Ubuntu Installation :: Boot Screen Does'nt Change After Upgrade To 10.10?
Oct 13, 2010i have upgraded my ubuntu 10.04 to 10.10 with network upgrade.but plymouth boot screen does'nt change and it's still the purple one for 10.04.
View 1 Repliesi have upgraded my ubuntu 10.04 to 10.10 with network upgrade.but plymouth boot screen does'nt change and it's still the purple one for 10.04.
View 1 RepliesI'll say up front I'm still new to Ubuntu, so if I've missed anything obvious please forgive me. I chose to upgrade my 9.10 installation to 10.04 via the update manager. Especially since I was going to be gone for long periods of time, this seemed like a good idea.
Downloading went fine, but I had to leave for a two day trip once I clicked install. When I returned, I noticed the machine was still on the purple loading screen with four dots. When I shut it down and rebooted, it got to the same screen. Pressing escape to show the text behind the screen showed two fails and one oddity:
(1) Setting sensors limits "Rather than invoking init scirpts through /etc/init.d, use the service( utility, e.g. service S49console-setup start
Since the script you are attempting to invoke has been converted to an upstart job, you may also use the start( utility, e.g. start S49console-setup start: Unkown job: S49consile-setup"
(2) Starting VirtualBox kernel modules No suitable module for running kernels found
[Code]...
I did a clean upgrade to lucid 10.04 from Karmic 9.10. After the installation, the boot was stuck at the purple screen with red and white dots.I did this on Dell XPS M1530 laptop and there was no problem in Karmic.
1. I found a temporary solution. After being stuck here, I simply go to tty1, login and startx. Now, I could work normally but if I go to tty1 and then to 'Ctrl-Alt-F7', I could still see the purple boot screen whereas 'Ctrl-Alt-F8' brings me to the normal GUI. How do I get rid of this purple boot screen ?
Searching on google suggested:
2. Remove 'quiet splash' and instead use 'nomodeset'. When I did this, I got the black screen with the messages during boot but it still got stuck. Importantly, there was no login prompt at tty1 or other ttys. Some messages towards the end where boot got stuck are below. Please help as I did like a fix to this.
I have just upgraded my FC12 installation to FC13. The initial boot failed (just blank screen). Second time I received 'selinux targeted policy relabel is required'. I let that run, but still the boot did not suceed.
I then went in to verbose boot and saw that the boot would hang at libvirtd. So I disabled libvirtd for anything above run level 1. Next boot failed at atd, disabled atd. Next boot failed at 'monthly Smolt checkin'.
At that point and booted in to single user mode and dissabled SELinux, thinking that was the cause of all the problems. That did not help.
The update process has also removed my previous kernels, so I can't test a different kernel
i used to have 9.10 but now upgraded to the latest version. Back then I changed the background to full black for both the preboot screen and login screen.Now after upgrading it changed it to the purple color screen. I am wondering how I can change back the background color?
View 1 Replies View RelatedI can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedI currently have a Windows XP OS which i want to dual-boot with Ubuntu Linux 10.10 . I put the disk in the drive and chose the option to install Linux through Windows. But it hangs in the middle. I am also unable to change my BIOS settings due to which i can"t change my boot preference. My first Boot is the HDD. I want to change it to CD-ROM. Any suggestion? I also have another PC where i can boot through the CD...I tried installing there by booting from the CD but i get this error message after seeing the purple Linux screen with the loading dots. "(Process:286):Glib warning**:getpwuid:failed due to unknown user id (0)
P.S.- I am not able to see any options while the boot is going on
I have Ubuntu 9.10, does anyone know how to change the default boot screen (with the Ubuntu name and the light). Also, the sound that comes with this screen?
View 1 Replies View RelatedI had installed Ubuntu And Kubuntu Dual-Boot, at the Boot-screen i see the following two OS to enter....but i want to change their title names(Which is displayed at Boot-Screen). My Boot-screen picture is attached herewith. I want to change these names to Ubuntu & Kubuntu Respectively.
I have also checked menu.list but their i am unable to find Following titles(Which i have showed in picture, exceptMemtest 86+)
Last night I upgraded from 9.04 to 9.10 in search of faster internet (which I got by the way), but now whenever I try to boot it goes to a blank screen for about 10 minutes befor going to the desktop. Its completely blank and has no cursor or anything. It's a huge problem and I could really use some help. 9.04 never did this.
View 9 Replies View RelatedI'd like to change the boot splash screen from the current 'Xubuntu' text in white on a black background.Making changes in Settings->Xfce 4 Setting Manager->Session and Startup has had no effect, and Startup Manager does not display an option to change the splash. I feel I'm missing something obvious here, but where should I be looking?
View 1 Replies View RelatedI have a Dell dimension 8300 dual booting with windows 7 and ubuntu 10.10. I installed BURG on it since I didnt like the text grub style. Problem is I cant change the splash screen no matter what I do, or changes I make. My screen resolution is 1280x1024 and my video card is an Nvidia card.
Originally the splash screen was a purple screen with ubuntu 10.10 white text and some dots on it. After installing the plymouth themes, now it has changed to a blue screen with Kubuntu(?) on it... Id like to know whats wrong and how can I change the splash screen?
UPDATE: Ok I went to synaptic and saw plymouth.kubuntu-logo and kubuntu-text were installed and enabled (had litle ubuntu logo to the side). So I removed those 2 files then did a reboot. Now im back to the purple screen with ubuntu 10.10 white text and the dots but I still cant change the splash screen...
I think many are having this problem...9.10 works on the PC , but NOT 10.4 LTS or 10.10 ...all I get a black screen on boot up, although it "sounds" like its working in the tower..,,, QUESTION!!...is there a simple download ANYWHERE that will fix this as I am only a newbie Linux end user with average PC skills.....also ...Will there continue to be security updates for (9.10) after this April 2011, or must I find a way to upgrade in order to have a secure Distribution ..I have a Compaq Presario SR1901WM with HDA Nvivia.
View 3 Replies View RelatedUsing LTS 10.04. How do I change my boot splash and login screen? (in the past I would). It was just system->admin->login screen but all the options are missing! See attached screen shots.
Tried to reinstall it.
xxx@xxxx:~$ sudo apt-get install gdm-themes
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package gdm-themes is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or is only available from another source
E: Package gdm-themes has no installation candidate
Ubuntu changed something and I don't what it is (I cant even figure what to search for)
- The first screen is my desktop system->admin->login screen
- The 2nd is what should be there. system->admin->login screen
I have just finished updating my older box from 8.10 to 9.04 and installing a bunch of programs. I had shut it down several times between sessions but when I unplugged it and moved it, it fails. It goes fine through the BIOS and GRUB (I think) but then when there is a screen of text it flashes to black several times and then displays a screen that looks like static with "Ubuntu" barely visible in several places.
View 8 Replies View RelatedI just recently installed updates from Ubuntu and the system is hosed. I get the Ubuntu screen that flashes real quick then it goes to the Nvidia like cursor. I am pretty sure something is hanging up on startup. I cannot get to a console, cannot do anything but reboot with ctrl alt del. Then I get the briefest flash of the screen but not long enough to see where it was hanging up at. I ran the same updates on this machine, if I could get the old school informitive startup screen instead of the windows like tell you nothing start up screen I might at least know where to start looking. Right now I have zero clue as to what the updates broke. I cannot even get to log files as there's no console, no ssh, nothing. version is Ubunto 10.4 LTS.
View 4 Replies View Relatedi decided i wanted to change my boot screen and i installed plymouth themes and used solar and now that i dont like any of the Plymouth themes, i want the original purple boot screen back but i dont know how and it would be awesome if somebody could tell me P.S I'm a bit of a linux noob so sorry if i got anything muddled up lol
View 3 Replies View Relatedhow to change the boot splash screen in Ubuntu (it's using xsplash) but since openSUSE is most likely a bit different, i would like to find out how i can change it here, on openSUSE 11.2
View 1 Replies View RelatedAfter doing a dist-upgrade today, my one year old install of squeeze will no longer boot. It stops with a black screen and has to be hard reset. Cant even get to tty1. The last line in dmesg is: cfg80211: Calling CRDA to update world regulatory domain
mike@vaio ~ $ lspci | grep Network 06:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100.Just wondered if anyone has any ideas before I restore from a backup?
I have tried this with many different configurations, however, I believe that the scroll bar that shows the progress of the boot is preventing it from changing successfully. I don't know how to switch it off. X is not installed. No gui, only tui.
View 5 Replies View Relatedthere is a way to change the OS boot screen from the blue loading bar at the bottom to something more fancy. For example if you take a look at Oracle Enterprise Linux 6 they have a loading screen that makes an "O" on start up. Note: I am not talking about GRUB, I already know how to change the grub boot screen. If so can someone provide the steps needed to modify the OS loading screen.
View 1 Replies View RelatedIn PCLinuxOS LXDE how can I change (or stop) the boot up splash screen and is there an icon (or shortcut keys) to force quit (kill) a program like this one for Ubuntu?
View 2 Replies View RelatedI want to change the Boot sequence in Ubuntu 10.04.
In the past I have used
Quote:
But with 10.04 this returns a blank screen. I assume something has changed.
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies View RelatedI am attempting to try install XUbuntu.
I loaded the dvd (one that came with Linux Format Magazine No. 139), changed BIOS to boot from dvd, and then:
I get the welcome screen with the options to boot Ubuntu, KUbuntu, XUbuntu or Boot from First Hard Disk. As I have an older laptop I was going to try XUbuntu. However, the arrow keys did not change the boot option. In fact nothing worked, Tab did not bring up a menu and Enter did not initiate boot.
I tried reloading the dvd, switching off the laptop (no way to shutdown) and restarting but always come up with the same problem.
My DVD drive works fine and the dvd appears not to be faulty since all the info is readable when it is loaded with windows running.
My system details are:
HP compaqnx9000
Mobile Intel Pentium(R) 4-m CPU 2.20 GHz 219GHz 704MB RAM
Optiarc DVD RW AD-7580A
Radeon 1GP 340M
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
I am trying to upgrade my system from 7.04 to a current version. I now face the known problem that my machine tries to download everything from archives.ubuntu.com although it has all been moved to old-releases."If you have this problem, you could change your /etc/host file to point archive.ubuntu.com to old-releases. Do this by running host old-releases.
ubuntu.com | grep address | awk '{print $NF" archive.ubuntu.com"}' | sudo tee -a /etc/hosts."
I have tried typing that information into the command line, with no success. I opened the /etc/hosts file in emacs (using sudo) but did not see an obvious place to impliment the fix.
I could upgrade openSUSE 11.4 on my desktop but when trying to do the same procedure on my girlfriend's laptop, after the zypper update part (and the reboot asked), now we can get it to boot.
After selecting suse from GRUB it shows some code (too fast to be read) then black screen forever. I erased the VGA option before booting and now it gets stuck in
Code:
[0.490266][<c02037a6>] kernel_thread_helper+0x6/0x10
We don't have any idea of what to do ;__;
Dual booting Windows 7 and Fedora 15. What I would like to know is if I can change the boot order to boot Windows 7 first and Fedora 15 as other or second.
View 5 Replies View RelatedHowever, the option to upgrade to 11.04 has recently become available in the Update Manager.
If I choose to follow this upgrade path, will my existing user settings such as nautilus shortcuts, wallpaper and other personalised settings be changed or reverted to default in any way?
Or will the upgrade execute, and leave everything looking and working exactly the same?