Ubuntu Installation :: Upgrade To 10.04 - Boot Screen Hang?
May 2, 2010
I'll say up front I'm still new to Ubuntu, so if I've missed anything obvious please forgive me. I chose to upgrade my 9.10 installation to 10.04 via the update manager. Especially since I was going to be gone for long periods of time, this seemed like a good idea.
Downloading went fine, but I had to leave for a two day trip once I clicked install. When I returned, I noticed the machine was still on the purple loading screen with four dots. When I shut it down and rebooted, it got to the same screen. Pressing escape to show the text behind the screen showed two fails and one oddity:
(1) Setting sensors limits "Rather than invoking init scirpts through /etc/init.d, use the service( utility, e.g. service S49console-setup start
Since the script you are attempting to invoke has been converted to an upstart job, you may also use the start( utility, e.g. start S49console-setup start: Unkown job: S49consile-setup"
(2) Starting VirtualBox kernel modules No suitable module for running kernels found
[Code]...
View 9 Replies
ADVERTISEMENT
Jun 21, 2010
Upgraded dual boot XP / Ubuntu 2.6.31-22 (still works) to 2.6.32-22, which hangs on boot. "2.6.32-22 recovery mode"(and "continue" dies at "Checking battery state". Ctrl Alt F3 gets a prompt and the login works.
The machine is a Thinkpad g40, which has worked on 9.10, except for wireless distance issues (the G40 has the Atheros AR5211, which seems to be a problem, at least per the forums, and my distance limits experience)
I get the same mount and chroot messages, followed by scrolling msgs, and then a blank screen on attempting to boot 2.6.32-22. And, as indicated, 2.6.31-22 boots and the apps I checked work fine. On the upgrade, there were several msgs about non supported apps and a grub question, which I (naively) answered as use the package version (and was somewhat surprised when dual boot still worked - but impressed and happy
I cloned my hard drive prior to the upgrade, so can revert to 9.10, but would like to run 10.04 LTS. Any suggestions. or should I wait for a while to upgrade?
View 6 Replies
View Related
Aug 2, 2010
I've down loaded the live CD for SUSE 11.3 and, using isohybrid and dd, I put the contents onto a USB stick and made it bootable. All good so far.
I then installed SUSE on one of the partitions on my hard disk (Windows is also on the disk). I set 4GB for SWAP, 16 GB for ROOT and the rest ~270 for /HOME.
I set the bootloader to be installed in the MBR.
The installation completed with no problems indicated.
I was asked to reboot and did so, removing the usb stick so that 11.3 would boot.
The reboot failed! I was presented with a black screen and nothing else happened.
I tried again, selecting openSUSE 11.3 from the boot menu. - Again a black screen shortly after pressing enter.
I can boot in Failsafe mode and then login with text prompt. I can't boot into runlevel 3 (same problem - black screen)
Does anyone know whether this is a problem with network configuration or graphics?
I have a notebook with ATI Radeon Mobility HD 5650 graphics card and
ATHEROS ar8132 ethernet controller.
View 1 Replies
View Related
Oct 13, 2010
i have upgraded my ubuntu 10.04 to 10.10 with network upgrade.but plymouth boot screen does'nt change and it's still the purple one for 10.04.
View 1 Replies
View Related
May 28, 2010
I did a clean upgrade to lucid 10.04 from Karmic 9.10. After the installation, the boot was stuck at the purple screen with red and white dots.I did this on Dell XPS M1530 laptop and there was no problem in Karmic.
1. I found a temporary solution. After being stuck here, I simply go to tty1, login and startx. Now, I could work normally but if I go to tty1 and then to 'Ctrl-Alt-F7', I could still see the purple boot screen whereas 'Ctrl-Alt-F8' brings me to the normal GUI. How do I get rid of this purple boot screen ?
Searching on google suggested:
2. Remove 'quiet splash' and instead use 'nomodeset'. When I did this, I got the black screen with the messages during boot but it still got stuck. Importantly, there was no login prompt at tty1 or other ttys. Some messages towards the end where boot got stuck are below. Please help as I did like a fix to this.
View 6 Replies
View Related
Jan 17, 2010
But when i try the Ubuntu Server Edition, using the same method of burning the iso file i downloaded from ubuntu homepage into a cd, and when i reboot my pc and the screen display the following:ISOLINUX 3.63 Debian 2008-07-15 Copyright (c) 1944-2008 H. Peter Anvin
Loading...Initializing gfx codeand it hang there.Do anyone know what happened? I have verified the file i download and the disc i burnt through MD5SUM.
My Laptop spec:
Intel(R) Pentium(R) M Processor1.86GHZ
1GB Ram, 80Gb Hardisk
OS1: Microsoft XP Home edition SP2
OS2: Ubuntu Desktop Edition
View 3 Replies
View Related
Jan 8, 2011
I upgraded my ubuntu 64 bit from 10.04 to 10.10 using the update manager on my Laptop ASUS, F80Series, 4Gb Ram, CPU Duo T8100. Ubuntu 10.10 could never boot: it always gets stuck. I tried the "recovery mode". The last two messages written, before getting stuck are:
[1.729408 ] NET: Registered Protocol Family 1
[1.730110] Registered Taskstat Version 1
View 9 Replies
View Related
Sep 19, 2010
I have just upgraded my FC12 installation to FC13. The initial boot failed (just blank screen). Second time I received 'selinux targeted policy relabel is required'. I let that run, but still the boot did not suceed.
I then went in to verbose boot and saw that the boot would hang at libvirtd. So I disabled libvirtd for anything above run level 1. Next boot failed at atd, disabled atd. Next boot failed at 'monthly Smolt checkin'.
At that point and booted in to single user mode and dissabled SELinux, thinking that was the cause of all the problems. That did not help.
The update process has also removed my previous kernels, so I can't test a different kernel
View 5 Replies
View Related
Jun 13, 2009
[code]...
when trying to choose the Linux partition, I found that it would just hang at a blank screen. Looking further into the problem, I had booted with the Linux Rescue and checked the /boot/grub/grub.conf file. It appeared to be that the menu was set to hidden. I got rid of that line, and checked the boot arguments. It still had acpi=off set with the kernel and everything else seems to be in order. Root is set to root (hd0,2) which should be correct.
View 6 Replies
View Related
Feb 15, 2010
New install of Fedora 12 64-bit from DVD on an Optiplex 740 (AMD) with 8GB memory I had to use the mem= option to get the install past the EDD probe, but it seemed to install successfully. Now on boot it goes all the way through the "filling icon" progress meter, then switches to a completely black screen with an X pointer cursor that responds to mouse movement, but nothing else happens. Ctrl-Alt-F{2-5} do not switch to a console login, so the system's inaccessible.
View 10 Replies
View Related
Mar 18, 2011
Now, all of a sudden, after I restarted after a system update, My dell desktop inspiron hangs on boot. The kernel is: 2.6.34.8-68.fc13.i686. Not only that, but the system won't boot for any of the remaining previous kernels.
View 6 Replies
View Related
May 27, 2011
i have just upgraded from f14 to f15 using preupgrade. i am now still waiting for the first boot to finish. the screen is stuck for more than an hour and the last line written was:
Started LSB: Start up the OpenSSH server daemon. and there is a blinking cursor.
View 3 Replies
View Related
Jun 17, 2009
I installed F11 x86 from the DVD onto one of my machines using a total of 4 partitions:
1. /boot
2. /
3. /home
4. swap
I then created an image of the first 3 partitions with fsarchiver and restored it onto a second machine (with different hardware). Grub was loaded onto the second machine as well without a problem. The new cloned install will get past grub fine but the kernel hangs. After removing 'rhgb quiet' from the boot options, I can see that the last message outputted to the console is something about the PS/2 mouse - this doesn't make sense as the mouse is working perfectly fine.
Additionally, I can still reboot using ctrl-alt-delete so the kernel/CPU must still be responsive. I have tried troubleshooting the various pieces of hardware, so I'm guessing it's something with the clone. All the cloned filesystems appear to be fully intact; the partition UUID's are all the same. I've even tried changing the UUID's both in grub and /etc/fstab to hardcoded /dev/sdaX , but this does not fix anything.
View 2 Replies
View Related
Apr 18, 2010
New to Linux and am wanting to install ubuntu 9.10 or 10.04 on a single separate 80gb drive. I have Windows installed on 2 80gb drives in Raid0 (nvidia controller) .I have installed 9.10 but Win7 will not load from the bootloader : gives me the error invalid signature. I've looked around and tried a few things to get it to load with no success.. is the Raid0 the issue?
If I try to install 10.04 it will hang and eventually errors out, I believe on the raid drive because it comes up with dev/mapper/nvidia_hhfbdccf1..
View 1 Replies
View Related
Oct 1, 2010
I have a roughly 3-year old PC that I put together from parts (listed below) that has been running great with various flavors of Linux as the sole operating system. It is currently running Ubuntu 10.4. A couple of months ago, it started to have intermittent problems booting. The machine will hang before it gets to the Ubuntu "boot" screen with the dots that show progress as the machine boots. If I look at the power on messages from the BIOS, it fails at different points in the process - sometimes during the memory test, sometimes during the search for IDE drives. It fails about 2 out of every 5 attempts to boot. It sometimes takes 2-3 tries at booting before it actually works. Sometimes when it does boot, the Ethernet jack doesn't work and I see errors in syslog about there not being a carrier.
There are no syslog entries when the machine does not boot.The machine is plugged into a UPS. The UPS indicates that it is running at 13% of capacity at 123V/60Hz. I'm in the US.Once the machine boots normally, it will stay up without issues for days.I've checked the 4GB of RAM (I added 2GB to the original 2GB several months ago) using the memory testing application on the System Rescue CD and no errors were found.I've replaced the motherboard battery, which seemed to help for a few weeks, but then the problem returned.I've checked the hard drive for errors using the SMART diagnostics tool in System -> Administration -> Disk Utility and buy running fsck.The interior of the case is not very dusty and all the fans appear to be working.Are there things I can do to investigate and fix this issue other than starting to replace components - starting with the motherboard and the power supply?The parts of the machine:
CPU INTEL|C2D E6850 3G 65N 4M R - Retail (Qty=1, Price=$279.99)
CASE ANTEC|P180B BLACK RT - Retail (Qty=1, Price=$114.99)
MB GIGABYTE GA-P35-DS3L P35+ICH9 - Retail (Qty=1, Price=$111.99)
[code]....
View 2 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Oct 30, 2009
I have just completed an upgrade from 5.3 to 5.4 (64bit) Now when the system starts it gets to Staring udev and then hangs for about 2mins before printing "Timeout" and then continuing.
At various stages during the boot process it just stops with no warning and takes a while to restart.
My boot time in 5.3 was about 50seconds, now with 5.4 it is about 4mins.
View 2 Replies
View Related
Apr 7, 2010
Last night I upgraded from 9.04 to 9.10 in search of faster internet (which I got by the way), but now whenever I try to boot it goes to a blank screen for about 10 minutes befor going to the desktop. Its completely blank and has no cursor or anything. It's a huge problem and I could really use some help. 9.04 never did this.
View 9 Replies
View Related
Apr 3, 2011
I think many are having this problem...9.10 works on the PC , but NOT 10.4 LTS or 10.10 ...all I get a black screen on boot up, although it "sounds" like its working in the tower..,,, QUESTION!!...is there a simple download ANYWHERE that will fix this as I am only a newbie Linux end user with average PC skills.....also ...Will there continue to be security updates for (9.10) after this April 2011, or must I find a way to upgrade in order to have a secure Distribution ..I have a Compaq Presario SR1901WM with HDA Nvivia.
View 3 Replies
View Related
Mar 29, 2010
i'm running ubuntu (32bit) on a quad core compaq presario with 3.9gb of ram and a 500gb HDD.sometimes when i have few windows open (nautilus, firefox) and i'm watching a movie the hard drive will spin up for no reason and everything on screen will hang for a few seconds.i did a hard drive check and everything seems to be ok there. i have a geforce 8600 gt with the recommended 185 driver installed.i'm wondering what the problem is? could it be hardware?
i've noticed this is happening from time to time, no matter what i'm doing. First the computer beeps then the hard drive speeds up and everything lags.
View 9 Replies
View Related
May 2, 2009
I have just finished updating my older box from 8.10 to 9.04 and installing a bunch of programs. I had shut it down several times between sessions but when I unplugged it and moved it, it fails. It goes fine through the BIOS and GRUB (I think) but then when there is a screen of text it flashes to black several times and then displays a screen that looks like static with "Ubuntu" barely visible in several places.
View 8 Replies
View Related
Feb 15, 2011
I just recently installed updates from Ubuntu and the system is hosed. I get the Ubuntu screen that flashes real quick then it goes to the Nvidia like cursor. I am pretty sure something is hanging up on startup. I cannot get to a console, cannot do anything but reboot with ctrl alt del. Then I get the briefest flash of the screen but not long enough to see where it was hanging up at. I ran the same updates on this machine, if I could get the old school informitive startup screen instead of the windows like tell you nothing start up screen I might at least know where to start looking. Right now I have zero clue as to what the updates broke. I cannot even get to log files as there's no console, no ssh, nothing. version is Ubunto 10.4 LTS.
View 4 Replies
View Related
Sep 5, 2010
Seems that my kernel was the problem then I update it manually but I want a update in Kernel, but keep in boot my current kernel and add the update kernel on boot, how to? The X, mouse and other freeze but audio still running along with crtl+alt+f2:[URL].. Jay Ashworth 2010-09-05 04:03:09 UTC
"2) Flashplayer in fullscreen freezes X; the audio from the video keeps playing continuously, not in a loop, but the video freezes, and (in some cases) the user can switch to a text console--possibly only once--and kill X without having to reboot. This latter description is pretty clearly the actual bug here on 620157, and if you read all 4 descriptions, you can see that the other three are *not* this particular failing."
View 9 Replies
View Related
Aug 11, 2010
After doing a dist-upgrade today, my one year old install of squeeze will no longer boot. It stops with a black screen and has to be hard reset. Cant even get to tty1. The last line in dmesg is: cfg80211: Calling CRDA to update world regulatory domain
mike@vaio ~ $ lspci | grep Network 06:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100.Just wondered if anyone has any ideas before I restore from a backup?
View 3 Replies
View Related
Jan 17, 2016
I have recently installed Debain Testing 11/01/2016 build on my laptop..
Using gdm3 as my displayManager and Gnome3..
After i put my Login ID and Password the System Hangs..
And if i use lightdm then it hangs during boot..
View 1 Replies
View Related
May 27, 2011
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies
View Related
Jun 1, 2010
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
View 2 Replies
View Related
Jan 9, 2011
My machine is running in Pentium(R) 4 CPU 1.7Ghz, Nvidia legacy Riva tnt/tnt2 and a 512mb ram. I have a Network adapter, Realtek RTL8139 Family PCI Fast Ethernet NIC. I have installed Ubuntu in my Window Xp, and used the ACPI workaround to install ubuntu on my PC. Now that I have installed Ubuntu, when I try to boot ubuntu, it always hang before it start to boot.
View 5 Replies
View Related
Aug 18, 2015
My system is hanging on screen suspension... And its not the usual hang on "sleep" or others similars, it will happen by only having the screen on stand-by ( eg xset +dpms)...
If I leave for a while the screen will shutdown as expected but computer will completely hang after an indefinite time, it will not respond to outside connections and the will be spinning faster than usual...
Only workaround is to have the screen power save option disabled, in my case, on the KDE settings...
I have tried the most common solution to have "nomodeset" as a kernel option to disable mode setting, but this doesn't seem to work...
Also tried to forcebly reproduce the issue with Code: Select allxset force dpms standby/suspend/off but nothing happens like that...
This issue also only appears with the fglrx driver, open-source works well.
View 0 Replies
View Related
Aug 19, 2009
This is probably not possible, but just wondering, restarted centos 5.2 remotely, hung at shutdown, kvm'ed to see what was hanging it up, control c'ed and then ctl alt del, just trying to kill the process, was brought back to the login screen, but unable to type anything. Alt-f1 switched to a different virtual console, which was just a blank screen and a blinking cursor, but now able to type things. Want to avoid hard shutdown. Is there anyway to force shutdown/reboot the machine from this console?
View 1 Replies
View Related
