Ubuntu Installation :: Getting The Lubuntu USB Without Bootloader?
Jun 24, 2010
I recently installed Lubuntu to a USB. It was up and running and worked fine, however, upon exiting and going to boot into windows, I noticed it had installed a GRUB bootloader. I use whole disk encryption on windows, which has its own bootloader, so I can't be having some other bootloader on the PC interfering with this. I used my rescue disk to restore my WDE bootloader, but the USB stick will not boot now.
I also tried using pendrivelinux but this copies the live cd version onto the USB stick and nothing saves when you log off.installing Lubuntu to USB without a boot loader?
I have a LiveCD of the Lubuntu Lucid 10.04 Beta. First, I will say, I'm extremely impressed with Lubuntu. It's incredibly lightweight, pretty intuitive to use, and very pretty when compared to other distros of comparable weight (eg, MEPISLite, wattOS etc.) The only problem is that when I click "Install Lubuntu," NOTHING HAPPENS. Is it just because it's the Beta?
I want to try lubuntu on my comp which already has ubuntu and win7 dualboot. I intend to make a new partition for lubuntu 's '/' and let it share /boot with ubuntu.
I just installed lubuntu 10.10 onto my desktop and while on my first bootup I had the option to boot windows through grub, it's disappeared from the boot menu since then.When I installed I created a partition for lubuntu and installed onto that. I can still access and see my windows partition.
My Specs; Desktop PC, Tiger Direct, Firefly BCD. Mother board; PC Chips M758LT - ID 9039E90F31D926C3. Intel Celeron 1.3 GHz x86 Family 6 Model 11 Stepping 1. Bios; American Megatrends Inc., 062710, 7/15/1997 SMBIOS Ver. 2.3 Memory; 512 MB
Master HD 20MB half full with 40MB Slave HD. WinXP service pack 3 and all updates are current, with one glitch, system will not 'restart' have to press off button, then have to press off button twice again to start XP running again. Tried to run off CD using xubuntu, Lubuntu 11.04 and Unbuntu 11.04. A page of errors covers the screen, I have a photo attached which I hope you can download and zoom in on.
It starts out with, 570.240718 Kernal panic - not syncing: Attempted to kill init! 570.24786 Pid:1, comm:init not tainted 2.6.38-8-generic #42-Ubuntu.... Regards, Michael A I'm going to mark this as solved. I have to add a 40mb hard drive and make it master and make 20mb hd the slave and add 2 - 256 ram instead of 128 memory. I have an issue where xp will not reboot so i intend to format both hd's and try to install 10.04.2 from cd for a full install, no windows. I will report back.
Linux newb here. I was looking for a lightweight distro that I really like and Lubuntu was it. I installed in on all three of my comps with out issues and my old Dell desktop(512mb ram) is flying now. Way faster than XP even right after a fresh install of both on the same desktop. On my fourth install, my girlfriends old toshiba laptop, it installed fine. After the restart and reboot it gets to the Lubuntu logo with the 5 dots under it. It gets through 4 of the dots then freezes. I left it for 20 minutes and it was stuck.
I tried booting from cd again and check disc for defects. It said it found 2 files with errors, press any key to reboot. Which I did and it just booted right back into the freeze. Maybe since I have to manually make it boot from cd every time it was wanting to boot back into the CD after the disc check, I'm not sure. I tried burning a new iso on a slower speed, same thing for a total of 3 reinstalls with the same effect. The only thing different about this install compared to my others is:
A) I had to flash the bios from windows before I started to even get the damn thing to be able to boot from CD
B) I decided to just wipe XP and install Lubuntu on the whole drive.
I downloaded the Lubuntu 10.10 Live-CD ISO and burned it to a CD-RW disc. The Lubuntu Live-CD fails to boot on my secondary PC. It boots fine on my primary PC. The PC on which Lubuntu fails to boot is a Dell Dimension L (year 2000). Celeron 566 MHz. 192 MB RAM. That PC has Xubuntu 10.10 installed on HDD. Xubuntu runs fine. The PC on which Lubuntu boots OK is a Dell Dimension 4100 (year 2000). PIII 733 MHz. 512 MB RAM. The failing boot progresses to a point where I get a purple screen showing "Ubuntu 10.10". Underneath the "Ubuntu 10.10" is a progress bar consisting of four dots. The progress bar continually shows progress, but after a few minutes there is no HDD or CD activity. After about seven minutes I get a blank bluish-gray screen. After waiting an additional five minutes I pressed "Enter" and was returned to my original purple screen. The progress bar continued to show progress, but there was no HDD or CD activity.
I've tried installing Lubuntu 11.04 without any success, it just hangs on the blue splash screen. The md5 checksum matches and the integrity of the cd is fine.Can anyone suggest an alternative distro that can be run on an old comp with 192 MB memory.
Heard good things about Lubuntu 11.04 so I downloaded the .iso and burnt a CD to have a peek. When I boot up on the CD and choose "Try Lubuntu" the splash screen shows up then it jumps to command line. I tried startx, but it didn't work.
I am desperately looking for a how to : multiboot. Checked bodhi.zazen's thread, but its totally with reference to GRUB Legacy. I have karmic installed and also vista. wondering if there is a step-wise guide to multiboot with reference to Grub2. I want to add a SUSE, Fedora and Lubuntu, but have no clue as to how. I messed up my comp earlier trying to multiboot so now I just dual-boot Windows Vista and Karmic Koala.
I'm so excited to see how nicely Lubuntu 10.04 runs on my EeePC. I went ahead and installed it, knowing that it's just the second beta. Everything seems to be going nicely, but when I did a "sudo aptitude update && sudo aptitude safe-upgrade" it showed there were tons of updates (about 90MB worth). I saw updates for Chrome, the kernel, xserver-xorg, etc. I understand this is just a beta operating system and is not recommended to be used as a primary OS, but I'm just so excited and can't wait. If I stay with this install, and keep updating, would I eventually make my way to the final release? Or would you recommend doing a reinstall with the final image?
I have a Netgear USB wireless NIC and neither Ubuntu or Lubuntu Live images can see it. I have tried copying wlan from another machine and installing the packages, but that doesn't work.
I recently seen a thread showing what the file is that is missing in the Lucid live images that was present on the Karmic and earlier images, but I can't find it nor remember what the file was called.
I installed a new Ubuntu OS in my computer, (I downloaded it yesterday) on a dual boot pc (windows xp) Installation went smooth until it reached grub-pc. It was installing grub-pc (1.98 lubuntu6). It hanged there for several hours. Finally I interrupted the installation. When I went to the installed packages I got a message telling: Grub-PC 1.98 Lubuntu 6 Failed to Install or Upgrade. I'm pretty new to Linux so I know nothing about it, but I wish to go away from Windows XP.
I have a pretty old acer lap top. I used to run xubuntu on it, then I formatted it and installed freeBSD just to check them out. I tried to install last version of xubuntu then, and I got a message that /dev/../loop0 couldn' d mount or sth then I learned about lubuntu and I tried to installed them but I tried both a dvd and a cd and on both cases after I select language and "install on this machine" I just see a screen with 4 red dots writing "Ubuntu 10.10" that stays like this forever.. and nothing happens. the same if I select to boot from the cd just to check the environment. I then tried a ubuntu-studio dvd I had handy just to see if this would work - and it started installing as expecting, I cancelled it after a while. how to get lubuntu running?
I'm trying to install Lubuntu 10.10 on a board with a AMD Geode LX800 @ 500MHz and 256 MB of memory. I've been sucessful in running in Live Cd mode from a CF card, however when trying to install it gets stuck with either this message "syscall_call+0x7/0xb" or this "kernel_thread_helper". I've tried to install with this parameter "acpi=off", but still no sucess.I've tried to install from a external cd drive to a CF, from a USB pen drive to a CF, from a CF to a HDD, etc...
PS. I've also tried other distros however only this and Xubuntu were able to go into Live CD mode, and Xubuntu was slow, very slow.
I'm currently stuck at the "lubuntu - Install lubuntu" screen on a Dell Optiplex GX150 (specs; Pentium III 1 GHz, 512 mb RAM, 20 GB HDD). I can hear the CD spinning up but nothing happens. Looking at the specs, the PC should be able to run lubuntu, right? Could somebody point me in the right direction? I've verified both the ISO and the CD checksum, both check out, so there should be no issue with the install media
I installed Lubuntu 10.04 yesterday (yay, my first serious installation!), and I was trying to install the drivers for my video card (GeForce 6200), when it told me that it couldn't use ld. After oing some research I found out that it was in binutils. So I went over and got it and tried to ./configure it when it told me that there weren't any C compilers in $PATH, so I went over to the gcc homepage with a fine-toothed comb and found gcc 4.5.0. When I tried to./configure it, it also told me that there aren't any C compilers in $PATH.
I have the same problem with an Ubuntu 10.04 live CD. Whenever I attempt to boot (Lu|U)buntu from a live CD/USB, on most computers. it works just fine. However, on two computers, the live media starts off just fine with the main menu (Try Ubuntu without installing, etc.), then, when I select any option except 'Boot from First Hard Disk', after a few seconds, the CD stops spinning or the USB loses power. I'm convinced it's not a problem from the media, since it works perfectly fine on some computers.
Sysinfo: Code: Host Name: OWNER-PC OS Name: Microsoftr Windows VistaT Home Premium OS Version: 6.0.6001 Service Pack 1 Build 6001 OS Manufacturer: Microsoft Corporation
i've been using ubuntu with wubi, and I'd like to install it on my new hard drive (so windows is on one hdd and ubuntu is on another). afaik, grub will be installed on the hdd w/ ubuntu, and i have to set it to recognize the other (windows) hdd. assuming that i want to get rid of ubuntu and just use windows, what steps do I have to take to do so? (if grub is only on the ubuntu hdd, then would I just have to format it?)
I installed Ubuntu 10.10 amd64 (and tried 10.04.2 as well) from Wubi under Windows 7 64-bit. When I reboot after installing it through Windows, I go to Ubuntu and the installation completes. Then it reboots again to finish the install of the OS. When I boot into Ubuntu now, grub does not appear. Instead, some initramfs stuff comes up in a console with no GUI and says some error stuff about root devices. I read that grub updates cause problems, but the installation never finished and therefore I was never able to go into Ubuntu to lock grub packages, etc. I've run into this error on multiple fresh installs.
I am helping my pal to get into Debian (yes first timer).He is running W7 on a 500G SATA HDD and he has another 250G SATA HDD that he wants Debian to go to.Will Debian install grub on the master bootloader even if the installation is going on a separate hard drive?I have dual boot before but on the same hard drive.
I am just starting to learn how to work with a Linux OS and was planning on using a bootloader to start my PC so that I could choose which OS I wanted to start, enabling me to mess around with them without needing to worry about hosing my system.Also, my studies are taking me deep inside how the Linux OS system works in general and was hoping that I could also get some advice on where to start separating GNOME from the OS to find out exactly how they work together, how the OS works with services, etc. because I am trying to learn everything that this entails.
I installed Windows 7 First then give partition space of 25 GB for my Ubuntu. However, I prefer using Windows 7 BootLoader instead of using Ubuntu BootLoader.
What is the preferred bootloader with Ubuntu 10.04 and windows 7, when multiple booting also with Vista and XP all on one hard drive and each on separate partitions? All are installed except Ubuntu and now boot with the windows boot manager. I have heard that if you install grub 2 on the MBR, then boot windows 7, that it will replace the grub boot code with windows boot code automatically. So is it best to use that NeoSmart EasyBCD tool to add Ubuntu in to the windows boot manager, and can I install grub on the boot sector of Ubuntu's root partition ?
I have two installs on the same drive but different partitions. First I installed XBMC live which is based on Ubuntu (I don't know the exact verion but I think it's in the 9.x).Then I installed full Ubuntu 10.04 on another partition. Now it uses grub2 off the second partition. I configured it to boot XBMC as default and I've had no issues with it. However in the end I rarely use Ubuntu since this is really HTPC. I thought maybe it would be cool to check emails and do some web browsing on my TV, but it turns out I prefer just using a regular computer for that. So I want to delete the partition, but I'm worried doing so will make the system not boot anymore unless if I reinstall XBMC live, I don't want to do that either since I've got it configured all properly and I don't want to mess that up. So I believe I have to change the MBR to point to the XBMC partition although I haven't quite figured out how to do that.
I am installing version 10.10. Does it matter where I install the bootloader? There are selections for the entire device and each partition. I have Windows 7 on /dev/sda1 and Ubuntu on /dev/sda3. The last time I tried this I couldn't go back to Windows 7 even after using the grub-update commands.
I tried to install Ubuntu 11.04 via .iso + USB key to my Asus EeePC 1000HE. This computer comes with two partitions already on the hard drive so I installed to the empty one, to dual-boot with Windows XP on the other. Installation seemed to work, but after resetting, the computer always boots straight to Windows, not Ubuntu or an OS list.From my Ubuntu boot USB, sudo fdisk -l shows that the installation wrote to the partition successfully.From Windows, the partition appears to have disappeared.So it seems that the installation worked except that I have no way to boot to Ubuntu.
I have seen multiple others with this problem, I now have it too. I had Ubuntu 10.10 installed on my entire disk, then I installed Fedora 15 with it. The resizing-the-disk went smoothly, everything is great, but now when I turn on my machine, I get no grub, no boot loader, nothing. I just get thrown right into Fedora. I saw on a few other posts that if you manage to get into Ubuntu, you can open a terminal and type something along the lines of sudo grub update, and that would do the trick. The only issue is that I can't even get into ubuntu. I also was told that if you boot from a livecd you can edit the boot config, or view it, or something. I'm pretty new to all this "bootloader grub" jazz, and am hopelessly confused. How do I make it so that upon startup, I am able to choose between Ubuntu and Fedora?
