Ubuntu Installation :: Upgrading To 2.6.35 Kernel Which Didn't Work Either?
Aug 26, 2010
Wow -everything works with alpha-3 version with a fresh install. Sound, wireless modem, processor speed scaling, sound controls, touch pad, all cores running,power management, battery, fans, etc. NVidia driver is also working. I tried multiple other distro installs - opensuse, Fedora, and ubuntu 10.04 - none worked. Also tried upgrading from 10.04 to 10.10 which didn't work either. also tried upgrading to 2.6.35 kernel which didn't work either.
I'm running a toshiba satellite a505-6030 with an i7 core, nvidia graphics gforce 310M. i didn't have to pass any arguments to grub either . First boot seemed to stall, rebooted machine, and it's been working perfectly since.
I'm fairly new to linux Red Hat. We are running Rhel 3 on our VM's. We ran into a issue, (Bug 121801 - athlon-smp kernel does not support >4GB of RAM. what the stepos are to upgrade the existing kernel to the new i686? .
I remember I tried to boot Ubuntu Netbook Edition LiveCD once, but I had a problem with 3D graphics, and a result I couldn't see the menu panels, etc. So, I was wondering, will the same thing happen with Natty, since they are both Unity? Or will they improve support for graphics in 11.04?
i want to install ubuntu10.10 x64 by pxe, so i have following proseed.cfg. and system should install using mirror 10.1.1.2/ubuntu/ubuntu10.10/x64 according to preseed.cfg. But it always report "Bad archive mirror". i could ping 10.1.1.2 and could get file by "wget" from 10.1.1.2.
# Locale sets language and country. d-i debian-installer/locale string en_us # Keyboard selection. d-i console-setup/ask_detect boolean false
I have successfully installed Fedora 11. It works fine with no problem what so ever. My problem is that while using F10 I have created a separate partition for "home". I tried to use the same /home partition for F11 but it did not work. how to achieve this and at what state of the installation.
i installed ubuntu desktop 11.04 on my acer aspire one 751h and found that the wifi didnt work. the netbook remix was the same so i went through all the previous releases up until 8.0.4.4 which worked fine on the live cd. so i tried to install but the installer didnt see my main hard drives only the usb i was using to install. so i tried using wubi installer which only left me with this screen when i tried to load up ubuntu.
I am a linux newbie, I spent more than 3 days trying to set up the drivers for my Intersil Prism 2 Wi-Fi adapter on CentOS 5.5. While trying to Make the driver source I receive errors of missing libraries. Is the hostap driver included in the Centos Kernel? I tried with insmod hostap but it didn't work..? Is there a kernel patch with the hostap drivers? I will be glad if someone can give me ideas or directions for setting up the driver properly.
I've upgraded the generic kernel of my Xubuntu Karmic AMD64 persistent USB installation with the ubuntustudio realtime kernel (2.6.31.9.10). The thing is that the generic kernel is still loading as default and I don't have the option on the boot menu to choose the new one. I don't know how to edit this Grub2 version (grub-pc 1.97 beta 4).I haven't found a GUI package for this either.
I am building a live-cd using live-helper on Karmic (9.10). The process executes fine and I am able to build a live cd of ~200MB in size with minimal and xfce. But things does not work if I try to upgrade the kernel with the one of them from [URL] site. Ubuntu kernel team publishes the kernel for testing and I would like to upgrade the kernel for testing. But when I upgrade the kernel from inside the live-helper's interactive shell, it upgrades fine and iso gets created. While booting, it loads the kernel and errors out with the following message:
Code: (initramfs) mount: mounting aufs on /root failed: No such device. aufs mount failed.
I am running initramfs after installing the new kernel (a .deb file) using dpkg.
What else should I need to do for getting this to work?
I've never compiled a kernel before and I'm in need of the 2.6.28 kernel (two words: macbook aluminium).
I guess my biggest question is, will this guide work well for F10? I would hate to get half-way through it just to find out that F10 does something different than F08 or F09. Is there anything that you experts can see right away that would possibly be disastrous? If things do come to worse, I can simply select the previous kernel at GRUB boot right?
Or will the Fedora team be releasing the update soon through the package manager? Is there a way I can activate the development version and only get the kernel update?
I have a hand-built kernel in Lenny. It's much smaller and faster than the stock kernel and doesn't need an initrd, but I am not sure how to upgrade it in a way that will be compatible with the new udev package. The recommended procedure is to upgrade the kernel and udev together and then reboot before doing the rest of the upgrade, but obviously I can't do that.
There seem to be two possible procedures I could follow:
1) Upgrade kernel sources and rebuild and install the kernel, then reboot and upgrade udev. But then the new kernel would be booting with the old udev and I don't know if that would work.
2) Upgrade, rebuild and install the kernel, then upgrade udev without rebooting, ignoring the warning messages. Finally reboot into the new kernel.
I am finally upgrading my 8.04 to 10.04.So I downloaded the alternate CD and after starting from the running system, I ask to update without checking online for corrections.The machine works for a few minutes and returns something like "cannot check online for updates" obviously, as I told not to. At my last update, apparently some 2+ years ago, it was possible to run the system update first and once installed, let it check and download any corrections and changes. Does that not work anymore?
after upgrading to lucid lynx ubuntu doesn't boot with the new kernels 2.6.32-22-generic and 2.6.32-23-generic (also in recovery mode). But it's does boot with the previous 2.6.31-21-generic kernel. At the time i was hoping to wait it out, but a new kernel has come and the problem persisted. I've been trying to find a solution for this but somehow, amid lots of failed boot blank black screen threads, i didn't relate to any solution. The boot seems to go well until a pixelated logo appears (before the login screen), then goes to a blank black screen and there it stays stuck with no remedy. Looking into dmesg logs - albeit some differences between 2.6.31-21 and the newer 2.6.32-23 - the failed boot seems proper in both logs. In Xorg logs the differences are bigger but i cannot pinpoint a source for this problem.
i started upgrading ubuntu 9.10 and then the computer was restarted in office due to reset button pressed accidentally. when i started the machine, now the network manager is gone, and other printer connection is lost (samsung scx-4300) now we dont know how to repair since to complete upgrade i need internet connection which is missing due to this crash.can anybody help? i dont want to reinstall and loose all our settings, installed softwares and user info as well as printer setup etc. or is there anyway where i can just repair to previous version of ubuntu (restore to previous point) where things work as they were.
In sda, I have 4 partitions, and I have windows 7 in one of the extended partitions [not in the primary partition].
In sdb, I have 3 partitions. 2 for storage, and 1 10GB drive for Ubuntu. Again, Ubuntu is not of a primary partition.
I had ubuntu 10.04 running on that for a long time. However, I wanted to reinstall ubuntu and use 10.10.This is what I did EXACTLY:Booted from Ubuntu install CD
Chose advanced istall
Selected sdb3 for Ubuntu
I installed GRUB2 on the SAME partition as Ubuntu aka sdb3 Installed then rebooted
I can boot into Ubuntu fine, but whenever I select Windows 7 bootloader from the GRUB menu, the screen goes black, and my PC reboots.
Boot Info:
Code: Boot Info Script 0.55 dated February 15th, 2010 [code]....
ls: reading directory sda6/: Input/output error
I have tried the testdisk/update-grub method, but it didn't work.
With the recent upgrade kernel, my ATI driver can no longer work. After upgrading to the new kernel, upon reboot I would get stuck at the "checking battery status" and can't boot into kubuntu.
I'm running Kubuntu 10.10 64 on intel i5 with radeon hd 4870.
So I thought I messed something up since I was fooling around with conky script the day before. I did a clean install of kubuntu 10.10 64 and reset all my settings and my files. At this point, everything works smoothly and I can reboot multiple times without a problem.
I proceeded to install the Radeon catalyst driver following the documentation, which worked perfectly for me on the previous kernel. After rebooting, I can no longer get pass the "checking battery state" black screen. I had to boot into safe book, uninstall all fglrx and also delete xorg.conf to be able to boot back in normally.
When I am upgrading, installing something or doing something that requires me to be Authenticated by using my password I just type it in and hit enter. However, each time I just click return after typing in the password it does not work. The window accepts my password but thats it and the window just sits there until it times out a few mins later. For this to work properly I have to type the password and then use the mouse to click the Authentication button. Why is this? Is there a way to solve this so I can just type in my password and click return like I do with everything else?
Will the LVPM utility move Wubi 10.04 onto a dedicated partition?
[URL]
The website hasn't been updated since 8.04.
If not, is there a resource that will assist me in moving my data, settings, keyring (and programs if possible) from the Wubi install to a clean install on a new partition?
I'm planning for a transition from Lucid 10.04 Wubi to a dedicated partition for Lucid Studio 10.04, but have been using Wubi for emails, XAMPP web development, etc.
there is an issue with the way the Linux Kernel addresses memory by default and the graphic drivers for my Asus G1Sn. I have a patch that I had compiled against a custom kernel for 2.6.27.xx how ever it does not work with the latest kernel in Fedora 11. It is beyond me to rewrite the patch to work with a different kernel.
I have one machine where I have several versions installed on different partitions. The base partition (/dev/hda1) is Slack 12.1. On a spare partition (/dev/hdc4) I had installed Slackware64-current. Last week I slackpkg upgraded and installed the 2.6.32.2 kernel, and now that partition will not boot. I know that with the new kernels the hd* designation has been removed, and have already redone that fstab (accessing it from a different boot) to reflect the sd*. Here is the slack64 section of my lilo.conf:
Code: # Linux bootable partition config begins image = /other/spare4/boot/vmlinuz
i did it to mount my hd in the startup but id didnt work, so i want to undo it, and if somebody can tell how to make my hd to be mounted since the startup
My laptop is an HP Pavilion dv6 3078-tx. It is was a great laptop when it was running windows 7 but when I tried installing Ubuntu, I slowly began to hate it more and more. The issue is with the ATI and Intel switchable graphics card. Ubuntu installs fine and things seem to be great but I cant use the better graphics effects in ubuntu. I installed the driver that ubuntu provides for ATI and it didnt work and ubuntu booted into a terminal etc.. and I had to put it back to the way it was before. After sometime researching on the internet I know the problem is with the swtichable graphics.
Unfortunatley there is no option to turn off switchable graphic in my bios and hp arent much of a help. I dont know what to do now ? Is there any way to get switchable graphics to w ork with linux, is there way to get version of the bios that lets me disable it ? any variations of ubuntu or linux that it works with. I would prefer to use the ATI if i have to disable one or the other cause Im usually running on ac power anyways.
Maybe saying Ubuntu is getting worse is unfair. I'm not a big user I have to say. I use it more out of curiosity than anything else. I first used 8 and it was brilliant. I told all my mates about it. Everything work great. I had all desktop effects. I could use a KDE session. Then I upgraded to 9 and lost KDE ability but still had all desktop effects available. Upgraded to 10 a few weeks ago and now no desktop effects. Non of the above is a problem but I feel like, for me, it's going backwards.
I use an old AMD 2600 machine with a Radeon 9600. I used to be able to use ATI Catalyst but that didn't work after the upgrade to 10 and I can't seem to find a solution. Ubuntu is still brilliant but I don't like things being taken away from me.
I tried "gksudo nautilus", and it didn't work! When the root window pops-up, it isn't there! I would like to delete this annoying file so that i can see my whole desktop.
i have MB:Gigabyte 770t USB and Cpu Phenom II x2 555 BE My sound card didnt work and i have no sound at alll. only hardware that reconized as sound output in my sound setting is 5700 series HDMI which blong to my VGA.
I recently noticed some of my one-liners with && and || didn't work as I expected so I googled for "bash && || pitfalls" and found this page [URL] It's probably my fault, but I still don't understand why it wouldn't work as I want it..... I don't even have the code anymore that wasn't working properly because I rewrote it using if ; then ; command ; fi
Just installed CentOS 5.4, had no problems until the first time it tried to login, where the keyboard didn't work. There are bugs logged on both the CentOS site, and the Red Hat site, but nobody seems to have a definitive solution (other than buy a USB keyboard). Bearing in mind that the machine in question is not hooked up to a network (i.e. no internet updates), is there a way to resolve this issue?
