without messing up the bootloader ? I don't think GRUB matters about the new partition, it should get the /dev/sdc7 entry. For the backup there is no problem this partition is completely backed up every two weeks (as an image) so the datas may not be lost as a real catastrophic... but if there is danger for the other partitions... that's will be more annoying... but solvable ^^
Once partitioned I believe that there will be a way to "merge" the /dev/sdc1 and /dev/sdc7 partitions and then I would enjoy a new xp partition with 7Gb of free space (it would change from my actual 300Mb !!).Technically it would be possible this is just a question of chaining the different blocks each others and refer to the new space added.The last block in /dev/sdc1 would point to the first block that starts /dev/sdc7 and "that's all"... and /dev/sdc7 would disappear as a partition.
When I do the who command it doesn't show all my info.
View 7 Replies View RelatedHow to safely expand swap?
View 1 Replies View RelatedI have 3 Ubuntu installations & a PCLINUXOS, plus Windows XP installed on one hard disk. I still can boot to each one of them and can mount each one using Ubuntu.
The problem "may" have occurred when I reduced the size of some linux partitions using gparted. I still have plenty of space in each of those partitions.
When I started gparted all of the HD was unallocated. I did that from each ubuntu installation and the PCLINUX installation, plus LIVECDs. All indicated the space was unallocated.
When I did an fdisk -l from a Puppy Linux LiveCD I got a normal start and ends of each partition.
When I tried it from Ubuntu installation or live cd, I received the following types of responses:
Code:
ubuntu@ubuntu:~$ sudo fdisk -l /dev/sda5
Disk /dev/sda5: 28.5 GB, 28566397440 bytes
255 heads, 63 sectors/track, 3473 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
ubuntu@ubuntu:~$ sudo fdisk -u /dev/sda5
The number of cylinders for this disk is set to 3473.There is nothing wrong with that, but this is larger than 1024,and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Plus the Windows partition seems to go over its limits.
Since all of my OS installations are still working, I don't know how critical this is. From reading another post, I understand this might be able to be fixed by making some changes in fstab.
I installed Ubuntu Maverick as a file within Windows XP. A folder was created called Ubuntu and two files called wubildr and wubildr.mbr appeared on my C-Drive. The Windows boot.ini file looks like this code...
The initial 8 GB I gave to Ubuntu is too small and I would like to move the file to my D-Drive and expand it to 40 GB.
I would hate to have to begin again from scratch. Is this possible? If so, how?
I need install a debian server that will function as a domain controller, file server, webserver (PHP + MySQL) for an internal application. The number of users are 5 but I'm predicting an increase of more than five. I mirror 2 disks 160GB and want to create separate logical partitions for / usr, / opt, / var, / tmp and logically the primary /, / boot and SWAP. What is the best size for each partition? Time: ASUS P5VD2-VM Proc 1.6GHz 4GB RAM 2x SATA 160 GB.
View 1 Replies View RelatedI want to make a new partion,my home is /dev/hda9,so I use the Partion Editor(Gparted) ,frist umount the device(umount -l /dev/hda9),then change the size,everyone thing works well until I clicked the Apply,the error occurred:
View 1 Replies View Related