how to change the boot splash screen in Ubuntu (it's using xsplash) but since openSUSE is most likely a bit different, i would like to find out how i can change it here, on openSUSE 11.2
View 1 Replies
I have never been able to see the splash screen, something that I'd like. I have checked the options on the bootloader and it says "splash=silent" (that's disabled?). I found it confusing, because the ubuntu kernel boots with "splash" but when I try that option on OpenSuSE 11.2 it doesn't.Also when I shut down the laptop the screen goes crazy, only the two top cms shows "something" which are blinking and crazy green and white console words moving from one place to another so fast I can't even been able to read what it actually says.Either way, the laptop shuts down without any problem (?). I think is the normal shutdown process (without splash) but it's a bit perturbing. I've had had a couple of kind of "aesthetics" issues, but far from critical. My overall experience with OpenSuSE after 4 or 5 years being "debianized" have been very nice .
View 3 Replies View Relatedi changed the boot up resolution in the boot up loader to 1366*768 (native res of my monitor) the boot option is still set to quiet splash however, instead of showing the progress bar, it would now always display the complete boot up log ( the list of starting services and such) i then manually changed the boot option from to 1024*768 at boot loader screen, and teh splash would show up, but then on next boot up if i stick with 1366*768, it doesnt work again
View 4 Replies View RelatedI noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3
Kernel-pae 2.6.38.2-4.1 from Kernel Stable.
GRUB 0.97-174.1 from openSUSE 11.4
Upstart 0.6.5-33.1
xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?
I'd like to change the boot splash screen from the current 'Xubuntu' text in white on a black background.Making changes in Settings->Xfce 4 Setting Manager->Session and Startup has had no effect, and Startup Manager does not display an option to change the splash. I feel I'm missing something obvious here, but where should I be looking?
View 1 Replies View RelatedI have a Dell dimension 8300 dual booting with windows 7 and ubuntu 10.10. I installed BURG on it since I didnt like the text grub style. Problem is I cant change the splash screen no matter what I do, or changes I make. My screen resolution is 1280x1024 and my video card is an Nvidia card.
Originally the splash screen was a purple screen with ubuntu 10.10 white text and some dots on it. After installing the plymouth themes, now it has changed to a blue screen with Kubuntu(?) on it... Id like to know whats wrong and how can I change the splash screen?
UPDATE: Ok I went to synaptic and saw plymouth.kubuntu-logo and kubuntu-text were installed and enabled (had litle ubuntu logo to the side). So I removed those 2 files then did a reboot. Now im back to the purple screen with ubuntu 10.10 white text and the dots but I still cant change the splash screen...
In PCLinuxOS LXDE how can I change (or stop) the boot up splash screen and is there an icon (or shortcut keys) to force quit (kill) a program like this one for Ubuntu?
View 2 Replies View RelatedI'm very much new to linux using 11.3 Gnome. I want to change my login window and splash screen. I went through lot of sites but I couldn't find the answer.
View 1 Replies View RelatedHow can i change the opensuse 11.2 boot splash?
The olive green loading splash screen during startup.
I want to change the image that is presented to the user when i choose operating system on startup eg back.jpg i have looked at tutorials and no luck
i am running gnome on 11.3.
if there was a way to change the background pictures for the suse grub? I like the "pretty" grub look with the startup options box for boot parameters, just wondering how to change the background pic. Also, I was wondering if there was a way to change the look of splash, other then verbose quiet showtps? I like the verbose with the picture background, nice touch, just wondering how to get that at default&how to change background, colors.
View 9 Replies View RelatedI boot up after a fresh install and I don't get a boot splash screen. I really cant find a way to fix and some times it does not go to the login screen.
View 1 Replies View RelatedI ordered a SuSE 11.4 installation DVD from an online Linux Distro distributer that I've used before with no problems. I did this rather than burn my own DVD from the website. I thought that I might perform a fresh install of SuSE 11.4 on this Dell 1420 Laptop that is currently running Ubuntu 11.04.
Note, this is a completely fresh install, not a side-by-side installation with Ubuntu; I followed the installation sequence that completely repartitions the entire disk for SuSE, and accepted all of the suggested options regarding logon, etc.
Everything goes well ... sort of. The first install didn't reboot correctly, i.e., the set-up that is supposed to run after the initial install never happened and I had to manually power-down the machine and restart from the "safe mode." Needless to say, that didn't work as expected. So, I re-install, from scratch, trying different options: for instance, instead of LVM, I decide to have an un-encrypted partition scheme and accept the "obvious" options ... thinking that the LVM options interacted badly with the install. Eventually I get the installation to proceed correctly, or so it appears: it goes though the entire sequence, including the re-boot, building the default image, etc.
I test this image by removing the DVD, power-cycling the machine, and all looks good, so I begin the process of installing software updates, etc. Being paranoid, I re-boot the machine, and all restarts correctly, etc.
Now here's the annoying thing. The next day, I power the machine on, and it locks at the splash screen. By the way, these are the exact symptoms that I experienced with the bogus/incomplete installations. The boot sequence proceeds up to the splash screen and waits forever.
So, in sum: I spent inordinate amounts of time attempting to install this software, carefully following the instructions provided by the installer. In every instance, after leaving the machine off for a day or so and rebooting, I am met with a splash screen that sits forever. Needless to say, I am extremely reluctant to repeat another day of software installation to only have to re-start with no assurances of success. Either I go back to ugly Ubuntu (which has always worked out of the box, by the way), or I look at other options. I was hoping to use SuSE, but I really don't care which distro is on that machine as long as it works and it provides TeX, R, Emacs, Scheme, and a few other software packages that I'm sure are of no interest to your customer base.
New install on Compaq Presario F700 (F756NR)The install went fine. I was able to get the Nvidia drivers working too. The problem I have is when the system boots. I get the OpenSuse splash screen, and the system just hangs.I found that if I press <Esc> and hit <Enter> a few times, the system will eventually boot. I also found if I wiggle the mouse during the splash screen, the progress bar will begin to move, and the system will boot.Seems to be something about detecting hardware during the boot phase, and it seems to be input related.
My Computer
Folders, Harddisks, Removable Devices, System Information and more...
Disk Information
[code]....
I just installed SUSE 11.2 from a downloaded DVD The installation went correctly but now I boot up the computer and when the login screen appears there will be no box highlighting a user or even a blank box to input user. The restart, suspend and shutdown buttons are not operational. However, if I power down the computer manually and restart the login screen comes up normally.
View 2 Replies View RelatedI just switched back to openSUSE from Fedora linux. I made a clean install of openSUSE 11.4, but had trouble when installing the boot loader. For whatever reason the auto-partition tool hadn't given me a /boot partition even though the GRUB configuration referenced it. So I switched the / partition to /boot and the /home to / and now I don't have a /home partition. Is this why my system won't boot past the splash screen in "normal" mode, but boots fine in "failsafe"?
View 3 Replies View RelatedI had upgraded form OpenSuse 11.3 to 11.4. Everything is fine but I still have old boot splash background
Grub and kdm menus are new but between them I see old image.
How could I upgrade boot splash?
I have poured over many forums and countless posts on how to do this and i cant seem to get it,i have been trying for the past 8 hrs to change the splash screen in my ubuntu 10.04 lts lucid lynx,i have installed startup manager and splash screen and have tried using those to edit my splash screen to no avail i have no idea what im doing wrong
View 2 Replies View Relatedhow do you change the splash screen? i.ve looked all over the internet but common sense tells me to just ask on here.
View 9 Replies View RelatedI finally broke down and upgraded to Lucid since Intrepid reached "end of life", but I liked Intrepid's Ubuntu startup splash screen much better. Is there any way to get that back in Lucid?
View 1 Replies View RelatedWhy is so damm hard to change the splash screen in ubuntu 10.10? Like what's up with that anyways? I've tried like 10 different solutions and not a single one works, I really need this to finish my thin client, it really important that I be able to change the splash screen.
View 5 Replies View RelatedI have Ubuntu 9.10 and I want to replace the splash screen with the white Ubuntu logo and the marquee progress bar with that of Xubuntu with those whirling sparkles.
View 1 Replies View RelatedI've recently upgraded to Ubuntu 10.04 LTS. When I boot up I see this:
[URL]
in a very low resolution
At the login screen and on the desktop my resolution is 1680 x 1080
Is there a way to make the splash screen that resolution as well?
I installed the nvidia driver from the official repository for openSUSE 11.3 and now everything works perfectly, except i get a verbose splash screen after the grub menu.It has worked after i upgraded from 11.2. In my menu.lst it already says splash=silent.If you want more information, please ask, because i don't know where to look or what to show you (i'm fairly new to linux in general).
View 6 Replies View RelatedIt seems to be locked up. i cant change any settings, im familiar with kde 4.3 as ive been a kde user in ubuntu for a year or two. every single button is greyed out. i mostly have default options setup in mandriva, i just started using it.
View 2 Replies View RelatedI am trying to change the splash screen (Lucid 10.4) on an encrypted drive (cryptpo LUKS)
I've used to gimp to modify the png files in /lib/plymouth/themes/ubuntu-logo (both ubuntu_logo.png and ubuntu_logo16.pgn).
These changes show up when the machine is shutting down, but not when it boots (I get the same Ubuntu splash screen that allows me to enter the encryption password). I'm guessing because I'm using an encrypted drive that the plymouth theme and images are stored in an encrypted partition ....maybe /dev/sda1?
Could someone confirm this, or suggest how to change the splash screen for 10.4 if using drive encryption?
How do I change boot splash in fedora 15 fallback mode.
View 2 Replies View RelatedMay i know how to change the ugly purple background on the ubuntu boot splash to other color, say black?
View 2 Replies View RelatedI been trying to change the splash screen, boot screen thing and now when it boots it just goes right to the log-in screen. I installed "startupmanager" but every .so file I try to add, just won't get added for some reason.
View 3 Replies View RelatedI originally have Ubuntu Lucid on my machine. I just installed opensuse 11.2 on another partition without bootloader installed. So I'm still using the Ubuntu Lucid default bootloader grub2. I can boot up opensuse correctly. the nagging thing is that there's no splash screen show up during the boot process, instead, lines of command are flashing, the console background is also missing and the font under console (tty1-6) is huge. what can I do to have these back to opensuse? the current entry in grub2 for opensuse
Code:
menuentry "openSUSE 11.2 (i586) (on /dev/sda2)" {
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set 9ac05ede-e7c4-47f3-b55b-66d5844$
linux /boot/vmlinuz-2.6.31.12-0.2-desktop root=/dev/sda2
initrd /boot/initrd-2.6.31.12-0.2-desktop
}
which parameters should I add?
