OpenSUSE Install :: Without Deleting The Windows 7 Reinstallation Partition On Acer Aspire
Feb 24, 2010
I have Windows 7 and openSuse on my Acer Aspira 5532. I find that after using it, I'd rather get rid of Windows 7 all together. However, I want to be careful not to remove the partition that has the Windows 7 Reinstallation boot disk just incase in the future I wish to go back to Windows. Is there a way I can make my entire computer Linux (no dual boot) but also not deleting the Windows 7 reinstallation partition?
Further, can someone example why, on Boot, I have like 5 options to choose from? Like two openSUSE versions, failsafe, Windows 1, and Windows 2....? To be honest, when I installed openSUSE, I just did the recommended partition job that it suggested. I don't know much about partitions.
I was dual booting windows 7 with opensuse 11.3 and then realized I wasn't ever using Opensuse. I then deleted the partition it was in and now I cannot boot into windows. Grub immediately takes over upon booting but doesn't detect any partitions. I tried booting from an opensuse cd and changing the boot order priority, but grub still comes up. I don't have a windows 7 installation disc
i bought an Acer aspire one through an official acer website and i got it for cheaper than a XP one, i got it with Linux on it. As i am someone that looks for a great deal. i took it, I then realized that Linux is pretty hard to operate.can i replace linux with window?
I recently installed openSuSE 11.2 on an Acer Aspire One, but when the installer try to start the new kernel with kexec it hang up, and if I reboot the system it hang up always, also says that the Acer BIOS is unknown.
Had the RC versions of 11.2 running on my laptop but now the release version is out X no longer installs properly, it gets so far through the installation but then goes to a black screen which is totally unresponsive. If I force a power-off/on it only comes up in text mode and I cannot get X to start automatically. I can get startx to work if I manually reconfigure sax2 using 0=radeon but no way can I get this to happen at startup. Seems a very retrograde situation and something that completely got past quality control.
Probably the end of my time with OpenSuse having been a user for over 5 years, at least Ubuntu installs straight in with no problems whatsoever - exactly what I would have expected from OpenSuse.
I'm absolotly not sure, if I'm right here. During start I see the message "unknown (unsupported) BIOS version Acer/Aspire 6920/V1.14 , please report, aborting!"but I did not found any Mail or URI, where I can report this one. So I paste the partof the boot.msg here. Hopefully it will be on the right place. If not :
had a dual boot system with openSuse 11.1 and Windows XP working OK - Linux boot loader was where OS selection was made (openSuse was installed after Windows) Last week I had to reinstall Windows and this removed the Linux loader from MBR and Windows booted automatically. I wanted the Linux boot loader back,checked the threads about boot loader restoration and did the following:
- downloaded Knoppix 6.2.1 ISO and burned to CD - booted with CD - opened terminal with root privileges and typed: grub (ENTER) grub> find /boot/grub/stage1 (ENTER) > (hd0,2) grub> root (hd0,2) (ENTER) >Filesystem type is ext2fs, partition type 0x83 grub> setup (hd0) (ENTER)
setup was successful (no error messages)
Now when booting, i have an error that root (0,3) can not be mounted and "Press any key to continue"??? When hitting any key I see that there is GRUB there with all entries as in original state (Suse 11.1 and Windows) but only Windows can be booted. Then I downloaded live eval of openSuse 11.1 and did the same (booted from CD and run same commands from terminal as root) - again no errors but still "root (0,3)" can not be mounted..
I started withsda1 windows restore sda3 extendedsda5 swapsda6 /mandrivasda7 /SUSE 11.3 sda8 /SUSE 11.2I then made some changes with gparted (from PartedMagic 5.5) to create an ntfs partition to simulate a condition where someone may want to delete that partition and use the free space for linux. I then deleted that partition, sda2 then sda5 (swap) and taking some screenshots, went about resizing partitions to use that free space and then recreate swap. the intention being to create a basic guide on how to go about this.I have previously only had my swap at the end of the extended partition, deleting itand recreating it later had caused little trouble.I realize that a resize/move operation would have been a better choice.What I was not expecting was the partition number changes that occurred.
Code: root@PartedMagic:~# fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes
I'm thinking of buying an Acer Aspire D250 loaded with Win7 and then adding a version of Ubuntu.
The netbook will come with the Acer recovery facility to reinstall Win7 from a recovery partition in the event of OS failure. This means that the MBR and subsequent loaders need to be preserved for this function to remain (I don't have a Win7 disc and don't want to have to buy one).
I'm happy with a basic Win/Linux dual boot setup but I'd value any comments/suggestions as to how to preserve the recovery function when I add Ubuntu.
I am currently running a dual boot machine with Ubuntu 11.04 and Windows Vista.Is there any way I can delete the Linux partition and Grub boot loader without affecting the Windows partition at all?I would also like to be able to repartition all of the space that was previously occupied by Linux.
I tried to install ubuntu 10.10 NBR on an acer aspire one and the install crashed, it is a known problem but my main problem is that the 250gb SATA is partitioned in two and then i deleted linux swap and the ubuntu 10.10 partition to make free space.
a) how can i resize the windows 7 (dreadful OS) to what size it originally was b) if i install an older version of ubuntu (10.04) will it boot up as if i chose the partition alongside other OS or will i have to install a bootloader (I have never done a specify partitions install) C) is it that acer aspire one's cant load any version of ubuntu (I know a mad idea as ubuntu has many drivers and should work with it.)
I have reinstalled the suse and am unable to get "lvm info".........am very upset and is running server. how i can get lvm back, i did not format those drive and they are different storages from server.
Windows 7 x64 was the only install with a separate boot partition which was already on the Dell laptop. I then shrunk the partition to allow me to put opensuse on. Then I made the stupid mistake of deleting the opensuse and boot partitions while in Windows. I was going to do this, copy pictures of my new born baby off then reboot and delete all stuff and redo all the partitions and installs again.Now I just get grub rescue with the following when I do ls command:(hd0) (hd0,1) (hd0,2)I would like advise on how to get the data off, I cannot afford to lose my babies pics as there are no other copies. I will then do a normal install of opensuse first then Windows 7 after it.
I am trying to install Fedora 12 on an Acer Aspire AMD 64 2 with 1 GB of memory.
I downloaded the Fedora 12 live CD Fedora-12-X86_64-ISO.
When I try to boot from that CD, I get a message "irq 17 too bust" and the system hangs before finishing the boot process. So I have very little to go on.
Ps. I previously installed Kubuntu 9.1 without any problems.
I have an aa1 with the original set up but fire fox is to old for some sites how can I instal a new vertion Sorry, its is an acer aspire 1 with linpus, I think, it comes pre installed with fire fox but an old version.
after random chashes of openSUSE 11.3 x86_64 on my Acer Aspire 5720z I found a lot of messsages on the log
Code: mcelog: failed to prefill DIMM database from DMI data dmidecode seem ok for me Code: sharwyn:/var/log # dmidecode # dmidecode 2.10 SMBIOS 2.4 present.
Code: fdisk -l Device Boot Start End Blocks Id System /dev/sda1 1 3724 29912998+ 83 Linux /dev/sda2 29256 30401 9205245 7 HPFS/NTFS /dev/sda3 3725 4271 4393777+ 5 Extended /dev/sda4 * 4272 12104 62918572+ 83 Linux /dev/sda5 3725 4271 4393746 82 Linux swap / Solaris
I want ot install a new opensuse 11.4 as yest another OS. Due to the fact that I already have 4 sda partitions, I have to make some changes. What I am thinking about is to copy the sda2 (windows recovery) data to some folder etc (nevermind), then delete the sda2. Then I want to create a new primary partition for the new suse 11.4 and install it. What is worying me is the grub boot menu. I was planning to edit the new one (the opensuse 11.4), with old data.
Code: ###Don't change this comment - YaST2 identifier: Original name: linux### title Desktop -- openSUSE 11.2 - 2.6.31.5-0.1 root (hd0,3) kernel /boot/vmlinuz-2.6.31.5-0.1-desktop root=/dev/disk/by-id/ata-Hitachi_HTS542525K9SA00_080105BB0F00WDHE41DC-part4 resume=/dev/disk/by-id/ata-Hitachi_HTS542525K9SA00_080105$ initrd /boot/initrd-2.6.31.5-0.1-desktop .....
Now my question is will the settings of (hda0,n), change due to the fact that I have deleted the sda2? I have a lot of unused space at the end of my disk and want to create a new "sda2" there.
I have been attempting to install Ubuntu 10.10 on my Acer Aspire One for a few days now. Its current OS is Win7 Starter, if that even matters.
-I made a USB drive and Ubuntu boots and runs just fine.
-I hit the "install Ubuntu" icon and it has me choose my language, then I hit forward.
-It asks if I want to install updates and/or third party apps, I check the boxes and hit forward - and then it just sits there with the cursor spinning like its trying to do something, but it never does. The longest I have let it sit there was four hours, and still nothing happened.
**This is the step it always stops on. Could the problem be that I am trying to install the desktop version instead of the netbook version? I tried the netbook version and I just don't like it as much.
After loading Ubuntu 10.10 on an Acer Aspire 5100, I find that the onboard LAN does not work. My router "sees" the laptop but my laptop does not "see" the router. Ubuntu says that the firmware is not installed.
I read earlier posts about an issue with Broadcom and later editions of Ubuntu but I haven't seen a definitive fix. With the LAN not working, it is not possible to connect to the Internet and further compounds the problem. My understanding is that the Acer Aspire 5100 uses a Broadcom LAN. How can I install the firmware that it is asking for?
I have a Laptop PC Acer Aspire 1710 and OpenSuse 11.2 installed on it I tried to setup my wifi card but it doesn't workI checked the log system log file.Apparently the driver cannot be loaded :
<6>[ 8.556483] b43-pci-bridge 0000:03:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 <6>[ 8.560204] ssb: Sonics Silicon Backplane found on PCI device 0000:03:03.0 <6>[ 8.581966] cfg80211: Calling CRDA to update world regulatory domain
Acer Aspire S7-391 laptop, 64 bit install Previous was Debian 7.6, no issues.
Not doing anything special, just browsing the web and I get a few of these soft lockups. Cannot reboot, have to power it off and on when it happens. USB stops working also.
I wonder if you can help me please. I purchased an Acer Aspire One netbook running Linpus Linux on it for my daughter. She absolutely love it and so far I have managed to update Open Office to Open Office 3.0.1, installed Skype and installed Firefox 3.She has been doing her homework and would like to print it off but I can't get my Epson DX8450 to work with it. I tried installing drivers from http://www.avasys.jp/lx-bin2/linux_e/spc/DL1.do (which is where Epson tell you to go). I installed some drivers and the printer started to print it was doing some strange things like printer two lines of the same single line, missing the top off the letters and putting two line spaces in between each line.
I am all new to this but does anybody advice or even provide step by step instructions on how to install the printer (if they have this model printer themselves).Also how to I remove the drivers that I installed last night that obviously are incompatible?
I have F11 running on my Acer laptop and I'd like to install F13 on a newly created partition.I have downloaded the DVD install a couple of days ago and tried to boot it using different options, but always failed. Below my attempts:
1) first option (Install or upgrade): it took a looooong time (like 4 or 5 hours) to get to the Loading vmlinuz message; after a couple more hours it was still there (with 4 or 5 dots more) and I decided that enough was enough;
2) second option (basic video driver): I tried it with and without the nomodeset option and in both cases the Loading vmlinuz message was immediate, but couldn't get past it;
3) first option (Install or upgrade) with the nomodeset option: again the Loading vmlinuz message was immediate, it added up to 10 or 11 dots and then hung;
4) I also tried to boot the same DVD on another laptop (just to rule out media problems) and quickly reached the first install screen, so the DVD is ok I think.
Note that in ALL the above described attempts, when the boot process hang I see my HD led constantly on and also the DVD led flashing.
I newing to utilize linux I want to ask I install redhat enterprise 4 4 on laptop acer aspire 4736, and all hadware I am not detected comprise wifi card and lan card. how detects my hadware that? one again of making ad-hoc at ubuntu 7.10
STEP 1) Install Slackware 13.1 (everything works out of the box*) Gotcha: 3d isn't enabled in X Fix: Yes it is... run glxgears from a console or run glxinfo | grep render.
Gotcha: No CD drive to install from Fix 1: Get a usb CDROM drive Fix 2: Boot off of a thumbdrive using the usbboot.img (found on disc 6) Gotcha: Card Reader (ENE Technology) doesn't work Fix: You have to use the MMC driver-modprobe mmc_core modprobe sdhci modprobe mmc_blockIt should now show up in dmesg and /dev/mmcblk0p1 should be created if it is an SD card. NOTE: SD Card portion works using SDHCI driver. NO DRIVERS for XD and MS cards yet. *Card reader is gimped due to ENE Technology being evil.
i can't seem to get a fresh install to boot on a Acer Aspire T160 desktop computer, after the install finishes (basic install, command line only) it gets past 'Verifying DMI Pool.......' but then nothing, it just hangs, no Grub messages, nothing. Here is my hardware/config
i have tried RAID1 and RAID0 for md0, no change, i've also disconnected the raid all together and just installed on the IDE drive, still nothing. I noticed the BIOS supports hardware RAID but i have that disabled from past experiences and opting for software raid instead. i've gone through 'linux rescue' and reinstalled Grub, rebuilt raids and checked disks.
an interesting thing happens tho if i just have the IDE drive plugged in and nothing else... i get a BIOS message asking to plug in a bootable disk, does this mean it doesn't see my linux install at all? doesn't know to pass the boot along to /dev/hda?
i'm running out of ideas, tho neither have i tried installing to the raid... nor have i tried any other distros (Fedora, Ubuntu) on this machine yet.
I just installed oS11.3 on a new Aspire Revo R3610 which has the Intel Atom 330 chip and Nvidia ION graphics.
I noticed that the CPU is always running at 1600Mhz and doesn't throttle down when there is no load. Do the Atom cpus not throttle down or is there a setting in 11.3 that I can change?
I want to delete the first two partitions (a 243 MB Linux swap partition and a 5.87 GB root partition). Problem is, every time I deleted them, Windows would also delete Drive G: and H:, leaving only drive F: intact. Deleting the two Linux partitions using GParted from a Live CD also gave the same result. I've attempted this multiple times now and, after each attempt, TestDisk always managed to recover all the deleted partitions.
Any ideas on how to delete these two partitions without affecting the rest?
