Ubuntu :: Graphics Card Didn't Work
Feb 11, 2011
My laptop is an HP Pavilion dv6 3078-tx. It is was a great laptop when it was running windows 7 but when I tried installing Ubuntu, I slowly began to hate it more and more. The issue is with the ATI and Intel switchable graphics card. Ubuntu installs fine and things seem to be great but I cant use the better graphics effects in ubuntu. I installed the driver that ubuntu provides for ATI and it didnt work and ubuntu booted into a terminal etc.. and I had to put it back to the way it was before. After sometime researching on the internet I know the problem is with the swtichable graphics.
Unfortunatley there is no option to turn off switchable graphic in my bios and hp arent much of a help. I dont know what to do now ? Is there any way to get switchable graphics to w ork with linux, is there way to get version of the bios that lets me disable it ? any variations of ubuntu or linux that it works with. I would prefer to use the ATI if i have to disable one or the other cause Im usually running on ac power anyways.
View 2 Replies
ADVERTISEMENT
Jan 7, 2011
i have MB:Gigabyte 770t USB and Cpu Phenom II x2 555 BE My sound card didnt work and i have no sound at alll. only hardware that reconized as sound output in my sound setting is 5700 series HDMI which blong to my VGA.
View 9 Replies
View Related
May 8, 2010
i installed suse (KDE) on my old notebook and now I'm trying to get the wlan to connect to our router and can't figure out how to get it to work. My card seems to work, the network manager even finds the router, but i just cant get a connection. I followed the steps of the "Getting Your Wireless to Work" thread and these are the results:
[Code]....
- i messed around a bit with the network settings and might have cluelessly broken something (or broken it more)
- i tried a usb-wlan-card as an alternative, which didn't work either, but could possibly have messed things up even more.
View 7 Replies
View Related
Jun 20, 2011
Last month I installed a newer MoBo + CPU and PSU, (See system specs in my signature) and moved from Maverick to Lucid 10.04.
I was running Natty 11.04 64bit up until a couple of days ago, but that was locking up like mad. I did a fresh install of 10.04 over the whole HDD yesterday...though cannot recall it asking me if I wanted 32 or 64bit...will neeed to check)
I'm using an ATI Radeon (Sapphire?) x1650 PRO graphics card - but borrowed from a friend as my previous card wouldn't fit in the upgrade motherboard. Ubuntu is running quite fast with it but often stutters when on Firefox or Chrome. With Natty the system would lock up at least once an hour, with Lucid - at the moment it's only locked up once in 6 hours... I'm assuming this is just problems with Ubuntu and not the card. I get no odd lines or color on the screen.
I'll need to give this card back at some point... I'm wondering if people could suggest other cards (Nvidia/ATI or other) that are known to work happily with Ubuntu 10.04. I've got a budget of around �40, but then I'm not gaming so guess shouldn't need anything too high spec. (My PSU has a PCI-E connector if needed...though doubt it will be!)
View 4 Replies
View Related
Dec 25, 2009
I just got a new graphics card (all specs below) and when I start up the computer, it loads the BIOS, then says it's loading grub 2, then says, "Initializing gfx code..." and hangs there forever. How can I diagnose this and find out if the card will work with my computer and opensuse 11.1?
CARD SPECS
------------
NVidia GeForce 8400 GS
[code]....
View 5 Replies
View Related
Mar 10, 2010
I am a new Ubuntu user and am having trouble getting the audio to work through the hdmi out to my tv using an Nvidia Ion graphics/sound card.
As far as I can make out Ubuntu recognises the sound card l but i cant get any sound out of it and don't know to go about altering anything.
View 3 Replies
View Related
May 25, 2010
I have a PCI graphics card, Nvidia Geforce FX 5500, but can't get it to work. I have 10.04 installed on a Dell Dimension 3000, P4, 1Gb RAM, integrated graphics. I installed 10.04 without the card in the machine, then shut down and plugged the card in and booted it up again (BIOS setting is 'onboard' for integrated graphics, 8Mb; only other option is 'auto'). Checking the hardware drivers I can see the recommended Nvidia drivers (v173, not yet activated) and lspci gives me the integrated as well as the Nvidia listing:
01:02.0 VGA compatible controller: Nvidia Corporation NV34 [GeForce FX 5500] (rev a1)
00:02.0 VGA compatible controller: Intel Corporation 8286G Integrated Graphics Controller (rev 02)
So far so good, but that's where it ends. Changing the BIOS setting to 'auto' turns the screen off on reboot, both for the monitor connected to the VGA port of the Nvidia card and for the monitor connected to the VGA port of the motherboard. I have to shutdown, take the card out and set the BIOS back to 'onboard' to be able to boot again (and shutdown, plug the card back in and boot up again to get back to where I was).
Activating the recommended hardware driver and rebooting (still with BIOS set to onboard) gives a blank screen (screen is still on and there may have been a flash of the purple screen with the ubuntu logo); nothing else happens no matter how long I wait. Rebooting doesn't help, it turns off the screen; same result for booting in recovery mode. I can get to the GRUB bootloader and when I replace 'quiet splash' with 'nomodeset' I manage to boot again with the monitor connected to the VGA port of the motherboard, but am not anywhere closer to getting my monitor working on the Nvidea card.
View 5 Replies
View Related
May 18, 2009
My computer have ATI X600 graphics card installed, and I installed CentOS5.3.
Every time I suspend my computer and then resume it, it seem the graphics card can't resume and the monitor says 'no signal', but the system still responses, I can use keyboard.
Is there any configuration I can't do to make it resume normally? I've searched a lot in Google but can't find out any one else run into the same problem.
Information about the card:
Quote:
View 5 Replies
View Related
Oct 11, 2010
I installed a new copy of F13 this morning on my fairly new laptop.32 Bit Intel, 3GB Memory 120GB HDD. The problem I've got is that my Monitor/Graphics card is not getting detected and as a result I'm getting a horrible Resolution/Refresh rate. When I run
lspci | grep VGA
I get this 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10). how I can get my monitor/graphics recognized to work in the Full Resolution.
View 11 Replies
View Related
May 2, 2010
I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first:
Integrated graphics
PCI graphics
PCI-Express graphics (PEG)
I set the BIOS on PEG, but
I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.)I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one.Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says
Current usage: Unknown
There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset!
Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power.It gets all its power from the PCI-E slot; there is no external power connector.The BIOS is an AMI Award BIOS.how can I make the PCI Express graphics card visible to Ubuntu?
View 1 Replies
View Related
Jan 27, 2011
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
View 5 Replies
View Related
Sep 5, 2011
I just bought a new graphics card and installed it. it works perfectly although my sound worked perfectly this morning and I think the graphics card is overriding my built in sound card. I need help fixing the sound. The graphics card I bought is an ATI Radeon Cedar HD 5450 The sound I want to use is HDA VIA VT82xx
when I run alsamixer I get Card:
HD-Audio Generic
Chip: ATI R6xx HDMI
[Code]....
View 3 Replies
View Related
Mar 30, 2009
very much like everybody i am also waiting for centos 5.3, because 5.2 could not sit on my notebook due to obvious driver issues. would anybody tell if centos 5.3 support my x3100 graphics card and bcm 4311 wlan card?
View 5 Replies
View Related
Jan 25, 2010
i have no idea if anyone can help. linux has been nothing but a hassle for me. i just wanted something that wouldn't be affected by viruses. to the point though. i read an thread on here about using fdisk to format sd cards. tried everything it said, not only did it not work but now my svideo to my tv no longer works. i have ubuntu 8.04 (yes i would upgrade but i can't bc for some reason anything newer won't work on my laptop)
View 3 Replies
View Related
Sep 15, 2010
I am a rookie to both Debian and Linux. There is a need of Debian so I just started my experience with the Linux system.
I have installed the Debian squeeze testing version and since when I installed the system it didn't recognize my ethernet card, I could only install what is in the installation CD1. Now I have a nice looking Debian system but very simple with a lot of necessary packages or whatever missing (I don't even have the update manager). Is there some way that I could launch an automatic installation of content in the rest CDs from internet?
View 3 Replies
View Related
Nov 28, 2015
I've been using Ubuntu and Mint for a few years now, and I want to try Linux on my HP Stream7 Tablet. I was very excited to learn that Debian 8.0 and later has support for 32 bit UEFI on 64 bit Processors and went ahead and installed the multiarch version of 8.2. It works, but I have no GUI (Just a command line) and no WIFI connection. It seems the GUI didn't install and the WiFi card is not supported. I have found a driver for the wifi card but don't know how to install this driver. URL....
View 4 Replies
View Related
Mar 5, 2010
I have one Asus motherboard with inbuilt HD 3300 Radeon family graphics system, I have used it with radeon and radeonhd drivers and I have xorg.conf. I tried to change card to Radeon HD 4350 but it didn't give more than terminal view, Xdm didn't start. I believed the driver would support both cards?
View 1 Replies
View Related
Feb 10, 2010
I just installed fedora12 on my machine,But it didn't recognize to my graphic card! my ATI card type is radeon 9550.
View 6 Replies
View Related
Apr 4, 2010
What does it do?? Can i remove it??i tried apt-get remove dnsmasq. it didn't work
View 9 Replies
View Related
Jul 20, 2010
i did it to mount my hd in the startup but id didnt work, so i want to undo it, and if somebody can tell how to make my hd to be mounted since the startup
[Code]...
View 5 Replies
View Related
Feb 12, 2010
It's possible I just did something wrong...Anyway, I don't have any sounds, and haven't since installation.
Code:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
Subsystem: Hewlett-Packard Company Device 3059
[code]...
View 1 Replies
View Related
Jun 12, 2010
Maybe saying Ubuntu is getting worse is unfair. I'm not a big user I have to say. I use it more out of curiosity than anything else. I first used 8 and it was brilliant. I told all my mates about it. Everything work great. I had all desktop effects. I could use a KDE session. Then I upgraded to 9 and lost KDE ability but still had all desktop effects available. Upgraded to 10 a few weeks ago and now no desktop effects. Non of the above is a problem but I feel like, for me, it's going backwards.
I use an old AMD 2600 machine with a Radeon 9600. I used to be able to use ATI Catalyst but that didn't work after the upgrade to 10 and I can't seem to find a solution. Ubuntu is still brilliant but I don't like things being taken away from me.
View 7 Replies
View Related
Aug 26, 2010
Wow -everything works with alpha-3 version with a fresh install. Sound, wireless modem, processor speed scaling, sound controls, touch pad, all cores running,power management, battery, fans, etc. NVidia driver is also working. I tried multiple other distro installs - opensuse, Fedora, and ubuntu 10.04 - none worked. Also tried upgrading from 10.04 to 10.10 which didn't work either. also tried upgrading to 2.6.35 kernel which didn't work either.
I'm running a toshiba satellite a505-6030 with an i7 core, nvidia graphics gforce 310M. i didn't have to pass any arguments to grub either . First boot seemed to stall, rebooted machine, and it's been working perfectly since.
View 4 Replies
View Related
Jan 29, 2011
I tried "gksudo nautilus", and it didn't work! When the root window pops-up, it isn't there! I would like to delete this annoying file so that i can see my whole desktop.
View 7 Replies
View Related
Apr 19, 2011
I remember I tried to boot Ubuntu Netbook Edition LiveCD once, but I had a problem with 3D graphics, and a result I couldn't see the menu panels, etc. So, I was wondering, will the same thing happen with Natty, since they are both Unity? Or will they improve support for graphics in 11.04?
View 2 Replies
View Related
Feb 9, 2011
I recently noticed some of my one-liners with && and || didn't work as I expected so I googled for "bash && || pitfalls" and found this page [URL] It's probably my fault, but I still don't understand why it wouldn't work as I want it..... I don't even have the code anymore that wasn't working properly because I rewrote it using if ; then ; command ; fi
View 4 Replies
View Related
Jan 22, 2010
Just installed CentOS 5.4, had no problems until the first time it tried to login, where the keyboard didn't work. There are bugs logged on both the CentOS site, and the Red Hat site, but nobody seems to have a definitive solution (other than buy a USB keyboard). Bearing in mind that the machine in question is not hooked up to a network (i.e. no internet updates), is there a way to resolve this issue?
View 6 Replies
View Related
Apr 22, 2010
depending on ubuntu and jokosher and it didn't work, it wouldn't see the input in the mic.I download jokosher the night before on windows just in case, and it was needed.can do one day testing, no internet though, so post all possible things and solutions here.How i was recording. I was recording with a condenser mic always on, and outputting from a audio board for a coffee house.
View 3 Replies
View Related
Apr 13, 2011
i want to install ubuntu10.10 x64 by pxe, so i have following proseed.cfg. and system should install using mirror 10.1.1.2/ubuntu/ubuntu10.10/x64 according to preseed.cfg. But it always report "Bad archive mirror". i could ping 10.1.1.2 and could get file by "wget" from 10.1.1.2.
# Locale sets language and country.
d-i debian-installer/locale string en_us
# Keyboard selection.
d-i console-setup/ask_detect boolean false
[Code]...
View 1 Replies
View Related
Mar 10, 2010
i had just installed fedora 12 and my architecture is x86_64. i add dictionary widget on my plasma desktop. in my office i am using internet via proxy. now how can i configure dictionary widget to use the same proxy settings? in my shell i have export http_proxy variables, where else i am suppose to set proxy?
View 3 Replies
View Related
