Ubuntu :: Grub2 In 10.4 Installation Stopped Now No Bootloader
Apr 30, 2010I tried to install 10.4 but it comes to the stage which installing grub2 and stop now I don't have a boot loader?
View 2 Replies
ADVERTISEMENT
Ubuntu Installation :: Windows Does Not Show Up On Grub2 Bootloader
Jul 19, 2010I'm relatively new to Ubuntu, I've installed it in Virtual Box and through Wubi on other computers but this was the first time that I've done a live install on my production computer. I had problems from the get go, I was using a Live CD of 10.04 (64 bit AMD) to install it and when it got to the part about choosing a partition no drives would show up at all. Eventually after some searching around, I discovered that Using an Alternate install CD would work. I did that, installing Ubuntu into one of the free partitions I had set up prior to this. Eventually my system turned on but the monitor went to sleep so I had to hit E on the grubmenu and change something to nomodeset (or something like that) so that I could see the screen. I installed Compiz and it was all good from there.
Except for One issue, I cannot boot Into windows at all, it doesn't show up on the bootloader even though the partition shows up in Gparted. I've tried updating Grub2 with no results, here are the results of Sudo fdisk -l
Disk /dev/sda: 400.1 GB, 400088457216 bytes
255 heads, 63 sectors/track, 48641 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x1549f232 .....
Ubuntu Installation :: GRUB2 Bootloader Crashes With Win7 And 10.04 Dual Boot?
May 7, 2010I have a Dell Studio 14 laptop with Windows 7 64bit preinstalled. The processor is core i5 and the machine has 4GB RAM. I freed 25GB of memory from my Hard disk and tried to install Ubuntu 10.04 (AMD). Everything went fine. I restarted and Logged into Ubuntu. It worked like a charm. Then I restarted to Windows7. This also worked well as expected.
But, when I rebooted again, I got a black screen saying that �No modules found. Press any key to restart�
When I press a key, it says �No operating system found�, probably after checking through a network (it printed lines starting with PXE).
I tried exactly in the same way with Ubuntu 8.04 in my machine, and this worked without any problem. The Bootloader was not corrupted after restarting from Windows. I noticed the problem with Ubuntu 9.10 and 10.04. I feel like a problem regarding the bootloader version. AFAIK, 9.10 and 10.04 is using GRUB2 when 8.04 use the old version of GRUB. Will I have to switch to the legacy GRUB? (I would love to keep using GRUB2). If yes, I would like to know How.
Fedora Installation :: Grub2 Bootloader - Manually Adding Entry?
May 29, 2010I have a working Ubuntu install with the Grub2 bootloader. I need to manually add an entry to boot Fedora 13 off of sda. Sda1 is the boot partition, sda2 is LVM. None of the examples I've tried work. I do also have F13 grub installed on sda, but chainloading to it didn't do anything other than a blinking cursor.
View 5 Replies View RelatedUbuntu :: Use Chameleon Bootloader Instead Of GRUB2?
Jun 3, 2010Awhile back, I made my desktop a hackintosh. The only way to boot it was Chameleon, which I was totally fine with because it looked nice. Currently, I removed OS X, and now only have Windows 7 and Ubuntu (10.04) installed. My gripe is that GRUB2 looks butt-ugly... it's still the basic white-text on black-background, without any graphics or anything. Is it possible to remove GRUB2 and replace it with Chameleon? Or maybe can Ubuntu start using Chameleon as the bootloader in future releases?
View 6 Replies View RelatedUbuntu :: Installing Without GRUB2 / Possible To Use The Original GRUB Bootloader?
Aug 31, 2010I've had nothing but trouble with GRUB2. Is it possible to use the original GRUB bootloader?
View 3 Replies View RelatedUbuntu :: Change The Font Color Of The Text Of The Bootloader In Grub2?
Feb 14, 2010I'm trying to change the font color of the text of the bootloader in Grub2. I'm running 9.10. I successfully edited the Grub cfg file change the colors of the Grub menu, but I'd like to change the text color as I watch the modules load and can't seem to do it. I'd also like to password protect the bootloader if possible. I installed startupmanager but the new version won't allow these changes. I like to see my modules as they load and wanted to change the color from white to blue.
View 2 Replies View RelatedSoftware :: Adding Files Extracted From An ISO To GRUB2 Bootloader?
Feb 16, 2010I have extracted the files from a bootable CD to /dev/sdc2/bootable/winpwrec with the hope of booting from the hard drive. I have read the grub.cfg file and a couple of guides here and I'm still not sure what I'm doing. Is there any chance someone can tell me what I need to add to the grub.cfg file to add this to the boot menu? I am pretty well-versed in computers but I'm new to Linux and I'm still trying to get acquainted with the OS, terminology, and the boot loader. I'm using Ubuntu 9.10, if that matters.
files in the folder:
BOOT.CAT;1 ISOLINUX.BIN;1 SCSI.CGZ;1
BOOT.MSG;1 ISOLINUX.CFG;1 SYSLINUX.CFG;1 VMLINUZ.;1
INITRD.CGZ;1 README.TXT;1 SYSLINUX.EXE;1
isolinux.cfg
Code:
#serial 0 19200
Ubuntu :: Grub2 Stopped Booting Windows - Can't Get It Fixed?
May 20, 2010I'm dual-booting Ubuntu 10.4 (grub2) and Windows 7 (x64). Something stomped on my grub install on the windows boot sector (probably windows). I was getting errors like "Cannot find disk.." I updated my grub.cfg to what I thought should work and now I'm getting errors like "cannot find C/H/S values".
I've attached the RESULTS.txt. Its really a simple install, although I do have a RAID5 array; the RAID disks are just for data and hold no OS files. Both OS's are on /dev/sdd.
Ubuntu :: GRUB2 Overwritten - Boot Into Windows Via TC Bootloader But "no Bootable Partition Found"?
Sep 11, 2010I'm using Truecrypt to encrypt my Windows 7 OS. I also have unencrypted Ubuntu 10.04 installed on /dev/sda6 on the same hard drive. Since Truecrypt bootloader must be installed in MBR, I have GRUB2 installed on /dev/sda6, so I can use TC bootloader to load GRUB2. When I first install GRUB2 on /dev/sda6, I can use TC bootloader to load Ubuntu. But, if I boot into Windows via TC bootloader, and then later try to boot into Ubuntu, I get the message "no bootable partition found". I have to reinstall GRUB2 onto /dev/sda6, every time after I use windows in order to be able to boot into Ubuntu. It seems that starting Windows somehow overwrites GRUB2. Is there a fix for this?
View 1 Replies View RelatedUbuntu Installation :: Grub2 Can't Load Window 7 After Recovered Grub2 Using Live Cd To Boot Windows 7
Mar 7, 2010i initilally installed ubuntu 9.10 then installed windows 7 ,then i recovered grub2 using livecd as told in the post [URL] i did "sudo update-grub" and got windows 7 menu entry but when i select that entry windows 7 does not load but the grub2 is reloaded again.
i cant boot to windows 7.
Windows 7 have 100 mb partition "System Reserved" the grub2 points to that partition but still windows 7 not loaded.
sudo fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x3c3a81f5
[Code]....
Ubuntu Installation :: Grub2 Dosn't Save Windows As Last Selected + Boot Into Cdrom From Grub2?
May 17, 2010I went through so many post but I haven't found the proper answer yet hope you have an Idea1. Grub2 saves only Linux OS as last selected no Windows OS2.It is possible to boot into a cdrom (drive)?
View 2 Replies View RelatedUbuntu Installation :: Grub Installation And Revert To Windows Bootloader?
Feb 22, 2010i've been using ubuntu with wubi, and I'd like to install it on my new hard drive (so windows is on one hdd and ubuntu is on another). afaik, grub will be installed on the hdd w/ ubuntu, and i have to set it to recognize the other (windows) hdd. assuming that i want to get rid of ubuntu and just use windows, what steps do I have to take to do so? (if grub is only on the ubuntu hdd, then would I just have to format it?)
View 2 Replies View RelatedUbuntu Installation :: Bootloader Fails After Reboot After Installation
Mar 29, 2011I installed Ubuntu 10.10 amd64 (and tried 10.04.2 as well) from Wubi under Windows 7 64-bit. When I reboot after installing it through Windows, I go to Ubuntu and the installation completes. Then it reboots again to finish the install of the OS. When I boot into Ubuntu now, grub does not appear. Instead, some initramfs stuff comes up in a console with no GUI and says some error stuff about root devices. I read that grub updates cause problems, but the installation never finished and therefore I was never able to go into Ubuntu to lock grub packages, etc. I've run into this error on multiple fresh installs.
View 1 Replies View RelatedDebian Installation :: Install Grub On Master Bootloader / If Installation Is Going On Separate Hard Drive?
Feb 5, 2010I am helping my pal to get into Debian (yes first timer).He is running W7 on a 500G SATA HDD and he has another 250G SATA HDD that he wants Debian to go to.Will Debian install grub on the master bootloader even if the installation is going on a separate hard drive?I have dual boot before but on the same hard drive.
View 6 Replies View RelatedUbuntu Installation :: Possible To Use Windows Bootloader?
Feb 11, 2010I was wondering if it's possible to use the windows bootlaoder instead of GRUB to choose between Windows and Linux? If so how?
View 5 Replies View RelatedUbuntu Installation :: How To Access The Bootloader
Feb 15, 2010I am just starting to learn how to work with a Linux OS and was planning on using a bootloader to start my PC so that I could choose which OS I wanted to start, enabling me to mess around with them without needing to worry about hosing my system.Also, my studies are taking me deep inside how the Linux OS system works in general and was hoping that I could also get some advice on where to start separating GNOME from the OS to find out exactly how they work together, how the OS works with services, etc. because I am trying to learn everything that this entails.
View 2 Replies View RelatedUbuntu Installation :: How To Use Win7 Bootloader
Mar 3, 2010I installed Windows 7 First then give partition space of 25 GB for my Ubuntu. However, I prefer using Windows 7 BootLoader instead of using Ubuntu BootLoader.
View 4 Replies View RelatedUbuntu Installation :: Getting The Lubuntu USB Without Bootloader?
Jun 24, 2010I recently installed Lubuntu to a USB. It was up and running and worked fine, however, upon exiting and going to boot into windows, I noticed it had installed a GRUB bootloader. I use whole disk encryption on windows, which has its own bootloader, so I can't be having some other bootloader on the PC interfering with this. I used my rescue disk to restore my WDE bootloader, but the USB stick will not boot now.
I also tried using pendrivelinux but this copies the live cd version onto the USB stick and nothing saves when you log off.installing Lubuntu to USB without a boot loader?
Ubuntu Installation :: Best Bootloader With 10.04 And Win7?
Oct 3, 2010What is the preferred bootloader with Ubuntu 10.04 and windows 7, when multiple booting also with Vista and XP all on one hard drive and each on separate partitions? All are installed except Ubuntu and now boot with the windows boot manager. I have heard that if you install grub 2 on the MBR, then boot windows 7, that it will replace the grub boot code with windows boot code automatically. So is it best to use that NeoSmart EasyBCD tool to add Ubuntu in to the windows boot manager, and can I install grub on the boot sector of Ubuntu's root partition ?
View 9 Replies View RelatedUbuntu Installation :: How To Change Bootloader
Oct 16, 2010I have two installs on the same drive but different partitions. First I installed XBMC live which is based on Ubuntu (I don't know the exact verion but I think it's in the 9.x).Then I installed full Ubuntu 10.04 on another partition. Now it uses grub2 off the second partition. I configured it to boot XBMC as default and I've had no issues with it. However in the end I rarely use Ubuntu since this is really HTPC. I thought maybe it would be cool to check emails and do some web browsing on my TV, but it turns out I prefer just using a regular computer for that. So I want to delete the partition, but I'm worried doing so will make the system not boot anymore unless if I reinstall XBMC live, I don't want to do that either since I've got it configured all properly and I don't want to mess that up. So I believe I have to change the MBR to point to the XBMC partition although I haven't quite figured out how to do that.
View 2 Replies View RelatedUbuntu Installation :: 10.10 - Where To Install Bootloader
Mar 26, 2011I am installing version 10.10. Does it matter where I install the bootloader? There are selections for the entire device and each partition. I have Windows 7 on /dev/sda1 and Ubuntu on /dev/sda3. The last time I tried this I couldn't go back to Windows 7 even after using the grub-update commands.
View 9 Replies View RelatedUbuntu Installation :: 11.04 No Bootloader Installed
Jun 4, 2011I tried to install Ubuntu 11.04 via .iso + USB key to my Asus EeePC 1000HE. This computer comes with two partitions already on the hard drive so I installed to the empty one, to dual-boot with Windows XP on the other. Installation seemed to work, but after resetting, the computer always boots straight to Windows, not Ubuntu or an OS list.From my Ubuntu boot USB, sudo fdisk -l shows that the installation wrote to the partition successfully.From Windows, the partition appears to have disappeared.So it seems that the installation worked except that I have no way to boot to Ubuntu.
View 3 Replies View RelatedUbuntu Installation :: No Bootloader After 15 Install?
Sep 1, 2011I have seen multiple others with this problem, I now have it too. I had Ubuntu 10.10 installed on my entire disk, then I installed Fedora 15 with it. The resizing-the-disk went smoothly, everything is great, but now when I turn on my machine, I get no grub, no boot loader, nothing. I just get thrown right into Fedora. I saw on a few other posts that if you manage to get into Ubuntu, you can open a terminal and type something along the lines of sudo grub update, and that would do the trick. The only issue is that I can't even get into ubuntu. I also was told that if you boot from a livecd you can edit the boot config, or view it, or something. I'm pretty new to all this "bootloader grub" jazz, and am hopelessly confused. How do I make it so that upon startup, I am able to choose between Ubuntu and Fedora?
View 9 Replies View RelatedUbuntu Installation :: Bootloader Popup And No Installation
Jan 9, 2010I've recently installed an Ubuntu Netbook Remix on my netbook and I'm trying the same on a desktop with a desktop distribution. I've a strange issue : I get to the start menu with the "Try ubuntu", "install ubuntu" and so on.
When I choose try I get a popup with title "Boot loader" containing the word "live". When I choose to install, I get the same popup with "live-install" as content. I don't find much on the web.
Fedora Installation :: Add Ubuntu's Grub To The Bootloader?
Aug 9, 2009I recently installed Fedora on a triple boot system with Winows XP and Ubuntu JJ. how to add Ubuntu's grub to the bootloader. Here is the output of Fdisk -l.
[root@localhost rabbit]# fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code]....
Ubuntu Installation :: Cannot Multiboot .04 From Windows XP Bootloader
Jun 1, 2010I am trying to install Ubuntu10.04 on my machine which already has on it, Win XP. Lemme lay down the setup of my machine first of all.
I got a new 320GB HDD of which I have taken 20GB as the primary partition and installed Win XP on it. Took another 220GB as an extended partition for my data storage. Around 63GB was remaining which I left it as unallocated. Decided to try Ubuntu, but preferred to boot it from the windows bootloader. Downloaded and burned the Ubuntu-10.04-desktop-amd64.iso(have a AMD x3 425 machine) and tried an install on 30GB of the 63 left.
I did not try any partition scheme. I chose the manual partition option, made a 28GB ext4 partition, made it primary, mounted the /, took another 2GB for the swap and proceeded. Chose advanced option and installed grub on the 28GB(/dev/sda6) and completed the installation.
Since no grub was installed, Ubuntu was not available. So then, used the bootpart utility to point grub to the windows bootloader, but it did not work, was giving me error when I chose Ubuntu from the bootmenu modified by the bootpart.
So tried booting with the same install cd, chose Live Ubuntu this time and mounted the 28GB, copied the first 512bytes using dd if=/dev/sda6 of=ubuntu bs=512 count=1 to a usb drive. Rebooted into windows and copied the file to C: and added it to the boot.ini. Rebooted and tried choosing Ubuntu from the boot menu but it does not work. I get a blank screen with the cursor blinking.
The machine is new and BIOS is LBA enabled by auto.
Ubuntu Installation :: Windows XP Took Over The Grub Bootloader?
Sep 4, 2010i had a dual boot xp/ubuntu first. later i had to format and reinstall xp. this deleted the grub bootloaderplease let me know, how to fix this! please make it simple . i have the live cd, but i don't have internet connectivity in ubuntu.
View 1 Replies View RelatedUbuntu Installation :: Without Touching Windows Bootloader?
Sep 23, 2010So here's the skinny, I have Windows 7 home Premium installed on my Touchsmart PC. I have a 60 GB partition I want to use for Ubuntu. Can I install Ubuntu to that partition so that it doesn't change how my computer boots up already?
Example:
I press the power button. The POST test processes and then boots into windows no questions asked, as if it's the only OS on the system.
I want to keep it that way even after Ubuntu is installed.
I want Ubuntu ONLY accessible by using the BIOS boot menu as soon as the PC starts up.
Ubuntu Installation :: Bootloader On External Drive?
Oct 1, 2010I recently installed Maverick RC to a partition on my external drive.Following the GUI, I used the advanced option and installed the bootloader to "sdb" and had Maverick install to a partition on the external drive (I want the GRUB to be on the external drive so I can boot directly into Win7 when I don't have the external connected). And, to note, I did set my BIOS to boot from the external drive first, I have that option in my BIOS. So, when I finished installing, I rebooted and all I got was a "-". Not even a "disk not bootable message". It just hung at "-" .
View 9 Replies View Related
