However, the option to upgrade to 11.04 has recently become available in the Update Manager.
If I choose to follow this upgrade path, will my existing user settings such as nautilus shortcuts, wallpaper and other personalised settings be changed or reverted to default in any way?
Or will the upgrade execute, and leave everything looking and working exactly the same?
I've been running Fedora Core 3 on a P4 450 as a personal Samba server and domain controller. It's worked so well that I never gave any thought to upgrading. The other night, I noticed that Up To Date wasn't working, and that Firefox was acting strangely. I made the FC 13 installation disks, whereupon I found out that the system didn't have enough memory.
Rather than mess with the P3 450 any more, instead I swapped main boards and decided to do an upgrade. it even possible to do an "upgrade" from 3 to 13? Is it possible to maintain my existing partitions/settings. I've backed up everything that I'd be too unhappy to lose. It's a two drive system and the second is nothing but data, none of it catastrophic to lose, but at least disappointing. I'd like to keep the data and settings on the primary disk, but won't cry if I can't.
Does anyone know how to install the Default KDE Desktop settings in an existing user? I copied a user's home directory from another Linux and when I added the user using adduser on the new intallation, it did not copy any of the Desktop or other .rc/.profile settings.
Is there a script that is run by adduser, or a list somewhere of the files that are needed for KDE Desktop to work correctly? Or, do I delete or rename certain files and then, what executable do I run to get the Desktop?
Due to a problem I had with a 10.10 upgrade [URL] and the need to access data on the pc I upgraded, I downloaded the live CD and installed on the same pc. Now I have two versions of 10.10 on the same pc but in different partitions. Is there any way I can copy my settings from the partition that is not working (the upgraded one) to the one that is working?
View 1 Replies View RelatedDirectory names and certain filenames appear in a bold font that gets cut off on the right side of each string of text. This issue only arose after upgrading to 10.04 LTS. I can not figure out why the upgrade would change the terminal font settings in such a way.
View 4 Replies View RelatedI have an existing unix user that some how didnt make it into the copy over to our LDAP server. How do I add an existing unix user to an existing LDAP directory? Will ldapadd work? I was under the impression ldapadd required an ldif file to work properly.
View 7 Replies View RelatedI currently have a Windows XP OS which i want to dual-boot with Ubuntu Linux 10.10 . I put the disk in the drive and chose the option to install Linux through Windows. But it hangs in the middle. I am also unable to change my BIOS settings due to which i can"t change my boot preference. My first Boot is the HDD. I want to change it to CD-ROM. Any suggestion? I also have another PC where i can boot through the CD...I tried installing there by booting from the CD but i get this error message after seeing the purple Linux screen with the loading dots. "(Process:286):Glib warning**:getpwuid:failed due to unknown user id (0)
P.S.- I am not able to see any options while the boot is going on
The Update Manager has tried to upgrade me to version 11 three times now, and fails each time.
First I get a warning, that probably isn't important: "Third party sources disabled
Some third party entries in your sources.list were disabled. You can re-enable them after the upgrade with the 'software-properties' tool or your package manager."
After the upgrade I get this:
"Could not install the upgrades The upgrade has aborted. Your system could be in an unusable state. A recovery will run now (dpkg --configure -a).
Upgrade complete The upgrade has completed but there were errors during the upgrade process."
The console has about six messages similar to this, all complaining about the vnc-e package:
"warning, in file '/var/lib/dpkg/available' near line 10992 package 'vnc-e': error in Version string '4.4.3_r16583': invalid character in version number"
I want to set samba to act as domain controller PDC.Is it possible to create user profil in samba with rights to change network settings but not install software, create users.Something like network admin that is like normal user but he is able change network settings.
View 1 Replies View RelatedI have a windows 7 ultimate host machine, installed oracle virtual box on it. Made a iso image to boot fr fedora. All this is fine when the installation is complete, it asks for reboot. Reboot done. Then I went to terminal. Did a SU - root to get into the root. Then I did a firstboot command to enter information. I created a user for myself and at the end rebooted the virtual box.
When it starts up, it does not show my user. It just shows "Automatic Login" and it logs in as Live System User. Even if I try to switch user then it gave me a authentication failure when I enter the credentials of the user which I created. If I try to create users manually using system administration, the user is lost after reboot. I have tried all possible steps...as instructed on the net.
The title's not especially clear, so I'll post a screenshot of what's happening. The upgrade keeps finding instances of the same kernel; the list in the terminal is constantly scrolling down, finding 'new' instances.
It's been doing this for about half an hour now. BTW, upgrading from 64bit 9.10 to 64bit 10.04.
I downloaded the Fedora respin DVD from [URL]. I burned the image and tried to upgrade my existing RussianFedora 10 distro. However, even after the successful completion of upgrade process, I boot into the same old RussianFedora 10. I would, also, like to mention that the upgrade process seemed to be unusually fast, it took only 15 mins for the complete process!
View 2 Replies View RelatedThe Payment Card Institute (PCI) is requiring our site to upgrade to the latest versions of Apache, Mysql, OpenSSL, and PHP to fix known bugs that can compromise securityI can build all these from source, but when I do "make install" they don't mimic at all what is installed (directory format, files, etc) when I do apt-get install (of whatever old versions are in the dist).How can I find out how the packages are build via configure/make so that I can replicate the files, directory structure, etc, just with the current versions.
View 9 Replies View RelatedI've had such good luck with Fedora (and this Forum), I'm attempting to put F12 on wife's brand new Sony Vaio, a VPCEB11FM, a 64bit system. I downloaded the Fedora-12-x86_64-netinst.iso, made sure it was ok with sha256.exe, then burned the image to DVD. Booted it up and let it default to "install or upgrade an existing system". It dead-ended in a dark blue or black screen. I re-started and examined the other options. Thought I'd try the one that says: "Install system with basic video driver". Got all the way through to where it got ready to start downloading files. Can't get past that point because it attempts to get to the Internet using the Sony's wireless card! Why would it try the wireless when there's a wired NIC card in this PC that requires no special driver etc. How to proceed from here?
View 3 Replies View RelatedHaving read several threads and received excellent previous advice there are just a couple of points I want to check please before proceeding on laptop. I want to upgrade to 11.4 from 11.2. My disk setup is as follows:-
Disk /dev/sda: 120.0 GB, 120034123776 bytes
240 heads, 63 sectors/track, 15505 cylinders
Units = cylinders of 15120 * 512 = 7741440 bytes
Disk identifier: 0x462d462c
[Code]..
If I select existing /home root and swap partitions, format root but prevent formatting of /home and use a different user ID I believe that will leave my existing data intact and will allow me to trial new os. Is this correct approach? If all goes well and when I have new system working correctly, what is best way make old user id date accessible. Can I simply create my old id on new system and will that allow me to access data when I log on with that id?
Second question; at present I have the ability to boot to openSUSE, OS/2 and windoze. (It used to be done entirely by Boot Manager but during my last Linux installation I messed this up a bit so now machine boots to grub and this offers all three operating systems but chain loads Boot Manager if I select OS/2)
When I do the new installation what should I select to retain this setup so that I still have access to windoze and OS/2 but when selecting linux have new 11.4 system run.
I want to upgrade from another distro to ubuntu server for a few reasons. The only problem is I have a lot of data that needs to survive. here is how my computer is setup. I've 5 drives on the computer,
A- 10gb drive for OS and swap only, no data
B,C,D,E - 4x 500 GB drives in a LVM. they make up one large drive with xfs and this volume has about 1.2 TB of data. there is nothing fancy on it, no encryption and no software raid of course the little 10gb drive can be formatted no problem, but the LVM needs to be migrated over intact.
what is the correct way/procedure to re-create a user home directory. For instance, on a Mac/Windows machine, i would just rename the existing user profile [home dir], and then just log back in as the user - job done. On OpenSuse/Linux, it seems it does not work that way..?! When i try to rename my home folder to say me.old via root, and log back in as me, i get all kinds of errors. Opensuse does create a new home dir, but it appears not properly.
View 9 Replies View RelatedI'm looking for the easiest or cleanest way to copy a user's settings to a new user's settings. I don't need to copy any files from the original user, but setting up a home directory would be great.
If it's done at the command line, that would be just fine. I'm very familiar with working at the command line.
I am having ubuntu8.10 and i work with ns-2.34 with gcc-4.3. if i upgrade to ubuntu9.04 will it disturb my ns-2.34 settings.
View 7 Replies View RelatedFrom the GUI, there is an option in the network settings "Automatically obtain DNS information from provider", just wondering how do we set or disable the same option through the command line, which files do we have to modify?
View 2 Replies View Relatedi have a computer with 3 users on it, and a folder using samba that everyone on the network has access to. Lets say that, the folder is stored in /etc/sharedfolder. What happens is, when user1 puts a folder in it, then logs off, user 2 attempts to modify it and fails, because permission is set to 755, and they are not in the same group. (even if they were, it should still need to be 775) Anyway, my current solution is, every 5 minutes a crontab changes permission like so: chmod 777 -R /etc/sharedfiles && chown useradmin:superadmin -R /etc/sharedfiles Which works, but seeing as there is getting close to a gig in there, this is a bad solution, as it eats up the computers resources. Solutions that i think might work:
1) create a script that only changes permissions that need be changed.
2) change file permission settings to force all documents to inherit parent document settings
Im trying to test out Ubuntu while running Windows currently, once i got the ISO image installed into my USB device by following the steps on the Ubunto site, i rebooted my PC and tried to get into BIOS to change the setting to boot through the USB device.
but i was unable to open BIOS.
this is all i saw in the bottom right side of my screen as far as commands to open some thing before my PC would boot through my Cdrive and load Windows.
L> BIOS Setup/Q-flash
When I attempt to create a USB Live Xubuntu setup via the Startup Disk Creator, the settings for the Persistent drive are disabled/gray. When I perform the setup, no extra space is reserved for the persistant drive.
I've used the same USB drive for Live Ubuntu installations in the past and had no problems.
Does the USB Startup Disk Creator work with Xubuntu?
if this is covered elsewhere. Could not find it (could be being blind) If I upgrade fro 9.10 to 10.04 LTS will I lose
1. My Gnome panel settings
2. My compiz fusion settings
and
3. Will EnvyNG still be able to manage m,y Nvidia drivers OK?
I realize there is always a risk with an upgrade but I was just wondering what you all thought the chances were that I may lose these settings.
I was running 10.04 on my Asus EEE PC. Today I upgraded from 10.04 to 10.10, but with lots of regrets. The complete desktop changed. I don't even know how to access the system settings anymore. I just wanted to start up the Twonky Media server from my personal folder again, which resides in my personal user folder, but I cannot find the folder at all! Shame on the Ubuntu team to throw around the user experience so much. The Ubuntu Linux distribution has gone back to a nerdy level, I hoped it had recovered from that. Make-the-user-feel-at-home! Is that so difficult?
Where is my Favorite group, where is my System group, where is my personal Home user folder? I'm sure I can find them on my own, but it's a shame that my user experience has been taken into a rolercoaster. Why make it so difficult on the user Ubuntu, why?
I was going to pull the trigger and do the "natty" upgrade. Before I do I had a few questions. Basically, I changed a few config settings on my ubuntu 10.10 load. I made it so I can connect to it remotely via ssh and open a secure desktop session. I changed some port settings so it doesn't use the traditional ssh 22 port and traditional xrdp port was change also. So, I'm wondering if my "tweaks" will remain intact after the update or if I'll have to go back in and reconfigure those settings? I'm running 10.10 on my PIII 600 with an old ATI Radeon 64 graphics card. I'm quite happy with 10.10 but if I can upgrade to "natty" will little problems I'd like to. Also, my default GUI is xfce. Also, here's my system as shown by lspci:
[Code]....
I'm totally new to Linux. Got a fresh installation of Fedora 10 x86_64 on my HP dv7-1070el notebook with previously installed Vista Ultimate 64bit. I have 2 HDDs. The OS are installed on different hard-disks. The problem: I've chosen to put the boot loader on the first sector [...] on the second HDD (/sdb5) where Fedora is installed, not on MBR /sda1 where is Vista. Now, when I reboot, it goes straight to Vista and I expected to be asked for a boot choice.
What I want is to start using Fedora and to be able to choose which OS I want to use when I start my notebook. I'm not sure I made myself clear since I'm not too familiar with all terms so please correct me so I can learn . This is what I remember from installation. Everything else went great, no installation problems. If there's no way to get the dialog of which OS I want to boot, tell me the command for booting Vista when GRUB starts.
Today I upgraded my 10.10 to 11.04. Since the last step of upgrading, when it was restarted, I get stucked in consola where it is checking, and there is written fail at stopping automatic crash report generation. How can I repair it. I tried to do
sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade
sudo reboot
but it doesn't do it properly.
Next week we will get a new Server for rent with a preinstalled Debian. If we download the Networkinstaller and put it in Grub, it is possible to set some settings with a script or commandline? We need SSH and the Network haves to run. So we have to set up the Networkadress , Gateway and Netmasq. So if the Networkinstaller is booting that we get direcly access with SSH to install CentOS. It is possible?
View 1 Replies View RelatedI have 2 users and I would like to copy all the files and folders in one home dir to another.... sounds simple, til i got started. Ive tried
Code:
sudo cp -nRv /home/user1/* /home/user2
but that didnt copy the .* folders. Im after the firefox and thunderbird folders mainly, but all of them is OK too.
im talking about the .adobe, .amsn ..........
How can I copy the .* folders from one user home folder to another and then give the correct permissions to the new user.
