Long time lurker, first time posting. i've been using ubuntu for the last 2 years, since my vista went kapoft, mainly for browsing/word editing. Never had any problem until this morning.Any ideas? should i do a clean reinstall, like a good windows user, or maybe upgrade to 9.10 and hope this error go away, or even completely ignore this package and go on with my life?
View 2 RepliesI was looking for a similar program to PeerBlock on Windows, as most/some might know it's the project that took over after PeerGaurdian halted. So I have installed IPBlock and was having issues with updating the lists so i removed them, re-added them and still cannot. I can't import lists from URL's either without getting the same error. Kinda seeming like a waste of time right now...
Code:
ipblock[7147]:error:update of badpeers.gz failed
ipblock[7147]:error:update of level1.gz failed
ipblock[7147]:error:update of level2.gz failed
ipblock[7147]:error:update of Primary failed
I get this error when running apt-get update on Ubuntu 10.04.1 Server. Never got it before today, apt-get update is always error-free, unless there are connection issues.
Quote:
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: http://security.ubuntu.com lucid-security Release: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key <ftpmaster@ubuntu.com>
W: Failed to fetch [URL]..Some index files failed to download, they have been ignored, or old ones used instead.
im receiving this error after update or when im installing new software i upload the screenshot
View 9 Replies View RelatedI have a very strange problem; when trying to apt-get update or aptitude update I get time out errors. At first it was resolving ipv6 adresses:
Cannot initiate the connection to ftp.litnet.lt:80 (2001:778::87). - connect (101: Network is unreachable) [IP: 2001:778::87 80] Err [URL] Cannot initiate the connection to security.debian.org:80 (2001:a78:5:1:216:35ff:fe7f:6ceb). - connect (101: Network is
unreachable) [IP: 2001:a78:5:1:216:35ff:fe7f:6ceb 80] As my host does not have normal ipv6 support, i just tried to disable ipv6: echo net.ipv6.conf.all.disable_ipv6=1 > /etc/sysctl.d/disableipv6.conf
[Code]....
I had a working ubuntu 10.10 system two days ago with kernel 2.6.35-24. I have a gtx 460 card so I have the driver from Jockey/Additional Drivers installed.
Two days ago update manager prompted me to install 2.6.35-25. I've never had problems updating kernels so I did. I Rebooted my machine and gdm/gnome no longer starts. I always get stuck on the tty1 screen. I did some troubleshooting and figured out that my current NVidia drivers seems to be messing it up. So I booted into my older kernel (2.6.35-24) and removed my NVidia driver.
I used these steps to switch from nvidia to nouveau:
NvidiaDriverSwitching
I can now boot into my latest kernel (2.6.35-25) but now I'm having problems trying to reinstall the nvidia drivers.
jockey sometimes doesn't list any available drivers. and when it does, it gives me an "System InstallArchive() error" when trying to install.
I tried installing nvidia-current via apt-get and I get these errors:
Code:
Setting up nvidia-current (260.19.06-0ubuntu1) ...
Removing old nvidia-current-260.19.06 DKMS files...
dkms.conf: Error! No 'DEST_MODULE_LOCATION' directive specified.
dkms.conf: Error! No 'PACKAGE_NAME' directive specified.
dkms.conf: Error! No 'PACKAGE_VERSION' directive specified.
I just installed Ubuntu on a desktop. Can anyone give me some guidance on installing basic security software? In particular, I'm looking for a firewall, antivirus, and anti-spyware/malware utilities.
View 2 Replies View RelatedI'm concerned about security of having a LAMP server on my laptop as having any server makes the system less secure. However, if I were to create a new partition and install a lamp server on that and only use it when offline, would the security of my main partition be affected at all?
View 3 Replies View Relatedi updated both browsers i have and lost my secure log-in pages (no padlocks showing ) concerning different Web mail accounts.Just before i did these updates i checked an unrelated thing on-line regarding my sound card of which i kept a copy of and got this message below :
!!ALSA/HDA dmesg
!!------------------
[ 12.762633] cfg80211: Calling CRDA for country: AM
[code]....
With an Ubuntu 10.10 upgraded from 10.04, under Software Sources, Updates, there is a radio button marked "Install security updates without confirmation." I have this radio button marked, but still get "Important security updates" almost daily in my update manager. I don't remember this feature actually ever working.
View 9 Replies View RelatedI am from India, and I tried to update my Ubuntu system today. Code: $sudo apt-get update The update failed because the connection to the India mirror timed out: Code: [URL] Could not connect to in.archive.ubuntu.com:80 (111.91.91.37). - connect (110: Connection timed out) I tried the update a few times, with the same result every time.
I had firestarter running at this time, and noticed that I would get new security events every time I tried an update. I checked the events list, and it turned out that the machine at the ip address 111.91.91.37 (the in.archive.ubuntu.com machine, to go by the above error message) had been trying to make connections to seemingly random ports on the machine every time I tried the update: see the attached screenshot. I then changed my repositories to the Main Server using Synaptic, and tried the update again (from the command-line). This time it worked without a hitch, and firestarter did not report any unwanted incoming connection. why is the India mirror trying to open connections that the Main server apparently does not need in order for me to do the update? Should I (we) be concerned?
I was running 10.04 LTS and had decided to stick to the LTS versions as I'm now running my machine as a server and don't want to be updating regularly.Every time I logged in via SSH I got a message telling me there where packages to update including a security update. So I did a search to find out how to perform an update on Ubuntu server from the command line.What I found was to do this:sudo apt-get updatesudo apt-get dist-upgradeAfter doing that I rebooted but now my machine gives me this message:
init: ureadahead-other main process (794) terminated with status 4Your disk drives are being checked for errors, this may take some timePress C to cancel all checks currently inprogressI'm not pressing C yet and leaving it alone to finish, but I noticed when the machine booted that one of the options for booting talked about Ubuntu 10.10, so I'm worried that I've updated from 10.04 LTS to 10.10 by accident?
Libnss3-1d
xulrunner-1.9.1
xulrunner-1.9.1-gnome support
After click on install updates and entering password, a message says "Some of the packages could not be retrieved from the server(s). Do you want to continue, ignoring these packages? Yes/No.
If I answer No, this message appears:
W: Failed to fetch http://security.ubuntu.com/ubuntu/po....10.1_i386.deb
404 Not Found [IP: 91.189.88.31 80]
If Yes, it tries to download but immediately:
W: Failed to fetch http://security.ubuntu.com/ubuntu/po....10.1_i386.deb
404 Not Found [IP: 91.189.88.31 80]
It has always installed the updates with no problems, until these 3 updates remain in pending installation status.
As the title says i updated my system which then needed a reboot. I also installed Mixxx djing software to try it out. So i thought id just restart the system. Usually when i boot into my desktop wireless automatically can connect to my router but not this time, wired only for now... i know theres tons of wireless issue threads but some more experienced users will be able to get straight to the point and run through some diagnostics with me.
View 1 Replies View RelatedJust got a sudo update from the update manager-does anyone know what this specific update does?
View 4 Replies View RelatedJust got a message about critical security holes for phpmyadmin (see e.g. [URL]) and wondering, when I'd get an update for my ubuntu server Lucid Lynx 10.04.3?
Currently installed version is 4:3.3.2-1, published on 2010-04-16.
How can I make the security applet stop showing an update for firefox 3.5.9? I have a more recent version installed from mozilla repo: firefox 3.6. The mozilla repo already has a higher priority (95 instead of 99), so I don't know what to do.
View 5 Replies View RelatedIf I have a hard-disk with Ubuntu fully installed on it and I want to - all of a sudden - use Windows XP, is it mandatory that I firstly format the hard-disk first? So far, I have used two versions of Windows XP; one of them is from a few years before the other. Both copies of Windows XP when in start-up from booting from CD are causing errors. One of them is a BSOD error (0x0000007B) and the next Windows CD is stopping and giving me an error with setupdd.sys (error code 4). Is it required that the hard-disk is formatted before you even put a Windows boot CD in?
View 2 Replies View RelatedI am using ubuntu 9.10.While running a partial update through System->adminstration->update-manager. I am facing error as 'Error Authenticating some packages". Please find the attached, screenshot of the error and sources.list file output.
View 1 Replies View RelatedI was reading that Arch does not provide security updates, but just provides security by keeping with up-to-date software...So what is in a security update and what does it patch? The kernel?
View 10 Replies View Related(after i update packages, it says error, and here's whats in the details tab)
Preconfiguring packages ...
(Reading database ... 197969 files and directories currently installed.)
Preparing to replace flashplugin-installer 10.3.181.34ubuntu0.11.04.1 (using .../flashplugin-installer_10.3.181.34ubuntu0.11.04.1_i386.deb) ...
code....
How to fix This? i haven't messed with Ubuntu much...Why am i getting an error about a kernel update?
On two Centos5 servers, yum gives a segmentation fault error when trying 'yum update' or 'yum check-update' after running 'yum clean' :
[Code]....
The error is the same for the other computer except while attempting to update the rpmforge repository. Nothing has really changed on the servers in some time and 'yum update' worked fine on each yesterday and I have no idea why they would both suddenly fail!
For the past few days, the automatic GUI update has been crashing, complaining of a "Transaction error."
Here is the output that pops up in a separate window:
Code:
I tried the following:
Code:
And got the following (similar) output:
Code:
I very rarely use xfce and I don't quite know what exo is, but I'd like to fix this problem if it's not too involved.
Code:could not add package update for poppler-data-0.4.0-1.fc12(noarch)updates: poppler-data-0.4.0-1.fc12.noarch.
View 3 Replies View RelatedI have a error when i want to update my system via YUMI execute the next command.sh@ yum -y updateYou could try using --skip-broken to work around the problemYou could try running:package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigestThe program package-cleanup is found in the yum-utils package.
View 5 Replies View RelatedI was trying to installed skype and i am getting a error that reads: Error: Wrong architecture 'i386' has any one installed skype before?
View 3 Replies View RelatedWhen I try to do
[code]...
I've tried the method described here: [URL]... However, I'm still getting the same error.
I receive these messages after I enter my user_id and password in Ubuntu 9.04;
"An error occured while loading or saving configuration information for update notifier. Some of your configuration settings may not work properly." then clicking on details box this can be seen;- {Failed to connect configuration server; some possible causes are that you need to enable TCP/IP networking for ORBIT, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to gconf daemon: Message did not receive a reply (timeout by message bus))}
then there's another error message;
"An error occured while loading or saving configuration information for evolution-alarm-notify. Some of your configuration settings may not work properly." then clicking on details box this can be seen;- {Failed to connect configuration server; some possible causes are that you need to enable TCP/IP networking for ORBIT, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to gconf daemon: Message did not receive a reply (timeout by message bus))}
after clicking Ok. the desktop is just blank.
everytime i try to install the updates from the update manager i get this error message:
E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, i have tried running the sudo dpkg --configure -a in the terminal but when it asks for the password the keyboard stops working so i cant type anything into the terminal. can anyone help me fix this? My other problem was when i try to run the Add/Remove Applications i can't ever install any of the software because it says its "waiting for other tasks" i'm not sure why its doing this either.
I have wordpress server running on my machine and I have SELinux enabled for enforcing/targeted. I am unable to insert images, music, etc from the add new post field on the wordpress dashboard. I receive the following error:
image.jpg has failed to upload due to an error The uploaded file could not be moved to /var/www/html/wordpress/wp-content/uploads/2010/10. When I disable SELinux completely, it works fine. Does anyone know what Boolean I need to check to resolve this issue?