I recently made the move from windows to Linux and I am happy to having got rid off all the MS stuff. Trying out a few distros I decided on using Ubuntu and Mandriva (wife likes the flashier stuff, what can I say ).
My question is how can I partition my hard disk in such a way that my /home is separate from both the Ubuntu and Mandriva part but accessed by both as my default home folder.
Does anyone have any experience installing Mandriva to a dedicated partition, and configuring it for use with Grub2?
View 9 Replies View Relatedhow much disk space a non manual dual boot uses? I've always been guided by a person knowing much about linux when doing my dual boot (and been guided to do the partitions manualy), but this person is not there for the moment and I need to do a dual boot on my son's computer. Since he'll need his Windows computer mainly for games I wouldn't want Ubuntu to take 2/3 of his disk space (which is about 250 Gb I think, let's say 50 Gb would be perfect for the Ubuntu)
And I'm not sure how I could change this later, cause in my own computer I cannot find how to resize (I cannot unmount neither resize the partitions I have) I don't mean I need to do this on my computer but I mean I wouldn't want to try out anything if I'm not sure it be could restored in 1,2,3. And partitions is such a thing. If I remember correctly I've done dual boot by default (i mean without doing the partitions manualy) and it does about 50/50 ?
I have Ubuntu 10.04. I used a Gparted live cd to partition it and installed Mandriva spring 2010 in unallocated space. It works fine but I can't get back to Ubuntu. How do I do it?
View 5 Replies View RelatedI want to dual boot windows xp and mandriva. I have mandriva on my asus eeepc 1101ha now, and there is a spare partition. I have a windows iso(dont worry i have the real product key, i just deleted the recovery partition and cant reinstall windows from that). I cant buy an external cd drive right now, so my only option is to boot from usb. How do i make the iso bootable from usb?
View 5 Replies View RelatedI have used ubuntu for som years now, I thought It could be nice to try a kde focused linux distro, so I installed mandriva spring.
The problem is that only the ubuntu LTS boots, and the mandriva part just stops after (and I don't know where to start, and what is relevant to write)
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code:
Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
I am quite experienced user of Ubuntu desktop / server distributions. Recently my desktop 9.10 disk failed and I decided to reinstall using 10.04. My configuration is a dual disk dual bot system. I have XP Pro SP3 on one disk and Ubuntu 10.04 on second. XP has own, untached MBR ubuntu got Grub 2 installed on the same disk as Ubuntu. Ubuntu disk is booting first in BIOS. Grub 2 detected both system, however I can boot only to Ubuntu. When I am trying to boot XP I got black screen only. Looks like booting is stack in BIOS stage, because crt+alt+del reset system.
I read Ubuntu forum, search Google and did not come with any solutions. My XP MBR is OK. I can boot directly, choosing XP HDD in BIOS as a starting disk. All entries in grub.cfg looks fine to me. I made 3 different clear installations of Ubuntu. Each with the same result. I reinstaled Grub2 with no effect. I wonder if this may be a hardware/Grub 2 compatibility issue. I am using quite old components.My motherboard is Assus P4C800 Delux. I have 5 HDDs 2 CD. Exactly the same configuration was OK with 9.10/XP dual disk dual boot using Grub legacy.
[Code]...
I have been having problems hibernating my windows 7 partition recently. It happened approximately right after I set up the dual boot.
I have found other topics where it says to make sure that the windows 7 partition is marked as the active partition. I have since done so and it has not changed anything. I did it with Partition Magic on Windows. I did find it suspicious though that my Dell Recovery partition is labeled as boot while the Windows one is marked as Active and System.
However when I looked at it using disk utility in Ubuntu the windows 7 partition is marked as Bootable while the recovery partition is not.
Hibernation works on Ubuntu with a couple error messages while shutting down and some weird screen issues while booting up. But it ends up working decently.
Under Disk Utility the Ubuntu Partition is not marked as Bootable. Should it be?
I would like to dual boot mepis 8.5 and mandriva 2010.1. How do I set up my partitions and how do I install the distros so I can go from one to the other. I have a 40GB hard drive, which has been wiped clean.
View 4 Replies View Relatedif having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies View RelatedAfter installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
I have a new win7 system with a 500GB HD. What is considered the safest way to partition the disk before installing Ubuntu?
View 9 Replies View RelatedI have been running Ubuntu 9.10 and Win XP Professional as a dual boot system, with each OS on its own HDD, smoothly and seamlessly since the release of 9.10. Yesterday one of my kids got a video file from a friend and it had a virus along with it. Long story short, in the process of trying to repair it Windows shuddered it last agonizing breath.
Now I have to re-install Windows because some of the programs the schools make them use require Windows. How do I go about doing this without damaging my Ubuntu installation? Will re-installing on a second drive affect GRUB?
I killed Win XP awhile back, but there are a couple games I need to format for Ubuntu to use, using XP to get there.
I have Ubuntu LTR. I formatted disk to install XP. I installed XP. I can't boot into Ubuntu anymore unless from a live CD. From Live CD, I can see my Ubuntu is still there, but from XP, disk manager it shows that space as empty (free). How can I dual boot, now? Please don't tell me I need to reinstall Ubuntu, I may cry. Any help is appreciated and my apologies if my search didn't get me the answers, the other similar problems I saw were in reverse order (Linux onto drive after XP).
When I split the partition in my windows system, my harddisk was converted to Dynamic Disk. Now I want to install dual-boot with Ubuntu on my computer, is it do-able? How?
View 1 Replies View RelatedGNU GRUB 0.97
Ubuntu 8.04.4
2.6.24-26
Added an SSD (dev/sdc) and decided to move some less often changed directories there. Started with /usr and /boot, leaving / on a primary in the first drive, for now. All started ok, and my changed fstab mounted the right ones, and the system works.
However, grub is actually using the original /boot on / on sda1. I cannot see any way to change this. (Which makes it sorta hard to update the kernel
From grub:
Okay, since it has two choices, I tried to tell it which one to use. But, grub> root (hd2,5) does nothing.
Disk /dev/sda:
what I seem to recall, grub doesn't care about the boot flag on the disk. Nor does it care about primary vs. logical (except GNU doc says "makeactive" only works on a primary?).
The GNU doc also indicates that it looks for a directory /boot on the partition, so if you're mounting a partition as /boot, it also needs to contain a /boot directory under it. Tried that, but no change.
Is my problem the logical partition? Does that prevent "grub> root" from changing it? I'm afraid to wipe out the old /boot and find that I can't start up.
I am building a new PC from scratch and want to dual boot XP and Ubuntu. I have two 1TB drives. I was planning to run RAID 1, whereby one drive would mirror the other drive, and install XP, Ubuntu, and all data on the single drive. Now Im thinking maybe I should reserve the 1TB drive for data and install two smaller drives, one to hold XP and one to hold Ubuntu and their respective programs. In this latter config, the OS and programs would not be mirrored. Im new to dual booting and linux.
View 1 Replies View RelatedHow to correctly install F11 on the same disk as Windows. I have created the partition but can't tell what F11 install to use to setup as dual boot with Windows XP Pro 64bit.
View 2 Replies View RelatedI'm trying to understand how I can partition my hard disk to allow for a dual boot (Windows & Ubuntu) as well as allow access to a certain set of files from both Windows & Ubuntu. So far I understand that I'll need:
1 Windows boot partition ~2-4GB
1 Linux boot partition ~2-4GB
1 Linux swap partition ~1-2 GB
But I don't know:How can I keep my non-boot linux files & folders -- /home, /usr, etc. -- separate from the boot files? Do I need another partition? If yes, what size & format -- FAT32, ext3, etc. -- should it be?
If I separate, for instance, the "/home" folder only where do the remaining folders and files reside?
How can I access certain files with both Windows & Ubuntu? Do I need yet another partition, formatted in FAT32?
I would like to install XP to /dev/sda5,sda6 being karmic. (I may have a dying dvd burner as was unable to install it yesterday but..) I got in a dreadful mess with grub after attempting to upgrade to Lucid,I needed to reinstall anyway. Will I be able to dual boot or should I just start from scratch?
View 4 Replies View RelatedI've been wanting to do this for a while and after upgrading some of my pc components I decided I would finally try to dual boot with full disk encryption on both windows 7 and Ubuntu 9.10. I managed to encrypt the windows drive with truecrypt and that worked. I installed Ubuntu 9.10 using the alternate cd and everything but /boot is in an encrypted LVM. Each OS is on a separate SATA drive the windows is on sda1 and ubuntu /boot is sdb1.
To setup the dual boot I started out following the tutorial [url] but its for XP and versions of ubuntu that use grub not grub 2. I ran dd as posted and saved the files it produced from truecrypt. I then ran into some problems with grub reinstallation so I simply reinstalled Ubuntu 9.10 from scratch again. This put grub 2 on the computer. I've managed to get it to add a Windows 7 option.
However, when the option is selected truecrypt comes up and says that the bootloader is corrupted and that I need to use the repair CD I burned before I encrypted the drive. My question is does anyone have any experience dual booting using Truecrypt on Windows 7 and LUKS/dm-crypt on Ubuntu 9.10 with grub 2? And how would I get the boot menu to work? I'd rather not reinstall but if I have to I have images from right before I encrypted so it wouldn't be the end of the world.
My system has Windows XP Pro SP2 installed on /sda1 and originally a 10.04 on /sdb1-3, now upgraded to 11.04. The Ubuntu system works fine (teething troubles with nvidia drivers on upgrade but fixed now), and the Windows system shows up in the grub menu, but when it's selected, I just get `GRUB Hard Disk Error' and nothing else. Windows installed properly, and booted successfully until I installed Ubuntu in the first place. I can still access the files on that drive from within Ubuntu.
I've tried fixboot in the Win Recovery Console, which sounded like it did something, but didn't fix the problem. This problem isn't new to grub2, by the way - I just haven't needed Windows in a year.
Today I decided to give Fedora15 a shot, mainly because of Gnome3, and so decided to install it over my Ubuntu installation. This is my partition scheme:Two NTFS partitions for Windows;
One logical partition, which inside has:
/dev/sda5 for /boot
/dev/sda6 for /
[code]...
I'm having installation issues with linux. I'm trying to set up a dual boot with vista and linux. I prepared my computer by backing up my files and partitioning my hard drive, leaving 20GB for linux. I downloaded Linux Mint 7, and booted from USB (using the universal USB installer from pendrivelinux.com). All good, entered into linux and installed by following the prompts (selecting use largest unallocated partition to point linux to the partition). At this stage the screen cleared to just leave me with the desktop background.
I patiently waited for it to reboot which never happened. So I waited for 20mins or so, then shut the computer down because I couldn't think of what else to do. When I restarted (without using the livecd/usb) it just went straight to vista. I did a bit of reading and found it might have been something to do with vista taking over grub, and some of the tutorials suggested downloading EasyBCD. So I did that, here's the summary:
Code:
There are a total of 2 entries listed in the Vista Bootloader.
Bootloader Timeout: 30 seconds.
Default OS: Linux Mint 7
Entry #1
Name: Microsoft Windows Vista
BCD ID: {current}
Drive: C:
Bootloader Path: Windowssystem32winload.exe
Windows Directory: Windows
Entry #2
Name: Linux Mint 7
BCD ID: {default}
Drive: C:
Bootloader Path: NST
st_grub.mbr
Code:
Windows Boot Manager
identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795}
device partition=C:
description Windows Boot Manager
locale en-US
inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e}
default {bbf9569e-31e5-11df-a844-91f7867d7949}
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
displayorder {3fb6bf63-700d-11db-8409-0016d303c867}
{bbf9569e-31e5-11df-a844-91f7867d7949}
toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d}
timeout 30
Windows Boot Loader
identifier {3fb6bf63-700d-11db-8409-0016d303c867}
device partition=C:
path Windowssystem32winload.exe
description Microsoft Windows Vista
locale en-US
inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7}
recoverysequence {572bcd55-ffa7-11d9-aae2-0007e994107d}
recoveryenabled Yes
osdevice partition=C:
systemroot Windows
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
nx OptIn
Real-mode Boot Sector
identifier {bbf9569e-31e5-11df-a844-91f7867d7949}
device partition=C:
path NST
st_grub.mbr
description Linux Mint 7
Now when I turn my computer on, I get options for vista and linux. Vista works fine, but if I select Linux Mint 7 I get an error that reads "cannot load from harddisk, insert systemdisk and press any key".
I must say that until now I have worked with Win2000/Xp. Long time ago I worked with Xenix and in the last 2 month sometimes with Ubuntu.Now I have brought a new PC with 320Gb HD and 4 Gb RAM, and I wish to built a dual boot system, with Win7 and Ubuntu.
View 3 Replies View RelatedAbsolute newbie to Linux (assume I'm a complete dummyhead. I don't understand anything about Linux.). Just bought 500GB HDD. Made 3 partitions, 1 for Linux, 1 for Windows, and 1 for data.
1st, installed Win XP on 2nd partition (NTFS)
Then installed 64-Bit Ubuntu on 1st partition (Ext4)
(Created a 2 GB partition and for the swap file.)
Not sure which partition is primary, extended, etc., never really understood all that stuff anyways. XP was working perfectly, till I installed Ubuntu. Now, it just boots straight into Ubuntu, doesn't give the option to boot into XP. Tried everything I know, but it will not give the option to go into XP.
I have created 5 partitions:2 GB ext320 GB ext310 GB ext320 GB ntfs400 GB ntfsI have already installed XP on 20GB ntfs. Will dual boot work if I use the 3 ext3 partitions to install Ubuntu?
View 4 Replies View RelatedI have Ubuntu 10.10 on my laptop currently and my mom would like to have it on hers as well. However, she does not want to get rid of Windows 7, or use Wubi (for some reason). So, my only choice is to dual boot it. While I was installing it onto my laptop there was an option to choose the partitioning. There wasn't an option to do this on my her laptop though because you can only have 4 partitions on a hard drive apparently. The partitions are:
NAME (TYPE)
System (NTFS)
C: (NTFS)
Recovery (NTFS)
HP TOOLS (FAT32)
Is there anyway to backup a partition (Like Recovery) and make it bootable from a flash drive/CD? Or is there any other work around from this?
I've been using ubuntu exclusively on my two laptops lately, for coding and all of my other work. I plan on installing it onto my desktop now for work as well, but I would like to retain Windows 7 so I don't have to worry about compatibility for all of the games I love to play. My question is this:When setting up my partitions, how much space (and what format) should I set aside for windows to write and read games from? I have a 500GB hard drive currently, and was planning the partitions as:
1. Windows 7 (NTFS, setup with Windows installer) ~20 GB
2. File Storage (NTFS, set up with the Ubuntu install partitioner) ~452 GB
3. Ubuntu (EXT3, set up with Ubuntu install partitioner) ~ 20 GB
4. Swap (~2x the size of my RAM) ~ 8GB
The plan is to have Windows install and execute games from the NTFS File Storage partition, while being able to access the same partition from Ubuntu for my documents, code files, music, etc.I don't know if this would work, and I'm also not sure what my file system will be like (windows or linux-y?) if it did. Will this work? Or is there a more elegant solution?