I remember I tried to boot Ubuntu Netbook Edition LiveCD once, but I had a problem with 3D graphics, and a result I couldn't see the menu panels, etc. So, I was wondering, will the same thing happen with Natty, since they are both Unity? Or will they improve support for graphics in 11.04?
View 2 Replies
Since next launch will have Unity desktop, I decided to install the netbook and available unity edition for 10.10, but my experience has been less than pleasant. :-/ I'll post a few comments about my worries, perhaps you know how to solve them already. The left bar is nice: but so far I've been unable to customize it! Not intelhidding, nor control over the size. The pick into the dock problem has already solve for unity but not for Netbook. Personally, I rather prefer a docky panel instead of an un-customizable bar.
Mension by a lot of people, the <Alt>-F1 and <Alt>-F2 binding are not working. I've never used <Alt>-F1 but <Alt>-F2 is quite useful for the intermediate or advance user. The Super-key: In netbook desktop somehow I loved that the super-key allows us to select a launcher from the bar. However this functionality is not in Unity. Worse, each time I press super-key, it sends me to the menu... How could I use the compiz functions so? like Super-a My compiz-configuration from Gnome is used by Unity... so when I press the show desktops I can see only one. How do I get 4 of them? I really, really love the fact that in the upper bar are shown the menu of the current selected window, specially because one can un-maximize the window and the menu remains in the panel. Perhaps the upper border of the graphical windows could be made thiner.. since there is no menu there any more!
I think this is mostly it! Anyway... I'll keep in touch Although all my possible negative comment, I think you have done a remarkable work with this environment... but we all know that mind breaking changes should support crisis! Don't they?!
X is working, I get a desktop, all updates are current, just no Unity menus/window/widgets/whatever, blank desktop with single mapped network folder and no working keyboard shortcuts after initial login. I upgraded on Alpha 2 and it ate my desktop, never has given it back for 3 months. I assumed eventually the upgrades would fix it. Looked into ditching Unity and doing GDM, but thought I'd wait it out, ran dpkg-reconfigure unity and it did nothing, can't find any relevant errors in the logs, where should I be looking and/or what should I be doing? Running lots of servers on this box and have dual-boot, otherwise I'd probably torch it and start over.
View 1 Replies View RelatedI was running Ubuntu 10.4 netbook version (with Gnome) on my Dell Inspiron 910 and yesterday it told me there was an upgrade available, to Natty. I followed the links, did the download, and left it to install overnight. When I got up today, it said it had a problem, because an application was using a file it needed. I thought I had closed everything before I started the process. I acknowledged the message, and proceeded to restart.
I ended up with the standard 10.4 Ubuntu screen, but with no tool bars, status bars, or anything. Just the wallpaper. Keyring login came up and I signed in, wireless said it was connected. So it looks like things are working, just no UI as such. Poked all the screen edges with the mouse, but nothing popped out.
Ctrl><Alt><Del> brought up the logout screen, and if I clicked on Help, I could ultimately get Firefox to run. (Note: the Help screen talks about Gnome, but it had the new popout scroll bars).
If I hold down <Shift> on startup, I get the GRUB menu. I am running linux generic 2.6.38-8 , but I am not sure where to go from there. Running dpkg didn't help.
Wow -everything works with alpha-3 version with a fresh install. Sound, wireless modem, processor speed scaling, sound controls, touch pad, all cores running,power management, battery, fans, etc. NVidia driver is also working. I tried multiple other distro installs - opensuse, Fedora, and ubuntu 10.04 - none worked. Also tried upgrading from 10.04 to 10.10 which didn't work either. also tried upgrading to 2.6.35 kernel which didn't work either.
I'm running a toshiba satellite a505-6030 with an i7 core, nvidia graphics gforce 310M. i didn't have to pass any arguments to grub either . First boot seemed to stall, rebooted machine, and it's been working perfectly since.
i want to install ubuntu10.10 x64 by pxe, so i have following proseed.cfg. and system should install using mirror 10.1.1.2/ubuntu/ubuntu10.10/x64 according to preseed.cfg. But it always report "Bad archive mirror". i could ping 10.1.1.2 and could get file by "wget" from 10.1.1.2.
# Locale sets language and country.
d-i debian-installer/locale string en_us
# Keyboard selection.
d-i console-setup/ask_detect boolean false
[Code]...
I have successfully installed Fedora 11. It works fine with no problem what so ever. My problem is that while using F10 I have created a separate partition for "home". I tried to use the same /home partition for F11 but it did not work. how to achieve this and at what state of the installation.
View 14 Replies View RelatedThis weekend, I'll rebuild a broken Windows Vista laptop installation for a friend. I would like to use Ubuntu. My friend only needs web and email, but everything must be easy: user-friendly, not "technical". The full Ubuntu desktop is not workable for her. She finds it too geeky, too complicated. She is not technical, and she only uses her computer for a few minutes each week.
10.10 Netbook sounds perfect (based on good experiences of 10.04). But when installing 10.10 Netbook, the system reports "No Required Driver For Unity", and starts with the full Desktop GUI, not the Netbook GUI. This happens on machines that worked perfectly with 10.04 Netbook.
OK, you can't have a 3D GUI without 3D hardware acceleration. But is there a way to enable the Netbook menus in a 2D style? Similar to 10.04, but with the updated look, and the updated applications?
The Netbook Edition looks like a great way for mainstream Windows users to upgrade to Ubuntu. But this experience must not be limited to rich people with new hardware. Surely, Ubuntu's hardware requirements don't exceed those of Windows?
i installed ubuntu desktop 11.04 on my acer aspire one 751h and found that the wifi didnt work. the netbook remix was the same so i went through all the previous releases up until 8.0.4.4 which worked fine on the live cd. so i tried to install but the installer didnt see my main hard drives only the usb i was using to install. so i tried using wubi installer which only left me with this screen when i tried to load up ubuntu.
View 3 Replies View RelatedI am a linux newbie, I spent more than 3 days trying to set up the drivers for my Intersil Prism 2 Wi-Fi adapter on CentOS 5.5. While trying to Make the driver source I receive errors of missing libraries. Is the hostap driver included in the Centos Kernel? I tried with insmod hostap but it didn't work..? Is there a kernel patch with the hostap drivers? I will be glad if someone can give me ideas or directions for setting up the driver properly.
View 1 Replies View RelatedI have installed 11.4 with almost no problems. I cannot seem to get Unity to work. error states that I don't have the proper hardware? I have a new Toshiba Satellite laptop. I downloaded and installed the 11.4 x64 desktop version. should the laptop and the desktop be same? or is there a laptop version?
View 3 Replies View RelatedI'd like to upgrade my netbook from Lucid Netbook Edition to Maverick. However, in trying the live USB, I found Unity to be unusable. Is it possible to use Maverick and keep the interface from the Lucid Netbook Edition?
<rant>Unity is painfully slow and missing several essential features. Also, who in their right mind would make a sidebar that's reminiscent of the MacOS dock? Mixing launchers with icons for currently-open programs is brain dead.
I just upgraded to Natty Narwhal. When I first logged in a pop-up dialogue appeared saying that my computer did not fulfil the hardware requirements to run Unity. That cannot be possible this is the output of the lscpu command:
Code:
Architecture: i686
CPU op-mode(s): 32-bit
CPU(s): 2
Thread(s) per core: 2
Core(s) per socket: 1
CPU socket(s): 1
Vendor ID: GenuineIntel
CPU family: 15
Model: 3
Stepping: 4
CPU MHz: 2999.900
L1d cache: 16K
L2 cache: 1024K
This is is the output of the free command:
Code:
total used free shared buffers cached
Mem: 1251612 916332 335280 0 74220 383576
-/+ buffers/cache: 458536 793076
Swap: 860156 0 860156
Summarized that is:
Pentium 4 3GHz core running two threads
1.2GB of ram
I would use Istanbul but it was made for the gnome desktop so it doesn't work. I'm using unity 11.04 natty.
View 1 Replies View RelatedI have 2 hard disks. sda,sdb
In sda, I have 4 partitions, and I have windows 7 in one of the extended partitions [not in the primary partition].
In sdb, I have 3 partitions. 2 for storage, and 1 10GB drive for Ubuntu. Again, Ubuntu is not of a primary partition.
I had ubuntu 10.04 running on that for a long time. However, I wanted to reinstall ubuntu and use 10.10.This is what I did EXACTLY:Booted from Ubuntu install CD
Chose advanced istall
Selected sdb3 for Ubuntu
I installed GRUB2 on the SAME partition as Ubuntu aka sdb3 Installed then rebooted
I can boot into Ubuntu fine, but whenever I select Windows 7 bootloader from the GRUB menu, the screen goes black, and my PC reboots.
Boot Info:
Code:
Boot Info Script 0.55 dated February 15th, 2010 [code]....
ls: reading directory sda6/: Input/output error
I have tried the testdisk/update-grub method, but it didn't work.
I installed ubuntu-10.10-netbook-i386.iso hoping I would get the Unity User Interface, but to my dissapointment I got the regular one.
I checked the user settings and 'Netbook Edition' is selected as my default view.
What can I do to get the Unity Interface?
I have the install disk on a pendrive and all that (Its the netbook remix 10.04) but when I try to run the "Demo and full installation" I reboot and it just goes back to windows xp. I tried to install the cd helper thing, but it just makes an error and fails. I can't seem to get into the bios because whenever I reboot, the screen is black until windows is loaded and everything. Any help would be appreciated. My netbook is a NB200 by Toshiba.
View 1 Replies View RelatedA week or so ago I upgraded from UNE 10.04 to 10.10 and I can't stand the Unity interface, mostly because the full color icons on the left are really distracting.
How do I either
a) switch back to the old UNE interface (preferred)
or
b) change to the standard desktop?
Having just upgraded to 10.10, I've discovered Unity, and I'm afraid its not for me. I absolutely loved the previous interface, and was quite shocked and saddened to see it disappear. But I'd like to keep all the other new software that comes with 10.10. So my question is, can I install the old 10.04 beautiful interface to run on the 10.10 edition? Re-installation is a MS solution, that turned me on to linux in the first place!
View 9 Replies View RelatedI have been running the 10.10 Netbook version for about 3 weeks, as as a dual boot with Windows XP on an MSI Wind netbook primarily with an external monitor (and the netbook monitor off). Because I am using an external monitor, I'd like to get more of a full desktop experience. However, when I read on the forum how to get Gnome desktop workin, or even the desktop-switcher utility, I think there is something wrong with my installation.
I have the unity launcher on the left, which does not appear to have any easy way to add items. I have the bar across the top, which has the logout/logoff/shutdown button, clock and a few icons (bluetooth, network, etc.) on the right. On the far left, I have an icon that brings up the "Microsoft Bob"-like menu (Web, Music, Photos, Games, etc.). I don't have any menu (System, Applications, etc.). When I logout, I have no option to log in using gnome desktop.
Why don't I have many of these options, that other users describe? What is the best way for me to get the full gnome desktop? When I go into synaptic and search for gnome desktop, dozens of items come up, including many that are marked as installed.
I upgraded to 11.04 about 10 days ago. I have this intermittently weird problem where some of the applications, some of the time, are oversized for the 1024 x 600 display. I can't get to the buttons on the bottom end of the screen, and the window refuses to decrease in size enough so that it all fits on. So far, I've had this problem with Evolution, Pytrainer, Gimp, and another one that escapes my memory.
Has anyone else had this issue? (Except for the Evolution bug, which has been around since 2005 or thereabouts. How on earth is that thing still the default when nobody bothers to fix it up?) how to a workaround? Heck, I don't even know where to go to report this kind of bug.
What does it do?? Can i remove it??i tried apt-get remove dnsmasq. it didn't work
View 9 Replies View Relatedi did it to mount my hd in the startup but id didnt work, so i want to undo it, and if somebody can tell how to make my hd to be mounted since the startup
[Code]...
My laptop is an HP Pavilion dv6 3078-tx. It is was a great laptop when it was running windows 7 but when I tried installing Ubuntu, I slowly began to hate it more and more. The issue is with the ATI and Intel switchable graphics card. Ubuntu installs fine and things seem to be great but I cant use the better graphics effects in ubuntu. I installed the driver that ubuntu provides for ATI and it didnt work and ubuntu booted into a terminal etc.. and I had to put it back to the way it was before. After sometime researching on the internet I know the problem is with the swtichable graphics.
Unfortunatley there is no option to turn off switchable graphic in my bios and hp arent much of a help. I dont know what to do now ? Is there any way to get switchable graphics to w ork with linux, is there way to get version of the bios that lets me disable it ? any variations of ubuntu or linux that it works with. I would prefer to use the ATI if i have to disable one or the other cause Im usually running on ac power anyways.
i would like to change my OS to Ubuntu netbook remix, but I already have installed Kubuntu netbook package.
Is there any easy way to make switch from Kubuntu to Ubuntu? Without need to delete all my data?
It's possible I just did something wrong...Anyway, I don't have any sounds, and haven't since installation.
Code:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
Subsystem: Hewlett-Packard Company Device 3059
[code]...
Maybe saying Ubuntu is getting worse is unfair. I'm not a big user I have to say. I use it more out of curiosity than anything else. I first used 8 and it was brilliant. I told all my mates about it. Everything work great. I had all desktop effects. I could use a KDE session. Then I upgraded to 9 and lost KDE ability but still had all desktop effects available. Upgraded to 10 a few weeks ago and now no desktop effects. Non of the above is a problem but I feel like, for me, it's going backwards.
I use an old AMD 2600 machine with a Radeon 9600. I used to be able to use ATI Catalyst but that didn't work after the upgrade to 10 and I can't seem to find a solution. Ubuntu is still brilliant but I don't like things being taken away from me.
I tried "gksudo nautilus", and it didn't work! When the root window pops-up, it isn't there! I would like to delete this annoying file so that i can see my whole desktop.
View 7 Replies View Relatedi have MB:Gigabyte 770t USB and Cpu Phenom II x2 555 BE My sound card didnt work and i have no sound at alll. only hardware that reconized as sound output in my sound setting is 5700 series HDMI which blong to my VGA.
View 9 Replies View RelatedI recently noticed some of my one-liners with && and || didn't work as I expected so I googled for "bash && || pitfalls" and found this page [URL] It's probably my fault, but I still don't understand why it wouldn't work as I want it..... I don't even have the code anymore that wasn't working properly because I rewrote it using if ; then ; command ; fi
View 4 Replies View Related
