Ubuntu Installation :: Apt-get Update Lucid-security GPG Error

Jun 11, 2011

I get this error when running apt-get update on Ubuntu 10.04.1 Server. Never got it before today, apt-get update is always error-free, unless there are connection issues.

Quote:

W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: http://security.ubuntu.com lucid-security Release: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key <ftpmaster@ubuntu.com>

W: Failed to fetch [URL]..Some index files failed to download, they have been ignored, or old ones used instead.

View 4 Replies


ADVERTISEMENT

Debian Installation :: Apt-get Update Or Aptitude Update - Error "Cannot Initiate The Connection To Security.debian.org:80"

Jul 14, 2011

I have a very strange problem; when trying to apt-get update or aptitude update I get time out errors. At first it was resolving ipv6 adresses:

Cannot initiate the connection to ftp.litnet.lt:80 (2001:778::87). - connect (101: Network is unreachable) [IP: 2001:778::87 80] Err [URL] Cannot initiate the connection to security.debian.org:80 (2001:a78:5:1:216:35ff:fe7f:6ceb). - connect (101: Network is
unreachable) [IP: 2001:a78:5:1:216:35ff:fe7f:6ceb 80] As my host does not have normal ipv6 support, i just tried to disable ipv6: echo net.ipv6.conf.all.disable_ipv6=1 > /etc/sysctl.d/disableipv6.conf

[Code]....

View 2 Replies View Related

Ubuntu Installation :: 10.04 Lucid Update Manager Fails To Update - Now 64 Days Out Of Date?

Jul 4, 2010

I am trying to update using Update Manager and I get this message: Failed to fetch "Failed to fetch [URL]..404 Not Found" My system is 64 days out of date now.

I have looked elsewhere for an answer and some others have had similar problems, but I have not found a reason for it happening, nor an answer. I wonder if anyone can help me please. I have been using Ubuntu for several months, can use the Terminal if I have the right commands to issue, but beyond that have limited knowledge of the system.

View 9 Replies View Related

Ubuntu :: Lucid Lynx Update Error

Jun 28, 2010

When Ubuntu tries to update I get an error message saying it was unable to synchronize files in the repositories and an older index will be used.

View 2 Replies View Related

Ubuntu :: Lucid Update - Parse Error In File

May 22, 2010

I successfully installed ubuntu but I cant install its updates, heres the prob:
dpkg: parse error, in file '/var/lib/dpkg/available' near line 19410 package 'initscripts': missing version

View 2 Replies View Related

Ubuntu Security :: IPBlock Will Not Update - Error

Apr 22, 2011

I was looking for a similar program to PeerBlock on Windows, as most/some might know it's the project that took over after PeerGaurdian halted. So I have installed IPBlock and was having issues with updating the lists so i removed them, re-added them and still cannot. I can't import lists from URL's either without getting the same error. Kinda seeming like a waste of time right now...

Code:

ipblock[7147]:error:update of badpeers.gz failed
ipblock[7147]:error:update of level1.gz failed
ipblock[7147]:error:update of level2.gz failed
ipblock[7147]:error:update of Primary failed

View 3 Replies View Related

Ubuntu :: Error Installing A Security Update

Jan 27, 2010

Long time lurker, first time posting. i've been using ubuntu for the last 2 years, since my vista went kapoft, mainly for browsing/word editing. Never had any problem until this morning.Any ideas? should i do a clean reinstall, like a good windows user, or maybe upgrade to 9.10 and hope this error go away, or even completely ignore this package and go on with my life?

View 2 Replies View Related

Ubuntu Installation :: 2.6.32-22 Kernel Update - Anything New For Lucid?

May 5, 2010

I have just run an upgrade and noticed Kernel update 2.6.32-22 for lucid. Anything new in that? Anyone have any details?

View 9 Replies View Related

Ubuntu Installation :: Lucid 10.04 Will Not Update Fully

May 13, 2010

When I click on "update" after running a series of updates, I get an error message that says:
"Failed to fetch [URL] 404 Not Found [IP: 91.189.88.45 80]. Some index files failed to download, they have been ignored, or old ones used instead."
Yet if I go the address in Firefox, one step at a time from [URL] and continue one step at a time, there is indeed a Packages.gz that I can download, so what is wrong? I do not see that repository listed in sources.list or in the update manager.

View 9 Replies View Related

Ubuntu Installation :: Synaptic Update Failure-lucid 10.04

Jun 9, 2011

When I try to update my system(10.04 Lucid) it gives me this error message.

Could not initialize the package information

An unresolvable problem occurred while initializing the package information.

Please report this bug against the 'update-manager' package and include the following error message: 'E:Encountered a section with no Package: header, Problem with MergeList /var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_karmic_main_binary-i386_Packages, E:The package lists or status file could not be parsed or opened.'

View 2 Replies View Related

Ubuntu Installation :: Lucid NVIDIA Driver Update Fail

May 5, 2010

I've been running Lucid since it dropped. Decided to upgrade my NVIDIA 6600gt graphics card to the newest driver I found at the website. Installation went flawless. But after reboot, I got this:

Ubuntu is running in low-graphics mode

The following error was encountered. You may need to update your configuration to solve this.

(EE) May 05 12:24:17 NVIDIA(0): Failed to initialize the NVIDIA
kernel module. Please see the
(EE) May 05 12:24:17 NVIDiA(0): system's kernel log for

[Code]....

View 9 Replies View Related

Installation :: Can I Update Ubuntu Karmic To Lucid With Desktop CD Rather Than Alternate

May 9, 2010

Well the title says it all.. i don't want to lose all of my settings with a fresh install and I only have the desktop CD, so can you do the upgrade with it?

View 2 Replies View Related

Ubuntu Installation :: Update Manager Segfaults When Trying To Upgrade To Lucid

Jun 12, 2010

I'm trying to upgrade Karmic to Lucid. I open the update manager, click the "upgrade" button, and then again the "upgrade" button in the window that pops up. Then it just closes down. When running the update manager from a terminal, the only output is "Segmentaion fault".

View 2 Replies View Related

Ubuntu Installation :: Firefox Wants To Download Php Files After Update To Lucid Server

May 7, 2010

I updated from karmic to lucid server edition and now firefox wants to download some php files. index.php which is in the same directory is apparently correctly parsed.

Google chrome tells me that the site may be temporarily down and Opera informs me that the connection has been closed by the remote server.

Under karmic I had a standard lamp server installed and everything worked fine.

This is the first time I post in a forum and I hope this is fine here.

I just moved the scripts from the server to a local machine which I updated a couple of weeks ago to lucid.

View 4 Replies View Related

Ubuntu Installation :: Locked /home Folder After Failed Update To Lucid?

May 10, 2010

After a powerdown during my upgrade of Ubuntu 9.10 to Ubuntu 10.04 that rendered my operating system useless I can get to my /home folder. The /home folder is locked and can not be copied or read. This means I can't reinstall my stuff and keep my files. The rest of my data (except for the /root folder) seams to be unlocked. How can I get to my /home folder? Does anyone know how to unlock it?

View 2 Replies View Related

Ubuntu Installation :: Error Doing Partial Update Through Update Manager?

Oct 1, 2010

I am using ubuntu 9.10.While running a partial update through System->adminstration->update-manager. I am facing error as 'Error Authenticating some packages". Please find the attached, screenshot of the error and sources.list file output.

View 1 Replies View Related

Ubuntu Installation :: Update Manager No Longer Works Post Upgrade To Lucid

May 28, 2010

When I run update manager, it gives me an error message saying:

Code:

This can be caused by:
* A previous update which didn't complete
* Problems with some of the installed software
* Unofficial software packages not provided by Ubuntu
* Normal changes of a pre-release version of Ubuntu
if I click partial upgrade, it looks like it did during the upgrade, then says:

Code:

There are no upgrades available for your system. The upgrade will now be canceled.
if I click close from the first "not all updates can be installed" dialog, it says:

Code:

It is impossible to install or remove any software. Please use the package manager "Synaptic" or run "sudo apt-get install -f" in a terminal to fix this issue at first.
running the suggested line gives the following output:

Code:

In Synaptic, fixing broken packages does nothing. Mark All Updates > Apply seems to work, but I'd still like to figure out why Update Manager does not?

View 7 Replies View Related

Ubuntu Installation :: Package Manager Won't Update Source List Pmcenery-ppa-lucid?

May 4, 2011

I recently got an iPhone 3g and have been trying to upload music onto my device with Rhythmbox because my computer exclusively runs Ubuntu (10.04 LTS, Lucid Lynx). Rhythmbox would show files that were dragged and dropped as being on the iPhone, and they appeared in the iPhone's folders, but they weren't recognized in the iPod player. I followed a variety of forum threads to try to fix the problem, but ended up creating a whole new set of problems with my package manager.

I get this error message before package manager opens: E: Type 'n' is not known on line 2 in source list /etc/apt/sources.list.d/pmcenery-ppa-lucid.list E: The list of sources could not be read. Go to the repository dialog to correct the problem. E: _cache->open() failed, please report.

And this message after I close the first error message window and the package manager opens: An unresolvable problem occurred while initializing the package information. report this bug against the 'update-manager' package and include the following error message:

'E:Type 'n' is not known on line 2 in source list /etc/apt/sources.list.d/pmcenery-ppa-lucid.list, E:The list of sources could not be read.' Does anyone have any recommendations on how to fix this? If it isn't already apparent, I am very inexperienced working with ubuntu, so the more detailed the response, the better.

View 9 Replies View Related

Ubuntu Installation :: Update / Getting An Error About A Kernel Update?

Sep 1, 2011

(after i update packages, it says error, and here's whats in the details tab)
Preconfiguring packages ...
(Reading database ... 197969 files and directories currently installed.)
Preparing to replace flashplugin-installer 10.3.181.34ubuntu0.11.04.1 (using .../flashplugin-installer_10.3.181.34ubuntu0.11.04.1_i386.deb) ...
code....

How to fix This? i haven't messed with Ubuntu much...Why am i getting an error about a kernel update?

View 4 Replies View Related

Ubuntu Installation :: Lucid: Restoring Grub2 (dual Boot) - Error "error File Not Found Grub Rescue"

Apr 30, 2010

After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.

[Code]...

View 9 Replies View Related

Ubuntu Installation :: Upgrade To Lucid From Karmic, Update Manager Starts And Shows System Is Up-to Date?

Apr 23, 2010

when i am tryg to upgrade to lucid from karmic, update manager starts and shows my system is up-to date. command used "update-manager -d"os karmic 64bit.

View 2 Replies View Related

Ubuntu Installation :: Upgrading From Karmic To Lucid - Error

Jun 18, 2010

Error during commit 'E:Internal Error, Could not perform immediate configuration (2) on mountall' Restoring original system state

Yeah...that's what I get every time I try to upgrade to lucid lynx.

NOTE: I haven't updated for quite some time. I may have gotten one or two updates for karmic but that was it. Just thought it might be important....

NOTE: Also not sure if this is important, but karmic installed and did some funny stuff to itself. My desktop no longer exists. It just isn't there. Also, when I try to turn of my computer it gets all kinds of errors and eventually I have to just pull the plug....something about a dev loop0 right after is says its deactivating swap...

View 9 Replies View Related

Ubuntu Installation :: Error Installing Bugzilla Lucid?

Aug 13, 2010

When I iried to install bugzilla on my Ubuntu Lucid, I kept getting the following message. I have used "sudo apt-get --configure -a " and this is as far as I can get with the installation. Is there a way of first stopping the process and then removing Bugzilla, as it has locked the admin for apt.

Setting up bugzilla3 (3.2.5.1-2) ...
dbconfig-common: writing config to /etc/dbconfig-common/bugzilla3.conf
granting access to database bugzilla3 for bugzilla3@localhost: already exists.
creating database bugzilla3: already exists.
dbconfig-common: flushing administrative password

[Code].....

View 2 Replies View Related

Ubuntu Installation :: Error Upgrade Offline Lucid To Maverick?

Feb 26, 2011

An unresolvable problem occurred while calculating the upgrade:E:ErrorpkgProblemResolver::Resolve generated breaks, this may be caused byheld packages.This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.

View 1 Replies View Related

Ubuntu Installation :: Lucid Upgrade - Can't Access Huey - Dispcal Error

May 1, 2010

Upgraded a 9.10 installation to 10.04 and now, on trying to execute Dispcal I get

dispcal: Error - new_disprd() failed with 'Instrument Access Failed'

The lights on the Huey flash as if calibration is about to start, but then I get the error. The Huey is connected as it always has been, via a USB hub. No change there. I have also re-installed the Argyll package. A disconnect and reconnect of the Huey prompts this.

[code]...

View 1 Replies View Related

Ubuntu Installation :: Lucid - Multiple Active Partitions Error At Startup?

Aug 4, 2010

I created a customized Lucid image and installed on my computer which has 1 hard drive (/dev/sda)When I booted up .. it gave me an error indicating "Multiple active partitions" ... and did not boot up ...

I used my live CD and run as live session to check on the hard drive, When I issued the command fdisk -l on an terminal , the out put indicated that only /dev/sda1 is bootable, and other /dev/sda* were not bootable ...

I am not sure why I got the "Multiple active partitions" message at boot up time ..

View 3 Replies View Related

Fedora Installation :: Update Error At Yum - Error Cannot Load Module

Jul 28, 2011

After 2 months away from Fedora i am using it again, and used yum update to update stuff, everything was running fine, downloaded stuff, but 2 of the 666 stuff to install got error, here is:

[code]...

View 8 Replies View Related

Ubuntu Installation :: Update 10.10 - Error "unable To Update Because There Is More Than One Synaptic Manager Running"

Mar 13, 2011

after initating the update and i enter my pass word, update stops and an error box comes up stating that it is unable to update because there is more than one synaptic manager running, i have restarted and get the same results, and to my knowledge there is nothing else running in the background.

View 3 Replies View Related

Ubuntu Installation :: Re-installed Lucid, Got Error: File Not Found And Grub Rescue Prompt?

May 13, 2011

Short story: upgraded to Natty, slowed graphics, re-installed Lucid, got Error: file not found and grub rescue prompt

Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================

[code]....

View 1 Replies View Related

Fedora Installation :: Computer Won't Boot After Security Update

Jul 21, 2010

Just finished a security update, (Fedora 12) and it said I had to restart the computer to have it take effect. When I restarted, all I got was the "Compaq" logo....forever. No Grub2 (it's a three system set up), no bios, just the brand name of the box. Even worse, when I tried going at it with a live cd, the same thing; the bios never loads, so no live cd fix.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved