after initating the update and i enter my pass word, update stops and an error box comes up stating that it is unable to update because there is more than one synaptic manager running, i have restarted and get the same results, and to my knowledge there is nothing else running in the background.
View 3 RepliesEver time I try to use Update Manager or Synaptic Package Manager I get this Error Message:
I have been wondering if I just need to do a fresh install. Am currently using 9.10 on a Compaq laptop which is prone to overheating and "freezing", usually within 2 hours. Maybe time to install 10.04?
I get an error when trying to run update manager or Synaptic - same thing from Ubuntu Tweak as well. I also tried to update via terminal
[code]...
E: Type 'nchpad.net/ubuntu-wine/ppa/ubuntu' is not known on line 1 in source list /etc/apt/sources.list.d/ubuntu-wine-ppa-maverick.list E: The list of sources could not be read. The above is the console output when i type sudo apt-get update Update manager throws the same error so now I can't install or update software .
View 2 Replies View RelatedIt started with Update Manager constantly recycling and not updating. When it starts it shows 295 files and 308MB waiting to download. When I click on 'Install Updates' it appears to go through the process, and then presents me with the same 'waiting to install' window again - and again, and again - in fact as many times as I care to click the 'Install Updates' button. No error messages appear. The 'Settings' button produces the same apparent process as the 'Install Updates' button, but doesn't present me with any other screen.
I've tried all the solutions I could find on these forums and nothing works. The sudo suggestions for Terminal usually produce error codes. adjusting a line in the 'hosts' file. When I tried this I was presented with the obstacle of not having access to the read-only file, and no matter how much I searched I couldn't find how to gain access . While investigating all these possible solutions, I was directed in turn to the Software Sources and Synaptic Package Manager applications, but when I attempted to start them, 'Starting Administrative Application' appeared briefly on the taskbar - and then disappeared!
every time i try to update my computer i get this message administrator@desktop:~$ sudo aptitude upgrade W: The "upgrade" command is deprecated; use "safe-upgrade" instead. Reading package lists.Done Building dependency tree Reading state information. Done Reading extended state information Initializing package states.. No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 0B will be used.
[Code]...
Since upgrading to Natty I have a very annoying issue and since I am unable to resolveWhenever I start the synaptics package manager I get the following message:An error occurred:E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report.Once I run sudo dpkg --configure -a from the terminal this is what I get:Setting up xulrunner-1.9.1 (1.9.1.18~hg20110309r27352+nobinonly-0ubuntu1~umd1) ...No further progress the machine hangs indefinitely on this, need to kill terminal to exit. Even hours waiting does not show any progress.
View 5 Replies View RelatedIs it possible to get them to show the same result.
update-manager says I need 315 files @ 302mb to download synaptic says 315 @ 318mb (using "mark all upgrades" button, then going the summary via the apply button )
this is on a machine with a clean install of maverick without anything new installed/changed from the defaults. Are these the same 315 packages and is it just a discrepancy in the way they calculate the size?
I used "sudo apt-get dist-upgrade -s --print-uris > upgrade.txt" to get me the same 315 packages, but unfortunately it seems the simulation switch (-s) stops it from actually printing the uris (which would include the size info) so no help in trying to establish where/what the discrepancy is.
This is just the 1st step in me understanding the whole process so I can do what I outline in my long rambling post [URL]
I am using ubuntu 9.10.While running a partial update through System->adminstration->update-manager. I am facing error as 'Error Authenticating some packages". Please find the attached, screenshot of the error and sources.list file output.
View 1 Replies View RelatedI got the following error window (screenshot attached) while running Update Manager. What does it mean?
View 1 Replies View Relatedwhen i try to access synaptic package manager and update manager or ububtu software center. the screen will flash and be gone
View 7 Replies View RelatedSoftware center, update manager, Synaptic package manager crashes for no reason. I have not done any recent changes or downloads. I'm running a fresh install of ubuntu 11.04
5 gigs of ram
Intel dual core
35 SSD
Ubuntu 10.04 64 bit I have not been able to update using the update manager or by using the package manager. It seems when the update manager tries to download all the requests fail.Anyone else had this problem??
View 1 Replies View Relatedwhen i try to access synaptic package manager and update manager or ububtu software center. the screen will flash and be gone.
View 5 Replies View Relatedmessage when attempted updating manager E:Encountered a section with no Package: header, Eroblem with MergeList [URL].. E:The package lists or status file could not be parsed or opened.' Before that happened upgraded Opera and have tried to uninstall but synaptic manager does not respond.
View 1 Replies View RelatedI've just installed ubuntu 10.04 and see that there are a two type installation software? why there are two things? What are the benefits of these two? What are the Difference Between Synaptic Package Manager and Update Manager?
View 1 Replies View RelatedI've been running Xubuntu for almost a year, and haven't had any problems with it up till last week, when Update Manager said it couldn't install a lib package. Several days later, I saw the update notif saying that there were 12 available updates, so I went to install them, and it wouldn't install any of them. Now, if I try to start Update or Synaptic in any way, they'll open for about five seconds and then close.
View 7 Replies View RelatedWhile running the update manager my system froze and all that I knew to do was power down and power up again. When I first started the update said 18.5 MB and on restart it said 17.x MB. I restarted the update manager and it failed with errors.
The last message says "E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover:" but no progress in 1/2 hour. If I try to copy the messages to the clipboard it says that cntl-c will abort the operation so I haven't done that. From the top of the "Details" there are about eight "Invalid archive signature" messages. I don't know how to proceed.
I just had a power cut whilst installing updates on my laptop (which dosen't have a battery)
When i try to use update manager or synaptic now i get this message:
When i do sudo dpkg --configure -a this is what i get:
synaptic tells me: "you must manually run sudo dpkg configure -a to correct the problem"
update manager tells me the same thing but also that the software index is broken. And it offered a partial upgrade but it doesnt work or do anything just gets me the aformentioned error message.
I think this was all cause by me interrupting the last update process by pressing cancel, because it froze or something.
I was running the Update Manager when my system froze due to the failure of Karmic to support motherboards using the Intel 845 chipset.
Although the update did not complete when I rebooted and invoked Update Manager it reported that the system was up to date. How do I reset the system so that I can install the updates?
I'm a little bit stuck and in need of advice from people who know what they're talking about. I've had Ubuntu on my office PC, home PC and laptop for about a year now and never had a problem that I couldn't solve, until now. I'd not turned my laptop (Lenovo N 500 with Ubuntu 9.10 64 Bit using GRUB2) on for about a month so when I did on Monday of this week I noticed that I'd not updated Ubuntu for 27 days, so ran the update manager. After everything was updated I carried on using it as normal but when I tried to turn it on yesterday I get the following issue...
GRUB loads and gives me all the possible boot options. Whatever one I choose, I get the same results. It starts to boot (I see the black screen with the white Ubuntu logo) but this remains on the screen for a very long time, then it goes to a flashing cursor at the top left of the screen and it just sits there indefinitely.
I've tried playing with Super GRUB Disc but admittedly I'm not too sure what I'm doing with it. I've tried using the Ubuntu Installation disc as a Live CD too but with no joy. The main HDD appears fine when in Live CD mode, all my files are there etc.. Is this actually a GRUB issue or something else? It's like GRUB's doing its bit and then it's failing slightly further down the line.
I'm totally out of my depth here and really don't want to have to reinstall everything, I'm sure there's a simply solution.
I am not able to update at all. Update manager returned an error reading
Preconfiguring packages ...
/usr/bin/dpkg: 1: Syntax error: ")" unexpected
E: Sub-process /usr/bin/dpkg returned an error code (2)
i get the same error if i update in a terminal or from Synaptic Package Manager.
I got this error message today when i ran sudo update
E: Type 'See' is not known on line 2 in source list /etc/apt/sources.list
E: Type 'n' is not known on line 2 in source list /etc/apt/sources.list.d/ubuntu-wine-ppa-karmic.list
and i cant burn dvd with brasero also my sis760 doesnt work on this
im trying to switch back to windows but i need to copy the image to a dvd
but brasero doesnt work and when ever i use the software center i see nothing under the categories
When i try to update via update manager it says either "failed" or "hit". It done this on my iMac recently so i took it off there. I've had ubuntu on this laptop many times (Dell xps m1530) and its been fine. I cant even install anything from the repositories. When i try to update via terminal it gets stuck on "gb.archive.ubuntu.com lucid release.gpg" and all the other ones after it.
View 3 Replies View RelatedWhen I tried to upgrade (update) current packages list in my synaptic I got error messages about unresolved gpg keys as following:
Code:
How I can get all missed keys for completing update process?
On two Centos5 servers, yum gives a segmentation fault error when trying 'yum update' or 'yum check-update' after running 'yum clean' :
[Code]....
The error is the same for the other computer except while attempting to update the rpmforge repository. Nothing has really changed on the servers in some time and 'yum update' worked fine on each yesterday and I have no idea why they would both suddenly fail!
this happened to me before, where when I try to open Software Center, Synaptic package manager, or update manager, it would freeze with the window open and I would have to force it to shut down. I decided to re-install the OS after this happened and I just updated ubuntu and it is happening again.
View 9 Replies View RelatedWhen I try to open Synaptic Package Manager and update-manager it gives me the following error message:
'E:Type 'n' is not known on line 2 in source list /etc/apt/sources.list.d/banshee-team-ppa-maverick.list, E:The list of sources could not be read.'
How to solve this error because my system cannot update or install any new application.
I upgraded an older system from jaunty 9.04 to karmic 9.10/ Following the upgrade, and about six hours of stable use, I ran the synaptic package manager, to pull in fvwm-crystal and a couple of other nits. Synaptic went into its usual tiring Rebuild Index while the resource hog update-apt-xapian ran away gleefully with the cpu pegged. for longer than I've ever seen it... about 15 minutes, and then the system crashed. and, I mean it crashed hard. I have not seen linux do this in years. Not just a seg fault, the whole machine just crashed (cpu, display, keyboard, the works). Restart and no problem, until I ran Synaptic (Rebuild Index. several minutes, crash).I played this game for a while; thinking the system might just might be overheating... let it cool down, and retried.same result. I tried running one last time, and this time pressed the reload (on Synaptic main panel) prior to the crash.it pulled in the repository updates and completed the Rebuild Index. (no crash)
I have run Synaptic several times since that. downloaded some goodies, and have had no further crashes (although, it does run Rebuild Index every time I start it.and update-apt-xapian pegs the cpu while this is going on. The question(s) I have are:
1) I was not aware that an apt these days can bring down the kernel (no panic, no logging, just down....) How is update-apt-xapian tied into the kernel that permits this vulnerability?
2) There appears (from searches) to be a problem with Synaptic or at least with xapian...?? What is going on with this resource pig..?
3) If I disable xapian and use sudo apt-get instead, instead of Synaptic, does this solve this resource problem?
4) Is there another forum area where this might be addressed besides general?