Ubuntu :: Tried Apt-get Remove Dnsmasq. It Didn't Work?
Apr 4, 2010What does it do?? Can i remove it??i tried apt-get remove dnsmasq. it didn't work
View 9 Replies
ADVERTISEMENT
Debian :: Running Dnsmasq In Lenny - Wvdial Connecting But Dnsmasq Doesn't Work
Dec 30, 2010I am running dnsmasq in debian lenny, wvdial connecting but dnsmasq doesn't work, the /var/run/dnsmasq/resolv.conf file is empty this is /var/log/syslog:
The /etc/resolv.conf and /etc/resolvconf/run/resolv.conf is ok:
This is my /etc/dnsmasq.conf:
[url]
Ubuntu :: Dnsmasq Will Not Apply Changes In /etc/dnsmasq.conf?
Dec 27, 2010ubuntu: 10.04dnsmasq: 2.52-1ubuntu0.1I've installed dnsmasq and it is performing DNS duties correctly. I'd like to limit access to the dnsmasq service to a specific address or interface. I've tried adding variations and combinations of the following to /etc/dnsmasq.conf:
Code:
interface=eth0
and
[code]....
Networking :: Network Sharing Work After Disable Dnsmasq?
Mar 17, 2010I'm sharing the wireless signal (wlan0) on my fedora 12 machine.However, when the computer starts up I have to execute:> service dnsmasq stopOnly after this, will the computer share the internet signal (through eth0).Why is that? Should I uninstall dnsmasq?I've already removed it from chkconfig:> chkconfig --del dnsmasq
View 4 Replies View RelatedUbuntu :: Mount Hd In The Startup But Id Didn't Work
Jul 20, 2010i did it to mount my hd in the startup but id didnt work, so i want to undo it, and if somebody can tell how to make my hd to be mounted since the startup
[Code]...
Ubuntu :: Graphics Card Didn't Work
Feb 11, 2011My laptop is an HP Pavilion dv6 3078-tx. It is was a great laptop when it was running windows 7 but when I tried installing Ubuntu, I slowly began to hate it more and more. The issue is with the ATI and Intel switchable graphics card. Ubuntu installs fine and things seem to be great but I cant use the better graphics effects in ubuntu. I installed the driver that ubuntu provides for ATI and it didnt work and ubuntu booted into a terminal etc.. and I had to put it back to the way it was before. After sometime researching on the internet I know the problem is with the swtichable graphics.
Unfortunatley there is no option to turn off switchable graphic in my bios and hp arent much of a help. I dont know what to do now ? Is there any way to get switchable graphics to w ork with linux, is there way to get version of the bios that lets me disable it ? any variations of ubuntu or linux that it works with. I would prefer to use the ATI if i have to disable one or the other cause Im usually running on ac power anyways.
Ubuntu Multimedia :: Sound Guide Didn't Seem To Work?
Feb 12, 2010It's possible I just did something wrong...Anyway, I don't have any sounds, and haven't since installation.
Code:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
Subsystem: Hewlett-Packard Company Device 3059
[code]...
Ubuntu Multimedia :: ATI Catalyst Didn't Work After The Upgrade To 10
Jun 12, 2010Maybe saying Ubuntu is getting worse is unfair. I'm not a big user I have to say. I use it more out of curiosity than anything else. I first used 8 and it was brilliant. I told all my mates about it. Everything work great. I had all desktop effects. I could use a KDE session. Then I upgraded to 9 and lost KDE ability but still had all desktop effects available. Upgraded to 10 a few weeks ago and now no desktop effects. Non of the above is a problem but I feel like, for me, it's going backwards.
I use an old AMD 2600 machine with a Radeon 9600. I used to be able to use ATI Catalyst but that didn't work after the upgrade to 10 and I can't seem to find a solution. Ubuntu is still brilliant but I don't like things being taken away from me.
Ubuntu Installation :: Upgrading To 2.6.35 Kernel Which Didn't Work Either?
Aug 26, 2010Wow -everything works with alpha-3 version with a fresh install. Sound, wireless modem, processor speed scaling, sound controls, touch pad, all cores running,power management, battery, fans, etc. NVidia driver is also working. I tried multiple other distro installs - opensuse, Fedora, and ubuntu 10.04 - none worked. Also tried upgrading from 10.04 to 10.10 which didn't work either. also tried upgrading to 2.6.35 kernel which didn't work either.
I'm running a toshiba satellite a505-6030 with an i7 core, nvidia graphics gforce 310M. i didn't have to pass any arguments to grub either . First boot seemed to stall, rebooted machine, and it's been working perfectly since.
Ubuntu :: Gksudo Nautilus" Didn't Work?
Jan 29, 2011I tried "gksudo nautilus", and it didn't work! When the root window pops-up, it isn't there! I would like to delete this annoying file so that i can see my whole desktop.
View 7 Replies View RelatedUbuntu Installation :: Unity 10.04 Work If Netbook Ed - Didn't?
Apr 19, 2011I remember I tried to boot Ubuntu Netbook Edition LiveCD once, but I had a problem with 3D graphics, and a result I couldn't see the menu panels, etc. So, I was wondering, will the same thing happen with Natty, since they are both Unity? Or will they improve support for graphics in 11.04?
View 2 Replies View RelatedUbuntu :: Sound Card [realtek] Didn't Work
Jan 7, 2011i have MB:Gigabyte 770t USB and Cpu Phenom II x2 555 BE My sound card didnt work and i have no sound at alll. only hardware that reconized as sound output in my sound setting is 5700 series HDMI which blong to my VGA.
View 9 Replies View RelatedProgramming :: One-liner With && And || Didn't Work
Feb 9, 2011I recently noticed some of my one-liners with && and || didn't work as I expected so I googled for "bash && || pitfalls" and found this page [URL] It's probably my fault, but I still don't understand why it wouldn't work as I want it..... I don't even have the code anymore that wasn't working properly because I rewrote it using if ; then ; command ; fi
View 4 Replies View RelatedRed Hat :: CentOS 5.4 PS/2 Keyboard Didn't Work
Jan 22, 2010Just installed CentOS 5.4, had no problems until the first time it tried to login, where the keyboard didn't work. There are bugs logged on both the CentOS site, and the Red Hat site, but nobody seems to have a definitive solution (other than buy a USB keyboard). Bearing in mind that the machine in question is not hooked up to a network (i.e. no internet updates), is there a way to resolve this issue?
View 6 Replies View RelatedUbuntu :: Depending On Jokosher And It Didn't Work, It Wouldn't See The Input In The Mic?
Apr 22, 2010depending on ubuntu and jokosher and it didn't work, it wouldn't see the input in the mic.I download jokosher the night before on windows just in case, and it was needed.can do one day testing, no internet though, so post all possible things and solutions here.How i was recording. I was recording with a condenser mic always on, and outputting from a audio board for a coffee house.
View 3 Replies View RelatedUbuntu Installation :: Proseed.cfg Mirror Setting Didn't Work?
Apr 13, 2011i want to install ubuntu10.10 x64 by pxe, so i have following proseed.cfg. and system should install using mirror 10.1.1.2/ubuntu/ubuntu10.10/x64 according to preseed.cfg. But it always report "Bad archive mirror". i could ping 10.1.1.2 and could get file by "wget" from 10.1.1.2.
# Locale sets language and country.
d-i debian-installer/locale string en_us
# Keyboard selection.
d-i console-setup/ask_detect boolean false
[Code]...
Fedora :: Dictionary Widget Didn't Work
Mar 10, 2010i had just installed fedora 12 and my architecture is x86_64. i add dictionary widget on my plasma desktop. in my office i am using internet via proxy. now how can i configure dictionary widget to use the same proxy settings? in my shell i have export http_proxy variables, where else i am suppose to set proxy?
View 3 Replies View RelatedHardware :: 10.10 Asus Wl-107g Didn't Work
Jan 12, 2011I have Lubuntu 10.10 on and old old IBM Think T22 with an Asus wl-107g WLAN PCMCIA card installed.. When i first installed the distribution it didn't work. Then i rebooted a couple of times and then it worked no bother, but now it doesn't work again..
The error is basically that it doesn't seem to recognize it anymore.. it doesn't recognise any network hardware other that the built in ethernet card (which for some reason got the name eth2, suggesting that there is an eth0 and eth1 but ifconfig doesn't show them)
General :: Apt-get Install Fotoxx Didn't Work
Mar 3, 2010install ( fotoxx-9.2.tar.gz ), apt-get install fotoxx didnt work. Its on my desktop waiting.
View 5 Replies View RelatedServer :: Slave Ldap Didn't Work?
Apr 19, 2010OS :: Debian Lennyldap :: Openldap (newest one/get from apt-get)replication :: yes (on different machine)secure :: yes (tls)hi there i got problem on slave ldapwhat i am trying to do now is to have machine authenticate at slave ldapwhen master ldap die. So i stop slapd service at master ldap and try to authen. As a result of it, the prompt for login appears to fill in username but with the correct password couldn't make login successfully. I have checked at log file but there is any authen log of that login I wonder if it doesn't direct authen to slave ldap server. Here is my client config ::
#
# LDAP Defaults
#
[code]....
Server :: X Forwarding On SSH In CentOS Didn't Work
May 25, 2010I was able to do on Debian and Ubuntu Servers X applications running on remote servers where I was able to login via SSH. Tried the same with CentOS did not worked. in /etc/ssh/sshd_config
[Code]....
Software :: Set Firefox - Vacation Didn't Work
Sep 22, 2010It was working fine But when I came back form vacation it dint work its all about [URL] When I log in it says premium a/c But when i try to download any file in new tab it says "Log in again" How can i set firefox so that i dont have to keep login again?
View 1 Replies View RelatedUbuntu :: Lirc With Jetway ION2 Chipset - IR Receiver Didn't Work
Jan 27, 2011I just installed 10.10 on a Jetway HBJC600C99-52W machine. It has the NVIDIA ION2 chipset. Through a lot of struggles, I have managed to get most of the computer working well with Linux. The part that I'm still struggling with is the remote control. With Ubuntu out of the box, perhaps about 1/3 of the buttons are recognized. From additional research, it looks like lirc is supposed to address this issue. I tried installing lirc however, after installation the only thing that shows up is /dev/lircd. I was expecting something like /dev/lirc0. I've tried is via
sudo apt-get install lirc
and then I picked the Windows Media Center receiver
I also tried what was in this thread [URL] however, that seems to be on a different jetway model, an NVIDIA ION chipset instead of an ION2 and the driver install for the IR receiver didn't work for me. I was wondering if anyone had success installing lirc and getting all the keys on their remote working.
Ubuntu :: Install Boost Library - Sudo Apt-get Libboost Didn't Work
Apr 9, 2011Trying to install e4rat that was on LifeHacker on Friday and have zero idea what I am doing. I have the e4rat extracted to a directory in /usr/local/src The README says that there are dependencies including boost library components. I am fine installing the whole boost library but sudo apt-get install libboost* did not work.
[Code]...
I tried to bang around a little to try to learn something with this but can't get any further.
Debian :: Didn't Work With The Default Wireless Drivers
Jul 20, 2010I have gotten Debian working quite well on my Sony Vaio laptop for the past 6 months or so, and it's a very rewarding experience. I however have a small amount of problems that I could not find the answer to through googling or reading Debian instructions.
1) I have an Atheros-based wireless chipset in my laptop that didn't work with the default wireless drivers in Debian. So I replaced them with madwifi drivers and it works great now. However, every time I restart the computer, it defaults back to 1mb/s wireless speed; making me go into root terminal and change the speed with "iwconfig ath0 rate 54M". Obviously this gets a little bit annoying to enter every time, so I am looking for a way to make it automatic. I have looked on Google and gotten some hits but none of them have been successful.
2) Whenever I put the computer on stand-by then return, the wifi refuses to connect. Networkmanager tries to connect then crashes. I have found no hits on this issue with my configuration. Very odd.
Fedora Installation :: F11 & Home Partition Didn't Work
Jun 12, 2009I have successfully installed Fedora 11. It works fine with no problem what so ever. My problem is that while using F10 I have created a separate partition for "home". I tried to use the same /home partition for F11 but it did not work. how to achieve this and at what state of the installation.
View 14 Replies View RelatedFedora Networking :: ZTE MF627 3G USB Dongle On 3UK Didn't Work
Mar 17, 2010I bought the modem above (ZTE MF627), which works great in Windows 7. My laptop dual boots between Windows 7 and Fedora 12, so I rebooted into Fedora and spent a few hours trying to get the modem working. Scouring the Ubuntu forums (as there's only one post on these forums and it simply didn't work), I found a few possible solutions, but nothing seems to be solving the problem. Here goes... The modem gets picked up by the kernel and appears as a USB device.
[Code]...
OpenSUSE Hardware :: Brightness Controls Didn't Work ?
Jul 21, 2011Recently I tried putting Kubuntu Natty Narwhal on yet again and to my surprise it mostly worked. The only major thing wrong with it was my brightness controls didn't work (I have a VPCCW21FX laptop) at first this was an anoyance being blinded by my screen but I soon realized that it was killing my battery life. So having tried to seek help in getting it to work I tried out OpenSUSE. They worked! but as soon as I updated the kernal they no longer worked. No Problem. I reinstalled and told it to never apply that update. Then I installed the official nvidia drivers via repository on the opensuse wiki. they installed and worked but my brightness controls were once again broken.
Sony VPCCW21FX Laptop. Intel Core I3 Nvidia 310M
Nvidia Driver version 270.41.06-5.1 x86_64
General :: Copy File Or Directory - Didn't Work ?
Mar 3, 2011What is the correct way to copy a file or directory to another directory? In the past I was able to use press the mouse left and right button, it didn't work all the time hard to press the two buttons at the same time. With the Fedora 14 it does not work at all.
View 3 Replies View RelatedDebian Hardware :: Lenny Brothers DCP-195C Didn't Work?
Jun 15, 2010I bought a brothers printer yersterday. And it doesn't work on Debian Lenny. I've tried to install this drivers : dcp195clpr et dcp195ccupswrapper with dpkg command but nothing work. When I try to print nothing happen. But in CUPS, there a printer call dcp-195c.
View 4 Replies View Related